I am using Windows 8 64 Bit and have lost the password for the Administrator Account (Local). I am only able to login using the Standard Account and unable to create any more admin accounts or make any changes, I am even unable to perform the Gateway Recovery as its asking for the Administrator Password. I even can't enter the BIOS to disable the Fast Boot or change the First Boot to USB so that I can use any other Image of Windows 8 to reinstall.
I have a desktop with Windows 8 upgraded to 8.1, I can enter the BIOS setup by pressing the DEL key only when the preceding shutdown is a complete shutdown (shutdown with fast startup turned off).
If the desktop is shutdown with fast startup turned on (incomplete shutdown), and Windows cannot be loaded during the subsequent starting. How can I enter the BIOS to select to boot from a USB stick?
I have a Gateway desktop computer about a year old. It had been working perfectly, but today when I restarted it, I got an error message saying " no boot disk has been detected or the disk has failed." At the bottom of the screen was a message saying to use the delete key to enter BIOS set up. I went into the bios set up, but didn't see anyway to check my hard drives...
I had a picture password, but it hid itself, since I got it wrong to many times. I do not have a pin password, regular password, password reset disc, and I cannot enter the bios. So my question is, how do I get to my picture password, without a the choice to enter my computer, since I forgot my password. Let me give the details. I go to my picture password, and get it wrong to many times, so it then closes the window and goes to the regular password screen, but there are no sign in options. But In the password settings it says the picture password is still there, so is the picture password hidden, deleted, or do you have to be in the password settings to get it back? I have forgotten my regular password, and do not have a pin password.
I have a CM6730 Asus PC with a P8H61-M PRO/CM6630 motherboard.
I was having problems getting good Graphics performance and the topic of Integrated vs discrete GPU came up, the options in the BIOS were set to use iGPU, since then I do not get the option on boot to enter the BIOS.
I have tried ASUS but they want me to send the unit in for repair.
I've already used netplwiz and the box is not checked but I still have to sign in. I have two options...sign in with windows 8 or Microsoft passwords. I am the only user in the house... I don't want to have to put in a password every time I boot up. Is there another way?
I just built a desktop with a sabertooth x79 motherboard, and am running Windows 8.1 pro 64-bit. When I click the UEFI BIOS Firmware live tile via the change PC settings>update and recovery>recovery>etc. my computer reboots normally to Windows and will not open BIOS. I have tried accessing it using the delete and f2 keys, but this does nothing either.
I am up to date in terms of my BIOS, and am definitely running UEFI and not legacy.
I accidentally deleted my Fast Boot boot options and when I enable it my laptop restarts and shows the BIOS, without booting into my system(s). However, when I enable CSM boot it gives me option of booting into my systems. I want to restore my Fast Boot options so my laptop boots up faster and basically because my laptop is made for Fast Boot.
I have Asus Maximus V formula z77 with latest EUFI firmware, and EVGA GTX 680 classified with EUFI firmware. Bios is set to fast boot etc, and it is enabled in windows, but I'm seeing no difference from before. I was using boot racer and seeing 11-14 second windows load times with another 10-15 til desktop. Averaging around 28 second boot speeds, whether from a fast boot shut down or a restart. My OS drive is a Samsung 840 EVO 250GB.
My windows 7 booted faster on an OCZ Vertex 4 128GB.
I've now optimized my remaining Windows XP system --removed all the junk and duplicate programs which run on later versions of Windows so I've got a nice small tidy XP system -- basically Scanner (old canon photo scanner N1240), some VINYL editing and cutting software, OCR software, Minidisc software (still great for portable RECORDING !!) and an HP plotter and one or two odd programs. I don't need Photoshop or office any more in the XP system nor Ms Office, and I don't bother with the Internet on it either so no security problems there.
I've kept connectivity for printing (Epson 1400 printer) - the whole OS is 12 GB and it boots up in about 2 Secs (a VM running from a Linux host) --I've allocated it 1 GB - I'm sure I could run it in 768 MB too.
On my 8GB laptop it runs fine concurrently with a Windows 8.1 VM (allocated 4GB RAM for that) both on a Linux Host.
Windows to go doesn't seem to have a Fast boot option -- Not a real issue since I use an SSD for this but just curious. I suppose if Windows to Go is being used on different computers and the idea is to use the external device totally then it obviously doesn't make sense to store a file on the Host PC's HDD.
Anyway two screenshots -- you can see the Windows to Go doesn't have a fast boot option. Ist screenshot is from Windows to Go -- both running Windows 8.1 enterprise update 1 x-64 on REAL (not Virtual) Machines.
I recently installed windows 8.1 and there is a problem with the windows Fast Start up (hybrid boot) feature as sometimes it works and windows starts very fast and sometimes it doesn't starts fast but just take sometime to start as if I started from a cold boot. I tried everything from inside the windows to solve this problem but nothing worked
I read in some threads that this fast boot technology works by saving the system into a hibernation file in the system drive when you shutdown the PC and at boot Hybrid boot well just use this hibernation file to start up faster by loading some system related files from it.
So I thinks that sometimes it loads the information from the hibernation file to load the system fast and sometimes it doesn't load anything from the hibernation file and load as if it was starting on a cold boot.
For a few days I have been having some problems with my computer. Whenever I shutdown properly and then start again, the Desktop loads fine and after a few seconds of coming to the desktop. I see a black screen in front of me, I try to press num lock on and off to see if the system froze, it indeed froze. I disabled fastboot, after that even if I start after shutdown, it boots fine.
If I restart, it boots fine. Not sure why as my system should be fully compatible with fast boot. Here is my system specs, everything is updated as of posting:
MSI Z87 - G43 Gaming Motherboard with latest BIOS Sapphire TriX R9 290 OC Samsung 250GB 840 EVO 8GB RAM
i have problem with my dualboot. When installing ubuntu 13.04 and window 8 along each other, windows 8 won't hybernate (screen just gets blank and lock itself), tha same with turning computer off (when fast bootup is enabled). When i recover mbr using bootrec.exe /fixmbr (basicly switch back from GRUB2 so i cannot boot into linux) everything works fine.
I have Lenovo Essential G480 core i5 released in 2012 . In Bios settings it shows only "UEFI enable or disable " . I enabled it and installed Windows8 in uefi boot Using uefi enabled usb . I read on internet that Laptop manufacturers name appears instead of Windows 8 logo on uefi boot, it does not happen in my case also booting has gotten more slower .. and computer is not as smooth as it was before with old bios , it stuck sometimes now..i also checked my bios by "msinfo32" it shows my bios is UEFI... still its not like the real thing at all ...
I just got a refurbished ASUS K75DE laptop, and it came with Windows 8 on it. I am wanting to run a dual boot with Win7, so I disabled fast-boot just fine, and went into the UEFI BIOS and disabled the secure boot.
While I was there, I did like I have always done and set a BIOS boot-up password. I then proceed to boot to my Win7 installer USB Flash drive, but I was running low on battery power so I aborted the install and shut the computer down to try again later.
Now however when I get into BIOS to select boot priority, all options are grayed out except for system time and a few other non-essentials. At the bottom of the first BIOS screen it says "User Level : User" and I can't seem to find a way to reverse this issue. So now I'm stuck, can't boot to anything but the HDD because it is first by default.
.I have an HP Pavilion Slimline PC desktop. It does not allow me to boot from CD/DVD drive or USB connection. Windows 8.1. I wish to be able to use the boot options cd/dvd and all the USB options. I can't use any of the options. I list bios setup options and suggestions given to me from articles but I'm not sure I'm afraid of error. I don't have that much experience in bios setup.
Articles have said in BIOS setup Security is to be disabled. I suppose Legacy remains disabled(?). It is suggested that I shutdown and reboot.
BIOS Setup > Storage > Boot Order has this list: UEFI Boot Sources Windows Boot Manager USB Floppy/CD[code]....
At bottom of this Boot Order Window are the options: F5=disable Enter=drag F10=accept ESC=cancel
Windows Boot Manager at the the top stops all other options.beneath it. How does that 'drag' work. Don'tr I have to move 'Windows Boot Manager' to the bottom?
And move ATAPI CD/DVD drive to the top? of this UEFI boot sources list?
Is it true that if there is an error in the BIOS Boot Setup and Windows 8.1 does not boot, the BIOS Setup will come up instead so one can do a fix?
Last night before going to bed my laptop said it was going to update within a day. I closed the lid as usual and the next day, when I opened it, it was stuck on a blank screen for a few minutes then up came the Asus screen, then into Automatic Repair, then Diagnosing your PC, then "Repairing Disk Errors. This might take more than an hour to complete."
I let it run for about 4 hours but with no effect. I tried a few times to no avail. No matter what I do - F8, F10, F12 - I can't do anything other than get into Bios. I fiddled around with some options, but there weren't many and nothing worked. Finally, I removed the hard drive and attached it to another laptop with a caddy and couldn't get in - it is corrupted and unreadable.
So do I simply need a new hard drive? Or is it possible the problem is even worse? A friend says he has a tool that might be able to retrieve some of my files, but at least my most important ones are in Dropbox.
The other concern I have is that even when I install a new hard drive, I don't know how to get an operating system back up. The laptop didn't come with a disk. How do i go about installing an OS? Windows 7 would be preferable, although it did have 8 on it previously.
The laptop is Asus Ultrabook S400C. It doesn't have an internal cd drive.
I have a pretty new computer. Just a few months old. It is supposed to be a good one.
Dell XPS 8500 Quad core i7 processor lots of memory and extras
This computer also has the 64 bit edition of Windows 8 installed on it. Windows 8 is driving me up the wall!!! I have had numerous problems with it since day 1.
As recently as a few days ago, my system was running reasonably okay. Then I downloaded a driver for my network card from the dell.com website. From that point on, I cannot get my computer to boot up properly. I have turned my computer off and on multiple times in hopes that it would correct whatever is wrong.
When I first turn my PC on, it will stay stuck at the Dell logo window for a while.
Sometimes it will make it past that and it will give me an error message that says:
"error sending end of post message to ME, system HALT!"
Also, I sometimes get a message which says:
"the last USB device you connected to the computer malfunctioned, and Windows did not recognize it.
Try reconnecting the device. If windows still does not recognize it, your device may not be working properly."
This is insanity. I have NOT connected any new USB devices to my computer.
I do not know what to do. I figured that the easiest thing might be to try simply reinstalling Windows 8 from scratch. So I inserted my Windows 8 reinstall disk that Dell sent me when I bought this thing. However, my computer will not boot from this disk. So I guess I am stuck.
Dell Inspiron 17R 5721 OS Name Microsoft Windows 8 Version 6.2.9200 Build 9200
Processor Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz, 2401 Mhz, 2 Core(s), 4 Logical BIOS Version/Date Dell Inc. A03, 10/24/2012 SMBIOS Version 2.7 Embedded Controller Version 1.01 BIOS Mode UEFI
Secure Boot State On Boot Device DeviceHarddiskVolume1 Installed Physical Memory (RAM) 8.00 G
As so many others have written, I can't change the boot-up order which means at this time, I can only boot from the hard disk.
I am hopeful that it is my ignorance that prevents me from accessing and changing the order, and that some good hearted soul will set my down the right path.
I'm trying to boot from the bios into a Windows 8.1 Recovery USB. When it loads it just goes to a black screen with moveable mouse pointer and will sit like that endlessly. However when I boot with an Acronis USB for example everything comes up on screen fine.
Why this is happening or what it indicates?, all this is occurring outside of Windows so things like drivers shouldn't be affecting the display.
When I turn the power on, my desktop PC (a Hewlett-Packard) goes into a BIOS startup routine that says "Preparing Automatic Repair" and then "Diagnosing Your PC" which has to finish before it will load Windows or any OS. I've seen it before, and usually it just takes a few seconds. But now it's stopping at the "Diagnosing" message and won't go any further. I turn it off and on, and it does the same thing again. I can get into the BIOS menus and choose other options like booting from another drive, recovery options, etc. but no matter what I choose it starts the BIOS over again and gets hung up on the "Diagnosing" step, so I can't boot ANYTHING.
Any way to bypass or break out of this BIOS startup loop so I can get to Windows?
I have an error message at boot time that says [fail] twice then boots normally.
I have tracked it down in other posts to the bios which I change and it works for awhile but then mysteriously changes itself back.
Here is what I do. F2 at Dell logo move tab to "boot" Reorder the boot order to the following: Windows Boot Manager UEFI Onboard LAN IPv4 UEFI Onboard LAN IPv6
then save and exit machine reboots without error message Runs/boots fine for awhile then message reappears. Going back into BIOS shows Windows Boot Manager has moved to the bottom of the list again.
I have Samsung slate xe700t1a and recently downloaded and installed the lates bios from Samsung. After the installation the machine rebooted and all I get is black screen. Not even the Samsung logo, just the blue power led light comes on. I have tried all the button combo boot up power windows key, vol up and down and nothing can't even access the bios. I contacted support and that was a waste of time. Maybe removing ssd drive and connecting using mini sata to sata cable on my pc.
Accidentally switched off my computer. Now I can only get Windows 8 to load if I select the disc with Windows 8 on it from the boot menu.
If I look at the actual BIOS settings the HDD is stated to be disabled.
The main board is a Gigabyte GA-Z77 and the disc is a Crucial M4 SSD.
I tried getting the BIOS to reload but that made no difference.how I can enable the SSD again so that I don't have to go through the boot menu each time I start the computer.
Bought a new laptop with preinstalled Windows 8, didn't like it, went into laptop bios, think i deleted some drivers or commands to get me into windows 8 again. dont see any driver options, boot options priorities and cant add new ones
Think i deleted the default one, have nothing under boot options. Once I started the machine it goes right to the bios the boot devise driver into windows i think is missing.
Unrelated images not mine, but kinda looked like this: [URL] .....
