I'm trying to boot from the bios into a Windows 8.1 Recovery USB. When it loads it just goes to a black screen with moveable mouse pointer and will sit like that endlessly. However when I boot with an Acronis USB for example everything comes up on screen fine.
Why this is happening or what it indicates?, all this is occurring outside of Windows so things like drivers shouldn't be affecting the display.
So, I got a Inspiron 3537 i5. Nice laptop for it's price. Downloaded all the manuals, made my recovery DVDs. All was well in my world.
First thing I noticed is that there is no info in the manuals for tweaking the BIOS and since it is my first experience with a UEFI bios I was a bit disappointed. Is there a manual available for it?
Next I upgraded ATI Drivers to 13.12. I am an old user who always knew that updates were usually a good thing to do. Got in the same problem as many others with PC screen not waking up from sleep.
Thought I would do a recovery from the disk, but after trying various combinations (Ctl+F11, F8, F12 etc) I couldn't find a way to boot in the Recovery console. I did the recovery from my DVD and the laptop works fine.
How to add in UEFI bios a boot option to the Recovery partition? I undersstand that I have to create a new boot option using "Add boot option" and the two options available are to boot to the 1st (windows EFI) or 2nd (recovery partition), but the path for the recovery efi file to be loaded is unknown (+ you can't have access to the recovery partition to see the contents of it from windows).
These are the steps I've taken-- OS Win 8, pre-installed by Acer.
1) Make recovery USB using the Acer recovery wizard, with the laptop in stock configuration.
2) Install msata as secondary drive
3) Go to Computer management and initialize the msata and format with GPT style. Format the drive, assign a drive letter. (I only see 1 partition). I did this as NTFS/default allocation size. Is this where I went wrong?
4) Remove the factory HDD (listed as HDD0 in BIOS)
5) Boot to BIOS
5a) in BIOS, disable secure boot.
5b) Go to legacy mode
5c) Set msata (HDD1 in BIOS) as #1 in boot order
6) boot to USB recovery drive, follow steps to restore from USB (clean install, make partitions as it wants)
7) remove USB, reboot.
Error message-- no bootable device. I can basically load the USB again or the BIOS.
I tried updating to Windows 8.1 Update 1 and in didn't go through properly (it hard froze and crashed) and now won't boot past the BIOS. I cannot get into Windows and I cannot get into the Recovery Menu.
I tried recovery USB's and any I create either from a 3rd party or Windows itself results in loading to a black screen with a mouse cursor. Only one worked, Acronis (probably because its Linux) and it showed all the drives ruling out a hardware issue but sadly it cannot repair Windows.
So it seems I might be a victim of the black screen issue some had when moving to Update 1.... BUT the difference is I cannot boot into the recovery menu at all and any recovery media boots to a black screen.
How to get out of this screen and actually boot into anything which will allow me to try to fix the MBR or go back to a restore point.
I thought the point of recovery software was that it loads no matter how corrupted Windows is... obviously not! Something is stopping all of them booting properly.
I have an Acer Aspire laptop which has recently stopped booting up. It doesn't display anything when powered on. I know it is not a problem with windows because it doesn't even display the Bios boot screen. Why is this? The fans start but I cant hear the hard drive.
View 4 Replies View RelatedI just built a desktop with a sabertooth x79 motherboard, and am running Windows 8.1 pro 64-bit. When I click the UEFI BIOS Firmware live tile via the change PC settings>update and recovery>recovery>etc. my computer reboots normally to Windows and will not open BIOS. I have tried accessing it using the delete and f2 keys, but this does nothing either.
I am up to date in terms of my BIOS, and am definitely running UEFI and not legacy.
I just got a refurbished ASUS K75DE laptop, and it came with Windows 8 on it. I am wanting to run a dual boot with Win7, so I disabled fast-boot just fine, and went into the UEFI BIOS and disabled the secure boot.
While I was there, I did like I have always done and set a BIOS boot-up password. I then proceed to boot to my Win7 installer USB Flash drive, but I was running low on battery power so I aborted the install and shut the computer down to try again later.
Now however when I get into BIOS to select boot priority, all options are grayed out except for system time and a few other non-essentials. At the bottom of the first BIOS screen it says "User Level : User" and I can't seem to find a way to reverse this issue. So now I'm stuck, can't boot to anything but the HDD because it is first by default.
.I have an HP Pavilion Slimline PC desktop. It does not allow me to boot from CD/DVD drive or USB connection. Windows 8.1. I wish to be able to use the boot options cd/dvd and all the USB options. I can't use any of the options. I list bios setup options and suggestions given to me from articles but I'm not sure I'm afraid of error. I don't have that much experience in bios setup.
Articles have said in BIOS setup Security is to be disabled. I suppose Legacy remains disabled(?). It is suggested that I shutdown and reboot.
BIOS Setup > Storage > Boot Order has this list:
UEFI Boot Sources
Windows Boot Manager
USB Floppy/CD[code]....
At bottom of this Boot Order Window are the options: F5=disable Enter=drag F10=accept ESC=cancel
Windows Boot Manager at the the top stops all other options.beneath it. How does that 'drag' work. Don'tr I have to move 'Windows Boot Manager' to the bottom?
And move ATAPI CD/DVD drive to the top? of this UEFI boot sources list?
Is it true that if there is an error in the BIOS Boot Setup and Windows 8.1 does not boot, the BIOS Setup will come up instead so one can do a fix?
Last night before going to bed my laptop said it was going to update within a day. I closed the lid as usual and the next day, when I opened it, it was stuck on a blank screen for a few minutes then up came the Asus screen, then into Automatic Repair, then Diagnosing your PC, then "Repairing Disk Errors. This might take more than an hour to complete."
I let it run for about 4 hours but with no effect. I tried a few times to no avail. No matter what I do - F8, F10, F12 - I can't do anything other than get into Bios. I fiddled around with some options, but there weren't many and nothing worked. Finally, I removed the hard drive and attached it to another laptop with a caddy and couldn't get in - it is corrupted and unreadable.
So do I simply need a new hard drive? Or is it possible the problem is even worse? A friend says he has a tool that might be able to retrieve some of my files, but at least my most important ones are in Dropbox.
The other concern I have is that even when I install a new hard drive, I don't know how to get an operating system back up. The laptop didn't come with a disk. How do i go about installing an OS? Windows 7 would be preferable, although it did have 8 on it previously.
The laptop is Asus Ultrabook S400C. It doesn't have an internal cd drive.
On a new Win 8 laptop I can't boot from a USB flash drive or even a CD unless I turn off secure boot in the BIOS?
This surely can't be progress?
is there a way to take picture from the whole of the monitor in bios or boot option?
View 5 Replies View RelatedI have a pretty new computer. Just a few months old. It is supposed to be a good one.
Dell XPS 8500
Quad core i7 processor
lots of memory and extras
This computer also has the 64 bit edition of Windows 8 installed on it. Windows 8 is driving me up the wall!!! I have had numerous problems with it since day 1.
As recently as a few days ago, my system was running reasonably okay. Then I downloaded a driver for my network card from the dell.com website. From that point on, I cannot get my computer to boot up properly. I have turned my computer off and on multiple times in hopes that it would correct whatever is wrong.
When I first turn my PC on, it will stay stuck at the Dell logo window for a while.
Sometimes it will make it past that and it will give me an error message that says:
"error sending end of post message to ME, system HALT!"
Also, I sometimes get a message which says:
"the last USB device you connected to the computer malfunctioned, and Windows did not recognize it.
Try reconnecting the device. If windows still does not recognize it, your device may not be working properly."
This is insanity. I have NOT connected any new USB devices to my computer.
I do not know what to do. I figured that the easiest thing might be to try simply reinstalling Windows 8 from scratch. So I inserted my Windows 8 reinstall disk that Dell sent me when I bought this thing. However, my computer will not boot from this disk. So I guess I am stuck.
Here are some of my system specs:
Dell Inspiron 17R 5721
OS Name Microsoft Windows 8
Version 6.2.9200 Build 9200
Processor Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz, 2401 Mhz, 2 Core(s), 4 Logical
BIOS Version/Date Dell Inc. A03, 10/24/2012
SMBIOS Version 2.7
Embedded Controller Version 1.01
BIOS Mode UEFI
Secure Boot State On
Boot Device DeviceHarddiskVolume1
Installed Physical Memory (RAM) 8.00 G
As so many others have written, I can't change the boot-up order which means at this time, I can only boot from the hard disk.
I am hopeful that it is my ignorance that prevents me from accessing and changing the order, and that some good hearted soul will set my down the right path.
When I turn the power on, my desktop PC (a Hewlett-Packard) goes into a BIOS startup routine that says "Preparing Automatic Repair" and then "Diagnosing Your PC" which has to finish before it will load Windows or any OS. I've seen it before, and usually it just takes a few seconds. But now it's stopping at the "Diagnosing" message and won't go any further. I turn it off and on, and it does the same thing again. I can get into the BIOS menus and choose other options like booting from another drive, recovery options, etc. but no matter what I choose it starts the BIOS over again and gets hung up on the "Diagnosing" step, so I can't boot ANYTHING.
Any way to bypass or break out of this BIOS startup loop so I can get to Windows?
After updating the BIOS to A09 Windows 8 won't boot anymore.
The BSOD reports an issue with winload.efi and error code 0XC0000001.
I have an error message at boot time that says [fail] twice then boots normally.
I have tracked it down in other posts to the bios which I change and it works for awhile but then mysteriously changes itself back.
Here is what I do.
F2 at Dell logo
move tab to "boot"
Reorder the boot order to the following:
Windows Boot Manager
UEFI Onboard LAN IPv4
UEFI Onboard LAN IPv6
then save and exit
machine reboots without error message
Runs/boots fine for awhile then message reappears.
Going back into BIOS shows Windows Boot Manager has moved to the bottom of the list again.
Repeating the fix is only temporary.
How can I set up the BIOS to stay where I put it?
I have a Dell running Win 8.1
I have Samsung slate xe700t1a and recently downloaded and installed the lates bios from Samsung. After the installation the machine rebooted and all I get is black screen. Not even the Samsung logo, just the blue power led light comes on. I have tried all the button combo boot up power windows key, vol up and down and nothing can't even access the bios. I contacted support and that was a waste of time. Maybe removing ssd drive and connecting using mini sata to sata cable on my pc.
View 2 Replies View RelatedI am using Windows 8 64 Bit and have lost the password for the Administrator Account (Local). I am only able to login using the Standard Account and unable to create any more admin accounts or make any changes, I am even unable to perform the Gateway Recovery as its asking for the Administrator Password. I even can't enter the BIOS to disable the Fast Boot or change the First Boot to USB so that I can use any other Image of Windows 8 to reinstall.
View 2 Replies View RelatedAccidentally switched off my computer. Now I can only get Windows 8 to load if I select the disc with Windows 8 on it from the boot menu.
If I look at the actual BIOS settings the HDD is stated to be disabled.
The main board is a Gigabyte GA-Z77 and the disc is a Crucial M4 SSD.
I tried getting the BIOS to reload but that made no difference.how I can enable the SSD again so that I don't have to go through the boot menu each time I start the computer.
Bought a new laptop with preinstalled Windows 8, didn't like it, went into laptop bios, think i deleted some drivers or commands to get me into windows 8 again. dont see any driver options, boot options priorities and cant add new ones
Think i deleted the default one, have nothing under boot options. Once I started the machine it goes right to the bios
the boot devise driver into windows i think is missing.
Unrelated images not mine, but kinda looked like this: [URL] .....
I dual boot Windows 8.1 and linux, and I was wondering how to boot into the windows BIOS. I would like to enable virtualization so that I can run 64 bit virtual machines, but it does not give me the option to boot into the BIOS. No pressing Esc, delete, F11, or F12 boots me into the BIOS. I was not able to boot into the BIOS even before dual booting.
Have a sony viao laptop with Intel(R) Core(TM) i7-3632QM.
I have a Gateway desktop computer about a year old. It had been working perfectly, but today when I restarted it, I got an error message saying " no boot disk has been detected or the disk has failed." At the bottom of the screen was a message saying to use the delete key to enter BIOS set up. I went into the bios set up, but didn't see anyway to check my hard drives...
View 5 Replies View RelatedIt has an ASUS M2N-E motherboard with an old single core AMD Athlon 64 (I cannot remember which model specifically).
Last week, I provided him with a couple of old HDDs and 8GB worth PC-5300 DDR2 667 MHz RAM. We also installed Windows 8.1 64-bit, and other than the CPU being a single core and a bit slow, things were proceeding relatively smoothly.
He has an NVIDIA Geforce 8500 on the board, and he's ordered a PNY-made Geforce GTX 650 that's on it's way at present.
He's wanting to upgrade the CPU to the AMD PHENOM X4 9950, so we've been periodically meeting over the past couple of weeks to perform surgery on this old machine.
At any rate, we found that to update the CPU, we needed to update his BIOS from the one that was installed, which was at revision 0502. The needed BIOS revision for the CPU was 1504, but would also work with revision 1701.
After jumping through several hoops to update the BIOS, we updated it to 1701. However, since then the machine will not boot into Windows 8.1. He gets an instant BSOD. I did not see the error code, so I cannot say what it was. He told me that he's attempted to do a repair install to no avail. The repair attempt results in a constant loop of the machine rebooting and BSODing.
At any rate, here are some URLs that detail the board specs and the list of BIOS revisions for that board.
Motherboard Specs: Motherboards - M2N-E - ASUS
CPU Compatibility list: ASUSTeK Computer Inc. -Support- CPU Support M2N-E
I had a bit of a problem with Malware which led me to reinstall windows 8. I had also at the time been trying to install Linux to dual boot beside it. However, upon reinstalling I got the annoying watermark saying "Secureboot isn't configured correctly." Having decided I would rather remove the watermark and having gone back into the BIOS (with a reinstall) and trying to enable secure boot I get a message - "CSM is Loaded! Disable the CSM via Setup and repeat operation after Restart".
However there is, as far a I can see no option to disable the CSM in my bios - I've tried disabling anything related to Legacy and reinstalling both Ubuntu and Windows 8 as well as wiping the drive and jumping the CMOS as well as updating the BIOS.
I've tried every permutation in the BIOS. Could possibly be an incompatibility with graphics card, but wouldn't know where to start on that end if it is.
My Acer Extensa 5620Z originally came with Vista, then I clean installed Win 7, now upgraded to Win 8. Since the latest upgrade, I am unable to access BIOS or the boot menu. The black and white boot screen used to say to press F12 for boot menu, and something else for Setup, those messages are no longer there. And those key combinations do not work. I've also tried some other combinations I've found in searches - F2, Alt-F10, ctrl F10, alt ctrl F10, F8, del, esc. None work.
Could the upgrade has modified the firmware somehow? Boot screen says Phoenix bios, TrustedCore v1.32 - I think that is the same it has been.
My bios shows uefi boot option but no uefi shell... I enabled uefi boot option and booted my dvd it asked me to partition my hd using a GPT format... I even did so so... but when I run
Code:
bcdedit /enum
In elevated command prompt it shows me this
Code:
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=DeviceHarddiskVolume1
description Windows Boot Manager
[Code] .....
The bold line means my system does not boot from efi... isn't it?
I upgraded my HP M7360N with a Pentium D 2.8 with 2gb of ram to Windows 8 and then to 8.1. It hasn't been too bad except for the video card driver, but wanted to put 2gb more of ram into it as it is a GeForce 6200 turbocache. I ordered 2 1GB pc4200 sticks which are the same as what I have in it. At first it wouldn't boot and had the ram replaced. It still didn't work and was about to send back for a refund but then put the 2 sticks in the original ram slots and it booted.
I put the original ram in the 2 slots that were originally empty and then got an ACPI_BIOS_ERROR and it said it was gathering info but it never left 0%. I am updating bios right now but the fixes listed on the update didn't say anything that I saw would be related. What can I do to try and get the ram to work.
Will it be possible to boot Windows 8 from a GPT partition using BIOS (not UEFI)? I'll be using the 64bit version.
Technically, I know it's possible as I'm doing it with FreeBSD, many Linux distros etc. Using hybrid MBR/GPT, I've read others have Win7 booting off GPT partitons as all. I'd rather not go that route.
Ok, I'm up the wall on this, I'm trying to get a copy of Windows to install on a flash drive and boot from BIOS, but there's almost now way of doing so.
I remembered that Windows 8 7850 build had or has a feature called Portable Workspace where Windows will install onto a flash drive so you can take it to any puter you please. That's great and all, but where in the blue hell is it?! :stomp: It's like it's not there. Do I need something special to do something to it or what?
Ok so i have 2 months lenovo ideapad z580 laptop..i am unable to access UEFI BIOS menu and boot menu anymore these were the steps i tried with my laptop.
1) I have windows 8.1 tried going to pc settings and selected uefi settings on restart But the problem still persist the laptop is just doing normal windows 8 boot
2) Tried pressing/hitting F1,F2,F12,DEL keys
3) I have also used lenovo one key recovery button there it showed "bios setup" when i selected it and hit enter it is just doing normal windows 8 boot still i can't access uefi bios
4) Tried updating BIOS for the laptop but unfortunately there was no bios update for this model
5) Tried resetting Laptop by removing battery and ac adapter and pressing and holding power button for 30 seconds but still no use i can't access BIOS yet
6) I tried removing the internal hard drive Out of the laptop and this time one starnage thing happened " before with internal hard drive i used to get lenovo splash screen when turning ON but after removing hard drive and when i try to access bios i can't see the lenovo splash screen at all" still i can't access BIOS!!!
7) I even have tried holding down Shift key, letter B when starting up the laptop but still didn't work seems like windows 8.1 makes changes to BIOS?
I can't enter my BIOS/UEFI after activating "MSI Fast Boot" in the BIOS/UEFI.
I read somewhere about "GO2BIOS",but my installation disk didn't came with that software.
MB: H81M-E34 (MSI Global H81M-E34)