Dell :: Inspiron 3537 - Boot To Recovery UEFI BIOS
Apr 14, 2014
So, I got a Inspiron 3537 i5. Nice laptop for it's price. Downloaded all the manuals, made my recovery DVDs. All was well in my world.
First thing I noticed is that there is no info in the manuals for tweaking the BIOS and since it is my first experience with a UEFI bios I was a bit disappointed. Is there a manual available for it?
Next I upgraded ATI Drivers to 13.12. I am an old user who always knew that updates were usually a good thing to do. Got in the same problem as many others with PC screen not waking up from sleep.
Thought I would do a recovery from the disk, but after trying various combinations (Ctl+F11, F8, F12 etc) I couldn't find a way to boot in the Recovery console. I did the recovery from my DVD and the laptop works fine.
How to add in UEFI bios a boot option to the Recovery partition? I undersstand that I have to create a new boot option using "Add boot option" and the two options available are to boot to the 1st (windows EFI) or 2nd (recovery partition), but the path for the recovery efi file to be loaded is unknown (+ you can't have access to the recovery partition to see the contents of it from windows).
I just bought a Dell Inspiron 3537 with 500 gb hard drive capacity, 4 GB RAM, no graphics card and came with UBUNTU as its OS. So I made a clean install of Windows 8.1 pro myself. All the drivers that have been provided by the site installed perfectly, except for the 1705 wireless and bluetooth driver. It says that the driver isnt for my platform .. wth :@I even tried checking my drivers via Intel and it says that it doesnt recognize my wireless card.
I just built a desktop with a sabertooth x79 motherboard, and am running Windows 8.1 pro 64-bit. When I click the UEFI BIOS Firmware live tile via the change PC settings>update and recovery>recovery>etc. my computer reboots normally to Windows and will not open BIOS. I have tried accessing it using the delete and f2 keys, but this does nothing either.
I am up to date in terms of my BIOS, and am definitely running UEFI and not legacy.
I recently called Dell support about my Inspiron 15R SE not booting and they determined my hard drive had crashed. They shipped a new hard drive to me and got me to install it but I had problems installing windows 8 as it was factory installed using UEFI.
Windows 8 setup would start but immediately gave an error about missing a media driver. The driver and utility discs I was provided did not seem to work at all. I called Dell support again but the guy I was talking to just told me that UEFI was confusing and told me to go into bios and change to legacy boot, which worked and I am now running windows 8 in legacy boot mode.
But is there a way I can reinstall in UEFI? From my brief research, it seems to be more efficient... Is there a driver I am missing that wouldn't be on the windows or driver and utilitys discs?
Doesn't seem like phone support people know much about UEFI ...
I want to download my bios update (A14) and 'Intel rapid storage' (11.6.0.1030, A02) for my inspiron 5720 but i've this message when i want download it
"Sorry, the requested file could not be downloaded.
My bios shows uefi boot option but no uefi shell... I enabled uefi boot option and booted my dvd it asked me to partition my hd using a GPT format... I even did so so... but when I run
Code: bcdedit /enum
In elevated command prompt it shows me this
Code: Windows Boot Manager -------------------- identifier {bootmgr} device partition=DeviceHarddiskVolume1 description Windows Boot Manager
[Code] .....
The bold line means my system does not boot from efi... isn't it?
Ok so i have 2 months lenovo ideapad z580 laptop..i am unable to access UEFI BIOS menu and boot menu anymore these were the steps i tried with my laptop.
1) I have windows 8.1 tried going to pc settings and selected uefi settings on restart But the problem still persist the laptop is just doing normal windows 8 boot
2) Tried pressing/hitting F1,F2,F12,DEL keys
3) I have also used lenovo one key recovery button there it showed "bios setup" when i selected it and hit enter it is just doing normal windows 8 boot still i can't access uefi bios
4) Tried updating BIOS for the laptop but unfortunately there was no bios update for this model
5) Tried resetting Laptop by removing battery and ac adapter and pressing and holding power button for 30 seconds but still no use i can't access BIOS yet
6) I tried removing the internal hard drive Out of the laptop and this time one starnage thing happened " before with internal hard drive i used to get lenovo splash screen when turning ON but after removing hard drive and when i try to access bios i can't see the lenovo splash screen at all" still i can't access BIOS!!!
7) I even have tried holding down Shift key, letter B when starting up the laptop but still didn't work seems like windows 8.1 makes changes to BIOS?
I have inspiron 14r 5420 (with windows 8 ) . I have problems with the laptop after a few days and earlier i had did recover media to 2 CDs. Now during the boot it was verifying my laptop and it say that it would reset the pc to factory backup. Will this process require a format.
I have accidentally deleted recovery drive on my Inspiron 5521 system during partition creation. My system is in warranty period. So I wanted to know how can I get recovery discs for the system .
Yesterday, after many, many problems with my computer, I finally decided to reinstall Windows 8.1 Pro onto my ASUS X200CA netbook. However, after backing up and reinstalling the OS, I found that when I tried to disable "Launch CSM" in my BIOS, all of my boot options would disappear and my laptop would continually boot into my BIOS. When I re-enabled "Launch CSM", the boot options would reappear - however, it had not included the "Option #1 - Windows Boot Manager" that I had seen in my other installation.
I recently installed windows 8 on my MacBookPro with UEFI support, but I can't enable audio. I know that apple use BIOS emulation for windows and the assign different Hardware ID's for devices.
I tried changing inf file and it detected the required audio card driver, but it shows that device cannot start. It's Cirrus Audio CS4206B (AB83) sound card, but without emulation it shows it as intel audio card. It would be easier to get back to bootcamp, but I really want to make this work.
I'm trying to boot from the bios into a Windows 8.1 Recovery USB. When it loads it just goes to a black screen with moveable mouse pointer and will sit like that endlessly. However when I boot with an Acronis USB for example everything comes up on screen fine.
Why this is happening or what it indicates?, all this is occurring outside of Windows so things like drivers shouldn't be affecting the display.
I have an Inspiron 7520 and uninstalled and reinstalled the new version of Dell Backup and Recovery Manager -- upgraded to premium to make sure that I would have full ability to use the program. Note: the old version didn't work at all -- hung up on backup, etc. I have rebooted.
When I try and open the Manager interface, I can't. All I get is the clock logo with the hand spinning. I cannot set the destination. I cannot select what I want to back up. I've tried this several times and just get the spinning clock which I end up ending through Task Manager.
I have tried opening the Manager from the installed link on desktop, from my list of programs, from the Start menu, and from the tray icon. Nothing works.
I'm just been playing with free backup tools; Macrium Reflect and Aomei Backupper, and working out which works best for me for those times when you need to boot from a Recovery CD.
I've been using a Toshiba PC which has 64-bit Windows 8 preinstalled, and is using a GPT file system. I changed the boot order so that the CD/DVD drive comes before the main HDD, if it finds a valid bootable source.
The BIOS options on the PC also include:
* Secure Boot: enabled or disabled * Boot mode: UEFI or Legacy (CSM)
I tried both Secure Boot enabled and disabled; this didn't seem to affect the findings below.
However the differences some on switching between UEFI mode and Legacy mode in the BIOS settings.
My question was whether I can boot from a Recovery CD in UEFI Mode; although the PC can access bootable CDs in Legacy Mode, it won't boot itself.
Aomei Backupper 1.6
CD was created using the Windows PE option rather than Linux. By changing to Legacy boot mode, I can boot from the Aomei CD, and it then could backup my HDD to an external USB drive. But I had to change back to UEFI boot to make the computer boot again.
Macrium Reflect Free v5.2.6444 - 32-bit.
This is similar to Aomei. I selected the option to create a CD using Windows PE (version 4). By changing to Legacy boot mode, I can boot from the Macrium CD, and it then could backup to an external USB drive. But I had to change back to UEFI boot to make the computer boot again.
Macrium Reflect Free v5.2.6444 - 64-bit.
This works! I selected the option to create a CD using Windows PE (version 4), 64-bit this time. This creates a CD which will boot in UEFI mode. I think this is because it uses the 64-bit version of Windows PE 4 rather than 32-bit.
So on this basis, I prefer Macrium Reflect Free, because it creates a CD which I can boot in UEFI mode without needing to get into the BIOS settings. It also works in Secure Boot mode.
Although this particular Toshiba seems to allow me to get into the BIOS without too much trouble by repeatedly hitting the F2 key on startup, I know not all PCs are so easy and some times when you need a recovery CD, the PC may not be functioning well enough to let you get into the BIOS easily.
These are the steps I've taken-- OS Win 8, pre-installed by Acer.
1) Make recovery USB using the Acer recovery wizard, with the laptop in stock configuration.
2) Install msata as secondary drive
3) Go to Computer management and initialize the msata and format with GPT style. Format the drive, assign a drive letter. (I only see 1 partition). I did this as NTFS/default allocation size. Is this where I went wrong?
4) Remove the factory HDD (listed as HDD0 in BIOS)
5) Boot to BIOS 5a) in BIOS, disable secure boot. 5b) Go to legacy mode 5c) Set msata (HDD1 in BIOS) as #1 in boot order
6) boot to USB recovery drive, follow steps to restore from USB (clean install, make partitions as it wants)
7) remove USB, reboot.
Error message-- no bootable device. I can basically load the USB again or the BIOS.
I tried updating to Windows 8.1 Update 1 and in didn't go through properly (it hard froze and crashed) and now won't boot past the BIOS. I cannot get into Windows and I cannot get into the Recovery Menu.
I tried recovery USB's and any I create either from a 3rd party or Windows itself results in loading to a black screen with a mouse cursor. Only one worked, Acronis (probably because its Linux) and it showed all the drives ruling out a hardware issue but sadly it cannot repair Windows.
So it seems I might be a victim of the black screen issue some had when moving to Update 1.... BUT the difference is I cannot boot into the recovery menu at all and any recovery media boots to a black screen.
How to get out of this screen and actually boot into anything which will allow me to try to fix the MBR or go back to a restore point.
I thought the point of recovery software was that it loads no matter how corrupted Windows is... obviously not! Something is stopping all of them booting properly.
I was wanting to dual boot a Dell pc inspiron 600 with win 8. I thought I will breeze through it like I used to circa WXP/Vista/W7 and didn't research what changes there might be with Windows 8. I have focused my attention more on Android and I really should have done that research.
I hadn't backed up externally docs that I needed to save - so I will remove the drive and copy the contents to my laptop to be on the safer side. So the first wrong move has led to missteps.
I downloaded Easus and created a blank disk space before the current active partition instead of behind it. I thought I needed to have win 7 in the first partition. Before rebooting I also installed a popular freeware boot selection manager (I totally forget the name but I know some most will know the one I am referring to EDIT: ***EasyBCD*** ). It gave me a warning that no bootable system was selected. I kept editing to point it to current Windows 8 but nothing changed. It also warned me that my pc might not boot. I thought I will fix it to a bootable drive with my old discs-Ultimate boot cd, CPM, etc. Easus performed creation of the new partition and then trouble started. It refused to boot.
None of my discs are working as they did before Windows 8. on UBCD Fdisk cannot find any partition it can make active. I decided not to write an new MBR. My windows 7 install CD is giving me the "Windows cannot be installed to Disk 0 Partition X" details ->"The selected disk is of the GPT partition style."
Here are the partitions
My questions are: At this point I don't mind to have only windows 7 installed or if this situation is salvageable a dual boot then I don't have to remove the drive to copy the docs. I can just boot into 7 (which is what I mainly want to use) and just have access to Windows 8 partition from there to access my docs. I would prefer not to pull the drive out if I can avoid it but only if I know for sure what I am doing.
Second question : I believe partition 3: 489GB is the newly created one and Part 4 OS would be the Wind 8 partition. How can I know for sure that this is the wind 8 partition?
If I format the partition 3: 489GB will windows now allow for windows 7 to be installed?
Is there any way I can fix windows 8 partition to boot?
Lastly the basic question is how do I fix this error so that I Can install windows 7?
I don't have any pre-created OS discs of Windows 8. My current laptop is a toshiba win 7.
I own dell inspiron 14z and i tried to install windows 8 on the 32SSD drive, i turned SATA controller to AHCI and installed the OS. Windows was booted ones and it was all fine but when i restarted the computer it consistently led to the screen "your pc ran into problem and needs to restart...." I tried turning back to ISRT and same, I reinstalled windows and turn the acceleration of but after installing the driver an error was occurred says "your computer does t meat the minimum requirements....".
I turned back to ISRT and tried to install the windows again but it could not find the hard drive even after browsing through usb (it was loading and loading but didn't find anything) and now i really don't know what to do...
I have a brand new inspiron 5447, which was working fine till yesterday. If I try to boot now, it is just stuck at Dell logo and I am unable to go into BIOS settings. I tried pressing F2 and F12, but the screen is still stuck at same Dell logo screen.
One day old Insiron R 5521 of mine has a problem. I get the error -"Recovery , Your PC needs to be repaired. The application or OS couldn't load because a required file is missing or contains errors. Error Code: - 0xc0000225 File:Windowssystem32winload.efi "
I bought dell inspiron 7520 and tried creating the additional partition on the hard drive. After rebooting the laptop started showing blue screen and saying that the file Windowssystem32winload.efi doesn't exist or is corrupt. Error code: 0xc0000225
Since the laptop was sold just with the installed windows but without the CD with windows8, I'm not able to reinstall it.
On my friend's Dell Inspiron laptop, Windows 8 will not boot. I want to boot to the repair disk to restore an image I had created. F12 on boot does not show the DVD drive as an option. I went into Setup/Boot and disabled Secure Boot, still did not show the DVD as a boot option. I went back to Setup and selected Boot List Option>Legacy. Now it shows the DVD drive as an option to boot. I booted the repair dis, went through all the dialogs to select the image I had created, but when it goes to restore it it says it cannot because the image was made in UEFI, and it is now set for BIOS.
I went back into Setup/Boot and I see that the option Load Legacy Option ROM is now Enabled, it did it on its own. As a test I set it back to the defaults and re did it as above, and again it automatically changes Load Legacy Option ROM, which I assume is what is creating the problem.
So my question is what do I need to do to boot from the Windows Repair Disk?
