I have inspiron 14r 5420 (with windows 8 ) . I have problems with the laptop after a few days and earlier i had did recover media to 2 CDs. Now during the boot it was verifying my laptop and it say that it would reset the pc to factory backup. Will this process require a format.
I have an Inspiron 7520 and uninstalled and reinstalled the new version of Dell Backup and Recovery Manager -- upgraded to premium to make sure that I would have full ability to use the program. Note: the old version didn't work at all -- hung up on backup, etc. I have rebooted.
When I try and open the Manager interface, I can't. All I get is the clock logo with the hand spinning. I cannot set the destination. I cannot select what I want to back up. I've tried this several times and just get the spinning clock which I end up ending through Task Manager.
I have tried opening the Manager from the installed link on desktop, from my list of programs, from the Start menu, and from the tray icon. Nothing works.
My hard disk crashed. I have a recovery cd created on the time of purchase. I bought a new hard disk for this purpose. Now when I am trying to recover from the same cd it is getting stuck at 40 % showing error. I searched for this error and got something as such recovery disk can work on OEM hd. As my old hd has crashed how can I recover over there. Is there any system that dell provide me with necessary operating system so that atleast I can use my system.
On my friend's Dell Inspiron laptop, Windows 8 will not boot. I want to boot to the repair disk to restore an image I had created. F12 on boot does not show the DVD drive as an option. I went into Setup/Boot and disabled Secure Boot, still did not show the DVD as a boot option. I went back to Setup and selected Boot List Option>Legacy. Now it shows the DVD drive as an option to boot. I booted the repair dis, went through all the dialogs to select the image I had created, but when it goes to restore it it says it cannot because the image was made in UEFI, and it is now set for BIOS.
I went back into Setup/Boot and I see that the option Load Legacy Option ROM is now Enabled, it did it on its own. As a test I set it back to the defaults and re did it as above, and again it automatically changes Load Legacy Option ROM, which I assume is what is creating the problem.
So my question is what do I need to do to boot from the Windows Repair Disk?
So, I got a Inspiron 3537 i5. Nice laptop for it's price. Downloaded all the manuals, made my recovery DVDs. All was well in my world.
First thing I noticed is that there is no info in the manuals for tweaking the BIOS and since it is my first experience with a UEFI bios I was a bit disappointed. Is there a manual available for it?
Next I upgraded ATI Drivers to 13.12. I am an old user who always knew that updates were usually a good thing to do. Got in the same problem as many others with PC screen not waking up from sleep.
Thought I would do a recovery from the disk, but after trying various combinations (Ctl+F11, F8, F12 etc) I couldn't find a way to boot in the Recovery console. I did the recovery from my DVD and the laptop works fine.
How to add in UEFI bios a boot option to the Recovery partition? I undersstand that I have to create a new boot option using "Add boot option" and the two options available are to boot to the 1st (windows EFI) or 2nd (recovery partition), but the path for the recovery efi file to be loaded is unknown (+ you can't have access to the recovery partition to see the contents of it from windows).
I am trying to create recovery discs from "Dell backup and Recovery application" however when i was asked to insert the second DVD,the optical drive keeps rejecting the DVD. The application will not continue to burn the second DVD and appears to be frozen. I tried with different brands/makers of DVD and also -/+ R. Unfortunately .Issue remains. I was able to find this article 593906 Published on 2013-01-21 ( relative link [URL]... ).
Although i have done the updates ,i am still not able to create recovery discs !! Current Issue: after inserting the 3rd Disc application gives the following message "Dbr.exe -No disc found" and stays there and rejects the DVD. I spoke with Dell's Greek Support team. I was told that warranty does not cover sw support even if my unit is less than a week old. Furthermore i was informed that although "Dell backup and recovery" application says DELL is not actually a Dell product thus they can't support it. They suggested my to use windows 7 file recovery instead (which needs at least 8 DVDs !).
I have a new laptop with Windows 8 and I really like it. I also have an older Dell Inspiron 1521 with an AMD 64 bit processor, 4 gig of RAM and a 160 gig SSD. It runs Win7 just fine and I believe it will run Windows 8. My new laptop came with 8 installed so I don't have a box to check the low end specs for running 8. I have Linux on it now and I would like to run both. It boots in to Linux in 20 seconds, about the same time as my new Windows 8 laptop.
I own dell inspiron 14z and i tried to install windows 8 on the 32SSD drive, i turned SATA controller to AHCI and installed the OS. Windows was booted ones and it was all fine but when i restarted the computer it consistently led to the screen "your pc ran into problem and needs to restart...." I tried turning back to ISRT and same, I reinstalled windows and turn the acceleration of but after installing the driver an error was occurred says "your computer does t meat the minimum requirements....".
I turned back to ISRT and tried to install the windows again but it could not find the hard drive even after browsing through usb (it was loading and loading but didn't find anything) and now i really don't know what to do...
I have a Dell Inspiron One 2330, which had Windows 8 Pre Installed, one fine day it stopped booting windows 8...
No matter, I had the recovery media... I made a full system restore... and nothing... it still does not boot.
Black screen after windows logo.
Dell Diagnostics accused no trouble whatsoever, all the tests performed successfully.
After a lot of tinkering, I managed to go back to Windows 7, the system runs fine, but I am running a trial license of Win 7, as I have not yet bought a license (I actually tried restoring the system using the Dell generated backup disks AND the Windows 8 OEM Disk, provided after those did not work).
What could be preventing Windows 8 from booting, since neither the installation fails, nor the HDD acuses any problem?
I have an Inspiron One 2305 All in One with touch display and was planning to upgrade to Windows 8. However, I just noticed on the Dell Support site that they do not support the upgrade, and thus, don't recommend owners of this computer doing the upgrade.
I purchased a dell inspiron 5521 a few months back but i didn't get any windows 8 CD with it. I have to reinstall my windows, but when i try to do it with my friend's original windows CD, error says product key entered is different. I don't even know the product key for my windows 8.
I'm trying to figure out if my Dell Inspiron N4010 has full compatibility with Windows 8. I downloaded the Windows 8 Upgrade Assistant. The two issues I have are Secure Boot and was touch capabilities my Dell Computer has if I decide to upgrade to Windows 8.
Since I've updated to 8.1 my laptop is taking a long to boot up and when it finally does load it's slow as hell.
I'll then be playing Football Manager and when I hit the windows key to go back to my desktop it freezes. I've tried opening task manager and that freezes too, the only thing that functions properly is the metro screen.
I thinking it's a compatibility issue with a program that's causing it.
Specs: Dell Inspiron 7250 Intel Core i7 3612QM @2.10GHz 6gb RAM Windows 8.1 Pro
Yesterday, I restored my Inspiron 15 to it's factory settings. Post-reset, I installed all drivers for Windows 8 directly from the Dell website except for the AMD driver which I took from the AMD website (just wanting to get the latest directly from the source, I guess). I also used that "Dell Detect" thingy to make sure I have all the latest drivers for everything.
After installing, everything worked great, but I realized that when the display turns off / when I shut down the laptop / when I close the lid, it does not turn off the computer or hibernating it or making go to sleep - it just keep running but there is no display, total darkness. Trying to press the power button / F4-F5 / any other button-pressing related solution did not work, only hard-reset.
Googling this issue, I found that it is very common, and many people with almost brand new Dell laptops, just like me, have encountered the same problem. In most of the solutions offered it was said that doing so would cause the system to mainly use the Intel Graphics HD card and not the AMD, meaning that for games and graphics, the AMD won't matter, which doesn't seem to be fair after paying extra exactly so I can have a dedicated card.
Either way, I started with the first which was using Windows Update. After checking the Windows Update updates list, I saw 2-graphic card related items - something called Graphics Adapter WDDM, one for the AMD card and the other for the Intel Graphics HD. After installing this update, I realized I can successfully turn off the laptop.
Once I turned it back on this morning, I got a pop-message:
I then realized that it just simply doesn't see/use/detect the AMD card. This is how my AMD Catalyst looks right now:
Looking at Everest, you can see it only sees the Intel Graphics HD:
However, device manager is still listing the AMD card as if it's properly working:
And if you look at the event log, you can see that initial driver was installed right after the Windows 8 fresh install I made a day and a half ago, and then there's other events, last night, around the time when I installed the Windows Update thingy:
I had to restore my Dell Inspiron laptop. The worst was having to download all of the Windows updates that I had installed since I bought the laptop a year ago. Is there any way to backup these Windows updates, in case (*shudder*) this happens again, I will have these ready on a disc or flash drive ready to reinstall?
I have a laptop, dell inspiron rs7720 with windows 8 on it. Once i tried to boot a different operation system from a memory stick, it didn't work, nothing happened. From that day after a first boot(doesn't matter through restart or by shutting it down) I always keep getting a quick dell logo for 1 second and then a black screen. By pressing buttons like Esc-f12 the ~Boot options F12~ appears on the right bottom of the screen. If I press F12 no reaction happens. If i just turn the laptop off by holding a button and turn it on again it boots up properly. Tried to reinstall bios, didn't work, but the bios does work. However boot options doesn't(if you press f12 at the dell logo).
I have a fairly new (bought in December) Dell Inspiron/Windows 8 that is used mainly by my kids to play games. It's minimally loaded- Windows Office, Adobe and generally starts up fast. Today they report to me that "something is wrong." On start up all I get is a grey screen. I tried F2 and F10 - no response. Doesn't even respond to Control/Alt/delete. I've searched the forums and the only thing that seems to come close is that they have possibly enlarged a split screen somehow so it's hiding everything else- but what to do? It has to get to Windows to do that, and we're not there yet.
I have a 2 month old Dell Inspiron 660 running Windows 8.1.that came with windows 8 installed but I upgraded to 8.1 off the internet. Everything worked okay until I did a scan and cleaning with ccleaner. Pretty soon startup was very slow going from the Dell screen to the lock screen to the password screen to the windows welcome screen but windows would eventually load. Now the startup only goes to the welcome screen. That little circle of dots starts spinning and keeps on spinning but Windows never loads. Did I erase some registry files when I cleaned it?
I also wanted to know how load Dos from win 8.1 and how to boot win 8.1 in safe mode.
I have bought a Dell Inspiron 15R which arrived this week. I have already decided that I am going to install my own copy of Windows 8.1 Professional on to my system.
I have tried this several times now and I keep failing. I am booting from my DVD and the install goes fine. However during install I am normally prompted to enter my Serial for 8.1 and it does not do this. It progresses as though everything is ok, I can format the Hard drive and then it proceeds to install Windows 8.1.
Once fully installed I then go to see if it is activated and to my surprise it is. It has activated with the same Serial as the OEM that came with the laptop.
I have also noticed that this copy of 8.1 cannot join the laptop to my own domain (the options to do this are greyed out) which I am also wanting to do. So this copy of 8.1 is not the copy I am trying to install.
How can I install my own copy of 8.1. I think this is something to do with Dells bios configuration but not sure where to start.
I have a Core i5 Dell Inspiron N5110 with 4 GB Ram.I tried Clean Installation of Windows 8 64 Bit (Downloaded From Microsoft Dreamspark Account) with bootable USB many times about every possible management of partitions but it goes black after the installation ,where it says "Getting Device Ready @ 62% Or 60%" , & Restarts Automatically an then it says Repairing Drive E or F, O.o even i have only one partiton of 500 GB