Hardware Drivers :: Network Driver Gets Corrupt After Every Shutdown?
Oct 8, 2013
which is about the network drivers, I am using Intel desktop board dh61ww which has its on board LAN adapter named (Intel gigabit LAN) which uses Intel gigabit network controller driver, When i bought this computer I had no issues used it about 8 months with out any problems, but now its been 10 months of total. Before 6 days some person used my computer and after that i started facing this problem that is after every reboot i have to reinstall my drivers or restore the windows to a point that i saved. I have done fresh windows on this PC(three times) also with deleting and creating new partitions but still it keeps coming up. after shutdown when I login to my windows the task bar haves a red cross on network connections icon and in device manager there's an exclamation mark on network drivers. so i have to waste my time for restoring windows or reinstalling my network drivers.
View 1 Replies
ADVERTISEMENT
Mar 6, 2014
I'd like to report a BSoD and would like to solve it. It is occurring on my Laptop a Lenovo Y510P. Almost 3 months old. Got it this January.
The BSoD only occurs during shutdown and it "Does not" happen always. I noticed a pattern though.
-I think it may something to do with my graphics tablet which I use for my work, In fact this only occured weeks after I started using the tablet. Not 100% sure though. Amazon.com : Huion H610 Pro Graphics Drawing Pen Tablet : Computer Digital Tablets : Computers & Accessories
-Had a Full Windows update before it started. Many days before it occurred though.
View 5 Replies
View Related
Mar 17, 2013
for some reason, windows 8 starts going mad (100% disk and ram usage) when i copy, highlight, or open a ~5gig mpeg2 file (hdtv recording)
right click > view image (to see full image)
no, this is NOT a disk problem...
i copied these exact same files from windows 7 the exact same day i copied them back to windows 8..
also windows 8 started going mad if i read these files from my backup drive AND my normal drive .. it happened with TWO separate files not just one and on BOTH hard drives windows 8 started with the 100% disk usage crap..
i did manage to delete both files through the command prompt, but it sure did take looong time... i then recorded another 5+gig tv show file on windows 8, and windows 8 started going crazy again ..
now my freaking hard disk does not show a normal status on a smart check!!
i'm 100,000,000% sure this is a windows 8 problem since i'm back on windows 7 using big mpeg2 files with no problems... but my f'ing smart check isn't showing good status anymore
also windows 8 loads my wrong network driver !!!
intel/windows8 loading the wrong network driver
View 7 Replies
View Related
Aug 9, 2014
Windows detects my Ricoh AC104 on a wireless network but insists it's an HP 5Si MX and installs that driver. When it adds the printer, it loads the driver automatically and without choice or prompt. Perhaps the misidentification has something to do with the printer driver in between (Hawking HMPS1U). I need to force it to use the printer driver from Ricoh, but I've had no luck so far. Some things I've tried:
1. There's an installation program with the Ricoh driver, but it doesn't see the printer on a wireless network.
2. Going to the advanced options for the printer on the device manager, I can see the driver info but Windows will not permit changes. I tried as Administrator also. No difference.
3. Attempting to update the driver just leads to Windows telling me the (wrong) driver is up to date.
View 2 Replies
View Related
Jul 13, 2014
For the past few days my laptop, a Windows 8 Samsung model with Intel core i5, has been acting up for the first time since I purchased it last year. I've been away on vacation for three weeks, and have not used it during that period, so when I returned the system naturally installed itself with new updates. But ever since then, my audio driver has not worked whenever I initially booted the computer (i.e. there is no sound); interestingly, YouTube videos also refuse to load. It is only when I restart the computer, or disable then enable the driver manually, that things return to normal. Or, at least, somewhat.
For when I try to shutdown the system, the computer hangs and just doesn't shutdown. It seemingly performs the processes required for it, the screen darkens, but the system does not power off. The first time I had to manually turn off the power, but last night I simply let it continue with the hope that it would shutdown eventually. It did... but only because my laptop battery ran out.
Before System Restore recommended, I tried that route already. No matter which restore point I used, the system told me that each restore was unsuccessful due to the possibility that my C drive was corrupt. I don't know if that's the case - certainly something is wrong - but I'm at a loss as to exactly what to do.
View 2 Replies
View Related
Jul 21, 2014
I have been using my asus laptop but recently started blue screening. When trying to shut it down the screen will go black, but the system lights remain on and it remains running, however irresponsive. It also began showing a blue screen with the warning "Driver power state failure".
View 3 Replies
View Related
Aug 26, 2012
I just upgraded to Windows 8 Enterprise x64 RTM yesterday, and have noticed an annoying problem that wasn't present under Windows 7 Enterprise x64 (which I was running previously). Specifically, the machine will not sleep, will not hibernate and will not shut down. When any of the three are attempted, they appear to succeed, but then the computer will immediately wake up again. In the case of a shutdown, the computer will actually power completely off and then start right back up immediately. I never used to sleep the machine in Windows 7, but I know the hibernation used to work and certainly shutting down did as well, as I shut the machine down every night.
In the event viewer, I have a Power-Troubleshooter event (ID 1) every time the machine wakes back up from an attempted sleep, hibernation or shutdown, but it always indicates that the wake source is "Unknown." I have tried unplugging every single Ethernet, USB and eSATA cable from the PC until nothing was left plugged in but the monitors, audio out and AC power -- just in case a device was sending a magic packet or some kind of wake-up signal. Even so, I still experienced the same immediate waking problems on shutdown, hibernate or sleep.
I was able to solve the inability to shut down by disabling Windows 8's "Fast Startup" option, which as I understand it uses a kind of hybrid hibernation. Hibernation is not working properly on my system. At least with "Fast Startup" disabled, I can actually shut the machine down. It's a pity though because I really liked Fast Startup's performance.
I've tried installing the authentic manufacturer drivers for my chipset (Intel 975 / ICH7 series), onboard LAN adapters and so forth in case the generic Microsoft drivers were at fault. The specific driver installation seemed to work fine but my problem remains.
Full system specs are in my profile, but it's kind of an old box I put together in late 2006. Core components of possible relevance to this issue are an Asus P5W DH Deluxe motherboard and Seasonic S12 600W power supply. The motherboard is running the very latest BIOS revision (3002). My Windows 8 installation was an in-place upgrade of my previous Windows 7 installation; everything seems to be working fine except for the weird power stuff.
Here's one other thing I should note, which concerns me somewhat as it is related by definition. In the P5W DH Deluxe's BIOS, there is an "ACPI 2.0 Support" option which defaults to "Disabled". Back when I built the machine I left it alone so it has been disabled this whole time. During my troubleshooting of these issues earlier tonight, I decided to try switching it to "Enabled" to see if it would have any effect. It has not fixed the issues at all, but it does make me wonder. Is there any way to tell whether Windows 8 has correctly identified the system as being ACPI 2.0 compliant? I think I remember in the old days WinXP used to have to be completely reinstalled when that switch was flipped.
Additionally, and much to my consternation, I can no longer use Wake On LAN. I've actually fixed the WoL issue. I had to go into Device Manager, find my network adapter and get the properties of it -- then, on the Advanced tab, find the property called "Wake From Shutdown" and set it to "On". This must have been either a new property in the Windows 8 driver for my network adapter, or was reset back to Off for some reason when I did the Win7 -> Windows 8 upgrade.
View 6 Replies
View Related
Dec 21, 2013
I have a Gigabyte GA-Z77X-UD5H and Windows 8 64 bit. The PC has been shutting down fine with an old monitor connected via VGA to a R9 280X GPU. I've now installed a new Viewsonic VP2770 monitor via DVI. When I shut down, the PC now restarts instead. Is there a BIOS setting or Windows 8 setting to ensure the PC shuts down correctly?
View 1 Replies
View Related
Mar 21, 2013
I'm running Windows 8 and sometimes my Graphics cards shutdown.... sometimes taking my pc along with it.
Updated drivers and is the same. Nvidia Geforce 8400GS.
Also have some unknown device that i cannot find what it is neither find driver for it.
View 5 Replies
View Related
Oct 13, 2013
As mentioned I have a USB network dongle that I use as a second network card. On my stationary pc it installed the driver automatically when plugged into the USB-port and it works perfectly. When I plug it into my laptop it also installs the driver automatically but.. the driver doesn't work and I have an exclamation mark saying the driver isn't working properly. I have tried reinstalling the driver countless times - no luck.
Both machines run the same version of Windows 8. What can I do?
EDIT: It's a Bluetooth device.
View 9 Replies
View Related
Feb 4, 2013
1. When I start windows and it tries to connect to the internet, it brings up a dialogue box to say "the password supplied is incorrect"
2. After opening settings I the password box is blank, even though I chose remember password. After inputting the correct password again, then try to connect it still brings up the same error msg.
3. Then I have to create a new PPPOP internet connection, with the exact same data AND chose remember my details -hey presto internet access until shutdown.
then repeat step 1...
View 2 Replies
View Related
Sep 15, 2014
ASUS X55C notebook I had windows 8.1 installed and my comp stop reading blue rays, so I called tech support. they told me to mail it in. they change my HDD cause a bad sector and installed normal windows 8 but changed my dvd/cd rom drive to matshita dvd ram. I use to have matshita dvd ram UJ8A0AS and it did play blue rays. now i'm calling back and they are trying to tell me that my model doesn't play BR's. that's the reason why I bought my computer. their call center verified all that. so can I add that driver to my device manager.
View 9 Replies
View Related
Sep 15, 2014
i need to change my driver for my dvd/cd-rom drives under Device Manager. where to download driver matshita dvd ram UJ8A0AS and how to install it
View 9 Replies
View Related
Jun 28, 2013
I tried all the different ways to install samsung usb driver but I couldn't. I installed samsung kies but didn't recognize the phone as well. i removed it and tried to download the update from windows and I got this message:
Now my Galaxy SII won't be recognized in windows 8. What should i do?
View 2 Replies
View Related
Sep 15, 2014
when i am inserting my usb game pad, every time it is showing a error.
then in device manager i uninstalled that device, then refresh it. but still its not working. still there is an unknown device in device manager.
View 2 Replies
View Related
Jun 22, 2014
I've just set up a clean system installation (Win 8.1 PRo x64). As a part of it I obviously installed my printer driver. The printer is Lexmark E260d and I use Lexmark Universal Driver downloaded directly from Lexmark's webpage.
My surprise is that after installation I have two such printers available at my system:
- "Lexmark E260" - which is the name I gave during installation,
- "Lexmark International Lexmark E260d" - which is another device appearing as a printer.
Both drivers / devices (?) print correctly yet I can see some differences in their functionality descriptions, when choosing Properties / Hardware. Lexmark E260 device has there "Print queues" only while Lexmark International... device has three types "Printers", "Print queues" and "Universal Serial Bus controllers". Another thing is when I double click on devices icons in "Devices and Printers" window - Lexmark E260 brings well-known list of documents actually being printed and Lexmark International... brings printer configuration dialog allowing to see printing documents, customize printer setting and so on.
Why I have somehow two different printers appearing on my system? Should I remove one of them and which? How can I avoid duplicating devices when installing drivers?
View 7 Replies
View Related
Oct 28, 2012
How to get their ATI/AMD TV tuner to work? I've tried to install Windows 7 and the Vista drivers, however I was unsuccessful.
View 2 Replies
View Related
Dec 3, 2013
I have dell inspiron laptop and 32 bit windows-8. My laptop has inbuilt webcam and it was working fine. But i installed a new external webcam. And both the webcams stopped working. I tried installing driver software from the driver-DVD of my laptop but it also didnt fix it.
The webcam cannot be used by other softwares like skype.
View 2 Replies
View Related
May 1, 2014
Last night two updates from MS, KB2919355 & KB2961887 were installed. Today the driver for my Epson R3000 printer was gone. Windows 8/8.1 seems to have a problem with this printer, even though Epson claims it is compatible and provides updated drivers. When I updated from Windows 8 to 8.1, it replaced my Epson drivers is a very basic MS generic driver. I had to manually install the Epson drivers again. That was a pain, and took several attempts. Is there a recommended way to install a driver that works?
View 1 Replies
View Related
Feb 27, 2013
I need to reinstall Windows 8 and it tells me that I need to load a driver before the install can begin. How to do that or where to find the driver for my computer (HP ENVY m6 1125-dx). I know for a fact that its my hard disk driver... SATA driver?
View 1 Replies
View Related
Feb 13, 2014
I installed Windows 8.1 a few days ago and now I am having problem installing and updating driver software for any hardware. I tried downloading drivers with Windows update which gives error code 8007000d while installing after successfull download while other software updates install fine. Using device manager, it gives a error that windows found the driver but had problem installing it.
And finally, I tried to install it directly using executable but couldn't install. For instance, I tried to install AMD Catalyst software and everything in it installed except the drivers, catalyst control center, hydravision and every application software installed but just not the driver software. I also had problem with bluetooth software. All drivers installed fine when I installed the windows 8.1 but after few days, this problem began and now I am not able to install any of it. P.S. I tried all the measures to solve error 8007000d I found at the internet.
View 2 Replies
View Related
Aug 7, 2014
I was installing the AMD beta driver and suddenly, black screen. It somehow restarted and I logged in, but I saw a black screen and after a few seconds, I was thrown back to the login screen. It was the same in safe mode! is there any way to uninstall the driver without a complete wipe? I don't want to start from the beginning again ...
View 1 Replies
View Related
Jan 5, 2014
I cannot disable driver signature enforcement I have using CMD, by bcdedit.exe , still not working (bcdedit /set loadoptions DISABLE_INTEGRITY_CHECKS & bcdedit /set testsigning on ) even after running CMD as Administrator
Also, i have disable driver signature enforcement by setting ( general-advanced setting- etc) Still no effect
View 2 Replies
View Related
Mar 11, 2014
this morning I was playing FIFA 13, charger not plugged in and I noticed there is a performance difference between plugged in and not plugged in. The game was laggy a bit. Then suddenly, my game crash with a black screen first then a pop up yellow exclamation mark warning appears, something about :
Display driver 331.65 has stopped responding and has successfully recovered.
I restart my laptop and shut it down after some time. This afternoon I turn it on back and play FIFA 13 again but this time with the cable plugged in. The game was smooth now and the message earlier didn't appear. So this means I have to plugged in every time I want to play? And why there is a performance difference when plugged in and not plugged in?
View 9 Replies
View Related
Aug 13, 2014
I was updating my drivers, and had wanted to update my Synaptics driver. I had removed the older version of Synaptics driver (because I was required to) and wanted to restart. My computer restarts, and I try to install the latest version of the Synaptics driver, it doesn't work. It says "install failed." I have tried multiple times.
View 5 Replies
View Related
Sep 15, 2014
The Hardware detected is not supported by this IDT software package. The install Will Be aborted .
OS : Win 8.1 64 bit
View 4 Replies
View Related
Sep 15, 2014
when ever i play arma 3 it crashes and brings up a driver error message i fixed this problem before. My friend updated the driver to the latest version but i had to do a computer reset a little bit ago and im not good with computers and dont know which one to get. My graphics card is a intel HD graphics and i have windows 8
View 1 Replies
View Related
Mar 29, 2014
Installed 32-bit Win 8.1 onto a Dell D610 (Pentium M 1.86GHz 2GB RAM) and it really works very well. Except for one nagging problem - the 4 left/right click buttons do not work! I have tried several drivers and all give full touch pad functionality (scroll and tap/click) and the keyboard stick works - but both sets of left and right buttons refuse to do anything. All worked with Win 7, so I assume it is a driver problem. I currently have a Logitech USB wireless mouse attached which works fine, but I would like to get the buttons on the laptop functioning.
View 3 Replies
View Related
Mar 6, 2014
I downgraded this laptop from 8 to 7. The only driver I'm having problems is the USB controller.
I went to the HP we site and selected the Windows 7 driver but I get an error:
(This computer does not meet the minimum requirements for installing the software.)
I have downgraded many machines now and this is my 2nd one that I have had issues. My last computer I had to grab drivers from a computer that was close to the same model.
I tried the programs DriverMax and Slimdrives and they found an USB controller driver that seemed to work but when I plug in the flash drive it does nothing.
View 3 Replies
View Related
Aug 28, 2014
I downloaded windows 8.1 and installed it. Then I discovered there were no windows 8 drivers for my computer model in the manufacturer website. I use a Notebook "Compaq Presario CQ57", How can I find drivers that will work for it? (most especially the WiFi driver from previous installation of windows 7 did not work for it). I have checked Driverpack Solution website, my PC was not listed among their list of PCs.
View 9 Replies
View Related
Jun 21, 2014
I would like to delete obsolete drivers from the "update device driver" screen in the device manager. More specifically form the "I want to choose from a list of device drivers on my computer" screen. How to do this?
Attached a printscreen :
View 1 Replies
View Related
