Network / Sharing :: Every Time Shutdown Windows 8 Need To Reinstall Broadband
Feb 4, 2013
1. When I start windows and it tries to connect to the internet, it brings up a dialogue box to say "the password supplied is incorrect"
2. After opening settings I the password box is blank, even though I chose remember password. After inputting the correct password again, then try to connect it still brings up the same error msg.
3. Then I have to create a new PPPOP internet connection, with the exact same data AND chose remember my details -hey presto internet access until shutdown.
then repeat step 1...
View 2 Replies
ADVERTISEMENT
Sep 28, 2013
I have 2 PC's. Both are now running Windows 8. The main PC was running Windows 7 and I there mapped a network drive (z to the Windows 8 PC. It worked very nice. The second PC was also shown in "networks" in "my Computer" right after boot of Main PC. So network for sharing is set up properly on second PC.
After installing Windows 8 on main PC, it is still working, but the time spend waiting for the network drive is waaaaay longer now. The name of second PC "Photo-PC", is shown right after boot, but when I first click on the name, and get this error:
Networkpath not found. Errorcode 0x80070035
If I then wait about 20-30 seconds and then click again on "Photo-PC" then I have access to all shared drives, included my mapped network drive Z:
How can I eliminate this 20-30 seconds delay after boot?
I have given up setting up a homegroup, never had it to work, but "oldfashioned" network drives used to work
View 6 Replies
View Related
Jan 3, 2014
I started to notice a change with the clock every now and then. I finally concluded that the clock does not change during sleep, restart, or shutdown.
My computer goes to sleep often, and when it wakes up from sleep, the time is the same as when it was prior to sleeping, not synchronizing to the correct time after waking up.
I've done some research and I fell onto the official Windows thread where they explained the use of third-party-utility will cause this problem.
The big problem here is that I don't have the single clue which ones. I tried uninstalling some, not sure if I left any utilities out. The utilities I've used are the general ones for visual styles and themes.
I'm running Windows 8.1.
View 6 Replies
View Related
May 2, 2014
I recently purchased alienware m18x r2 with following specs
I7 3630m
Gtx 680m sli
12gb ram
750gb wd
120 (windows installed)
& 256gb sdd
Now for the problem when I receive the laptop it was preinstalled with window 8 and on the first boot it took around 5 to 6 mins to boot to desktop..I reinstalled the windows considering it to be the bloatware fault..
The problem gets solved but after i download alienware osd drivers , alienware command center and nvidia drivers the delay is back ..
It starts with a bsod (your pc ran into problem)error window minidump memory.dmp.etc and after that windows boot restart and shutdown after almost 5 to 10 mins..
In the duration of delay there is no hdd activity and after 3 to 5 minutes when the hdd gets actives it boots to desktop in 5 secs..
View 1 Replies
View Related
Nov 4, 2012
I finally figured out my Wake on LAN issues for my HTPC with my recent upgrade to widows 8.
Now my issue is how do I disable the 30 sec wait time for approval by currently logged in user when I try to establish a Remote Desktop connection?
I have tried to change the settings in gpedit allowing admin access with out users permission but it doesn't seem to work in widows 8.
View 9 Replies
View Related
Mar 2, 2014
So, I have been running 8.1 pro for some time now. During the last 2 or 3 weeks, I started having a login issue.
It loads bios, loads windows fine. I get to the login screen, and it seems to take forever to recognize internet connection. Gives me the little "!" over the internet. I put in password. Takes about a minute to finally log in.
I have gone to start up in task manager and disabled everything. This does nothing. I have changed from a live to a local account. Nothing. I have not installed anything recently other then video drivers. Internet seems to work fine while logged in.
Have all the most recent mobo drivers.......
Hardware
Asrock z77 Fatality Pro
Core i7 3770k
Kingston X SSD for OS drive.
Anything else in my hardware does not really seem relevant.....
I am attempting o OC my cpu and gpu and have to reboot a lot to dial it in.
Here is a really bad pic of what I am seeing on the login screen. It takes up to 3 minutes to establish connection when it used to be almost instantaneous.
Here are some other things I have done.
-Updated router firm ware: no change
-Tried static ip: nodda
-Disabled all virus software: nothing.
-Differnet cable. nothing
still having the issue......
View 9 Replies
View Related
May 3, 2013
I have been having problems with my wifi network, it cuts in and out all the time. I have to constantly use the troubleshooter to fix it. Here is the screen shot attachment I took for you.
View 9 Replies
View Related
Jan 27, 2014
Since upgrading my XPS 8700 from Windows 8.1 to 8.1 Pro (via the Win 8.1 Pro Pack upgrade) every time I shut down the system - no matter if I use the "charms" power button or the shut down option from the half-baked "start button" - my computer restarts. I've checked Microsoft's Windows user forums and followed one suggestion to turn off fast startup, but this did not solve the problem. My computer would occasionally restart rather than shut down when running Windows 8 (the original OS) and 8.1, but now it happens every time I shut down.
ODD ASIDE: My two year old Inspiron 620, which supposedly wasn't upgradeable to Windows 8 from Win 7 shuts down running Win 8.1 Pro with no problem whatsoever.
View 13 Replies
View Related
Sep 8, 2013
I've set several folders and drives to be shared on the network with read/write permission. The problem is that each time I start Windows, I can only Access the shared items across the network with Read permission, instead of the read/write I originally set, so I have again to right-click > share with > read/write.
View 2 Replies
View Related
Dec 14, 2013
Currently I have a home network and need to do some rewiring but wanted to know if a software solution exists.
Right now I have the following setup
Code: +------+ +--------------+ +--------------------+ |Modem|----------->|Wi-Fi Router |+-------->|Desktop Computer| +------+ +--------------+ +--------------------+ + + | | | | +------+ | +-------------->|Server| v +------+ +----------------+ |Laptop Computer| (wifi atapter is OFF) +----------------+ + | v +---------------+ |Network Storage| (security storage computer NAS200) +---------------+
My laptop computer is the only computer has 2 NIC and thus I have set it up so that no other computers on my network can reach the network storage. I will be changing how things are wired together so that the network storage will now be connected through the Wi-Fi router, however I want to maintain the security of not allowing other computers on my network from reaching the network storage.
Is there a way that I can do this? Can I put the network storage computer on a different workgroup from the other computers? Can I have my laptop see 2 work groups so that it can see both the network storage and my home (unrestricted) LAN?
I am running windows 8 (not 8.1) x64 on all my computers. My router is a Linsys E4200.
View 3 Replies
View Related
Sep 10, 2014
So I have this old problem with windows 8.1. I've google it, and i found that in windows 8.1 they introduced internet explorer 11, and that one does not have anymore the option to auto-connect your broadband internet when the win8.1 is loaded. Like in windows 8.0.
View 3 Replies
View Related
Oct 8, 2013
which is about the network drivers, I am using Intel desktop board dh61ww which has its on board LAN adapter named (Intel gigabit LAN) which uses Intel gigabit network controller driver, When i bought this computer I had no issues used it about 8 months with out any problems, but now its been 10 months of total. Before 6 days some person used my computer and after that i started facing this problem that is after every reboot i have to reinstall my drivers or restore the windows to a point that i saved. I have done fresh windows on this PC(three times) also with deleting and creating new partitions but still it keeps coming up. after shutdown when I login to my windows the task bar haves a red cross on network connections icon and in device manager there's an exclamation mark on network drivers. so i have to waste my time for restoring windows or reinstalling my network drivers.
View 1 Replies
View Related
May 5, 2013
I've decided to go ahead and reinstall w8pro given my extensive messing around with it has finally caused some quirky, unexpected results - it's a relatively new installation, so it shouldn't be too much of a hassle, didn't get a chance to install a lot of third party programs and such. The thing is, I did purchase and install the Windows 8 media center pack - how do i go about getting this back? do i have to contact ms? I'm fairly certain that i don't have an activation number for the pack, if i recall i just paid for it online and then was allowed to download it and install it.
Also, i thought i would go ahead and do a clean install all over again as opposed to a reset or refresh given i want to make certain that i'm starting from scratch again... or do you think a reset or refresh might be the better option (i'm not concerned about keeping any personal settings or files intact).
View 9 Replies
View Related
Aug 2, 2013
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies
View Related
Jan 14, 2013
I have noticed the past 24 hours that my network utilization on process ntoskrnl.exe is up to 93-99% all the time. what is this process and should I be worried? I have port 8080 open from the outside for sab but that's it.
View 7 Replies
View Related
Aug 30, 2013
I am using windows 8 and from time to time the whole laptop freezes with only short moments where you can move the mouse until it freezes again.
And today I was using word and the program wouldn't let me work in it, you could see the mouse movement at the bottom of the screen only. I had to shut it down using task manager for it to work again.
View 1 Replies
View Related
Aug 12, 2013
I am trying to share a specific folder on my Windows 8 computer with my Windows 7 computer. They are both on the same network connected to the same router. The Windows 8 computer is connected through ethernet, while the Windows 7 computer is connected wirelessly.
Here are my settings on my Windows 8 Computer:
This is the error I get on my Windows 7 computer:
What's up with this? On a related note, is it possible to share this folder with a specific PC, rather than "Everyone" on the network?
View 5 Replies
View Related
Apr 23, 2013
I am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
View 9 Replies
View Related
Aug 20, 2014
I've been trying to set up an old Savin 9033 printer through the company's router, but I couldn't find the network it's set up on from any other computer.
So I pull up Network & Sharing, see that Network Discovery is turned off.
I check it, go to click on "Save Changes" and nothing happens. I click it a few times and it kicks me back to the previous page, nothing saved. No password prompt or anything.
I double checked that all the appropriate services are running (DNS Client, SSDP Discovery, UPnP Device Host, Function Discoveryr Resource Publication, etc.) and made sure Network Discovery was allowed through Windows Firewall.
View 2 Replies
View Related
Feb 27, 2013
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
View 5 Replies
View Related
Oct 23, 2013
After making clean install of Windows 8.1 (before I had Windows 8) then my laptop started to hang from time to time.
Selecting tiles in Start screen with keyboard is normal as it used to be , mouse moves normally but HDD light is not on or blinking. Clicking with mouse does do nothing.
When I click fast many times then it finally opens App from Start screen on a program in Desktop mode but everything is slow for 3-4 min. Then it automatically works as it should be, like nothing would be wrong.
View 2 Replies
View Related
Jul 24, 2014
I am trying to get file sharing to work with my win 8 machine and my OS X Server. The computers are on the same network with the same workgroup but I can't seem to connect. I was able to connect with the wife's win 7 home machine until I upgraded it to win 7 Ultimate now it wont connect either.
View 1 Replies
View Related
Jan 3, 2014
Okay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
View 3 Replies
View Related
Jun 8, 2013
I would like to make a folder share from a tablet with windows 8 with password protected to a laptop of windows 7 and another of vista. I have followed the tutorial of File Sharing - "Share with" & "Stop Sharing" in Windows 8. My PCs have been set in the same workgroup and same user account, network discovery and file and printer sharing turned on. At the first time, it is OK for windows 7. However after some changes of account (delete and create them on both windows 8 and windows 7), it doesn't work anymore with the error from windows 7 "Login failure: user has not been granted the requested logon type at this computer" whenever password protected turned on in windows 8 and only OK when password turned off.
View 1 Replies
View Related
Aug 10, 2013
I just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies
View Related
Dec 15, 2013
I re-installed Windows 8 yesterday evening (thought it would be quicker than to cleanup and fix my old install) and then directly upgraded it to Windows 8.1. The problem I am experiencing is quite weird: The Operating System doesn't detect the network cable.
With that being said, do not jump straight to the "Did you turn it on and off again" questions. Here is what I have done so far:
Hardware-Side: Cross-check the cable with another computer --> Working fineCross-check the wall plug with another computer --> Working fineTest the connection with the BIOS's connection diagnostic utility --> Link detected
Software-Side: Checking if Windows was up to date --> Nothing to updateUpdating the motherboard's BIOS --> Not betterUpdating the LAN's drivers with the ones I found on the manufacturer's website --> Not better
I am wondering what is wrong with my installation. It was working A1 a few days ago, except for the issues I re-installed the operating system for.
View 4 Replies
View Related
Aug 19, 2014
In my network 4 Desktop running windows XP all are connected LAN cable and my modem is tplink and 1 laptop running windows 8.1 pro accessing network through wireless in my laptop network place all the pcs are visible but I am not able to ping them and when I click I am getting message that Network path not found Error code 0x80070035
View 2 Replies
View Related
May 6, 2014
My 8.1 laptop shows multiple network connections to my Samsung Smart TV --- One as "media connections" and 3 as "other connections". Both devices are on a simple wireless network using Linksys WRT54GS.
Under the "Network" page, most of the "Properties" of the TV connections are the same except for "Serial Number" and "Unique Identifier". Did I do something wrong when setting things up? Are these extra connections harmful? Should I delete some? How?
View 1 Replies
View Related
Jun 9, 2014
I purchased a new Windows 8, Inspiron 15 7000 series - 7537 last December. I had been using a router at a hotel for the time, and it worked correctly. When I arrived home, I had a Belkin router, and i experienced network issues in that i could not connect to the wifi. I could connect with Ethernet cable. The problem was fixed through customer support eventually, but I now have a new Comcast router, and i'm experiencing what appears to be the same or a similar issue. I can access the internet fine by wire. With wifi, it says i have access to the internet over the internet icon in the bottom right, but i cannot access webpages. I can use skype, and communicate through it.
Here is the result from the ipconfig /all :
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
[Code] .....
I really need the wifi on this router working for this laptop. Let me note that it works on other laptops, so it should be an issue with hardware or settings on this laptop.
View 8 Replies
View Related
Mar 19, 2014
With the following problem regarding media streaming in windows 8. Up until recently I could stream video films from my HP laptop & HP desktop onto the TV via DNLA.
After following several posts on various sites it seems that when I try to start the windows media player network in the services I get the error message "windows could not start the windows media player network sharing service on the local computer.
Error 1068. The dependency group failed to start."
In the dependencies tab in the lower box of the two "the following system components depend on this service"
The box is greyed out and the words no dependencies is displayed.
View 3 Replies
View Related
May 10, 2014
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
View 6 Replies
View Related
