I cannot disable driver signature enforcement I have using CMD, by bcdedit.exe , still not working (bcdedit /set loadoptions DISABLE_INTEGRITY_CHECKS & bcdedit /set testsigning on ) even after running CMD as Administrator
Also, i have disable driver signature enforcement by setting ( general-advanced setting- etc) Still no effect
Need install unsigned drivers permanent on Windows 8, I tested
shutdown -o -r -t 0
Options advance and restart option 7 to disable drivers unsigned
The problem is when i restart my pc. I lost drivers. I need to restart again to use this driver.
How do I disable driver signature enforcement in windows 8.1 permanently ? I dont want to use that advance restart option all the time... is it possible?
View 2 Replies View Relatedi try to use "Disable driver signature enforcement" in Windows 8 Setting. But, it make my USB modem not work.
How i can rollback my setting?
I have an Xbox Controller S running on XBCD drivers for my Windows 8 computer. When I used these drivers on my Windows 7 laptop, I used DSEO to enable test mode, and it worked perfectly. Using the same method sends Windows 8 into a BSOD, so that's out of the question. The other solution is to reboot from the Settings menu and manually disable it at EVERY STARTUP. So, is there any other ways to disable DSE without rebooting every time I want to use the controller?
My computer is a 5-month old ASUS M11BB, 3.7GHz AMD A4, with Windows 8 64-bit installed.
I am trying to increase the USB sampling rate of my USB mouse.
This is how I used to do it in Windows 7:
Run DSEO and enable test mode.
Reboot.
Right click HIDUSBF.INF and select Install.
Configure the driver and set the polling rate to 500 hz.
Run DSEO and sign these two files: C:WindowsSystem32DriversHIDUSBF.sys and C:WindowsSysWOW64DriversHIDUSBF.sys
Reboot.
And My mouse runs at 500 hz!
Apparently, enabling DSEO in test mode does not work anymore, so here's what I've done so far in Windows 8:
In elevated cmd, I ran this command: bcdedit -set TESTSIGNING ON
Reboot.
Right click HIDUSBF.INF and select Install.
Configure the driver and set the polling rate to 500 hz.
Run DSEO and sign these two files: C:WindowsSystem32DriversHIDUSBF.sys and C:WindowsSysWOW64DriversHIDUSBF.sys
Reboot.
My mouse is still running at 125 Hz. This is a nightmare. Then, I tried:
In elevated cmd, I ran this command: bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
Reboot.
Mouse is still at 125 Hz.
Do I need to convert the INF file to a CAT file?
I've had to partially reinstal my Windows 8. This means I lost almost all my software and drivers. Now I have the headache again. On previous OS instance I had somehow disabled strict drivers signature (WHQL) control, so I was able to install even unsigned drivers like betas. Now on new OS, the annoying messages popup again and I can't for god remind where I had it disabled.
What I have:
- uninstalled defender
- disabled UAC by sliding the slider down (however UAC is still reported as active in Security Center - a guide to totally get rid of UAC would come useful )
- This hack doesnot remove the problem.
I know for sure this control can be disabled like I was able to install almost everything previously.
Tried also this hack and it doensot work:
Disable Driver Signing in Windows 7
I wanted to install fastboot driver for my xperia SP, so i disabled driver enforcement at start up settings and from then on my keyboard on the laptop doesn't work. I am using windows 8.1
View 3 Replies View RelatedHow to install inf/drivers which have no digital signature in Windows 8 ? I had tried to install kqemu-1.4.0pre1 and returned "Third part inf does not contain digital signature information". When I tried to run service which returned
C:Windowssystem32>net start kqemu
System error 1275 has occurred.
This driver has been blocked from loading...
Any way to stop the 8.1 upgrader from automatically installing (graphics) drivers as it sets up? I have an Acer AS4820TG with switchable Intel HD and Mobility Radeon HD 5650 graphics, and I'm 99% sure that drivers for one of these are causing a problem with installing 8.1 Pro. The screen turns black after the second restart, when Windows is "Getting devices ready". After this point it stays black.. no input of any sort affects it. I tried waiting it out for a while, and eventually I just did a hard shut down, at which point Windows reverted to 8. I'm hoping that if I can get it to install without the drivers, I can manually install them from the desktop.
View 4 Replies View RelatedAnyways I've been having trouble since I got this laptop and basically my f1, f2 keys are like for screen brightness etc however if I press the FN key then it works how I want it to. How I can disable the FN function key to work opposite? also how do I set hot keys?
View 2 Replies View RelatedThey are so freaking. I use a ELAN Mousepad.
View 3 Replies View RelatedI've seen tutorials for disabling the Camera on the Lock Screen, but how do I disable the camera completely?
View 4 Replies View RelatedA couple days ago, somehow, I turned on 'scanning your device' and now I get a black screen every time I plug my phone into the USB port to charge it. how to disable this 'feature'. It's really annoying because the connection is a bit worn, and it keeps connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...connecting and disconnecting...
I don't want anything to happen when I plug the phone into the USB port.
ASUS X55C notebook I had windows 8.1 installed and my comp stop reading blue rays, so I called tech support. they told me to mail it in. they change my HDD cause a bad sector and installed normal windows 8 but changed my dvd/cd rom drive to matshita dvd ram. I use to have matshita dvd ram UJ8A0AS and it did play blue rays. now i'm calling back and they are trying to tell me that my model doesn't play BR's. that's the reason why I bought my computer. their call center verified all that. so can I add that driver to my device manager.
View 9 Replies View Relatedi need to change my driver for my dvd/cd-rom drives under Device Manager. where to download driver matshita dvd ram UJ8A0AS and how to install it
View 9 Replies View RelatedI have an acer laptop that came preloaded with windows 8 64bit. I am unable to turn on test mode. It says "Setting is protected by secure boot" or something similar.
An option in the boot settings (accessed by holding shift key while restarting) is there to turn off driver signing restrictions but it isn't working for me at all.
I did it on my desktop with windows 8.1 (not preloaded) in order to set my mouse USB port to a higher frequency with a non-digitally signed driver.
So, I've just bought a new laptop for university work and it came with Windows 8 pre-installed.
First thing I did when I booted the laptop up was install Microsoft Word and Norton Security, all fine so far!
And then it comes to downloading iTunes, latest Adobe Flashplayer/PDF reader etc and everytime it will get close to finishing. Around 98% or so, before stopping and saying 'The file download was interrupted'. So I press resume download and it comes up with another error message of 'The signature is invalid or corrupt'. I literally can't download a thing?
Also, I can't play youtube videos either. All I get is the 'buffering' circle, a black screen and a greyed out play button!
I tried all the different ways to install samsung usb driver but I couldn't. I installed samsung kies but didn't recognize the phone as well. i removed it and tried to download the update from windows and I got this message:
Now my Galaxy SII won't be recognized in windows 8. What should i do?
when i am inserting my usb game pad, every time it is showing a error.
then in device manager i uninstalled that device, then refresh it. but still its not working. still there is an unknown device in device manager.
I've just set up a clean system installation (Win 8.1 PRo x64). As a part of it I obviously installed my printer driver. The printer is Lexmark E260d and I use Lexmark Universal Driver downloaded directly from Lexmark's webpage.
My surprise is that after installation I have two such printers available at my system:
- "Lexmark E260" - which is the name I gave during installation,
- "Lexmark International Lexmark E260d" - which is another device appearing as a printer.
Both drivers / devices (?) print correctly yet I can see some differences in their functionality descriptions, when choosing Properties / Hardware. Lexmark E260 device has there "Print queues" only while Lexmark International... device has three types "Printers", "Print queues" and "Universal Serial Bus controllers". Another thing is when I double click on devices icons in "Devices and Printers" window - Lexmark E260 brings well-known list of documents actually being printed and Lexmark International... brings printer configuration dialog allowing to see printing documents, customize printer setting and so on.
Why I have somehow two different printers appearing on my system? Should I remove one of them and which? How can I avoid duplicating devices when installing drivers?
How to get their ATI/AMD TV tuner to work? I've tried to install Windows 7 and the Vista drivers, however I was unsuccessful.
View 2 Replies View RelatedI have dell inspiron laptop and 32 bit windows-8. My laptop has inbuilt webcam and it was working fine. But i installed a new external webcam. And both the webcams stopped working. I tried installing driver software from the driver-DVD of my laptop but it also didnt fix it.
The webcam cannot be used by other softwares like skype.
I just recently purchased a windows machine and I would like to disable the right click area of the trackpad. Since you can use two fingers to right click, I don't see any reason to have that area designated for that purpose.
View 9 Replies View RelatedAny way to auto disable the touch pad when an usb mouse connected to the machine? and auto enable it again once the usb mouse is unplugged?
View 1 Replies View RelatedLast night two updates from MS, KB2919355 & KB2961887 were installed. Today the driver for my Epson R3000 printer was gone. Windows 8/8.1 seems to have a problem with this printer, even though Epson claims it is compatible and provides updated drivers. When I updated from Windows 8 to 8.1, it replaced my Epson drivers is a very basic MS generic driver. I had to manually install the Epson drivers again. That was a pain, and took several attempts. Is there a recommended way to install a driver that works?
View 1 Replies View RelatedI need to reinstall Windows 8 and it tells me that I need to load a driver before the install can begin. How to do that or where to find the driver for my computer (HP ENVY m6 1125-dx). I know for a fact that its my hard disk driver... SATA driver?
View 1 Replies View RelatedI installed Windows 8.1 a few days ago and now I am having problem installing and updating driver software for any hardware. I tried downloading drivers with Windows update which gives error code 8007000d while installing after successfull download while other software updates install fine. Using device manager, it gives a error that windows found the driver but had problem installing it.
And finally, I tried to install it directly using executable but couldn't install. For instance, I tried to install AMD Catalyst software and everything in it installed except the drivers, catalyst control center, hydravision and every application software installed but just not the driver software. I also had problem with bluetooth software. All drivers installed fine when I installed the windows 8.1 but after few days, this problem began and now I am not able to install any of it. P.S. I tried all the measures to solve error 8007000d I found at the internet.
I was installing the AMD beta driver and suddenly, black screen. It somehow restarted and I logged in, but I saw a black screen and after a few seconds, I was thrown back to the login screen. It was the same in safe mode! is there any way to uninstall the driver without a complete wipe? I don't want to start from the beginning again ...
View 1 Replies View Relatedthis morning I was playing FIFA 13, charger not plugged in and I noticed there is a performance difference between plugged in and not plugged in. The game was laggy a bit. Then suddenly, my game crash with a black screen first then a pop up yellow exclamation mark warning appears, something about :
Display driver 331.65 has stopped responding and has successfully recovered.
I restart my laptop and shut it down after some time. This afternoon I turn it on back and play FIFA 13 again but this time with the cable plugged in. The game was smooth now and the message earlier didn't appear. So this means I have to plugged in every time I want to play? And why there is a performance difference when plugged in and not plugged in?
I was updating my drivers, and had wanted to update my Synaptics driver. I had removed the older version of Synaptics driver (because I was required to) and wanted to restart. My computer restarts, and I try to install the latest version of the Synaptics driver, it doesn't work. It says "install failed." I have tried multiple times.
View 5 Replies View Related
