How do I disable driver signature enforcement in windows 8.1 permanently ? I dont want to use that advance restart option all the time... is it possible?
View 2 RepliesNeed install unsigned drivers permanent on Windows 8, I tested
shutdown -o -r -t 0
Options advance and restart option 7 to disable drivers unsigned
The problem is when i restart my pc. I lost drivers. I need to restart again to use this driver.
I have an Xbox Controller S running on XBCD drivers for my Windows 8 computer. When I used these drivers on my Windows 7 laptop, I used DSEO to enable test mode, and it worked perfectly. Using the same method sends Windows 8 into a BSOD, so that's out of the question. The other solution is to reboot from the Settings menu and manually disable it at EVERY STARTUP. So, is there any other ways to disable DSE without rebooting every time I want to use the controller?
My computer is a 5-month old ASUS M11BB, 3.7GHz AMD A4, with Windows 8 64-bit installed.
I cannot disable driver signature enforcement I have using CMD, by bcdedit.exe , still not working (bcdedit /set loadoptions DISABLE_INTEGRITY_CHECKS & bcdedit /set testsigning on ) even after running CMD as Administrator
Also, i have disable driver signature enforcement by setting ( general-advanced setting- etc) Still no effect
i try to use "Disable driver signature enforcement" in Windows 8 Setting. But, it make my USB modem not work.
How i can rollback my setting?
I am trying to increase the USB sampling rate of my USB mouse.
This is how I used to do it in Windows 7:
Run DSEO and enable test mode.
Reboot.
Right click HIDUSBF.INF and select Install.
Configure the driver and set the polling rate to 500 hz.
Run DSEO and sign these two files: C:WindowsSystem32DriversHIDUSBF.sys and C:WindowsSysWOW64DriversHIDUSBF.sys
Reboot.
And My mouse runs at 500 hz!
Apparently, enabling DSEO in test mode does not work anymore, so here's what I've done so far in Windows 8:
In elevated cmd, I ran this command: bcdedit -set TESTSIGNING ON
Reboot.
Right click HIDUSBF.INF and select Install.
Configure the driver and set the polling rate to 500 hz.
Run DSEO and sign these two files: C:WindowsSystem32DriversHIDUSBF.sys and C:WindowsSysWOW64DriversHIDUSBF.sys
Reboot.
My mouse is still running at 125 Hz. This is a nightmare. Then, I tried:
In elevated cmd, I ran this command: bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
Reboot.
Mouse is still at 125 Hz.
Do I need to convert the INF file to a CAT file?
I've had to partially reinstal my Windows 8. This means I lost almost all my software and drivers. Now I have the headache again. On previous OS instance I had somehow disabled strict drivers signature (WHQL) control, so I was able to install even unsigned drivers like betas. Now on new OS, the annoying messages popup again and I can't for god remind where I had it disabled.
What I have:
- uninstalled defender
- disabled UAC by sliding the slider down (however UAC is still reported as active in Security Center - a guide to totally get rid of UAC would come useful )
- This hack doesnot remove the problem.
I know for sure this control can be disabled like I was able to install almost everything previously.
Tried also this hack and it doensot work:
Disable Driver Signing in Windows 7
I wanted to install fastboot driver for my xperia SP, so i disabled driver enforcement at start up settings and from then on my keyboard on the laptop doesn't work. I am using windows 8.1
View 3 Replies View RelatedWindows 8.1 [update] 64bit
HP G62293sa
Intel i5 2.5GHz
6GB Ram
I really need a solution to permanently disable auto maintenance in 8.1.
I've tried everything in task scheduler. I've disabled 'Idle Maintenance' & 'Regular Maintenance' ... and I was finally able to find a way to disable 'Maintenance Configurator'. However, the 'custom triggers' for the latter are impossible to disable as is the 'daily trigger' which keeps re-enabling itself.
The auto maintenance is a law unto itself. It doesn't run when the system is idle. It runs whenever it feels like it ... which is usually when I'm browsing, streaming etc. I've put up with this for long enough. There has to be a permanent solution.
How do you permanently disable the clickpad on an HP ENVY laptop using Windows 8? Restarting re-enables the clickpad.
View 4 Replies View RelatedI have protected my pc at work and locked it down so that no employee can access windows 8. Only problem is that yesterday I accidently pressed reset button midway whilst windows was loading and it brought up the safe mode screen. Since I have a full backup image of my drive, I can always reload my preferred setup whenever I want via usb install, so I don't want windows to run into safe mode at all - EVEN IF IT MEANS I COULD LOSE DATA!
My question is How can I disable this safemode feature from starting at all if windows crashes?
Everytime I accidentally press FN+Left mouse, I enable tap-to-click (which I want to have off). I can disable the function with the same combination, but I'd like to find out a way to permantently disable tap-to-click.
I have Win 8 Pro now, but Vista and Win 7 behaved the same way, so I reckon it should be a Windows thing...
Task scheduler on my computer. I disabled it, then like a few hours later it enables itself back up. How to disable task scheduler for good????
View 18 Replies View RelatedAny way to stop the 8.1 upgrader from automatically installing (graphics) drivers as it sets up? I have an Acer AS4820TG with switchable Intel HD and Mobility Radeon HD 5650 graphics, and I'm 99% sure that drivers for one of these are causing a problem with installing 8.1 Pro. The screen turns black after the second restart, when Windows is "Getting devices ready". After this point it stays black.. no input of any sort affects it. I tried waiting it out for a while, and eventually I just did a hard shut down, at which point Windows reverted to 8. I'm hoping that if I can get it to install without the drivers, I can manually install them from the desktop.
View 4 Replies View RelatedHow to install inf/drivers which have no digital signature in Windows 8 ? I had tried to install kqemu-1.4.0pre1 and returned "Third part inf does not contain digital signature information". When I tried to run service which returned
C:Windowssystem32>net start kqemu
System error 1275 has occurred.
This driver has been blocked from loading...
I want to delete files permanently on windows8 which can never be recovered.
View 7 Replies View RelatedFor Windows Vista/7, there was a very useful Tool called "Prio", with which one could set and save the priority of a process directly inside the Task Manager. But now in Windows 8, that Tool isn't working anymore, and there seem to be no alternatives either how it's possible to set the priority of a process permanently in Windows 8? Doesn't matter if by a Tool or by Coding, but is it possible somehow?
View 5 Replies View RelatedSo, I've just bought a new laptop for university work and it came with Windows 8 pre-installed.
First thing I did when I booted the laptop up was install Microsoft Word and Norton Security, all fine so far!
And then it comes to downloading iTunes, latest Adobe Flashplayer/PDF reader etc and everytime it will get close to finishing. Around 98% or so, before stopping and saying 'The file download was interrupted'. So I press resume download and it comes up with another error message of 'The signature is invalid or corrupt'. I literally can't download a thing?
Also, I can't play youtube videos either. All I get is the 'buffering' circle, a black screen and a greyed out play button!
OK I have Windows 8, and am using Windows Live Mail which I down loaded from day one.
Question:: How do I put an avatar and signature on bottom of my e-mail so it is always there automatically?
I have never done this before, but noticed some people do have it.
I have just brought over my Gmail account into my Outlook.com account. I can now send or receive GMail using the Outlook.com web interface. Is there a way I can create seperate Signatures for each email account (@outlook.com and @gmail.com)?
View 2 Replies View RelatedI am wondering if it is possible to permanently display "Product Version" for every folder I visit.
View 2 Replies View RelatedSince i did a fresh reinstall of Win 8 64 i have never been able to change the folder view options. Example; I am in a windows explorer window, everything is displayed as a large icon (yuk), i right click go to view and change to details. I then click 'view' on the toolbar and click options, I then navigate to the 'View' tab whereby my intention is to apply the 'detailed' view to all explorer windows in future yet both fields are greyed out (the 'Apply to Folders' and 'Rest Folders').
It has never been usable since this fresh install (ie on previous versions of win 8 installs i recall it working, but not this one, ie its not a recent problem, has always been like this).
I just deleted a very important file from the recycle bin. It's and exe file with a size of 2.8 GB.
View 9 Replies View RelatedIn Windows 8.1 Pro Update 1 64-bit I am not given the option to move files to the Recycle Bin. Instead, when I delete a file I am asked "Are you sure you want to permanently delete this file?"In the Recycle Bin properties for each hard drive partition I have not selected "Don't move files to the Recycle Bin" and I have check-marked "Display delete confirmation dialog."
I can't remember precisely when this started to happen, but I did install Update 1 recently. I don't know if that matters.
I installed Windows 8 Pro on a new PC. I ran into a problem where Windows automatically started at the wrong monitor timing. I temporarily used a TV to get to an advanced startup screen that had a check box for low-resolution. That allowed it to work with my display. I now have a video card that correctly supports my display. The problem is, Windows 8 always boots in low resolution and I have to manually change it after each boot.
The problem is that I don't recall what gave me the screen with the menu. It is not the blue screen with press F1 - F9. This was a standard dialog box with check boxes and a note on the side saying any changes would be permanent. But any method that allows it to permanently boot to a normal screen.
I have been looking all over i even tried phone activation with 100 different product keys and every time i cal that number 855 469 ..... and i put in the installation id number it tells we cannot complete this transaction because "Microsoft" has no "Record of this being a valid Product" and it tells me to verify that i have a valid product.....
View 9 Replies View RelatedI am trying to disable the 'sent from windows mail' signature on my emails. From my gmail account I have done this flawlessly through the account settings, toggling signature to off. However, for my other account, the option to remove the signature has been disabled. I believe it is because it is the account linked with my microsoft login, and therefore integral to Windows 8. At the bottom it says (paraphrased) 'This is the microsoft account you use to login to windows, to change this account, you must go to 'change pc settings'
Whilst I can find 'change pc settings' in the Windows 8 menu, there is no option to remove email signature here from what I can see.
Got a new toshiba recently, windows 8. For the last 2 days it keeps going automatically into airplane mode, making me loose my internet connection. How to turn it permanently off?
View 5 Replies View RelatedIs there a way to make this taskbar thumbnail preview stay visible permanently ?
So I can continue using the PC / Browsing etc and have that preview stay active ?
I am using a dell latitude e6430 laptop and just recently i encountered this problem- The airplane mode of my computer refuses to be turned off.
I tried going to the pc settings > networks but the selection is grayed out and stays at [on]. This results in my computer not being able to connect to the internet.
I have also tried doing a system restore to the date when it was working perfectly fine, but the airplane mode is still grayed out.
The only way i could access my internet on this computer is to tether my mobile phone and connect it to the wifi via USB tethering.
Is there any way to force off the airplane mode(In command prompt etc) or Remove the option?
My computer has always had intermittent BSOD but generally it's been only 1-2 a month and after a system restart everything works fine. In the last couple of weeks I've been getting BSOD after only a few minutes of operation every time I start up and generally after these errors the computer won't boot - sometimes it will be a black screen after BIOS check, sometimes it won't even get that far - just black screen without the BIOS check even starting. Usually the only way to get it to boot again is to disconnect the power and remove the CMOS battery from the motherboard. I've run driver verifier which has indeed generated it's own minidumps but I don't really understand what these error reports are trying to tell me.
View 1 Replies View Related