Hardware Drivers :: Windows 8.1 Won't Load With Extra HDD Plugged In
Dec 20, 2013
I have a dual boot system with Win 7 and a Win 8.1 and all works well. I am using two SSD's with Win 8 and the other with Win 7. Asus Maximus v Gene, i5 3570k and 16 gb ram.
When I boot into Win 7 with an additional internal hdd plugged into a mob SATA port all is ok. However, when I attempt to boot into Win 8 I only get to the moving circle and won 't go any further. If I unplug the hdd the computer boots fine into Win 8.1.
The hdd is set to active and shows up ok in Disk Manager (Win 7).
I have recently bough a new PC. Now that everything is put together and installed I am facing only ONE problem.
I own an Adata Nobility NH13 External HDD which is USB 3.0. When I plug it into any USB3.0 port using a USB3.0 cable, the drive does not show up in My Computer, nor in Device manager, regardless if I use the Front or Rear USB3.0 ports.
The USB2 ports work just fine with it but what is the point in having a USB3.0 device if you don't use it the way you should ... If I plug in USB2 devices in the USB3.0 ports the work great, and even if I connect the ExtHDD with a USB2 cable it does work.
Now, the first thing you would think is that the USB3.0 drivers are missing but in the Device manager, unser USB controllers, there is a Intel(R) USB 3.0 eXtensible Host Controller-0100(Microsoft).
My TV tuner gets full signal when working with the battery while it gets null signal when plugged in to the AC socket whenever the battery is in. The matter is related I think to the battery saving profile. I have an ASUS K75V with i7 - 36300QM, 2.4GHz. OS Windows 8. I tried to set the setting of the active profile equal for "on battery" and "plugged in", copying the settings of the first to the second naturally. It still doesn't work. It seems that is not configurable.
Passing from working (on battery): Process C:Program FilesASUSP4GBatteryLife.exe (process ID:2560) reset policy scheme from {512a6ac6-efc1-4441-85c9-cccf29b69cd2} to {df011ed9-9131-49b9-8090-46963cfb65ce}
To not working (plugged in): Process C:Program FilesASUSP4GBatteryLife.exe (process ID:2560) reset policy scheme from {df011ed9-9131-49b9-8090-46963cfb65ce} to {512a6ac6-efc1-4441-85c9-cccf29b69cd2}
Plugging this drive in while windows is running has no ill effects.
Whenever the USB is left attached during a restart or shut down. the pc fails to load windows. It just has a blinking cursor on the black screen.I have 5 more USB drives that don't affect windows loading at all. So I'm pretty sure it isn't in the BIOS.
I just checked in my device manager and found and new device installed that I didn't install. It's a WAN miniport (Network Monitor) #2, which has the yellow triangle and exclamation point in it. Windows can't laod drivers required for this device. (code31)
I don't have any wireless hardware on my PC. This was installed on 5/15 and I believe it came with the last the 8 auto updates (18 of them I think) because the dates match. It wont update through device manager, it wont uninstall.
I need to reinstall Windows 8 and it tells me that I need to load a driver before the install can begin. How to do that or where to find the driver for my computer (HP ENVY m6 1125-dx). I know for a fact that its my hard disk driver... SATA driver?
I know that Windows Fax and Scan is not an ideal solution for scanning, but I'd like to avoid installing additional third party software, if possible.
WF&S works fine with my (Canon) scanner. It scans without a hitch. However, it is only able to use the default scan profile. If I try to create my own scan profile, I get this message:
"Windows can't load your scan profile. Your profile settings might not be compatible with this scanner."
I know that my intended profile settings (600 dpi, scan to PDF) are compatible with my scanner. How can I get WF&S to create a profile with my settings?
I'm having trouble getting windows 8 to detect my RTL8188CU after installing the Windows 7 x64 drivers from realtek on Windows consumer preview. I had the exact same issue in developer preview and I was unable to solve it. I'm not sure wether doing a fresh install would solve issues rather than an upgrade to keep personal files.
I recently bought an ASUS N550 with the idea of replacing the HDD with an SSD and using an HDD caddy wanted to put the old hard drive back in and use the extra memory. I took all these steps, copying the contents of the HDD onto the SSD, then putting the SSD in the hard drive position and the HDD in the space where the optical drive used to be.
However, if anything, my pc has become slower since this change. I assume that this is because the laptop is still loading the OS through the HDD. Why is this? If the SSD is in the hard drive slot, I don't know why the OS isn't being loaded through it.
I looked into changing the UEFI Firmware Settings, however it wasn't immediately apparent how to change the boot drive. How I can run my system through the SSD?
For some reason the green bar goes all the way across the top of the screen before the devices and printers menu will load. In then loads without an issue after waiting for almost two full minutes. This is a core I7 Win 8.1 PC with 16GB of ram and an SSD so it screams otherwise.
I do have a lot of devices on my home network but my windows 7 PC which is on the same network loads the devices and printers menu almost instantly. If it were a device hanging up you would think that the Windows 7 PC would also be affected but it isn't. I will say that Windows 8.1 does identify a whole lot more devices that fall into the category of "multimedia devices" on the network than does windows 7.
I just got back from vacation andwent to turn on my pc which worked before on my Gigabyte GA78LMTS2 and now cant boot into Windows, instalation media, anything. it just hangs on the BIOS load screen. I am using AHCI for my sata.
I have an extra SkyDrive folder that has shown up as a sub folder of Documents:
C:UsersEricDocumentsSkyDrive
It synchronizes in both locations, one at the root tree of explorer and one in the Documents folder however in this case I only want one SkyDrive folder not two. Is there a way to remove the one that exists here:
I am using Win 8 Pro 64-bit version for the first time.
Previously I had Win 8 Pro 32-bit installed. There was an internal 250 GB SATA HDD connected as a secondary drive. No partitions. It showed me like 150 mb or so free in that.
Today I installed Win 8 64-bit. And when I connected that 250 GB drive as secondary, it showed me around 800 mb free.
My questions is- the extra free space where did it come from? is it due to 64-bit version of the OS installed now?
Is there a way to disable the taskbar from showing on all my extra monitors? I only need it on my main screen, I do not need/want it on my other 3 screens as it takes away from the total resolution of the screen.
I use a shortcut to restart Windows 8.1 to my UEFI BIOS. The problem is it goes through various screens and selections until I finally get to the one to boot to my UEFI. I was wondering id there was a way to boot directly to my UEFI without going through extra steps? Here's what I'm using now:
After upgrading to 8.1 i see two recovery partitions: Difference between each, or how to find out if i need both.
Secondly,i have a recovery USB flash drive which has boot efi and sources, but the latter is empty. Should i redo that to copy one of the two recovery partitions? (it's 3.7 GB).
Note: i also have 4 DVDs of media recovery, and a single system image on an external hard drive. Not sure how these are related to use of the USB drive,Where is the best description of a recovery process to follow in case of losing a C:drive?
IE won't work, Windows Store won't access, Can't "Refresh" without OS Disk, Won't access extra hard drive or format. Using Windows 8 Pro, don't have original disk. Can I purchase another Windows 8 Upgrade disk and install it to resolve this problem?
My PC is a dual boot system which had Win XP on disk1 and Win 7 on disk2.
When I installed Windows 8 several months ago, I chose to install it on disk1 and completely remove Win XP.
Everything works fine but my log-in screen now contains 4 start-up tabs instead of just 2 (see below):
Windows 8 Windows XP Windows 7 (volume 1) Windows 7
The only tabs which are valid are Windows 8 and Windows 7 (volume 1), the other 2 are non functional. How can I edit this screen and remove these tabs?
I recently installed a HD (WD25EZRX). it's been operating normally for about 2 days.
i was using my comp when i saw an alert that said something about a hard drive error and that my PC needed to be reset to fix it. so i reset the PC and saw another message saying something about restoring to a previous point. i wasn't really thinking and i clicked OK.
upon reset, i noticed the HD in question was now showing up as 1.36TB (it's a 2.5TB HD). it also has a bunch of files from another HD, which is odd.
i've used Error Checking under Tools of the HD's Properties, but the results showed no errors.
i'd like to regain the "lost" capacity w/o having to reformat my entire HD.
System Specs:
Win 8 Pro with Media Center Intel Core i7-3770K CPU Samsung 30nm DDR3 1600 RAM 16GB ASROCK Extreme4 Z77 Motherboard ATI Radeon HD4650 Samsung 840 Pro 128GB SSD (OS)
I am using Windows 8.I am facing an issue with my sound all on a sudden. The volume icon on the task bar has a red cross on it. When I hover on that it says 'No speakers or headphones plugged in' (attachment-1).
When I click on the icon I get a screen like attachment-2 which says 'The peripheral does not appear to be plugged in'.
I checked in the Device Manager to see only 'Bluetooth Headset' listed under 'Sound,video and game controllers'. Also I tried to re-install audio drivers (Real Tech High Definition Audio Driver) which is provided with the laptop to no avail. I don't know whether this is just a driver/windows problem or a hardware problem.
I went to a PC-Shop that fixed it by putting another driver on the PC.But now I have a new PC and after 6 months without any problems Windows suddenly decides there is no ethernet cable plugged in the PC. I've googled for hours and hours trying diffrent things, but nothing seems to work . The cable itself is fine because when I plug it into my laptop it works fine. I've updated my driver, deleted it and try to reinstall, which also failed. I tried out some commands through CMD, which also failed.
It is a custom-build PC with a Asus Z87-A motherboard (in-case that's necessary to know) and the driver that's installed is Realtek PCIe GBE Family Controller. OS: Windows 8.1.
My computer has 2 wireless cards and a gigabit ethernet port. I have my own internet and my neighbors each allow me to connect to their internet. If I were to set the Wi-Fi to connect to theirs, and the ethernet to connect to my internet would I be able to take advantage of the extra bandwidth?
A week ago, i turned on my laptop and discovered that my sound wasnt working. I cheaked the sound menu, it told my that the speakers were not plugged in. I looked in the recording menu which told me my build in mic was not plugged in.
I was able to have sound by plugging my laptop into my tv with a HDMI lead.
I got fed up with a slow laptop and no sound so i decided to reset my laptop, when the reset was finished my mic and speakers worked. I turned it off and when i woke up i turned it back on to find my mic and speaker was "not plugged in". All my drivers are up to date and i have no updates to do.
My laptop won't go to sleep when It's plugged in for some reason, though if I take out the power cable it will sleep. If I have the power cable out, send it to sleep then plug the power cable in this doesn't wake it up.
I've gone into the power option's but I'm not too sure what I can really change to make it work.
I've changed the multimedia setting's to allow the computer to sleep.
I've tried the different power plans - same behaviour.
I went to BIOS and enabled sound, but, when i turned on computer there was sound, but it was show as headphones, and speakers aren't plugged in. Actually is opposite, headphones aren't plugged in, but just like they are, and speakers are plugged in, but they don't work.
Whenever i plug in my headphones[into the speakers], i hear a buzzing noise. its not the headphones problem, i tested them on other devices and there was no problem. I even changed speakers but i still have the prob.
when i plug my samsung note 2 phone in it shows in file explorer with no problems
The computer knows my nexus tablet has been plugged in because it gives me the option to eject it, but it does not show in explorer so I can not drag and drop files on to it
Today I was shutting down my computer because I received the issue of 'plugged in, not charging...' once again. When it was shutting off everything shut down but the power was still on (the blue light on my laptop keyboard was on, it's off when the laptop is off).
I then decided to force-shut down my laptop by holding down the power button. After doing that I tried to turn it back and it refused to go past this screen:
[IMG] [URL] ......
After waiting for a while and returning from a shower it then went to a black screen which only showed my mouse icon. I installed windows 8 about 6 months ago from the official website for a fee; I didn't use a boot disk.
I have a windows eight computer, and when I plug in my microphone (on my headset) my speakers are muted. I assume there is a simple sound option somewhere that does this, but I have been unable to find anything by looking around or searching google. The headset does not mute speakers on other computers when the microphones are plugged in, nor does it differ with other headsets.
