I'm currently using windows 7 and want to install 8.1
I just launched the setup, and on the window where it asks what to keep, the only option is 'Nothing'.
Does windows 8.1 setup delete everything I've got on my current partition, or will it transfer my current system into a windows.old folder like Windows 7 Setup does?
Because I really need to keep my files.
My disk situation is as in the attached screenshot. I have two Windows 8 installed on 2 different partitions of the same SSD. Now I would like to remove the first installation, Windows 8 (H: )
The problem is that the Windows 8 (H: ) partition is marked as System, Active so from reading the forum I know there may be some problems with bootmgr... but I can't understand exactly what to do.
i recently installed windows xp , but now i cannot boot my previous windows ( Windows 8 ) and now i want to delete windows xp so the problem may be solved
so is there anyway to delete windows xp without safe mode ? because when i run safe mode , it stuck on mup.sys and sometimes classpnp.sys
I have a windows 8 partition and vista partition. I want to uninstall VISTA, how do I do this? Do I set windows 8 as my active partition and just delete VISTA partition under disk management?
View 9 Replies View RelatedI was having a problem since my computer shows "windows cannot delete the active system partition on this disk". How to delete the partition on which i have windows 7 installed.
Here is the screen shot ...
i have installed windows 7 and xp in dual boot, but i want to delete both os without leaving any traces and install only one os that is windows 8. i got the tutorial for deleting any one os but how to delete both os and install a fresh windows eight . ?
View 9 Replies View RelatedHow to make a clean install on my Samsung Series 5 550P5C, but I hear from here to there that when I do it I will delete my Recovery Partition (which I would like to have on the disc in some radical case). However I saw a thread when someone performed a clean install and didn't lost the recovery partition. Additionally I think it should not be able to remove it installing Windows on C partition, as this is another partition on the disc - than Recovery part.
View 5 Replies View RelatedI need to delete a recovery partition off my second hard drive. I've seen this link: Delete and Remove to Unlock EISA Hidden Recovery or Diagnostic Partition in Vista - My Digital Life but it's for Vista and the final command "delete partition override" doesn't work in diskpart. It comes up saying "The specified command or parameters are not supported on this system"
Yes, I really do want to delete the recovery partition because it's on my secondary HDD, I still have the recovery partition on my C: so I'm really not losing anything ....
put Windows 8 recovery on a 1TB ext HDD; Decided after to put on smaller HDD & copied to it. Now my 1TB ext HDD reads empty but only 31.9GO! Tried format & Seatools, which says everything ok. How to get my HDD to full capacity again?
I would also like to delete the recovery from the main HDD & save space. I was given this option at the time but can't find it now?
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
View 9 Replies View RelatedI am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
Im trying to install Windows 8 (Not 8.1) but it gets stuck at the booting screen (Where setup shuold load files)
My system specs are on my profile.
I am trying to setup a new Windows 8 computer that is going to be a gift. I need to go through the setup procedure so I can install some software which is also part of the gift. How can I do this without having to use a Microsoft account, or at least with leaving the least amount of account remnants for the new user?
View 2 Replies View RelatedI have Windows 8 consumer preview installed on my laptop. A couple days ago its licence expired, so I got Windows 8 professional to upgrade.
I made an install USB with the win7 USB utility and proceeded to boot from the stick. The setup then told me I should restart my pc and restart the installation from windows.
I did that, but Windows 8 setup won't start. It just starts reading from the usb for a second, then stops. The setup from the .iso I downloaded does the same thing.
To make things more interesting, the first time I restarted my PC after trying to upgrade windows from USB at start-up, I ran Windows 8 setup and it did start and started doing some things, on that small blue screen that pops up. I didn't pay attention to it until the blue setup screen disappeared and nothing else happened...
One more thing, I tried to install Microsoft windows server 2012 on my laptop a month ago and the same thing happened with the setup.
Did a few hours of research on the internet, tried to run it in compatibility mode.Can't really afford to do a "clean" install now, and on top of that, my PC reboots every 2 hours because my licence is expired...
I previously setup a DVP 11 pro tablet by logging in with my outlook.com email account.
Now I am about to setup an AIO desktop . So I am sure the same questions will be asked about logging in with email account and password when first powering up the computer.
My questions are:
a) Should I use the same outlook.com email and password for the second computer as the first ? Will Win 8 even accept this because one tablet is already setup using this same email address and pw . Even if it accepts what are the implications?
b) I would prefer not to sync the Tablet and the AIO computer . In this case should I setup another outlook.com account with separate email address and PW? I guess I can do this by clicking on setup a new account .
c) Actually I would prefer to setup the 2nd computer with local account . But from my experience with the DVP 11 Pro , this option is not available in the setup screens. ie I can't get pass the the first screen that asks for email and password. Since this is a purchased machine and not a clean install , I believe the only way to do this is to first setup with an email account then subsequently disconnect and setup local name and password.
Here: [URL] .....
Somewhere in that link it says:
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection
Others say: <F8> No uefi setup option in boot selection
I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
Here's my issue; I am a math and science teacher in a public middle school and am outfitting my class with thirty brand-new Lenovo touch computers. I consider myself above-average savvy with computers, having worked with every version of Windows extensively since the late 80s and DOS. The only OS that I haven't spent much time on is Windows 8.
These computers are all brand-new and of course have legal copies of Windows 8 -- irritatingly, though not yet updated to 8.1. Soo...It took me a larger part of one day just to get ONE of these computers ready for class use. It involved several stages of the Windows update/reboot dance, followed by removing myriad unneeded bloatware applications, setting up multiple child accounts on the machine, and finally installing some freeware educational materials needed for instruction. It was all unbelievably tedious!
I turned around and look at all the remaining twenty-nine computers with dread. Obviously I'm trying to work out some kind of shortcut to avoid having to spend my whole summer updating each of the new machines individually. In an ideal world, I would make some sort of image of the machine that I just spent several hours updating/configuring, and then replicate that across the other twenty-nine. In terms of hardware, this shouldn't be a problem since all of the machines are exactly the same make and model. But I anticipate other problems such as, for example, the serial number of the Windows version and the computer name will then be the same on all the machines and have to be adjusted. There very well could be other issues with replicated serial numbers, etc.
I'm thinking maybe I just have to bite the bullet and work at each individual computer one of the time. And then image them individually so that when the kids mess around with them, I can do an easy restore. How I could make this work?
When I run setup I get this message:
"Something happened, We can't tell if your PC is ready to continue installing windows 8. Try restarting setup"
What can I do?
Because it does not contain enough free space. Clearly I have enough free space... [URL] ....
What should I do? I want to do a dual boot, so I can keep Windows 7 in case I don't like 8.1...
I formatted and deleted that partition and I tried again with 201gb, and no luck. [URL] ....
In Windows 7 I could adjust the thickness/width of the windows borders.
In Windows 8 I could not find this option in
Personalization-->Window color and appearance-->Advanced appearance any more.
I created a setup USB with the ISO of Win 8.1 and its now out of date after the Spring Update 1. With XP you could slip stream service packs and updates. How I can incorporate Update 1 into Win 8.1 Setup USB stick?
View 6 Replies View RelatedI tried to run "Reset and reinstall windows" when I found out that "keep nothing" is not a clean install.
However, the reinstallation part (Windows setup, with the serial number part) starts over and over again.
I have an HP Envy with Windows 8 pre-installed. I am trying to do a dual boot setup with windows 7, as some of the software I use daily, is not compatible with Windows 8. The new software has yet to be released, and will not run in any compatibility modes.
Knowing this is beating a dead horse, I have searched for hours, and have gotten some of the pre-req stuff done ie: created virtual drive 20gb, initialized it, turned UEFI Mode/Secure Boot OFF, etc.
I can see the vhd, but when I try to load win7, the vhd is not visible. When I exit win7 install, and Windows 8 reboots, I can no longer see the vhd.
I have purchased 2 identical Acer V5-serie (OEM Windows 8.1) . I have setup the first computer (removed McAfee, done setup changes in Windows 8.1, installed freeware programs, etc). Windows 8.1 (OEM) was activated automatically when connecting to internet.
1) Can I "clone" the first computer, create a "Rescue Media" , create a recovery backup, .... or something similar in order to transfer the setup and programs from computer A to computer B ?
On the second PC I'm going to replace the HDD with a SSD
2) Do I need to avtivate Windows 8.1 om computer B first ?
3) I have installed Office 2010 professional plus , it's not activated yet (do I need to ? )
What happens if I choose not to activate it ?
I was casually wondering how to remove the failed Windows Setup that shows up on the Boot screen along with the still functional Windows 7 Ultimate. Funny that the Setup didn't move past the first Reset screen, yet shows up above Windows 7 and, if ya don't arrow down within ONE second, it'll take ya to the infamous Black screen that won't even respond to Alt/Ctrl/Del. Don't wanna reinstall W7 from scratch. How to do this ??
View 2 Replies View RelatedI have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
View 1 Replies View RelatedI have tried updating my Windows 8.1 Pro (64-bit, upgraded from Windows 8 Pro) with the new "Update 1" (KB2919355) but it always fails with ERROR code 8007005 (or 80073712).
What I have tried do to fix:
Run WindowsUpdateDiagnostic (that e.g. removes files from C:WindowsSoftwareDistributionDownload and cleans Windows update history metadata info)DISM.exe /Online /Cleanup-image /ScanhealthDISM.exe /Online /Cleanup-image /RestorehealthDISM.EXE /online /cleanup-image /startcomponentcleanup
After all of this, still the update (KB2919355) fails
There must be something that Microsoft needs to fix, there are xxxxxxxxxxxx amount of similar complains and reports out there...
I decided to install Win 8.1 RTM x64 yesterday but what I expected to be a breeze turned into a nightmare. Installation fails, I am even unable to get into Safe Mode.
I was running Win 7 Ultimate x64 before without any issues whatsoever.
I already described my issues here, with errors and logs: Windows 8.1 RTM installation fails on Dell XPS 1340
Changed memory from 2x4GB to original 2x2GB but completely same issue
I'm trying to install Windows 8 on my pc (hp pavillion g6) which its hdd is completely empty; but it gets stuck on expanding files at 98%
I'm installing it via dvd
I have recently formatted my old windows. But now I am not able to install windows 8(actually even windows XP and seven) . When I try to boot from USB setup starts But 'Getting files ready' (which is second step of installation) stucks at midway like at 14% or 52% or 74% i.e. at any arbitary percentage and nothing happens . Actually I am able to move my cursor but installation no more proceeds further . I have tried to format many times and to run installation but everytime installation stuck at midaway without any error .
My laptop specs are : Acer aspire 5745 , 500GB HDD , 3GB RAM , intel core i3 processor