Using Windows 8 Pro: Why when I click on any of my folder shortcuts on the desktop, my windows, such as My Documents, open in a little (approx) 4" x 4" window instead of a full window. How to get them to open in full windows.
View 1 RepliesNew Toshiba Satellite P70-A085 with Win 8.1 preloaded( an education in its self). Ex XP pro.
Screen will not open to full size, I have to adjust each time. I know there was a trick to do this on old programmes,
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
View 9 Replies View RelatedI want to reset my Windows 8 as there is some odd behaviour going on.
I have my MY Documents, My Photos, My Videos etc... all on the D: Drive.
If I do a reset, will it just format and reinstall the C: drive, or will it wipe the D drive where all my documents are kept too?
I have the display set to extend, have the monitors set to the correct order, and the mouse moves easily across the two monitors. But I can't drag a windows from monitor 1 to monitor 2. I did remember to reduce the size of the window, but while it moves over to the side of monitor 1, it does not appear on monitor 2.
View 1 Replies View RelatedIn Windows 7 I could adjust the thickness/width of the windows borders.
In Windows 8 I could not find this option in
Personalization-->Window color and appearance-->Advanced appearance any more.
When I am uploading a photo, a window appears, 'Choose File to Upload'.
This window appears rather small. I would like it to Re-appear permanently in a larger size.
I try dragging the window from the corners and sides, but it always re-appears in the same small size.
How do I make the window appear in my chosen size permanently?
My DPI is currently on 250% and I like it this way. The problem is that the elements of my windows seem too big now and take up too much space.
If you open "My PC", the bar with "Name", "Type", "Available Space", etc is too thick. Is there no way to decrease the size of this bar and perhaps strip the entire layout like in good old XP? I don't need Groups/Categories twirl down menu, my current directory address/location, back&forth buttons, etc. I just need it simple and compact.
Few tips or tools on manual customization of windows layout? I tried googling but I only found out how to manually resize scroll bars Scrollbar - Change Width Size in Windows 8 ...
No matter how many times I go to 'View' settings, every time I choose a new window (i.e. opening a folder) I am always met with a small-format window rather than a full-screen, full-size one. I also am met with random lists instead of 'medium-sized icons', which I have opted for and chosen as default in 'view'. Have I missed a colossally simple tick in a box?
View 1 Replies View RelatedI'm playing with this free Siri like virtual assistant for Windows PC called SpeakToIt. Speaktoit - Your Personal Assistant
Unfortunatly it's a cruddy Metro UI version and not a real desktop application. I had to use a tile manager tool called OblyTile v0.9.8 to be able to make a desktop shortcut because I don't a truck with 8.1 That tool is here btw: [APP] OblyTile - Tile Creator for all programs. - xda-developers
Now I want this app to run in a window instead of fullscreen. An app like this.. i don't get it.. why leave it full screen when you have to multitask? I'd like to run this in a custom sized window that I can tell to always stay on top of other apps.
Is there a way to do this?
I have a 256gb ssd installed on my laptop and I recently had installed Ubuntu partition on it and ended up removing it. I have instead reinstalled a fresh copy of Windows 8. However I see no other partition during the installation processing and it's saying I only have 238gb available not my disk's full 256gb. So far I tried chkdsk and disk management and it failed to see any other used space.
View 9 Replies View RelatedThis "Save As..." dialog window is mainly used to located files to import to a program.
Here we have the default size:
I want it to automatically fit all column size or have a preset of how large I want it to stretch by default:
*notice the difference with the 2nd one where there is no scroll bar. So everything's in view.
On January 31st, I bought a product key for Win 8 Pro paying $40. I downloaded the Windows.iso that came with the purchase. Afterwards, I burnt the Windows.iso to two separate DVD Roms, opening the ISO with Windows Disk Image Burner.
When one of the two DVD Roms is opened, the program setup.exe presents itself, together with about 9 folders and files. (Please see the attachment, showing the contents of the DVD Rom.)
Setup.exe is obviously the trigger for installing Win 8.
My question is: Will this trigger (setup.exe) install the full Win 8 operating system, using what is stored on the DVD Rom, plus perhaps elements downloaded from the internet during the installation process? Or must I have installation elements on my hard drive, downloaded during the purchase, in addition to the DVD Rom?
In other words, is the DVD Rom burnt from the ISO the "full" Windows 8, the only thing I need apart from my product key, to install Win 8?
As the title states, every time I have gone through the install I still end up with old windows files and an option to boot Win 8 or "older version" I have deleted all partitions on the drive and selected the format option (twice now) but each time the Windows 8 install completes I am presented with this option. This is using a full version Windows 8 disc, not an upgrade.
How can I get past this or get a completely clean install? The old version isn't even complete - it's actually from an aborted install start-up from XP that was inadvertently run as I swapped drives and tried to fix and issue on the machine. Otherwise this disc isn;t even an OS disc, it was used for storing music files as a second drive
I also tried a reformat with Ubuntu and format from the repair option out of the Win 8 setup (I had previously done so from the install option - deleting all partitions, formating, then installing). The disk looked clean but as soon as I boot, it launches back into the XP setup or if I boot from the Win 8 disc and install Windows 8, still ends up with the dual OS option. I don't understand how a repartitioned/reformatted disk is retaining these Windows setup/system files.
How to Migrate OS to new Hard disk of the same or different size.
For this example, I am using a 500gb HDD moving a 250gb HDD.
Windows 8, uEFI, GPT & Secure Boot.
Using Paragon 12.
1) Download Paragon 12 from here: PARAGON Software Group - partition manager, drive backup, hard disk partitioning Free try link: Paragon Backup & Recovery Home
2) Install your New HDD to a USB Dvice.
3) Install & Open Paragon B&R 12.
4) Click on Hard Drive Migration.
5) Click Next.
6) Click Next.
7) Click Next.
8) Click Next.
9) Click Next.
9) Click Yes & Next.
10) Click Finish.
11) Remove old HDD & replace with New HDD.
All Done.
Moving pre-installed Windows 8 from HDD to SSD Originally Posted by Epoch IT WORKED! So I know you posted this awhile ago, but I hadn't tried it because I could only find the paid version. After you posted this link I found the free trial version. I installed the program, went to Disk Migration, automated everything, took out the HDD, put in the SSD, and it boot in less than 5 seconds, perfectly.
Wow! There is a solution.
SSD Originally Posted by diesele This app checks alignment Download AS SSD benchmark 1.7.4739 - Technical Details - [URL]...
Hover the mouse in the top left box and it will indicate alignment or not.
Getting almost 500Mbps read and 400Mbps best write on the SSD :-) As Paragon have updated for Windows 8.1, you will need Paragon 14.
Paragon Hard Disk Manager Professional - Overview
how to move then resize a partition. I have a Dell XPS 12 Win 8.1 system with 7 GPT Primary factory partitions. I cloned the 256 GB mSATA SSD to a 512 GB mSATA SSD.
*** Right now my disk looks like this with (D) empty (no data):
|-OS (C)--|-Data (D)-|-PBR Img-|-None--|-Unallo--|
|-112 GB-|-109 GB--|---6 GB----|-8 GB-|-227 GB-|
|---#5----|-[empty]--|----#6----|--#7---|---------|
I've omitted 4 uninvolved factory partitions, showing only the rightmost 3 factory partitions (#5 #6 #7) and an Unallocated area.
*** My objective--w (D) & Unallocated combined--is this sequence:
|-OS (C)--|-PBR Img-|-None--|-Data (D)-|
|-112 GB-|---6 GB---|-8 GB--|-336 GB--|
|---#5----|----#6----|--#7---|-[empty]--|
I need to know what to do to get this all to happen.According to an expert Dell XPS 12 user, partitions #5, #6, and #7 MUST be contiguous in the last sequence shown, because otherwise a Dell backup program will not work, plus there are other problems.
I'm looking for partition manager how-to details, hoping to simply drag 109 GB (D) over to the right (just left of the 227 GB Unallocated area) then easily make those two a 336 GB (D) drive
My objective sequence HAS been accomplished by the expert Dell XPS 12 user mentioned above who arranged his partitions just like that, although he had different intermediate partition positions and proceeded somewhat differently. He Outlines what he did here:
How to upgrade the SSD in the XPS12 (...whilst avoiding the mistakes I made!) - Laptop General Hardware Forum - Laptop - Dell Community
I've tried partition managers' Resize/Move function with a slider, but exactly how to use the slider to move a partition eludes me.
These partition managers I've tried and have installed now are:
-EaseUS Partition Master 10.1
-Paragon Partition Manager 2014 Free
-MiniTool Partition Wizard Home Edition 8.1.1
(I've also tried its bootable CD that runs under Tiny Core Linux)
Unless I meet my objective above, I can't use my XPS 12 for work, since I need a 512 GB SSD to hold all the existing data I have.
On attempting to open a couple of items in Documents, I got back the error box: ' The requested operation requires elevation'. What does that mean?
View 8 Replies View RelatedOne of the biggest complaints about the Windows 8 start menu/screen, is the fact that it takes up the whole screen, unnecessarily blocking everything a desktop user is currently working on.
I've been playing around with Windows 8.1 Preview, and am getting used to snapping the start screen to the left side, like you can with metro apps, using Win+Arrow.
Because Windows 8 treats the Desktop like an app, it can be displayed on the right half of the screen, while the start menu is snapped to the left half of the screen.
So I'm just wondering whether there's a way to force the start screen to always open at half the fullscreen size? In other words, always snapped to the size.
This would be a great way to meet the fullscreen-start-menu-haters half-way.
Windows Photo Viewer ? now when I open picture I see it not in max size of windows.
View 8 Replies View RelatedI have Windows 8.1 PRO. I have an Excel spreadsheet in SkyDrive. I can open the spreadsheet on my Windows phone and I can open it if I use a browser to access SkyDrive, but if I use the SkyDrive app tile I get an error that Windows doesn't know how to open Excel files. there is a SkyDrive desktop app and SkyDrive Webapps and a SkyDrive Metro app.So, you can't open Office documents using the SkyDrive app?
View 2 Replies View RelatedI have had this problem with all 3 versions of Explorer. If I open a website, as an example RUN: bing.com the pages open full screen. If I use the shortcut on the desktop it opens short about 2 inches on the bottom and another weird thing is that I have a PC right next to this one, the page will open short about 2 inches on the right side of the screen. I have had to resort to Firefox and I have no problems at all.
I am running Win 8.1 on one machine and Win 8 on the other. I had the same problems with XP and Win 7.
I just downloaded windows 8 prof from my msdn, and I made a bootable usb stick with WintoFlash and now when I am trying to install I get this message: Windows cannot open the required file D:/Sources/install.wim. The file may be corrupt or missing. Make sure all files required for installation are available, Error code: 0x80070570. I have looked into the usb stick but install.wim is just there. And I did a disk chek in wintoflash and it found this:
Found problems with source files.
Can't find file D:sourcesoot.wim
Can't find file D:sourcesidwbinfo.txt
Can't find file D:ootmgr
Can't find folder D:oot
Can't find file D:sourcesinstall.wim or file D:sourcesinstall.swm
Total errors: 5
I have two screens and my current settings are: I got my taskbar on both screens with the opened windows in it's own taskbar.
This is good, but I just miss one thing: I can't attach a program/shortcut to the taskbar that is not my main screen/taskbar.
So I have to go to my main screen to open a program from my taskbar.
When a window is open and an attachment (to view pictures) or any additional window is open, i can not close the window "pane" i go to the upper left hand corner and try to drag it to the bottom but sometimes that wont work, another one was when the calulator was open i can not find how to close it if i opened it while having another window open.
View 9 Replies View RelatedWhen I open Chrome on my desktop, Windows 8 opens up a new window to view Chrome. How can I open chrome like how Windows 7 does it? I want to be able to open Chrome and Microsoft Word and view them both side by side.
View 2 Replies View RelatedI just get a blank white page with google.co.uk in the tab.
View 4 Replies View RelatedLets say I open up lets say 'Window A' whether it be Firefox or a my documents window.
I then open up another 'Window B ' on top of Window A. When I close 'Window B', 'Window A' has lost its focus and I need to click back on it somewhere to regain it.
See the diagram attached.
How to enable IE11 to open full screen. I have just changed my default back to IE11 due to Chrome's persistent crashing.
View 6 Replies View RelatedI don't know if this is a Windows issue or just an issue with my software but I was using Corel Paint shop pro x6 and I'm not sure what I did but after opening files or using the save to option several times, all of a sudden the window started opening full screen and there doesn't seem to be any way to minimize it.
I tried to see if I could at least drag it some place but it won't move. I tried going to every side and corner to see if I could resize it that way but nothing happens. This is the only program that opens my folders in full screen so perhaps it has nothing to do with Windows but how I can get my folders to open in a small screen where you can move them over or out of the way of something you might be looking at.
When I open a .pdf it uses the Reader app. I have no problem with that except when I am on a website it opens the pdf in a new half window. Meaning the original site and the .pdf each are in their own side by side window. Yes I can drag it to full but everything I read said it should open full. Or at least that's how I would like it.
I have not found any settings to make it always open full. I should say that if I just open the Reader app on its own it does open full screen.
My setup is :-
Windows 8.1, 64 bit;
Asus RAIDR Express PCIe SSD;
Asus GT630-SL-2GD3-L GPU;
Asus SABERTOOTH Z97 MARK 1 Motherboard, BIOS version 0602, (the first version).
I have two monitors, a Dell u2412m which is plugged into the DVI socket on the GPU, and an iiyama XB2776QS which is connected to the DisplayPort socket on the motherboard. This was the only way I could find to get each monitor to use the maximum resolution it is capable of.
Whenever I open a program I have no idea on which monitor it will be displayed, sometimes a program will display in the iiyama, but the next time I open it I can see it on the Dell. I also find that if I switch the monitors off for a few hours, the next time I switch them on the programme might be displaying in a different monitor.
I am not sure if this is because I am not using the new, horrible, Metro style which Microsoft thought to introduce, or something else. I did try a piece of software called MurGeeMon, but this did not solve the problem.
Could it be because one of my monitors is connected to the GPU and the other to the MoBo?