I bought an upgrade version of 8.1 Pro from my university, so I need to have an os installed before upgrading. However, I want to install it on my new PC, which means I have to install Win7 before upgrading. I wanted to know if I can install win7 and immediately install the upgrade, or is it better to go to windows update and install all the updates before upgrading?
View 3 RepliesAnyways, my machine is running win7 HP with the drive bitlockered, can i just go install Windows 8 straightaway or do i have to decrypt and disable bitlocker first?
View 3 Replies View RelatedI want to upgrade from Windows 7 64 bit Home edition - To Windows 8 64 bit Home Edition.
I currently have my windows 7 installation on drive C (64GB SSD)
My user profiles, Data and programmes are stored on Drive E ( 1TB HDD )
If i use the windows 8 upgrade option - What will happen?.
When I run setup I get this message:
"Something happened, We can't tell if your PC is ready to continue installing windows 8. Try restarting setup"
What can I do?
have Acronis 2013 Plus. What I am trying to do is image the disk of a Windows 7 machine (source) to a machine that had Windows 8 pre-installed (target - Gateway SX2110G).
I connected the Windows 7 drive to the new machine (USB data cable), disabled Secure Boot, and enabled Legacy. Booted to True Image and started the cloning of the drive. Everything seemed to go ok, but as soon as it starts to boot Windows 7, it gives a 7D BSOD. (the same BSOD it gives when I simply plug the source hard drive into the target and try to boot from it).
The source HDD (win 7) boots fine in its original machine.
*I tried the startup repair that's included with the image.. does it matter if I use the one from a disc instead?
I upgraded my system from windows 7 to windows 8 and now my external WDD 1TB drive is displayed in my computer, but when selecting it I get an 'Access Denied'
View 2 Replies View RelatedI have tried installing Win 7 in UEFI on my old Asus K56JV Laptop.
I have used a tutorial by Brink to create the bootable usb. The system can see it but after it has loaded, I get the following message:
Windows failed to start. A recent hardware or software change might be the cause. To fix problem
1. Insert your Windows installation disc and restart
2. Choose your language setting and click next
3. click "repair your computer"
status 0xc0000225
What should I do from here?
I have tried to make the usb both manually and with rufus usb software. The system does not currently run on UEFI, but it supports it, and I have changed it in BIOS. Also I run Ubuntu in dual boot. I don't know if the GRUB interface does anything here, because the recovery will not start either, though I believe it did so last time I formatted the laptop
I am having problems installing UEFI & a Error 0x80004005 with Windows 8.1 OEM saying it can't create partitions for UEFI then creating 2 partitions for MBR installation instead. This using a 400 TB, hard drive, setup with a GPT system & nothing else & ready for Windows 8.1 to create the partitions.
The first time it happened I used MiniTool Partition Wizard Professional, to delete the partitions created by Windows 8.1 & convert the MBR to GPT, then used Wipe Disk function to erase all data and set all the bits to a 1.
The only thing that I can think is upsetting the installation is that I have left the other drives in the system including 1x3 TB drive, 1x2 TB drive and a second 4 TB drive.
The 2 TB drive has "Win 7 Ultimate" installed using MBR, the 3 TB drive is empty but ready to install Windows 8.1 setup with GPT, and the other 4 TB drive has a UEFI Windows 8.1 installed but broken.
I have also tried to install UEFI Win 8.1 on the 3 TB drive but it failed with the same error code as above.
This UEFI takes a lot to get ones head around dose't it, and me being much older than I once was makes it even harder. I have tried this installation at least 3 to 4 times now and doing these "Wipe Disk Functions" every time has so far lost me 3 whole days just in wasted time.
I bought a legitimate copy of Windows 8 Pro Upgrade version about a month ago. While doing a clean install on my desktop computer, I found out that you cannot do a clean install from an upgrade version of Windows. I figured out how to do a clean install of Windows by following the steps on this website: [URL] .....
When I open the Windows Store App, I can't find the option that lets me update to Windows 8.1. Is there anyway I can legitimately update my copy of Windows to Windows 8.1?
I've been using Win7 Ultimate 64x for sometime now and i have all my software Installed on it. I recently bought a copy of Windows 8 and I've been trying not to install it now because i haven't studied a lot of things about it it yet and i need to keep my PC in its current state because of work, but i cant wait anymore..
So here are the FAQs if i may..
1- Can I install Windows 8 and keep my old copy of Win7?
2- Will software such as Adobe Photoshop be installed on Windows 8?
3- Is it as good of a System as Win7?
I have a Lenovo K450 with Windows 8 pre-installed.
I have a new copy of Win7 I purchased from Microsoft a few years back that I would like to install, but my PC seems to be locked to Windows 8.
I can disable the secure boot in BIOS, and install WIN7, but windows update will not function with secure boot disabled.
Can I circumvent this entirely by replacing the motherboard?
Win7 installed on SSD for 1 year now. 2 more HDD: one 2TB (name K: ) one 4TB (name T: )
About 3 weeks ago tried WN8.1 on a third HDD (1TB). After install all looked OK. Boot on WIN7 and windows tried to check disk. I let it and all looked OK. Worked normally in WIN7 and add 300GB+ of MXF files (video recorded with my camera) and 100GB+ on NEF.
After a week (approximate) boot again in Windows 8.1 . Moved from another 1TB HDD (name J: ) 55GB date on partition T (4TB HDD) and downloaded from camera 6GB MXF on partition K. On this moment I realized that on K I don't see recent MXF wrote on WIN7 after last Windows 8.1 boot.
Boot again in WIN7 and let it do Check Disk. No result: in WIN7 a see only what I see in Windows 8.1. Check Disk made an FOUND.000 on K but no files. On T I had back-up all K but some back-up was not complete after writing 55GB on it in Windows 8.1.
Now I'm scanning with recovery programs but on T I thing all is lost because of those 55GB wrote. On partition K a don't see hundred of GB (1.14TB see windows as properties of files but only 150GB free on partition so ther ar some files that ar not see by WIN7 or Windows 8.1). On T partition no unseen files (total partition space - free space = total file properties).
For testing I tried on another 1TB HDD: partition created in WIN7 and write file on it, boot Windows 8.1 and see all files, boot again WIN7 and write another files, boot Windows 8.1 and second write files are not seen.
Now I bought new 4TB HDD for scaning partition K and saving all files from it on new HDD. At this moment I have aprox. 100GB of NEF and MXF on partition K that was overwrite in back-up on partition T and for the moment is lost. Didn't work dual boot with WIN7 and Windows 8.1
I have just downloaded win 8 from Microsoft but I want to triple boot my laptop.
Extra info :
ram 4gb
Hard disk 320gb
Core 2duo processor
I have a Windows 7 computer with Lotus 8.5 on it and I need to transfer Lotus 8.5 and all it's files and emails and the encryption key to the Windows 8 computer. I do not think that Windows 8 will recognize Lotus 8.5 so I had the idea to partition the Windows 8 computer and install Windows 7 on one of the partitions thus making it a dual boot computer, then install Lotus 8.5 to the Windows 7 partition. My problem is Windows 8 is already installed on the computer and Windows website warns not to install the older operating system second.
Windows website warns, "You must install the older operating system first, and then install the more recent operating system. If you don't (for example, if you install Windows Vista on a computer already running Windows 7), you can render your system inoperable. This can happen because earlier versions of Windows don't recognize the startup files used in more recent versions of Windows and can overwrite them." What should I do? I have found some information on installing Windows 7 as a second operating system on a Windows 8 computer thus creating a Dual Boot computer and giving you the best of both worlds and full app compatibility as some of your Windows 7 applications may not be supported in a Windows 8 environment. T
i have one 750GB hard disk with 8 partition. i installed windows 7 in first partition and windows 8 in second partition. i want to hide windows 8 drive when i boot in windows 7 and hide windows 7 drive when i boot in windows 8. with NeoGrub tools in EasyBCD can do this,
View 1 Replies View RelatedI am dual booting Windows 8 and Win7, using one 500gb hard drive. Win7 has been my main OS, so all of my music, photos, etc. are stored there.
How can I access the user data from my Win7 install , from my Windows 8 install?
Everytime I try to go to it from Windows 8 ---- > My computer it says that I don't have permission to access the files for that user,then attempts to do so for some random period of time, and in the end nothing happens.
Is it possible to upgrade from Windows 8 32bit to Windows 8 x64bit or trick the PC into thinking its x64bit so I can install x64bit programs
View 3 Replies View Related1st partition is Win7 SysPrep and the 2nd partition is Windows 8.1 Sysprep. I install Win7 and press Ctrl-Shift-F3 to form SysPrep, same as Windows 8.1 in 2nd partition. I made this becuase I've 25 Dell new Windows 8.1 Computer which are UEFI. I want to clone it to the other 24 Dell computers.
CASE 1 : 2 different partitions with 2 different Windows :
---------------------------------------------------------------
If I install both Windows like above, when Sysprep Generalize Win7, it works fine. But if I SysPrep Generalize Windows 8.1, it's fine also, but never can boot again back to Win7. The start boot option is like this :
Windows 7
Windows 8.1
If I choose to boot Windows 8.1, it's fine. If I choose to boot Windows 7, it ever boot to Windows 8.1. It means nomatter I choose to boot which Windows, it all goes to Windows 8.1 ?
CASE 2 : 1 partition for Win7 + Win81.VHD :
---------------------------------------------------------------
I install Win7 (C and press Ctrl-Shift-F3 to form SysPrep.
I create a Win81.VHD in Drive D: , imagex Windows 8.1 install.wim in it. Also press Ctrl-Shift-F3 to form SysPrep.
Sysprep Generalize Win7 is OK , SysPrep Generalize Windows 8.1 is also OK. But after that I can only boot to Windows 7 fine, when choose to boot Windows 8.1 , it always restart and back to the boot menu ?
I had a computer with windows 7 home premium x64. A while ago I decided that I wanted to up grade to windows 8 and so I partitioned my os drive and installed (OEM) windows 8 Pro on the new partition. During the set up I was able to set up a duel boot system with windows 8 and windows 7. When I look at the drive structure I noticed that there isn't a system recovery partition for windows 7 or windows 8.
I would like to generate a system recovery partition for windows 8 and remove windows 7 but I am not sure how to go about doing this.
My system:
Brand new Asus CM6870 desktop
2 TB HD
16 GB RAM
Win 8 Core (originally installed by Asus)
Motherboard; Asus P8H77-M Pro (AMI BIOS 0606)
Asus did not supply and will not supply original Win 8 media
I also purchased an OCZ SSD with the intention of moving Win 8 to the SSD. The exisiting HD is installed as a UEFI device and I wanted to install Win 8 on the SSD as an UEFI device too.
I installed the SSD on port 1 of the SATA III (AHCI). In every win install attempt I had the HD disconnected. When reconnected, it was on SATA III port 2 (AHCI).
After MANY, MANY attempts, I have Win 8 installed on the SSD and the original Windows 8 remains on the HD. I was unable to to a UEFI install, so I gave up and did an MBR traditional install. When I boot to the SSD, Windows works but I can't see the HD. When I boot to the HD, Windows works but I can't see the SSD.
To make a VERY long saga, less long, I attempted the following.....- created a recovery drive to use to do a clean install on the SSD - didn't work
- "found" original Win 8 Core media and used it to install on the SSD. (It worked but it was a MBR install. I tried this many times using both a DVD and a UEFI formatted USB drive using instructions found on this forum)
Up to this point, any time that Win 8 was installed on the SSD, I could see the HD as a secondary drive. If I booted to the HD, I could see the SSD as a secondary drive.- I then tried to clone the system using Paragaon - it couldn't see the SSD
- I then tried to clone the system using Mini Tool Partition Wizard (as recommended by OCZ) - it proceeded but failed and I got the "Starting Automatic Repair" message that froze the system. After unplugging the SSD, it booted to the HD.
- Based on posts here and other forums, I read that you could use the Windows 8 Pro upgrade to do a clean install. I bought it and upgraded my HD.
- The upgrade would not install on the SSD. It would only upgrade so I re-installed Win 8 Core on the SSD and then upgraded to Pro. (I had to add a PID.txt file with my upgrade licence to the upgrade disk.) After I did this, I could no longer see the secondary drive regardless of whether I booted to the HD or the SSD.- Then I re-installed Win 8 Core on the SSD to see if the Pro upgrade was the issue. - no change I looked in Device Manager and I don't see any errors but I don't see the secondary drive.
I'll attach jpgs of the Device Manager from both the SSD and the HD Win installation"
The SSD appears as unallocated on the HD Disk Manager even though Win 8 is working on that drive! The HD does not appear on the SSD Disk Manager.
I've worked on so many alternatives over the past week that I feel like I'm going around in circles.
I'll settle for a Win 8 MBR installation on the SSD with access to the secondard HD.
I am trying to install a new OS and I want to boot from the CD on Windows 8?
How would I do that?
i cannot boot my asus n82jv with a UEFI usb win7 64bit. It only says:
Windows failed to start. A recent hardware or software change might be the cause. To fix this prob:
1 insert your win installation disc and restart your computer.
2 choose your language settings and then clck next
3 click repair your computer
Status 0xc0000225
Info an unexpected error has occured.
Yesterday, I clean-installed Windows 8 Pro x86 on an old Dell Vostro 1400 laptop which had been running Windows 7 Ultimate, and it activated and ran fine, without even a single exclamation point in Device Manager. I applied the update necessary to make the Store offer 8.1 and proceeded to install it as I've done on a couple other machines. After downloading the thing, it errored out with:
Couldn't install Windows 8.1
Contact your PC manufacturer to see if you can upgrade the System BIOS
When I clicked the OK button, it then gave me the informative and grammar-challenged error box:
Something happened and the Windows 8.1 couldn't be installed. Please try again. Error code: 0xc1900104
Try again Cancel
Ever the optimist, I clicked Try again, and of course, it proceeded to download all over again from scratch, only to error out in the same way. I then downloaded all the Windows 8 updates, although just the one had been necessary on my other machines that successfully upgraded to 8.1, and tried again, only to get the same result.
Today, I've discovered the Windows 8.1 Compatibility Assistant, which avoids the lengthy download of the upgrade every time (Microsoft, maybe you should run it implicitly before downloading 3 GB of transient data), and it tells me:
This PC doesn't meet system requirements
Contact your PC manufacturer to see if you can upgrade the System BIOS
Obviously, no BIOS updates are available, and what exactly is the problem here with my BIOS. The obvious googling turned up nothing except some people with Sony Vaios that had the same problem, which was corrected with a BIOS update, and of course, there is no information on what their BIOS update does to make the 8.1 upgrade possible.
Upgraded my win 7 pro that had virtual XP mode to win 8.1 pro. Everything from Win 7 came with it including my install programs. Noticed the virtual xp file .vmcx is there but can't access it. So I installed Hyper-V and got to the point of connecting to Virtual Hard Disk. Noticed it creats a .vhdx file. I assume this would be a new file with nothing I had on my old .vmcx file. How do I get my old virtual files over to the new one?
If I can't would I be able to install the virtual file that I got from Microsoft's website, WinXpVirtual6.1KB958559x64RefreshPkg.msu (it included a license key), or I need to have another installation disk that has Windows XP with a license key?
So I'm using linux on my hp laptop where was previously windows 8. I have made backup of Windows 8 with HP recovery manager on a dvd and completely formated hdd. Now I want to install windows 8 but only on external hdd. I have tried using official windows 8 iso but it says that my key cannot be used to install retail version of Windows 8.
View 2 Replies View RelatedI already bought and installed Windows 8. I have a i7 laptop with 64bit proccessor but somewhat the company decided to pull it out with win7 32 bit OS. When I upgraded to Windows 8 I wanted to switch to 64bit but didn't find the option for that during the installation proccess. Can I do it now? switching from 32 to 64 (I understand that I will need to reinstall the windows again, I just don't wanna pay again for that).
View 9 Replies View RelatedI have a Windows 8 / Vista dual boot - Windows 8 on SSD on C: and Vista on HDD on D: (data only on E: ) I have not used Vista since installing Windows 8 and now want to remove to free up some space and remove dual boot
Is there an option to keep my files on the drive but simply remove the Vista OS folder and remove the dual boot option? Or do I need to follow process here and "delete volume" and then copy all the files across again from backup?
If I do need to "delete volume" my first issue is that this option is greyed out and cannot be selected for D: drive? How can I sort this? also what do I do with 11GB recovery partition and 3.54GB OEM partition?
pic attached (hopefully)
when i try to install a driver for the serial port PCI i get this error message : " Windows found a driver for your device but encountered an error while trying to install, installation of this device is forbidden by system policy. contact your system administrator . " knowing that i am the administrator!!
View 1 Replies View RelatedI bought SSD and I want to install windows 8.1 there.
I have HDD which runs windows XP. I have no usb, no ODD.
I think I have to boot a setup file instead of windows XP but I don't know how to do it.
I am trying to install Win 8.1 from pendrive, i try to install win 8 too from pen drive getting same error.
View 1 Replies View RelatedIs it possible to install Windows 8.1 as Legacy with MBR? Or only as UEFI with GPT? I'm kind of confused with all this UEFI business, I always used MBR in my Windows installations. Also, Truecrypt does not support UEFI, so if installing Windows 8.1 I should do it as legacy.
Also, how can I control during the install process if I want to set my system installation as UEFI or Legacy?