Setup Installation :: Cloned Win7 Drive Onto UEFI Win8 PC 7D BSOD After Cloning
Jan 9, 2014
have Acronis 2013 Plus. What I am trying to do is image the disk of a Windows 7 machine (source) to a machine that had Windows 8 pre-installed (target - Gateway SX2110G).
I connected the Windows 7 drive to the new machine (USB data cable), disabled Secure Boot, and enabled Legacy. Booted to True Image and started the cloning of the drive. Everything seemed to go ok, but as soon as it starts to boot Windows 7, it gives a 7D BSOD. (the same BSOD it gives when I simply plug the source hard drive into the target and try to boot from it).
The source HDD (win 7) boots fine in its original machine.
*I tried the startup repair that's included with the image.. does it matter if I use the one from a disc instead?
View 7 Replies
ADVERTISEMENT
Jul 3, 2013
Anyways, my machine is running win7 HP with the drive bitlockered, can i just go install Windows 8 straightaway or do i have to decrypt and disable bitlocker first?
View 3 Replies
View Related
Feb 9, 2013
When I run setup I get this message:
"Something happened, We can't tell if your PC is ready to continue installing windows 8. Try restarting setup"
What can I do?
View 3 Replies
View Related
Jun 1, 2014
I bought an upgrade version of 8.1 Pro from my university, so I need to have an os installed before upgrading. However, I want to install it on my new PC, which means I have to install Win7 before upgrading. I wanted to know if I can install win7 and immediately install the upgrade, or is it better to go to windows update and install all the updates before upgrading?
View 3 Replies
View Related
Jan 11, 2013
I want to upgrade from Windows 7 64 bit Home edition - To Windows 8 64 bit Home Edition.
I currently have my windows 7 installation on drive C (64GB SSD)
My user profiles, Data and programmes are stored on Drive E ( 1TB HDD )
If i use the windows 8 upgrade option - What will happen?.
View 8 Replies
View Related
May 8, 2014
I have tried installing Win 7 in UEFI on my old Asus K56JV Laptop.
I have used a tutorial by Brink to create the bootable usb. The system can see it but after it has loaded, I get the following message:
Windows failed to start. A recent hardware or software change might be the cause. To fix problem
1. Insert your Windows installation disc and restart
2. Choose your language setting and click next
3. click "repair your computer"
status 0xc0000225
What should I do from here?
I have tried to make the usb both manually and with rufus usb software. The system does not currently run on UEFI, but it supports it, and I have changed it in BIOS. Also I run Ubuntu in dual boot. I don't know if the GRUB interface does anything here, because the recovery will not start either, though I believe it did so last time I formatted the laptop
View 9 Replies
View Related
Jun 27, 2014
1st partition is Win7 SysPrep and the 2nd partition is Windows 8.1 Sysprep. I install Win7 and press Ctrl-Shift-F3 to form SysPrep, same as Windows 8.1 in 2nd partition. I made this becuase I've 25 Dell new Windows 8.1 Computer which are UEFI. I want to clone it to the other 24 Dell computers.
CASE 1 : 2 different partitions with 2 different Windows :
---------------------------------------------------------------
If I install both Windows like above, when Sysprep Generalize Win7, it works fine. But if I SysPrep Generalize Windows 8.1, it's fine also, but never can boot again back to Win7. The start boot option is like this :
Windows 7
Windows 8.1
If I choose to boot Windows 8.1, it's fine. If I choose to boot Windows 7, it ever boot to Windows 8.1. It means nomatter I choose to boot which Windows, it all goes to Windows 8.1 ?
CASE 2 : 1 partition for Win7 + Win81.VHD :
---------------------------------------------------------------
I install Win7 (C and press Ctrl-Shift-F3 to form SysPrep.
I create a Win81.VHD in Drive D: , imagex Windows 8.1 install.wim in it. Also press Ctrl-Shift-F3 to form SysPrep.
Sysprep Generalize Win7 is OK , SysPrep Generalize Windows 8.1 is also OK. But after that I can only boot to Windows 7 fine, when choose to boot Windows 8.1 , it always restart and back to the boot menu ?
View 1 Replies
View Related
Jun 3, 2014
I have 2 identical HP i5 desktops running 8.1 which was updated from 8. I want to put a cloned drive from computer A in the other computer B so they will appear identical with all the apps etc. I am told that I will get a configuration error in computer B because the product key in BIOS won't match. Will the computer even run with this error to allow me to fix it? I am told to get a toolkit called the Microsoft toolkit which allows extraction and insertion of keys. I think that approach would let me make computer B product key be the same as A. But in doing this I would lose the valid key in computer B. I would like to change the product key in the cloned drive to be correct for computer B.
View 3 Replies
View Related
Sep 15, 2014
I am having problems installing UEFI & a Error 0x80004005 with Windows 8.1 OEM saying it can't create partitions for UEFI then creating 2 partitions for MBR installation instead. This using a 400 TB, hard drive, setup with a GPT system & nothing else & ready for Windows 8.1 to create the partitions.
The first time it happened I used MiniTool Partition Wizard Professional, to delete the partitions created by Windows 8.1 & convert the MBR to GPT, then used Wipe Disk function to erase all data and set all the bits to a 1.
The only thing that I can think is upsetting the installation is that I have left the other drives in the system including 1x3 TB drive, 1x2 TB drive and a second 4 TB drive.
The 2 TB drive has "Win 7 Ultimate" installed using MBR, the 3 TB drive is empty but ready to install Windows 8.1 setup with GPT, and the other 4 TB drive has a UEFI Windows 8.1 installed but broken.
I have also tried to install UEFI Win 8.1 on the 3 TB drive but it failed with the same error code as above.
This UEFI takes a lot to get ones head around dose't it, and me being much older than I once was makes it even harder. I have tried this installation at least 3 to 4 times now and doing these "Wipe Disk Functions" every time has so far lost me 3 whole days just in wasted time.
View 1 Replies
View Related
Feb 17, 2014
I recently purchased an SSD to upgrade my Dell Inspiron 17R SE 7720 that runs Windows 8. This is the SSD I purchased and it came with cloning software: Amazon.com: Samsung Electronics 840 EVO-Series 250GB 2.5-Inch SATA III Single Unit Version Internal Solid State Drive MZ-7TE250BW: Computers & Accessories
I placed it in an external enclosure and cloned my HDD to the SSD using the program. After the cloning procedure the disk management looks like the figure below.
To me this looks good. But when I replace the internal HDD with the SSD it does not boot from the SSD at all. It takes me to the boot options and I don't see the SSD listed anywhere. I may just not be used to the Windows 8 setup.
View 9 Replies
View Related
Aug 10, 2014
I installed Windows 8 with UEFI on a GPT SSD like the tutorial on this very forum states, but I ran into an issue when I plugged in my secondary HDD (1tb MBR?). It won't boot even if I make sure Windows Boot Manager is the primary boot option. What can I do about this?
If I unplug the drive, it boots fine. If I plug it back in, it stops and Windows tries to repair itself.
Apparently if you're using Win 8 with UEFI, you can't have a 2nd drive that uses extended or logical partition. Since I had Ubuntu on the 2nd drive (logical) it wouldn't boot. I haven't done it yet, but If I delete the partition it should work just fine. I created a bootable usb with Gparted and will fix it later.
View 4 Replies
View Related
Jul 17, 2013
I built myself a new system and I am now on my third clean install of Windows 9 Pro. The first installation was nixed due to faulty programs and the second by faulty hardware. This installation seems to be fine, at least my event log is not showing any significant errors. I really don't won't to do another clean install so the question I have is:
Can I install Windows with UEFI without reinstalling on a new hard drive formatted as GPT?
View 5 Replies
View Related
Jan 15, 2014
i have a Lenovo Ideapad Z585 running Windows 8, secure boot, gpt paritioning and UEFI bios.The laptop comes with a factory shipped 1TB Sata drive which i want to replace with a Kingston V300 SDD 120GB drive.
I have followed this guide How to Migrate OS to new Hard disk.Ive run this in another desktop, it completes and i shut down, remove the destination and insert it into the laptop - power up and it blue screens with There has been an unexpected error message. Trying to access the recovery partition says it is damaged but looks like its almost going to load. Looking at the drive in EaseUS paritition master the paritions look a perfect copy apart from the proportional sizing.
AHCI is enabled in bios - i've tried EaseUS Backup clone, task was successfull but again blue screens but this time with a attached device cant be found.
One thing i wasnt sure about, the PC i done the cloning in has a RAID stripe setup but not sure if this effects it.Any one had success in cloning a GPT drive over to a SSD?
I cant do a fresh installation of windows 8 as i dont have recovery discs, nor does the onekey recovery software allow me to do so and id like to keep the recovery parition in tact really.
View 7 Replies
View Related
Jan 25, 2013
I am running windows 8 pro in a Intel i5 3470 + Gigabyte B75M-D3H system with UEFI bios .
I have two drives OS drive is a SSD & a 1 tb HDD with two partitions.
I am removing the SSD & want to transfer OS to one of the partitions on the HDD , the issue is boot files on the small 350mb system reserved partition on the OS drive , not sure how to transfer this partition or if this partion in on the SSD or the HDD.
This what my drives look like , C: is SSD :
Before i installed the SSD , I was running win 7 from the HDD installed in the 170 gb partition , to install the SSD i had to remove the HDD then do a fresh install of win 8 on the SSD & connected the HDD back later ,
The 170gb HDD partition is still untouched & has the old OS files , I want to transfer the SSD partition back to this 170gb partition i.e drive F: in the above pic . I am not sure how to transfer it & what to do with the system reserved partition .
View 3 Replies
View Related
Nov 12, 2012
I've been using Win7 Ultimate 64x for sometime now and i have all my software Installed on it. I recently bought a copy of Windows 8 and I've been trying not to install it now because i haven't studied a lot of things about it it yet and i need to keep my PC in its current state because of work, but i cant wait anymore..
So here are the FAQs if i may..
1- Can I install Windows 8 and keep my old copy of Win7?
2- Will software such as Adobe Photoshop be installed on Windows 8?
3- Is it as good of a System as Win7?
View 8 Replies
View Related
Apr 24, 2014
I have a Lenovo K450 with Windows 8 pre-installed.
I have a new copy of Win7 I purchased from Microsoft a few years back that I would like to install, but my PC seems to be locked to Windows 8.
I can disable the secure boot in BIOS, and install WIN7, but windows update will not function with secure boot disabled.
Can I circumvent this entirely by replacing the motherboard?
View 3 Replies
View Related
Jul 10, 2014
Win7 installed on SSD for 1 year now. 2 more HDD: one 2TB (name K: ) one 4TB (name T: )
About 3 weeks ago tried WN8.1 on a third HDD (1TB). After install all looked OK. Boot on WIN7 and windows tried to check disk. I let it and all looked OK. Worked normally in WIN7 and add 300GB+ of MXF files (video recorded with my camera) and 100GB+ on NEF.
After a week (approximate) boot again in Windows 8.1 . Moved from another 1TB HDD (name J: ) 55GB date on partition T (4TB HDD) and downloaded from camera 6GB MXF on partition K. On this moment I realized that on K I don't see recent MXF wrote on WIN7 after last Windows 8.1 boot.
Boot again in WIN7 and let it do Check Disk. No result: in WIN7 a see only what I see in Windows 8.1. Check Disk made an FOUND.000 on K but no files. On T I had back-up all K but some back-up was not complete after writing 55GB on it in Windows 8.1.
Now I'm scanning with recovery programs but on T I thing all is lost because of those 55GB wrote. On partition K a don't see hundred of GB (1.14TB see windows as properties of files but only 150GB free on partition so ther ar some files that ar not see by WIN7 or Windows 8.1). On T partition no unseen files (total partition space - free space = total file properties).
For testing I tried on another 1TB HDD: partition created in WIN7 and write file on it, boot Windows 8.1 and see all files, boot again WIN7 and write another files, boot Windows 8.1 and second write files are not seen.
Now I bought new 4TB HDD for scaning partition K and saving all files from it on new HDD. At this moment I have aprox. 100GB of NEF and MXF on partition K that was overwrite in back-up on partition T and for the moment is lost. Didn't work dual boot with WIN7 and Windows 8.1
View 3 Replies
View Related
Nov 29, 2012
I upgraded my system from windows 7 to windows 8 and now my external WDD 1TB drive is displayed in my computer, but when selecting it I get an 'Access Denied'
View 2 Replies
View Related
Sep 16, 2011
I have just downloaded win 8 from Microsoft but I want to triple boot my laptop.
Extra info :
ram 4gb
Hard disk 320gb
Core 2duo processor
View 9 Replies
View Related
Jan 1, 2014
I have a Windows 7 computer with Lotus 8.5 on it and I need to transfer Lotus 8.5 and all it's files and emails and the encryption key to the Windows 8 computer. I do not think that Windows 8 will recognize Lotus 8.5 so I had the idea to partition the Windows 8 computer and install Windows 7 on one of the partitions thus making it a dual boot computer, then install Lotus 8.5 to the Windows 7 partition. My problem is Windows 8 is already installed on the computer and Windows website warns not to install the older operating system second.
Windows website warns, "You must install the older operating system first, and then install the more recent operating system. If you don't (for example, if you install Windows Vista on a computer already running Windows 7), you can render your system inoperable. This can happen because earlier versions of Windows don't recognize the startup files used in more recent versions of Windows and can overwrite them." What should I do? I have found some information on installing Windows 7 as a second operating system on a Windows 8 computer thus creating a Dual Boot computer and giving you the best of both worlds and full app compatibility as some of your Windows 7 applications may not be supported in a Windows 8 environment. T
View 1 Replies
View Related
Feb 25, 2013
i have one 750GB hard disk with 8 partition. i installed windows 7 in first partition and windows 8 in second partition. i want to hide windows 8 drive when i boot in windows 7 and hide windows 7 drive when i boot in windows 8. with NeoGrub tools in EasyBCD can do this,
View 1 Replies
View Related
Dec 20, 2012
I am dual booting Windows 8 and Win7, using one 500gb hard drive. Win7 has been my main OS, so all of my music, photos, etc. are stored there.
How can I access the user data from my Win7 install , from my Windows 8 install?
Everytime I try to go to it from Windows 8 ---- > My computer it says that I don't have permission to access the files for that user,then attempts to do so for some random period of time, and in the end nothing happens.
View 3 Replies
View Related
Sep 17, 2013
I have just upgraded to 8 using my 7 settings on a couple of my machines. Is it possible to put back the original 7 SSD drive - clone it to a spare drive and then create the VM set up on that cloned drive using the upgraded drive? I would of course remove the original 7 drive and just use the clone.
I'll just get an OEM 8 to install if what I have cannot be done.
View 2 Replies
View Related
Aug 31, 2013
I had a computer with windows 7 home premium x64. A while ago I decided that I wanted to up grade to windows 8 and so I partitioned my os drive and installed (OEM) windows 8 Pro on the new partition. During the set up I was able to set up a duel boot system with windows 8 and windows 7. When I look at the drive structure I noticed that there isn't a system recovery partition for windows 7 or windows 8.
I would like to generate a system recovery partition for windows 8 and remove windows 7 but I am not sure how to go about doing this.
View 4 Replies
View Related
May 16, 2014
I am running Windows 8.1 and it appears that my hard drive needs to be replaced. When the machine is turned on, frequently there is a slight screech and I feel it's best to replace the hard drive.
How do I make an exact bootable copy of the hard drive on a new hard drive and simply replace the drive with the new drive without having to reinstall Windows 8.1 or other programs and without affecting any of the files currently on the machine? If cloning software is required, are there any free programs I can download?
View 7 Replies
View Related
Feb 1, 2013
My system:
Brand new Asus CM6870 desktop
2 TB HD
16 GB RAM
Win 8 Core (originally installed by Asus)
Motherboard; Asus P8H77-M Pro (AMI BIOS 0606)
Asus did not supply and will not supply original Win 8 media
I also purchased an OCZ SSD with the intention of moving Win 8 to the SSD. The exisiting HD is installed as a UEFI device and I wanted to install Win 8 on the SSD as an UEFI device too.
I installed the SSD on port 1 of the SATA III (AHCI). In every win install attempt I had the HD disconnected. When reconnected, it was on SATA III port 2 (AHCI).
After MANY, MANY attempts, I have Win 8 installed on the SSD and the original Windows 8 remains on the HD. I was unable to to a UEFI install, so I gave up and did an MBR traditional install. When I boot to the SSD, Windows works but I can't see the HD. When I boot to the HD, Windows works but I can't see the SSD.
To make a VERY long saga, less long, I attempted the following.....- created a recovery drive to use to do a clean install on the SSD - didn't work
- "found" original Win 8 Core media and used it to install on the SSD. (It worked but it was a MBR install. I tried this many times using both a DVD and a UEFI formatted USB drive using instructions found on this forum)
Up to this point, any time that Win 8 was installed on the SSD, I could see the HD as a secondary drive. If I booted to the HD, I could see the SSD as a secondary drive.- I then tried to clone the system using Paragaon - it couldn't see the SSD
- I then tried to clone the system using Mini Tool Partition Wizard (as recommended by OCZ) - it proceeded but failed and I got the "Starting Automatic Repair" message that froze the system. After unplugging the SSD, it booted to the HD.
- Based on posts here and other forums, I read that you could use the Windows 8 Pro upgrade to do a clean install. I bought it and upgraded my HD.
- The upgrade would not install on the SSD. It would only upgrade so I re-installed Win 8 Core on the SSD and then upgraded to Pro. (I had to add a PID.txt file with my upgrade licence to the upgrade disk.) After I did this, I could no longer see the secondary drive regardless of whether I booted to the HD or the SSD.- Then I re-installed Win 8 Core on the SSD to see if the Pro upgrade was the issue. - no change I looked in Device Manager and I don't see any errors but I don't see the secondary drive.
I'll attach jpgs of the Device Manager from both the SSD and the HD Win installation"
The SSD appears as unallocated on the HD Disk Manager even though Win 8 is working on that drive! The HD does not appear on the SSD Disk Manager.
I've worked on so many alternatives over the past week that I feel like I'm going around in circles.
I'll settle for a Win 8 MBR installation on the SSD with access to the secondard HD.
View 9 Replies
View Related
Sep 12, 2013
I am trying to install a new OS and I want to boot from the CD on Windows 8?
How would I do that?
View 4 Replies
View Related
Dec 21, 2013
i cannot boot my asus n82jv with a UEFI usb win7 64bit. It only says:
Windows failed to start. A recent hardware or software change might be the cause. To fix this prob:
1 insert your win installation disc and restart your computer.
2 choose your language settings and then clck next
3 click repair your computer
Status 0xc0000225
Info an unexpected error has occured.
View 9 Replies
View Related
Jun 8, 2014
So I'm using linux on my hp laptop where was previously windows 8. I have made backup of Windows 8 with HP recovery manager on a dvd and completely formated hdd. Now I want to install windows 8 but only on external hdd. I have tried using official windows 8 iso but it says that my key cannot be used to install retail version of Windows 8.
View 2 Replies
View Related
Feb 23, 2013
I already bought and installed Windows 8. I have a i7 laptop with 64bit proccessor but somewhat the company decided to pull it out with win7 32 bit OS. When I upgraded to Windows 8 I wanted to switch to 64bit but didn't find the option for that during the installation proccess. Can I do it now? switching from 32 to 64 (I understand that I will need to reinstall the windows again, I just don't wanna pay again for that).
View 9 Replies
View Related
Jan 6, 2013
Here: [URL] .....
Somewhere in that link it says:
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection
Others say: <F8> No uefi setup option in boot selection
I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
View 3 Replies
View Related
