Windows 8 Freezes When Right Clicking On Defrag
Nov 4, 2013My computer freezes when I right click on Defrag from the search menu. When trying to open it, nothing happens. I am able to get to defrag from the control panel.
View 9 RepliesMy computer freezes when I right click on Defrag from the search menu. When trying to open it, nothing happens. I am able to get to defrag from the control panel.
View 9 RepliesI have had this problem with my hp Envy 6 ever since I got it. I installed windows 8 on it however when ever i would right click anywhere in my computer (the view/refresh menu would come however the new/view/sort one would not come) it no matter if it be with the trackpad or a mouse the blue circle would start spinning forever and i would be forced to close the folder i currently have:
Core i-5 1.7 Ghz
4.00 Gb RAM
64 bit Windows 8
(I am not all that sure whether or not i have windows 8 or 8.1 so i can't really say)
I have provided a recording that i have provided in the attachement below:
Something wrong.zip
whenever I right click on the desktop to sort my icons windows 8 freezes and its explorer starts. I've installed my graphics card driver and it still won't like me get the right click menu is there any way to fix this?
View 3 Replies View RelatedI keep reading different interpretations on whether Windows 8 does a trim command or defrag using the new "optimization" utility (formally defrag).
View 1 Replies View RelatedInstalled 8.1 some 2 weeks ago (give or take).
Now today i wanted to look to my 2 external spindle drives if defrag had run and it did run......BUT also on my Samsung SSD's which i never do myself.
Windows 8 erroneously defrags SSDs, indeed. Doesn't look like it's been fixed in Windows 8.1.
Why Windows 8 defragments your SSD and how you can avoid this.
I can't find where the defrag App. is on Win8.
View 9 Replies View RelatedWindows 8, but I've updated my box to Windows 8.1. I have a 250Gb Truecrypt file as my 'Documents stash' which I mount as a separate drive.
On Win 7 I could defrag this but on 8.1 the drive is greyed out not giving me chance to defrag it.
(See attached screenshots from Win 7 HP & 8.1 Core)
I tried to upgrade to windows 8 through the store and if failed horribly, the pc refused to boot a an error code I that don't remember so I decided to wipe everything and install Windows 8.1 from a usb drive. Everything was fine for the past week and a half until 2 days ago when the disk defragmentation tool decided to stop working, I ran the tool many times after installing 8.1 and it has always worked but now I get a 0x80070057 error which should mean that the size of my partition is wrong. I did a chkdsk /r /f that took 2 hours to complete and it didn't find any errors and I also ran a sfc /scannow with no luck.
Here is a screenshot
After spending some time googling for the issue I found out that there are many Windows 8.1 users with the same issue and on the microsoft forums no one seems to be able to fix this. From what I understand this seems to be related to the size values of the partition which according to the defragger are wrong but the tool was working before and I didn't edit the partition in any way.
I'm using Windows 8 Home Premium 64 Bit.
My Disk Defragmenter that came with the system will not open. When I try to open it, a CMD windows appears for 1 second and disappears. I have tried opening it in all ways.
I have tried:
Safe Mode
Sfc /Scannow
Chkdsk
Anti Malware scans
I need something like the answer for this question, only a way to do it in Windows 8. His instructions only work on Windows 7.
Disk Defragmenter won't open in Windows 7
im using Windows 8 64bit and every time I try to defrag or optimize it it goes to pass 2.92% and just hangs there for hours before I just give up. also anylize takes forever to complete
View 9 Replies View RelatedI have this wired volume in my defrag screen after windows 8.1 upgrade what the heck is it here is a picture. Highlighted in blue is the volume ??
View 4 Replies View Relatedi bought a new laptop (HP Envy m6-1140sg) some weeks ago. I have Nortin Internet Security installed.
I wanted to try out that NIS Trial Reset because HP Laptops have NIS already installed. I rebooted my Laptop into safe mode with Network and then started it. I accidentally chose to Purge my NIS. I didn't know what purge means. . I opened the Trial Reset app again and chose to revert my trial to 60 days. Then it disappeared. I rebooted my laptop in Normal Mode and then tried to open NIS. But it didnt come up. I uninstalled NIS and then I noticed this:
When I try to open the Explorer on the desktop, the screen would just go blue and then Explorer closes itself. 2. When I right click a shortcut or anything the screen also goes blue. After the screen goes blue it would go normal again.
PS. I can only open Explorer when i open it through an other shortcut. ex. I got a shortcut to an directory (C:Program Files (x86)Microsoft GamesMicrosoft Flight Simulator XaerosoftAirbus X ExtendedDocumentation) That is the only way I can open Explorer, but as i said, the screen will go blue if I right click anything.
At present I cannot run any program installer except by right clicking and choosing 'Run as Administrator'.
This has happened twice recently and the cause is totally unknown to me. I have just recently re-installed everything afresh, and this morning I have got the same problem - I clicked on an installer and the following error message popped up:
Unable to execute file in temporary directory. Setup aborted.
Error 5: Access is denied.
Reason and a remedy for this?
So I tried to open defrag today for the first time with using Windows 8 and when I click on the application the command prompt opens and closes in about two seconds and then nothing happens.
View 7 Replies View RelatedBought windows 8, and everything immediately opens if my mouse is over. I don't click, it is just over a link, or an app, and it is opens. And YES, I did not chose at mouse setup, the function. What to do?
View 9 Replies View RelatedI installed programs called vaultClient by SourceGear, Mumble (a chat client) on my machine, needed to do a reboot. After rebooting, the Start interface show up with all the tiles and what have you, but clicking into Desktop rendered nothing, clicking any of the program tiles, nothing. Going into Apps and trying to open programs, nothing.....I can't do anything but look at the Start interface, but when clicking on my machineName icon to Sign out, that works.
View 6 Replies View RelatedHow can we reset the size of the screen that is presented after clicking on a tile in windows 8? I have two monitors and have my desktop going across both monitors the way I like it. However when you click on a windows 8 tile, the screen it brings up fills both monitors. its annoying because whatever I am viewing is centered down the middle of two monitors and trying to read it is awful. I want to be able to set the window size that appears after clicking a tile to be half a screen (only one monitor). How to accomplish this? I know you can go to desktop mode and it will be sized however I like it, but I need to change the size of the windows after clicking the tile.
View 2 Replies View RelatedApp that works well with Windows 8.1, to make clickety sounds when you type on a regular keyboard? You know, so it will sound like a typewriter or something like that. Something that gives you a little audio feedback when you type, but doesn't have gimmicky, "funny" sounds.
I tried ClicKey, which is a good program because you can adjust the sound level, but it didn't work well for me. It stopped clicking after while.I also tried KSG, but it didn't work at all. I tried quertick, and it works fine, but you can't adjust the sound level.
I have the touch keyboard toolbar enabled in Windows 8. I'm talking about this:
It used to work just fine a couple of days ago but as of yesterday or so it stopped working. I click the keyboard icon but nothing happens. This still happens after resetting.
I Defraged my comp to Optimize. After defrag, my mouse and keyboard no longer worked. I tried restarting, unpluging and switching to a wired mouse and keyboard. I can't get the comp to recognize them. I also switched between back and front ports.
View 4 Replies View RelatedDo you use the built-in Windows Optimize Drivers (Disk Defrag) or do you use a third party product?
If third party product, which product and why?
I am running Win 8 Pro.
My set up has 2 x 650 GB WD Black hard drives and a Samsung 840 (non pro) for the boot drive.
I have run the latest Samsung Magician, however the BIG problem is that it has stopped the windows 8 Defrag program.
I reinstalled Win 8 and all was OK, (now for the bit about me being thick -- ) I thought I would try the old version of Samsung Magician, and Bu**er me if has not only done the same thing again, turned off defrag and optimize, I am just unable to open defrag in order to defrag my WD drives.
I do not really want to reinstall Windows 8 again unless I have to, so how to switch defrag bag on again.
Whenever I run defrag this happens:
It goes away after about 0.1 second and I can't read what it says (it goes by to fast)
It seems that Windows 8.1 Pro's scheduled defrag is consolidating free space, which is taking forever on one of my 2 TB data drives, which has about 300 GB free space. I stopped it at about 9%, and dfrgui immediately showed it as "OK (0% fragmented)". Clicking its Optimize button resulted in the defrag phase completing almost immediately, but then it was back to consolidating free space, starting at 5% this time. According to Task Manager, it's read/writing about 40 MB/sec, and the Active Time is over 90%. I really don't want this to go on for hours and hours and potentially repeat itself during future scheduled scans. Is it possible to alter this behavior, or should I just disable the weekly defrag task?
View 7 Replies View RelatedI haven't been updating my windows for a while so decided to do it today. However when I finished the latest one, I was met by this:
Is it meant to do this? What can I do to get rid of this?
Ive got a bit of annoying problem with one of my Windows 8 computers. For some reason when I right click in the bottom left corner the administration tools don't appear like they do on other computers. Oddly though they do work fine on the same computer using another user account.
I use a roaming profile and I've tried deleting it and allowing it to be reloaded but that hasn't worked.
Edit: just want to add that the administration tools menu works fine on all other windows 8 computers using the same roaming profile.
I have to alt tab and then come back and then it works. Did they test this..? It doesn't do it on my laptops though.
1920x1080 is the display res at 120hz
Also the tiles ARE being clicked. They get punched in, but they don't actually do anything.
not that this is a hardware issue, but specs anyway:
2x120gb vertex 3 raid 0
2xgtx460s sli + 120hz asus vg236h
p8z77-m
2600k @ 4.6ghz
I installed Windows 8.1 earlier and had this (apparently common) watermark error on the desktop about SecureBoot having a problem.
I went into my BIOS, made sure it was enabled, and then set up some kind of "key" that the directions said to do. I clicked save and exit, and after that instead of booting into Windows, I'd be at a black screen, everything running inside my computer, and with my keyboard and mouse both turning on at the same time, then turning off at the exact same time 3-4 seconds later along with a quiet sort of clicking sound inside the computer. Over and over, looping endlessly.
I opened it up, checked connections, removed parts and tried booting with each thing moved. It only finally booted when I removed my graphics card and plugged my monitor into the onboard DVI port.
After that I shut down, put my graphics card back in, booted with the monitor still plugged into the onboard DVI, and it booted without issue. I then plugged the monitor back into the graphics card DVI port and rebooted. Went back to the clickly flashy no-POST cycle. After repeating this whole process a few times, I realized that when it's in that cycle, if I just plug the monitor into the onboard DVI port, I get the POST beep and everything boots up.
Eventually I just did some messing around in the BIOS, turned SecureBoot off as well as disabled onboard graphics and then booted the PC back up with the monitor in the graphics card DVI port. It boots fine now, I've rebooted 5-6 times now and it goes into Windows 8.1 no problem.
I currently have installed UXThemePatcher, UXStyle, Start8 and
White Title Bar Text: Windows 8 default theme - White TitleBar Text v1.1 by maddada1 on deviantART
Could any of those effect why this happens, also on Windows 8.1 and have installed the Windows 8.1 compatible versions of the software.
My mouse works fine on the tile screen, but won't click when on the desktop screen. It moves fine and if I move it to the corner I can click on the setting button, but its anything on the desktop,or programs that run from the desktop that are effected.
View 1 Replies View RelatedI just bought a Seagate ST750LX003 Momentus XT 750 GB as the new primary drive for my gaming laptop, and I'm wondering how to defrag them, and whether it is safe. I wanted the best of both worlds (space and speed) so I went for the middle ground. What is the difference between a regular HDD, SSHD, and a SSD? Do I just let Windows perform its' normal defrag routine as I normally would, or do I need to download some kind of proprietary software from Seagate that will do it? I like to use 3rd party software (UltimateDefrag) for my defrag operations, is all. And how much can I fill it up before it starts to slow down? I ask because I've heard that you cant fill an SSD up past around 50 to 60% or so before it slowly starts to degrade, since it needs room to perform its' TRIM (defrag) operations. Is this also true of SSHDs?
View 5 Replies View Related