Suddenly No POST And Clicking Sound
Oct 18, 2013
I installed Windows 8.1 earlier and had this (apparently common) watermark error on the desktop about SecureBoot having a problem.
I went into my BIOS, made sure it was enabled, and then set up some kind of "key" that the directions said to do. I clicked save and exit, and after that instead of booting into Windows, I'd be at a black screen, everything running inside my computer, and with my keyboard and mouse both turning on at the same time, then turning off at the exact same time 3-4 seconds later along with a quiet sort of clicking sound inside the computer. Over and over, looping endlessly.
I opened it up, checked connections, removed parts and tried booting with each thing moved. It only finally booted when I removed my graphics card and plugged my monitor into the onboard DVI port.
After that I shut down, put my graphics card back in, booted with the monitor still plugged into the onboard DVI, and it booted without issue. I then plugged the monitor back into the graphics card DVI port and rebooted. Went back to the clickly flashy no-POST cycle. After repeating this whole process a few times, I realized that when it's in that cycle, if I just plug the monitor into the onboard DVI port, I get the POST beep and everything boots up.
Eventually I just did some messing around in the BIOS, turned SecureBoot off as well as disabled onboard graphics and then booted the PC back up with the monitor in the graphics card DVI port. It boots fine now, I've rebooted 5-6 times now and it goes into Windows 8.1 no problem.
View 7 Replies
ADVERTISEMENT
Mar 15, 2014
I am being driven mad by the clicking sound every time I do a keystroke on my wireless keyboard, how do I turn it off? Have disabled windows sounds so none play. I have gone into typing in PC settings and the turn sounds off is not there.
View 1 Replies
View Related
Jul 22, 2014
It's definitely not a hardware problem as one minute it's all working, then it suddenly stops. I've tried everything. My sound card drivers are all up to date, it also happens at the same time as youtube videos stop playing on google chrome (despite them loading), windows media player is unable to play and an error occured on youtube on firefox.
However after a few hours it finally lets me on the "configure speakers" setting and I click test and it begins to play sounds again, from then on it plays sound and loads videos.
Edit: When I click "test" it tells me "The device is being used by another application. Please close any devices that are playing audio to this device and then try again."
View 2 Replies
View Related
Sep 19, 2014
Cant get any sound via built in speaker or headphone jack. Have checked settings through speaker volume icon lower task bar, Dell Audio control icon, and checked for audio enabled or not through device manager/soundvideogamecontrollers/Realtek high def sound etc. All looks perfect.
This loss of sound MAY have happened after running SUPERAntiSpyware that my ex-computer "expert" installed and instructed me to run regularly. I lost sound also when he last serviced my computer and installed SUPERantispyware (among other unknown things he did), but he somehow restored the sound through changing a power management option I think. I just tried that again to no luck.
But what it means when someone says "install new drivers" or "reinstall drivers" - my Windows 8 came preloaded and upgrade to 8.1 has failed twice so I gave up - nothing to do with this problem arising though.
View 14 Replies
View Related
Sep 14, 2013
I have a dual boot Win 7, Win 8 setup. Suddenly the audio has stopped working on Win 8. (Works fine on Win 7) I checked for driver updates, even "installed" an old driver which didn't actually install. The volume control shows its trying to work, puff of green comes and goes at the bottom of the slider.
However I've tried "cleaning" for other concerns and that made a real mess of the setups for several programs. I suppose I could do a refresh but that's equivalent to a re-install..
View 9 Replies
View Related
Aug 16, 2014
I have been having an issue recently with my Windows 8 HP laptop where it'll just stop playing videos (whether if streamed through the internet such as you tube or if played on the actual computer as a downloaded video) or the sound for said videos just won't play. The problem can usually be temporarily fixed by restarting my computer but it gets annoying to restart my computer constantly because a video is not playing or the sound is not working so I am trying to see if there is a permanent solution. Adobe flash player is up to date and the problem has been occurring before and after I updated flash player.
View 1 Replies
View Related
May 7, 2013
While playing a video or games or any app that has sound... the sound suddenly disappears if it is too loud. At first I thought it might be the driver... so i replaced HD Audio with Conexant... but the problem still persists, which lead me to believe that it could be probably the speaker's problem.
But while tweaking around I found that if i quit the video or the game, the sound came back to normal. And also when the sound goes off,the green bar on the volume tray icon still keeps jumping up and down indicating sound output. Hence audio troubleshooter was of no use.
When i opened volume properties,playback devices (a video playing in the background where the sound had gone off),as i switched between the tabs in the dialog box (playbackrecording,sounds,communincation) the sound came back! This cannot be due to the speaker.
I have reinstalled windows8, updated drivers and everything but no effect. What to do, as i cannot see movies or play games with speaker. Also headphones and external speakers have no problem whatsoever.
View 8 Replies
View Related
May 18, 2014
The touch screen keyboard click sound suddenly reduced loudness. This is happening on my DVP 11 running win 8.1
Used to be much louder, then this afterneed it just went soft on me. Is there a setting somewhere to restore the keyboard click loudness?
View 7 Replies
View Related
Sep 13, 2013
I have a Toshiba laptop running windows 8.1 and the issue that Im facing is that suddenly sound stops working, most likely when playing youtube videos. This is what I've done so far:
Reinstalling drivers (microsoft, realtek, conexant)
Upgraded to 8.1 (I had this issue as after a few weeks I installed windows 8, never happened on 7)
HDMI and headphones outputs are working just fine.
When I was on windows 8 I could make the speakers work by just clicking on disable and re-enable from the sound properties, If I disabled the microphone the speakers started to work again which I have no idea why that used to happen. Now on 8.1 the only way to make them work is by closing the lid or restarting the laptop which is pretty annoying.
These are the current (default settings) I have played with them but nothing fix the issue.
View 5 Replies
View Related
Feb 21, 2014
Is there a reason why the path box by "Browse" PC is missing on the "Insert Image" in certain threads and/or at certain times? The insert box appears for inserting URL, but not for PC. I've been trying to post pics here: Thoughts on Windows Phone 8?, but it's been 2 days I haven't been able to. It's been happening now and then since joining.
View 9 Replies
View Related
Aug 1, 2014
I'm running 8.1 on a newly purchased Acer TC-603. It's a dedicated machine for a networked video recording system. It runs Blue Iris, and records from about 25 IP cameras, storing the images on an external 4TB USB3.0 HDD.
Everything works as it should, until the system reboots or powers up. At that point, I get past the post screen, where it detects two SATA drives (the internal SSD and the internal DVD), but then hangs. It will not continue. I have to turn off the PC (or ctrl-alt-del) and pull the USB cable from the external drive before it will load into Windows 8.
I've tried various solutions (i.e. disable USB legacy support in BIOS), but nothing seems to be working.
I'm quite familiar with changing the boot order on all of my other PCs (W7). But on this machine, the options are limited to "Windows Boot Manager", removable media, LAN. But how does one tell the WBM to only look at the internal SATA connected drive, and ignore the USB drive?
I've never seen a BIOS that had Windows Boot Manager listed.
I've turned off secure boot. I've disabled legacy USB. I've disabled the Launch CMS feature (with then allowed the PC to detect USB thumbdrives on the f12 boot menu). But no matter what I do, I HAVE to remove the external HDD for the system to boot.
Needless to say, for a security-sensitive application, having a PC that relies on the HDD for storing video removed is not an option.
View 9 Replies
View Related
Aug 9, 2014
I had my notebook for about 7 months and it has worked fine for me. It's an hP winter blue with 4gb of ram. Today I force shut down the laptop, which I've done many times before, but this time it wouldn't reboot properly. So I had to refresh my PC. When it refreshed I noticed that it was EXTREMELY buggy and laggy and slow. Like it take 3-4 minutes to open a program or to close a window. I tried to update to windows 8.1 but it said I had to update my current windows. There's 102 updates but it stays at 0%....
View 5 Replies
View Related
Jun 20, 2013
how do I post photo's in outlook.com email?
View 5 Replies
View Related
Aug 23, 2013
i bought an Acer Aspire M5 for school and wanted to do a clean install of windows 8 to remove bloat ware. I installed it using legacy mode from a usb boot stick. I than learned about UEFI and how it is a better option. So i followed the guide here, used Rufus to remake my usb boot. I put my bios into boot from usb hdd in UEFI mode, plug usb in. Than my computer goes into an infinite loop where it splashes the acer logo and restarts never getting.
View 6 Replies
View Related
Aug 6, 2014
I installed hyper v on my machine which is running Windows 8.1. Then I created a Virtual Switch on my wireless network. After that, it was not working in the VM but the wireless connection in the host was working fine. After that, when I connected to a different wireless network, it did not work. I deleted the bridge, uninstalled hyper v, but it is still not working. I installed hyper v again, but it is still not working. The wireless connection connects to the wireless network after putting the password, but does not give network connectivity to the internet.
I need to get the wireless connection to work again.
View 1 Replies
View Related
May 24, 2014
So my laptop has been getting multiple BSOD errors during or shortly after startup. I let my roommate download and play WoW and Ventrillo. And the issues started shortly after, first with the game simply crashing and escalating into the computer itself not working correctly. I figured the best place to start since it didn't have much stuff on it was to just put my stuff I needed on a USB and do a factory reset. Which seemed to make no change. I have run memtest once for four passes and it found no errors.
I can remember a few of the errors I have been getting.
Bad Pool Header
Memory Management
IRQL not less or equal
Kernal Security Check Error/Failure
There was also one or two other memory related ones that I cant remember the exact wording of.
View 2 Replies
View Related
Aug 21, 2014
I haven't been updating my windows for a while so decided to do it today. However when I finished the latest one, I was met by this:
Is it meant to do this? What can I do to get rid of this?
View 6 Replies
View Related
Aug 3, 2014
I have a Samsung Series 5, 530U (the remaining digits I don't recall right now).
I purchased it from a digital superstore, like a market, rather than a regular PC store.
The device is set for Windows 7, although on purchase, I asked for Windows 8 to be installed.
Now, a BSOD has stopped me gaining access through refreshing, restarting, safe mode or any of the options available through the troubleshooting menu.
I retrieved my data using a SATA, and now wish to wipe the system of Windows 8, and avoid all the hassle it has brought me, returning to it's factory settings of W7.
I do not have a disk, or anything to do so. When I go through the menu on start-up, I click 'restore system' but I am then prompted for 'recovery mdeia or installation disk'.
Is it possible to just reset the whole PC and start from the day it left the factory?
If I need a disk to reset the original settings, where can I get it from and would simply loading it when prompted fix my problem?
All I want is to be able to use my own PC. I want Windows 8 cleared off and a reliable, original settings PC.
View 5 Replies
View Related
Nov 4, 2013
My computer freezes when I right click on Defrag from the search menu. When trying to open it, nothing happens. I am able to get to defrag from the control panel.
View 9 Replies
View Related
Jan 23, 2013
Ive got a bit of annoying problem with one of my Windows 8 computers. For some reason when I right click in the bottom left corner the administration tools don't appear like they do on other computers. Oddly though they do work fine on the same computer using another user account.
I use a roaming profile and I've tried deleting it and allowing it to be reloaded but that hasn't worked.
Edit: just want to add that the administration tools menu works fine on all other windows 8 computers using the same roaming profile.
View 3 Replies
View Related
Sep 19, 2012
I have to alt tab and then come back and then it works. Did they test this..? It doesn't do it on my laptops though.
1920x1080 is the display res at 120hz
Also the tiles ARE being clicked. They get punched in, but they don't actually do anything.
not that this is a hardware issue, but specs anyway:
2x120gb vertex 3 raid 0
2xgtx460s sli + 120hz asus vg236h
p8z77-m
2600k @ 4.6ghz
View 9 Replies
View Related
Jul 23, 2013
I have had this problem with my hp Envy 6 ever since I got it. I installed windows 8 on it however when ever i would right click anywhere in my computer (the view/refresh menu would come however the new/view/sort one would not come) it no matter if it be with the trackpad or a mouse the blue circle would start spinning forever and i would be forced to close the folder i currently have:
Core i-5 1.7 Ghz
4.00 Gb RAM
64 bit Windows 8
(I am not all that sure whether or not i have windows 8 or 8.1 so i can't really say)
I have provided a recording that i have provided in the attachement below:
Something wrong.zip
View 9 Replies
View Related
Jan 24, 2013
i bought a new laptop (HP Envy m6-1140sg) some weeks ago. I have Nortin Internet Security installed.
I wanted to try out that NIS Trial Reset because HP Laptops have NIS already installed. I rebooted my Laptop into safe mode with Network and then started it. I accidentally chose to Purge my NIS. I didn't know what purge means. . I opened the Trial Reset app again and chose to revert my trial to 60 days. Then it disappeared. I rebooted my laptop in Normal Mode and then tried to open NIS. But it didnt come up. I uninstalled NIS and then I noticed this:
When I try to open the Explorer on the desktop, the screen would just go blue and then Explorer closes itself. 2. When I right click a shortcut or anything the screen also goes blue. After the screen goes blue it would go normal again.
PS. I can only open Explorer when i open it through an other shortcut. ex. I got a shortcut to an directory (C:Program Files (x86)Microsoft GamesMicrosoft Flight Simulator XaerosoftAirbus X ExtendedDocumentation) That is the only way I can open Explorer, but as i said, the screen will go blue if I right click anything.
View 2 Replies
View Related
Dec 7, 2013
I currently have installed UXThemePatcher, UXStyle, Start8 and
White Title Bar Text: Windows 8 default theme - White TitleBar Text v1.1 by maddada1 on deviantART
Could any of those effect why this happens, also on Windows 8.1 and have installed the Windows 8.1 compatible versions of the software.
View 2 Replies
View Related
Apr 25, 2013
At present I cannot run any program installer except by right clicking and choosing 'Run as Administrator'.
This has happened twice recently and the cause is totally unknown to me. I have just recently re-installed everything afresh, and this morning I have got the same problem - I clicked on an installer and the following error message popped up:
Unable to execute file in temporary directory. Setup aborted.
Error 5: Access is denied.
Reason and a remedy for this?
View 9 Replies
View Related
Nov 10, 2013
My mouse works fine on the tile screen, but won't click when on the desktop screen. It moves fine and if I move it to the corner I can click on the setting button, but its anything on the desktop,or programs that run from the desktop that are effected.
View 1 Replies
View Related
Apr 5, 2013
Bought windows 8, and everything immediately opens if my mouse is over. I don't click, it is just over a link, or an app, and it is opens. And YES, I did not chose at mouse setup, the function. What to do?
View 9 Replies
View Related
Feb 18, 2014
I installed programs called vaultClient by SourceGear, Mumble (a chat client) on my machine, needed to do a reboot. After rebooting, the Start interface show up with all the tiles and what have you, but clicking into Desktop rendered nothing, clicking any of the program tiles, nothing. Going into Apps and trying to open programs, nothing.....I can't do anything but look at the Start interface, but when clicking on my machineName icon to Sign out, that works.
View 6 Replies
View Related
Sep 15, 2014
I have the laptop as stated above, i have had it a week and the user before me had decided to put on 7 instead of 8. i completely wiped and restored to windows 8.1, installed all sammy drivers and ensured it is all up to date.
the laptop had huge instability issues, the hdd was on its way out as mbr was damaged and the heads were ticking badly. then i found the ram was not secured in the sockets properly too. so i fixed it all!
Anyways back to the problem. i have the realtek hd audio drivers installed from sammy, reinstalled the ones from realtek themselves and still nothing.
Main issue, mic and speakers built in work and are fully detected. but the microphone port and headphone port are not detected, no matter what i plug into them.
View 5 Replies
View Related
Nov 17, 2012
How can we reset the size of the screen that is presented after clicking on a tile in windows 8? I have two monitors and have my desktop going across both monitors the way I like it. However when you click on a windows 8 tile, the screen it brings up fills both monitors. its annoying because whatever I am viewing is centered down the middle of two monitors and trying to read it is awful. I want to be able to set the window size that appears after clicking a tile to be half a screen (only one monitor). How to accomplish this? I know you can go to desktop mode and it will be sized however I like it, but I need to change the size of the windows after clicking the tile.
View 2 Replies
View Related
Mar 31, 2014
App that works well with Windows 8.1, to make clickety sounds when you type on a regular keyboard? You know, so it will sound like a typewriter or something like that. Something that gives you a little audio feedback when you type, but doesn't have gimmicky, "funny" sounds.
I tried ClicKey, which is a good program because you can adjust the sound level, but it didn't work well for me. It stopped clicking after while.I also tried KSG, but it didn't work at all. I tried quertick, and it works fine, but you can't adjust the sound level.
View 4 Replies
View Related
