Hardware Drivers :: Went Back To HDD - Optimize Drives Still Showing Solid State Drive
May 7, 2013
My SSD (Intel 60GB) was becoming too small to hold my Windows 8 system partition so I found another use for that SSD and went back to HDD. I transferred whole SSD to HDD with Paragon Backup & Recovery 2013 free, and now the system gladly boots from HDD.
But Windows 8 is somehow still thinking that they are running on SSD. For example "Optimize Drives" (Ex Windows Defragmenter) shows "Solid State Drive" as media type and probably because it can't access TRIM functions, it is unable to defragment the drive, so it is yelling that "Optimization is not available":
How do I convince Windows 8 that they are running from HDD again?
I have tried to remove this disk from "Disk Drives" in Device Manager, also I removed/reinstalled everything under "IDE ATA/ATAPI Controllers" and "Storage controllers" without any success.
View 2 Replies
ADVERTISEMENT
Feb 1, 2013
I just bought a Seagate ST750LX003 Momentus XT 750 GB as the new primary drive for my gaming laptop, and I'm wondering how to defrag them, and whether it is safe. I wanted the best of both worlds (space and speed) so I went for the middle ground. What is the difference between a regular HDD, SSHD, and a SSD? Do I just let Windows perform its' normal defrag routine as I normally would, or do I need to download some kind of proprietary software from Seagate that will do it? I like to use 3rd party software (UltimateDefrag) for my defrag operations, is all. And how much can I fill it up before it starts to slow down? I ask because I've heard that you cant fill an SSD up past around 50 to 60% or so before it slowly starts to degrade, since it needs room to perform its' TRIM (defrag) operations. Is this also true of SSHDs?
View 5 Replies
View Related
Jan 18, 2013
Do you use the built-in Windows Optimize Drivers (Disk Defrag) or do you use a third party product?
If third party product, which product and why?
View 9 Replies
View Related
Aug 20, 2013
I am currently running Windows 8 64 bit and when I go to "My Computer" it is only showing my C: drive. I know my other drives (internal, external and dvd) are working because I can enter the directory name (ie. H: or E:) into the address bar and the content appears. Is there any way to fix this problem so that they show up in "My Computer"?
View 9 Replies
View Related
May 17, 2013
Since refreshing win 8 my DVD drive doesn't appear in 'computer' and doesn't boot from the win 8 disk. The green light on the drive flickers and you can hear the drive reading the disk.
View 3 Replies
View Related
Feb 28, 2013
I have a TDK 16GB usb pen drive that shows in Device Manager when inserted but not in Computer. It does sometimes appear but very rarely. I have updated all driver via Device manager an they are fine.
View 4 Replies
View Related
Dec 26, 2013
I just upgraded to Win 8 and as I did my multiple external drives got assigned letters that are not what I had before. No problem. I went o Disk Management to reassign the drive letter but letters J, K, L, and M are not available. There are ones before and after those letters that are available but I need those letters.
View 4 Replies
View Related
Sep 8, 2013
I have been experiencing problems trying to back up to external hard drive this week and keep getting an I/O Error with various error messages including 0x8007045D My Hard Drive is "G" and I can see it through my computer no problem and I also have my ITunes library on it and the ITunes music is working fine.
I am getting a message in Action Centre saying my Back Up did not complete successfully and then I have the option of Try to Run Again or change back up settings. If I select Try to Run again windows cannot find the disk or network location and if I change settings "G" does not appear. It seems Back Up has detected an error on my "G" which is preventing it from running the back up.
Also in Disk Management I am prompted to initialise a disc before logical disc manager can access it so I select MBR and I get I/O device error and disk 1/G is unknown/not initialised.I have tried powering the external drive off/on and also disconnecting it from the computer but no difference and at present I cannot save anything to the external hard drive. There is a previous back up already on the hard drive but this is not accessible at present.clearing this error so I can back up again without loosing what is stored on the hard drive in particular my ITunes library.
View 9 Replies
View Related
Jan 4, 2014
My Seagate Portable Drive seems to work as the green light comes on.
Screen shot of my Disk Management below. Am I missing something?
Other solutions have been to right click and assign a drive, but those listed below other that the C: don't allow.
Using OS Windows 8.1
View 4 Replies
View Related
Jan 25, 2013
"Restart to repair drive errors" keep showing up after reboot !!
it's showing again & again....how to fix this ...
this is windows 8 not windows7
View 9 Replies
View Related
Apr 4, 2013
I was listening to music and surfing net on my Windows 8 running HP 650 laptop, when suddenly everything froze.I restarted the laptop by hard pressing the power key. But now at the start-up, the laptop is showing "No OS was found on Boot Drive, please install OS and try again".
When i used the windows 8 DVD for refreshing/resetting it, it says can not refresh because the drive is locked.
i tried running linux from a live image, but that linux also does not list my HDD when i use GParted to check.
I also tried doing a fresh installation from my Windows 8 DVD but when it asks for location to install Windows to, it does not show any drive!.
View 3 Replies
View Related
May 16, 2014
Just installed 8.1 on one of my machines. The 100 mb "system reserved" boot partition is showing up as drive E in the drives. It does not show on my other Win 8 machine. Why would this be? Is there some way to hide it?
View 9 Replies
View Related
Sep 15, 2014
I was trying to install elementary OS alongside Windows but when the installation was finishing it crashed. When I went back to Windows my hard drive didn't appear and now it says in Manage>Storage>Disk Management Disk 1 Dynamic - Invalid i posted a picture of this.I tried with Ubuntu then on the other disk same thing happened. Is there a way to get them back to normal without losing the data?
View 9 Replies
View Related
Sep 15, 2014
I saw the File History screenshot tutorial.In that tutorial there is an Option 3 -> Point No. 3: To Select a Network or Local Drive Location to Save File History.When I click the select drive button,none of my local drives are showing up.What to do?
View 1 Replies
View Related
Jan 25, 2013
Normally I could go to control panel>View Installed updates and it would be there. Problem is, it appears as though it was preloaded on the machine so the Internet Explorer 9 update isn't even listed.
View 2 Replies
View Related
Aug 13, 2014
I have a 3-months old Dell laptop, which I need to do a factory reset for, using the recovery partition.
Since I don't have an external hdd available, in order to backup everything I needed (roughly 95 GB), I shrunk my C drive by 100 gig and created a secondary partition, and just moved my files there.
Now, if I remember correctly, unlike windows disc-installation, it will not let me choose which drive to format and install the new OS on, it'll just delete everything and restore it to the state it was in when I first got it.
Since both drives are on the same HDD, will it actually be deleted? (the secondary drive). If yes, what can I do to "tell it" not to touch that drive?
System:
Inspiron 15 3537I5-4200U6GB DDR31TB 5400RPMAMD RADEON(TM) HD 8670M 2GB DDR3
View 7 Replies
View Related
Jul 14, 2014
I have two wifi adapters i have been trying to get to work consistently with no luck for several days now. One had been working fine for a few weeks, then it stopped, i tried switching, and that one worked for half a day, then it stopped. Once it stops working the connection is 'limited' but works fine on other machines, or it says it is connected in settings but Chrome says it isn't online. So i wanted to try to install a different driver, having read that this can often be the solution.
But in both cases, there is no old driver to roll back to, and when i try to tell Windows to load a driver i've downloaded or have on a disc, it says, no, the one it already has is 'up to date', and it won't do it. Is there some way to dig around in the system to get rid of the driver it claims is better so i can try another one?
View 9 Replies
View Related
Jan 21, 2014
I sometimes get "Driver Power State Failure" after logging into Windows 8 (not 8.1).
I believe it is my Sierra Wireless 760S Aircard 4G modem causing the issue but I'm not entirely sure, and sometimes it doesn't detect it until I unplug and reconnect the usb cable after booting.
View 2 Replies
View Related
Nov 12, 2013
i am running windows 8 on my Toshiba Satellite L 300 , it was running smoothly and all its features are good too. but suddenly the screen turns out a solid color based on the color which was on desktop ( for example if i am having a yellowish theme, the solid color will be yellow ) .. i have seen a lot white and light yellow color the most when the screen change . after the color change the total system will be unresponsive, the only way i find is to press the power button for 2 seconds, ( ya full power off ) ... again if i start the system, may be it will work perfectly for a long time but suddenly again it happened..
the problem start before two weeks, i thought it may be due to some software error and i done a full system reboot and i don't have any program installed except windows 8, but still it exists. .. now i am sure that problem is somewhere in windows OS or my hardware ... i am unable to find whats going on ..
View 2 Replies
View Related
Jun 25, 2014
Is there a way to force any new folder that are created be customized to be 'Optimize this folder for' - General Items no matter the contents (ie video, photos,etc.)?
View 1 Replies
View Related
Sep 15, 2014
ASUS X55C notebook I had windows 8.1 installed and my comp stop reading blue rays, so I called tech support. they told me to mail it in. they change my HDD cause a bad sector and installed normal windows 8 but changed my dvd/cd rom drive to matshita dvd ram. I use to have matshita dvd ram UJ8A0AS and it did play blue rays. now i'm calling back and they are trying to tell me that my model doesn't play BR's. that's the reason why I bought my computer. their call center verified all that. so can I add that driver to my device manager.
View 9 Replies
View Related
Mar 18, 2014
I'm currently testing Windows 8 To Go in a enterprise environment. I have some of the officially certified 64GB Kingston Workspace drives, Kingston DataTraveler Workspace 64 GB USB 3.0 Flash Drive - 1 Pack - Newegg.com, and they work fine but at $129 per USB they are too expensive to purchase that many right now (And these are the cheapest official option currently). I am now looking to find some other cheaper models of 64GB USB 3.0 drives that have their RMB set to Fixed (so they appear to Windows at a Fixed disk instead of a removable disk).
I've contacted a few USB manufactures and they have been less than useful at even understanding what the RMB setting is, and then on which of their own drives they may have switched it to fixed on. Sandisk actually switched all their USB drives over to appear as Fixed drives last year, and then they switched them all back to appear are removable again, so if you order a SanDisk USB drive in the past few months, it's a bit of a crap shoot in terms of what you get. I tried to order a few different ones but have not yet found a 64GB USB 3.0 USB drive that appears as fixed, except for the expensive WTG certified USB Drives.
Any other regular 64GB USB 3.0 USB drive's that are configured to be fixed drives in Windows?
View 2 Replies
View Related
May 27, 2014
I was playing an online game when suddenly I've got a runtime error which froze the screen. I had to push the power button and my laptop restarted, slowly than usually but otherwise O.K. However, when I tried to do the maintenance using the Optimize tool this is what I see now:
The "volumes" (for the lack of a better word) Push Button Reset and ?Volume{9789f0... that have never been showing before are showing now and when I try to force a manual optimization the window just blinks but doesn't do anything. I've had the optimization set to "weekly" but after that I and it changed to "daily" for at least 3 days now but this didn't solve the problem. Highlighting and right-clicking doesn't work.
View 7 Replies
View Related
Aug 2, 2014
I like to keep a whole bunch of USB Flash Drives around for bootable Windows media, recovery, etc. I have a bunch of Patriot Xporter XTs and these were really fast and cheap drives. I can't seem to find them as cheap as I used to because they are discontinued.
All of the 2014 roundups compare USB 3 drives, but I haven't had much luck installing Windows from USB 3 drives even on USB 2 controllers.
View 4 Replies
View Related
Apr 14, 2013
If I plug in a drive (via a hub) and it does not appear in the drive list, is there a way to force a scan for new drives?
View 8 Replies
View Related
Feb 4, 2014
Just purchase this HornetTek X2-U3 JBOD USB 3.0 (HT-3210U3) - 3.5" DUAL BAY - JBOD - HDD ENCLOSURES
The only reason was because I had a spare 1TB drive and 500GB drive that I wanted to span into one volume, according the product spec it supports JBOD, which from my understanding should allow hard drive spanning, I understand that if one drive goes the data is lost, but that is not a concern of mine as I have numerous backups of my data. The problem is when I try to span 2 disk I get the following error "The operation is not supported by the object"
Here's a screenshot of the drives in question :
View 4 Replies
View Related
Jun 12, 2014
i have just installed windows 8.1 64Bit on my pc which was originally running windows 7 64Bit I have 2 internal backup drives in addition to my normal boot drive Both these drives have data and worked perfect in Windows 7 but in Windows 8.1 only one shows up When i try to access the one I can see it says drive not accessible Access denied It also shows used space and free space as zero bytes When i know it is at least half full.
Its a 2 terabyte drive same as i the one i cannot see at all I have uninstalled both drives reinstalled them updated every driver possible I have windows 8.1 on a slide in drive as windows 7 When i slide Windows 7 back into the same machine both drives show up no problem.
Its an ASUS M4A785TD-V EVO Motherboard I am begining to wonder would a Bios update if there still is one available
As this motherboard is getting on a bit now.
View 2 Replies
View Related
Jul 21, 2013
I have a Sony Vaio all in one but it doesn't have a cd drive. I've purchased two and neither were recognized by Windows 8. Can found a USB optical drive recommended?
[URL]
View 2 Replies
View Related
Jun 24, 2014
On my windows 8.1 PC whenever I plug in any USB pen drive the thumbnail for the device is always an image of a Sandisk Cruzer Titanium as is the identity when I go to the safely remove hardware toolbar.
The Sandisk probably was the first pen drive I plugged into the machine when new but surely it should be picking up details of subsequent devices or at the very least showing generic details.
View 9 Replies
View Related
Feb 22, 2014
This is what Windows Explorer and Disk Management show.
Drives G, H, I, and L are completely non-existent. When clicking on them, Windows asks to format them. Properties shows 0 bytes Used space/Free space. I need removing these "drives" from Windows Explorer.
View 2 Replies
View Related
Oct 31, 2013
I am running Win 8.1 Pro x64. Today I noticed that the "Eject" option from the right-click menu doesn't work for either of my 2 CD-Rom drives, nor for a "virtual" drive - I get the same error message on all 3: "An error occured while ejecting [drive]".
Device Manager shows no errors, and I've tried uninstalling the drives and rebooting, but error persists.
Also, to be clear, it is NOT a physical problem with the drives, as I can open them without a problem through the buttons on the front.
Finally, if for some reason I can't fix this issue, any way to at least just DELETE the "Eject" from the context menu?
View 9 Replies
View Related
