How To Reset Bad Sector From NTFS Table
Mar 18, 2013
I have been having problems on my primary hdd, and after doing a full hdd scan, I found that I had some bad sectors, which caused some windows hangs, problems, and some bad file reads.
After googling for programs to recover and fix those bad sectors, I have found HDD Regenerator, which did a wonderful job, on fixing and recovering all my bad sector by using a patented algorithm to magnetize again those bad sectors on my hdd.
But after that, I still have marked on my ntfs partition those bad sectors, even tough they are ok now, how to I reset the bad sectors on my partition, to mark them as good to use, Without losing the contents of my hdd?
View 9 Replies
ADVERTISEMENT
Jan 29, 2013
i brought an HP Pavilion G6 and it comes with an GUID partition table (GPT), EFI and Secure Boot. However i need an MBR partition table, so i tried disk managerment but the option "convert to mbr" is greyed out and when i run the "diskpart - list disk - select disk 0 - convert mbr" i get an error "cannot convert a partition which has a pagefile on it" (disabling the pagefile didn t worked).
I guess my only other option is to format it, but the notepad comes with an lincesed Windows 8 which i dont wont to loose. So what are my options? I dont ave the CDs, as it s HP packet.
Update:I ve successfully formatted my Notebook. All i had to do is enter legacy mode, disable secure boot and boot from the Windows 7 DVD. So if you ave no intention using Win 8 it won t be a problem to "downgrade" in an UEFI/EFI System.
View 9 Replies
View Related
Nov 28, 2013
I have been using a program called Family Tree Legends for years now, but just recently when I try to open the program I receive the following message: "This program has been damaged, possibly by a bad sector of the hard drive or a virus. Please reinstall it." I have removed the program and reinstalled it several times and it still won't work. It's a family tree program that I used almost daily and now I'm concerned I lost everything. I even tried to open the program via the administrator function but it still won't work.
View 2 Replies
View Related
Aug 22, 2014
It always fails to Clone/copy my current hard that has bad sectors, to a new hard disk. My present HDD is a 320GB and its health is really bad. I bought a new 500 hard disk and tried to clone and copy the whole HDD. I tried Paragon HDD Manager, O&O disk image and other two Software. All of them failed to clone or copy my old hard disk to new one.
What is the best solution. Paragon, copied data partially and gave an error at 80%. I tried few times and the same thing happened
View 2 Replies
View Related
Apr 30, 2013
I have a reallocated sector count warning current 253 worst 252 threshold 63 data 7 status warning.
View 6 Replies
View Related
Mar 6, 2013
Hey, for like the 8th time now I've had to format my computer due to a blue screen error. The last error was HAL.dll missing or corrupted. My boot sector or whatever the correct name for it is, keeps getting corrupted and it will never repair, it just freezes at 2% and keeps looping. The drive I am using is the Corsair 240GB FORCE 3 SSD and I am not sure if the problem is due to SSD being bad or my motherboard being too old. I have the ASUS Striker II Extreme...
My second problem is, on my latest format, Windows 8 refuses to activate, it claims I cannot do a clean install and this is what I have been doing all the time. The other thing is that I cannot complete a Windows update, when it restarts, it says it has failed and rolls back the changes. I am not sure if this is because it wont activate but.
Now Windows has a problem with showing my real location, so I am getting the wrong weather reports and so on. One more thing I forgot to mention, I can't even check my system rating. Last time I did I check before the format my system was rated as 6.6, that was my lowest rated hardware and that was the SSD. Is that a normal score for an SSD?
View 8 Replies
View Related
Jul 30, 2014
I recently tried installing Ubuntu dual boot with my Windows installation as I had done with a previous system. I somehow failed to notice I had whole disk selected rather than the option for partition. Well. Obviously it wiped my whole disk along with my Windows 8 installation. I aborted the Ubuntu install progress right away and shut down, of course it was too late to save everything.
I resorted to Testdisk. It was able to find my C: (windows) and M: partitions, which I am able to restore in order to copy and access my data, but not simultaneously. It must be only C: (Acer) or M: at a time.
At this point my data is safe. My only concern now is fixing the Windows installation, I had neglected to create a recovery drive until after this headache transpired, and that was done with my friends Dell machine. I do not have any Windows 8 discs or drives, nor do I know how to aquire it without purchasing, which is not an option.
I suppose I'd like to know if I'm going to be able to boot Windows again, using testdisk to restore the proper partition table setup and (I don't need M:, it's been backed up)
I cannot restore or refresh the system via the recovery Usb created on the other pc as it reports the drive is locked.
Laptop is an Aspire V5-552p-x440.
I cannot access Acer Recovery.
View 9 Replies
View Related
Mar 19, 2013
I will be receiving a new laptop shortly, namely the Yoga 13, whose SSD is partitioned into no less than 8 partitions from the factory. I suppose the first thing I'd like to do is backup the entire drive with all its original partitions before I start messing with it. I've heard good things about the free version of Paragon, so I think I will use that with their USB boot key. Questions:
1. Would I indeed be able to restore the factory SSD *exactly* the way it was prior to backing up the entire disk, partitions and all, from an external USB drive?
2. How is a backup/restore related to the GPT table of the GPT disk? In other words, if I plan to wipe the disk and re-install Windows 8 from media, doesn't this Windows 8 install write to the GPT table? And if so, would a restore of the factory disk also restore that GPT table?
View 4 Replies
View Related
Jan 6, 2013
I have Windows 8,W7,Wxp working well in multiboot. But i have Windows 8 instaled in C:but it is the 2nd partition.How can i move it to first partition ?W7 and wxp are probably on the 1st D: partition.
View 2 Replies
View Related
Sep 7, 2013
I previously had Windows 8 installed on my desktop - I've just booted to Windows 8.1 Pro Setup so I can install it on my desktop - I've formatted my hard drive from within the setup but when I try to install Windows 8.1 Pro on the partition, I get the following error message:-
'Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI Systems, Windows can only be installed to GPT Disks'
What can I do now as I don't have a version of windows installed anymore...
View 9 Replies
View Related
Jul 12, 2013
MDL project. There are a few BIOS dumping tools out there but none specific to this task as yet.
The image could then be used in replacement for the standard W8 flag on systems without UEFI.
View 2 Replies
View Related
May 9, 2014
I am currently working on a desktop and ended up formatting the HDD it was in RAID, but removed the other and switched connection to SATA...
Wiped everything off of it and loaded Windows onto it,
On EVERY boot I get the same error message
"Fatal Error - failed to locate memory table(s) to make adjustments, press any key to continue"
I press any key and it continues to boot into the windows..
I have done some research on other forums, and end up finding the same issue "reload windows there are some file issues" but that's not my issue, because i CHANGED the RAM 2 times with different ram AND installed windows 4 different times.
View 2 Replies
View Related
Jan 25, 2014
Any decent free/low-cost software package for recovering data from an NTFS partition? My Windows 8 has gone down and I suspect the file system has become corrupted.
View 5 Replies
View Related
Nov 22, 2012
With UEFI BIOS,Windows 8 make my data HDD to RAM file systems during partitioning HDD and WIN 8 cannot recognize it after finishing Windows 8 installation and log in.
Is That Windows 8 bug or AMI UEFI BIOS's bug.
If the RAW is GPT's file systems format. The system HDD why is NTFS not RAW.
View 7 Replies
View Related
May 13, 2013
(Or how to remove Write Protection from Pendrive). Pendrive doesn't have any write protection lock key on it.
View 1 Replies
View Related
Dec 18, 2013
Suddenly Win 8.1 (on partition F) can't read anymore my other partions on the same drive, also it coudn't read my external USB drive.
When clicking on the partitions c: or d: it says 'cannot access local device' and 'device not ready'.
I have a dual boot system with Windows 7 and 8.1. I can boot into Windows 7 and read all partitions. I also checked the MBR which looks fine. I also have controlled in Computer Management that all drives have a letter assigned.
However Windows 8.1 can read my USB drives and the installation DVD of Windows 8.
Clicking on properties of e.g. drive c: there is of course no security tab, so it shouldn't be a question of permissions. Also no error codes in event log.
Booting in safe mode does still does not solve the problem. Of course Windows 8.1 can read perfectly its partition where it has been installed.
I know, a repair or refresh might be the solution, but if possible I want to avoid it.
Checked also with my different antivirus and spyware programs. All comes clean.
View 6 Replies
View Related
Jan 19, 2014
I've had my Sony Laptop for under a year now, and it was working alright (with the occasional problem such as BSODs), but today after having hibernated the computer (never shutting down/restarting) for a month (because I went on holiday), I finally was forced to shut down by Windows update. However, when I booted up again, it signed me into a temporary user account. This had happened to me before, so I didn't think much of it, I tried to do a system restore, but came up with the error: 0x80070005. I tried different restore points, but they all yielded the same results.
Then I tried doing an sfc /scannow, which said nothing was wrong. I also scheduled a chkdsk /f/r for boot. Unfortunately it got stuck on 28% for over an hour. So I turned the computer off. When I turned it back on, I was unable to sign in: "The user profile service failed the sign in user profile cannot be loaded". So I restarted the computer. This is where it got really bad.
As soon as the computer boots up, it shows the loading signal then instantly goes to the Windows 8 BSOD saying that there was a problem with NTFS File System.
Now each time I boot up, it does the exact same thing. What do I do?? I haven't had this laptop for long. The laptop is still under warranty, am I able to get it fixed under warranty.
View 3 Replies
View Related
Oct 30, 2012
I purchased a new SSD drive for running windows 8, while installing I unplugged all of my other drives in my machine including a WD 2TB drive I use for files. I cannot seem to get the Windows 8 installation to be able to access the drive when I select it it says "F: is not accessible. Access is denied" after following the instructions below. The drive is recognized by the machine still, I just cannot access it from this Windows 8 partition?
"Access Denied" or other errors when accessing or working with files and folders in Windows
Long press the folder you want to take ownership of, then tap Properties.(If you are using a mouse, right click the folder, then click Properties.)Tap or click the Security tab, tap or click Advanced, then tap or click Change.Tap or click Edit. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.Type the name of the person you want to give ownership to and click Check Names.The person that you're giving ownership will have their account displayed in the box, click OK.If you want that person to be the owner of files and subfolders in this folder, select the Replace owner on subcontainers and objects check box.Click OK.
View 3 Replies
View Related
Feb 8, 2014
I have linux install and I want to install windows 8.1 but it says I need ntfs to install it, what do I do ?
View 6 Replies
View Related
Oct 29, 2013
How to convert an old FAT32 NAS drive to NTFS without losing the data on it?
convert z: /fs:ntfs gives error message cannot convert network drive.
View 4 Replies
View Related
Sep 15, 2014
OK, so I made a backup DVD of some OS related programs for my computers onto a DVD, but when I attempted to MOUNT the image from the disk to Win 8.1's included virtual drive, I get an error that the Disc Image is not formatted for NTFS file system, and cannot be mounted.
I can copy the files from the disc to a location on the desktop and execute the files from there, but it's a royal pain in the neck to do this every time.
(Yes, I understand, I probably will need to build a new image and burn it to a new DVD, but I want to make it one that I can run the disc from my optical drive and it will work!).
USB is volatile storage, and can be erased. I prefer hardcopy backups for this reason.
View 1 Replies
View Related
Jun 26, 2014
I am just built a new pc and installed and updated all drivers properly. But it keeps crushing and most common bsod is "Ntfs_File_System" and "Service_Exception_Not_Handled". I searched almost all of similar forum post and i still get bsod's. İ have tried to run Memtest86 and it couldnt find any error in rams. Sometimes data corruption occured in my several files and i have ran HD TUNE to find any bad sector but it was ok too. I have done all i can and it still crushes 2-3 times a day.
About system:
Windows 8.1
Asus p9x79 motherboard
Asus Gtx770 o.c. graphic card
Intel i7 4820k processor
I couldn't attach my minidump files so i have uploaded them: [URL] ....
View 2 Replies
View Related
Jan 3, 2014
It is a 64 GB Toshiba USB drive (TNU). Problem is that every time I try to format to NTFS the normal way with Windows 7 or Windows 8 I get the message: Windows was unable to complete the format.
I tried to format it using the specific software from the drive manufacturer, TNA.
A friend managed to format it to FAT32, but the next time I tried to access the drive Windows showed a message saying that I needed to format the drive to use it. Then there appeared only the exFAT option.
I also tried some partition software, like AOMEI Partition Assistant Standard Edition, and it could format to both FAT32 and NTFS, but when I removed and put the USB drive back Windows again warned me about the need to format and again I had only the exFAT option left.
View 9 Replies
View Related
Jul 17, 2014
i'm using Windows 8 Home 64 Bit.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
View 9 Replies
View Related
Sep 15, 2014
So I did a factory reset on my pc, came back into the room to see that my monitor (tv) said no signal and my small LG monitor was black so I just assumed it was part of the process. After about 6 to 7 hours of waiting it still remained the same, even after restarting and trying many other methods to get it to work nothing happens and also it now keeps beeping every 10 to 15 seconds trying to connect my keyboard and mouse, after the beep the mouse and keyboard turn on (the lights on them go on) then after 3 seconds or so they turn off and it does this non stop, also my graphics card is a Radeon 7700 if that has anything to do with it.
View 9 Replies
View Related
Jan 22, 2013
Here's How:
View 1 Replies
View Related
May 6, 2013
My laptop went lagging while i was using it, so i restarted my laptop. After that, my laptop went into a mode that i have never experienced before. I clicked advanced setting, It made me choose either to restore it, reset it, and another one but i can't remember it. I chose the reset button, and currently it is stuck on RESET YOU PC. And its taking a very long time. I don't have my recovery disc or drive. I saved it before on a flash drive, unfortunately it died.
View 9 Replies
View Related
Feb 18, 2013
I was messing around with the metro UI and was trying to organise it. Turns out i liked it the way it was when you first install windows 8. How do i get JUST the metro UI back to defult?
View 9 Replies
View Related
Nov 27, 2013
I click on remove everything and reinstall windows, it goes to the logo saying restarting/preparing but the after that it goes to a black screen and stay there forever. I really need to reset my laptop. Its been running really slow lately.
View 1 Replies
View Related
Sep 30, 2014
I have recently built my own pc.
Operating system is windows 8.1
motherboard is ASROCK FM2A58M-HD+
500 gb hard drive and 4 gb Ram
For about the last week or so my Norton 360 has been picking up a threat, every time I turn my pc on. I thought Norton was getting rid of It so I didn't pay to much attention until my media player kept playing up and certain programs wouldn't load or take a long time, so I did some research and it turned out to be a trojen. anyway I have tried to put my pc into safe mode and have restarted my pc. my operating system wont load back up.
I have a red screen with a power button that gives me the option to restart or shut down. and there is a ease of access button. I have tried repairing with the original disk but it say my hard drive is locked. and it wont let me reinstall it either.
View 5 Replies
View Related
Mar 12, 2014
Due to malware issue (snap.do) i want to refresh or reset my windows 8 (updated to 8.1). but on restart it gives the following error
The application or operating system couldn't be loaded because a required file is missing or contains error.
File:Windowssystem32winload.efi
Error code: 0xc000000f
I dont have any recovery media (disc or recovery drive).
View 1 Replies
View Related
