Always Fails To Clone / Copy Old Hard Disk With Bad Sector
Aug 22, 2014
It always fails to Clone/copy my current hard that has bad sectors, to a new hard disk. My present HDD is a 320GB and its health is really bad. I bought a new 500 hard disk and tried to clone and copy the whole HDD. I tried Paragon HDD Manager, O&O disk image and other two Software. All of them failed to clone or copy my old hard disk to new one.
What is the best solution. Paragon, copied data partially and gave an error at 80%. I tried few times and the same thing happened
I have attached the Windows 8 hard disk from my broken laptop to my external usb hard disk device and windows 8 say format the disk as it does not recognise the file system how do I get around this.
1 is 55gb kingston ssd where i run my windows 2 is 1tb hitachi where i keep my games and other junk 3 is seagates 250gb laptop hdd.
The main problem was that sometimes when opening or just clicking some folders freezes the file explorer and it crashes after it, so i tought to format the second hdd to make it work better now it seems work ok except for moving files from hdd to another.
When copying the copy speed just at random point drops to 0% and leaves the hdd 3 to hang 100% and the hdd 2 is dropping to 0%. What i have tried:
I ran hdd regenerator and 18 bad sectors were fixed Also tried to change sata ports That's not much but can't figure anythin else for now and i am starting to suspect that my hdd is gone bad :/ also when downloading ~100mb file from internet it makes same thing but i don't know is it same problem...
I have over 600 GB on my HDD from games, media, and files. I bought a 250GB SSD to boot my OS off of and put some selected programs on. Even after deselecting all my media files, there is still too much on my HDD for the included Samsung clone client to proceed. I just want to use my new SSD as a boot drive for the OS and for several programs while retaining all my other files on my existing HDD.
I know there is good software out there to clone/image my hard drive and restore it to a new SSD drive. I'm just wondering though, since my laptop is brand new, I made a full recovery to a USB drive and included the OEM recovery partition.
Couldn't I just swap out the old HDD with the new SSD and boot with the recovery stick and do a full recovery back to the new SSD?
Also, however I do this, recover or image backup/restore, do I need to do some type of SSD alignment? I can't find a clear answer on that.
My hard disk crashed. I have a recovery cd created on the time of purchase. I bought a new hard disk for this purpose. Now when I am trying to recover from the same cd it is getting stuck at 40 % showing error. I searched for this error and got something as such recovery disk can work on OEM hd. As my old hd has crashed how can I recover over there. Is there any system that dell provide me with necessary operating system so that atleast I can use my system.
I am running Windows 8.1 and it appears that my hard drive needs to be replaced. When the machine is turned on, frequently there is a slight screech and I feel it's best to replace the hard drive.
How do I make an exact bootable copy of the hard drive on a new hard drive and simply replace the drive with the new drive without having to reinstall Windows 8.1 or other programs and without affecting any of the files currently on the machine? If cloning software is required, are there any free programs I can download?
Brand new laptop. HP. 17e UEFI +GPT etc. Upgraded to 8.1 from 8, first thing. Then clicked on the MS, create recovery. (in blind hope of a clean 8.1 restore). Inserted (32gb stick) (later found out is illegal windows 8 version, that is not removable.) SD-extreme, 32gb. list on toms HW, as winner of all, (and is useless for this app).
So I pull out my very old SD cruiser glide, 32gb (old , slow and not win 8 cert (a good thing). Yes all 32gb extremes are mapped as HDD not removable media and is doomed. (known on all forums) but same error.
The cruiser shows up i device manager under removable media....btw i want to find out why the missing files error. I have a HDD and SSD, with latter mirrored. both the orig, HDD fails and SSD fails. same way. I parked the HDD , and run only SSD. but both fail... (my guess is , upgrades 8.0 to windows 8.1 is cause).
now the screen, attached
How can i find the log of these errors, it's not in event viewer.. oddly. sfc/ scannow works. as does chkdsk, and restore (create) works,. and system is Fast a lightning. All HP apps works, cept there version of create disk for same reasons.
My HP create recovery now works on the GLIDE. (old very old 32gb stick i had laying about). So now I am thinking HP? blocks the MS create so you will use theirs? But I'd lilke to know this, what files are missing....
A friend's Samsung laptop would no longer boot, and startup repair would run and failed several times.
We planned to restore it to factory original, but wanted to boot to a Linux disk to copy his files first. In order to allow that, we went into Setup and disabled Fast Bios mode, disabled Secure Boot, and changed the OS mode from UEFI to CSM. We booted the Linux disk, copied his files, then reset all the Setup settings back. But now the computer will not boot at all, it shows the Samsung logo screen, then shuts itself off. We reset Setup to Optimized Defaults, made no change.
There does not seem to be any hardware failure since I can still boot to the Linux disk and see the hard drive if I make all the same changes that we made the first time around in Setup.
I have an ASUS RT-AC68U router with 9 DBI dual band antennas. I need a program that allows me to copy and paste files to the external hard drives which are connected to the router's USB ports. An example of the application I am seeking is called "Silex Virtual Link", I need one like this, I used to use this 1 on my old D-Link DIR-825 router but it is not working with my new ASUS router and ASUS tech support couldn't solve anything.
Anyway, I'm curious about making file shortcuts between hard disk. Example, real folder is in D: drive. I want to make a shortcut for that particular folder in E: drive. Is this possible?
I got a new Toshiba Satellite L50-B notebook with Windows 8.1 64-bit installed. As I need to go a special place, I passed the notebook to a IT guy and have the whole disk encrypted using DiskCryptor. The guy told me that he cannot boot the OS, even he entered the correct password. And one more nice thing. The guy did NOT make recovery discs first!
Since the hard disk is encrypted I cannot boot it. Also I cannot do a system recovery. I booted the notebook into Linux and copied all the content in the recovery partition to a USB drive.
Now, I would like to know if I can get my machine up and running again. I don't mind all my content will be lost as it is a new machine.
How to make a set of custom recovery disc out of the content in the recovery partition? Do I need to format my hard disk in UEFI mode? if so, how?
I ahad updatedmy wife's laptop acer spire 5740 G from windows 7 to 8 and then updated to 8.1. She did not like os and asked me to revert back to 7. After running setup I formated the drivve C containing windows 8. But now computer doesnt boot and I tried to reinstall teh system but I cant see my hard disk- Setup runs till where do you want to install your OS and then I cant find my hard disk
I have put a 120Gb Intel SSD in my laptop, done a fresh install of Windows 8 from the supplied recovery DVD's. Then upgraded to Windows 8.1 through the Windows store, installed Photoshop 7 and Kingsoft Office and a couple of very small other programs. Everything is working fine. Great. I have hardly any docs music etc on this machine (they are all on my server).
I checked my hard drive usage and discover that I have used 75.3Gb and only have 31.2Gb left. C: partition is 106Gb. I know that the recovery DVD's created restore partitions and they can be seen in disk management. No worries there, they are only a few Gb and make up the total usable disk space (120Gb or so)
So I have been looking for where the bloat is. I have enabled viewing hidden files, and added up all the folders sizes on the root of C: It comes to 44Gb. It doesn't add up to anywhere near the total that I am being told is used 75Gb. So what is using the additional 31Gb or so? and how do I find it?
I have attached a screenshot showing properties of "all in c:/" and properties of "Local Disk C"
My hard disk was always full (itunes/picasa filling it with multiple backups etc); so decided to upgrade to a whopping 1tb. I bought the HDD and a cradle; and have created a clone of all my files and settings onto the new monster using an application. I want to copy all my settings across - Virtual DJ takes best part of a day to configure for example.
Downside is, the new disk is not bootable; and I cannot make it bootable however I try.
I have made the partition active using "diskmanger"
I have gone to the drive and typed in admin mode in command prompt:
g: cd/boot bootsect g:
I have also tried:
Bcdedit /import C:BootBCD.
This hasn't worked, so tried this:
Bcdedit /set {bootmgr} device partition=G:
TBH - don't really understand the commends, just trying everything I can!
i have the same problem, it gives me the same error, "Windows cannot be installed to this hard disk space. The partition contains one or more dynamic volumes that are not supported for installation."
I tried to make partitions on my hard disk and then tried to reboot the system, but it fails to reboot, error 0xc0000225 (winloader) on blue screen. BIOS sees the harddisk. I can also load the recovery program (hp), but it provides me only 1 option - to make system recovery to factory settings and losing all I have on my hard disk. Can it be somehow possible to recover win 8 and start it without factory settings recovery and losing files?
I use a gmail POP account to get my emails from my ip.
I want to be able to save an email to my local hard drive as txt or htm
When I tell EI 11 to Save as.. .txt, the file is unreadable.
When I save it as an htm and open it I'm sent to the gmail login but gmail seem to hang for a long time at login. I don't get to the inbox at all and need to close IE. How to save web mail to my hard drive?
First of all.. let me say that this HDD does not have any kind physical damage. It has not been dropped.. nor it has a clicking or beeping sound.
The HDD is SeaGate FreeAgent Go 250 GB. I always watch movies in bulk. So I copy it to my HDD and plug it in the TV and use it. Today when I plugged it in to my PC for watching another set of movies, the copying was not going in a stable manner.. instead the graph showed mountain-like copying.. i.e. first it goes at much speed and then it loses and fall back to 1 or 2 mb/s.. So I thought that a defrag could set things right.
I defragged it and went for a coffee.. After coming back, the defrag was complete but i was unable to open the HDD.. I safely removed it but it said it was in use.. I shut down my PC and unplugged it.. turned on my PC but when I insert my HDD its unreadable.. it shows no percentage of free space.. only just Local Disk F.. ( earlier it used to show FreeAgent GO) I ran chkdsk F: /f /r.. but it showed some error.. I closed it. The log file is attached..
Now whenever I open my HDD, its stops responding.. I know it can be solved..
I have installed a fresh copy of Windows 8.1 Professional recently (about a month ago). It's running fine mostly but there is one thing that keeps irritating me, whenever I leave my PC idle for long (like half hour or so), the system start to do something in background with hard drive light constantly lit.
This keeps going on until I come back and start doing something or it randomly stops doing it. This also happens during work too but rarely. I have heard that file indexing and windows update are possible culprits behind this issue and turned them off but it is still happening. I don't know what's wrong with this OS, it never happened with Windows 7 before.
I mostly use my system for gaming (Steam) and have no antivirus installed beside Windows Defender, in addition to that there is no 3rd party de-fragment program installed. When this happens during games it makes game performance sluggish which is the major cause of annoyance for me.
I have an HP Pavilion TouchSmart with windows 8. Model number 14-b109wm. Yesterday my laptop was working perfectly. This morning when I tried to turn it on I got a message saying, "Boot device not found. Please install an operating system on your hard disk." I clicked F2 for system diagnostics and ran two tests for the hard drive. The "quick test" said "passed." So I ran the "extensive" test and it said "not installed." I dont know what any of this means or how to fix it. I called HP and the lady barely spoke english. She said the hard drive needs to be re-seated. Again, dont know what that means. The F8 and F12 keys dont work either.
How to Migrate OS to new Hard disk of the same or different size.
For this example, I am using a 500gb HDD moving a 250gb HDD.
Windows 8, uEFI, GPT & Secure Boot.
Using Paragon 12.
1) Download Paragon 12 from here: PARAGON Software Group - partition manager, drive backup, hard disk partitioning Free try link: Paragon Backup & Recovery Home 2) Install your New HDD to a USB Dvice. 3) Install & Open Paragon B&R 12. 4) Click on Hard Drive Migration. 5) Click Next. 6) Click Next. 7) Click Next. 8) Click Next. 9) Click Next. 9) Click Yes & Next. 10) Click Finish. 11) Remove old HDD & replace with New HDD.
All Done.
Moving pre-installed Windows 8 from HDD to SSD Originally Posted by Epoch IT WORKED! So I know you posted this awhile ago, but I hadn't tried it because I could only find the paid version. After you posted this link I found the free trial version. I installed the program, went to Disk Migration, automated everything, took out the HDD, put in the SSD, and it boot in less than 5 seconds, perfectly.
Wow! There is a solution.
SSD Originally Posted by diesele This app checks alignment Download AS SSD benchmark 1.7.4739 - Technical Details - [URL]...
Hover the mouse in the top left box and it will indicate alignment or not.
Getting almost 500Mbps read and 400Mbps best write on the SSD :-) As Paragon have updated for Windows 8.1, you will need Paragon 14.
the hard disk of a Samsung Ultra 5 crashed. I have got a new hard disk. How do i restore windows 8 and Samsung drivers to the new hard disk? My friend has an exact notebook. How do i copy the recovery partition from his pc and use it on mine?
I was wondering what you'd recommend for the following:
I want a program that synchronizes my files with my external hard drive.
The client I use right now, Memeo Instant Backup, is decent, but has the following issues:
1. Takes a lot of resources to run 2. Is extremely slow 3. Doesn't mirror deleting files on my hard drive, keeps them on my external and causes it to get full
Is there a program I can use that just literally copies my user folder onto an external drive, and as I delete/move files on my hard drive, its mirrored on the external hard drive?
I have a Western Digital external hard drive. Model WD5000C032 500GB. It's an older device that was working just fine on my Mac (I don't know what OS it was running and do not have access to it any longer). I have brought this HD with me and am now trying to use it on my Windows 8.1 lap top. When I plug it in, the device is not assigned a letter. I can search for it in disk management, but it is uninitialized. I have right clicked on the drive to initialize, and receive an error message "the specific disk is not convertible because the size is less than the minimum size required for GPT disks." I searched and suggestion is downloading and using Partition Wizard. I downloaded the program and opened the wizard, but it does not see my hard drive. The screen shot will display as far as I've gotten.
my WESTERN DIGITAL hard disk was running smoothly and i can access all datas.....but today 1 disconnected it and there after it is not showing on "my computer"...
bt d indicator light is on and it is rotatng insise......but cant access it ....
