Windows 8.1 Can't Access NTFS Partitions
Dec 18, 2013
Suddenly Win 8.1 (on partition F) can't read anymore my other partions on the same drive, also it coudn't read my external USB drive.
When clicking on the partitions c: or d: it says 'cannot access local device' and 'device not ready'.
I have a dual boot system with Windows 7 and 8.1. I can boot into Windows 7 and read all partitions. I also checked the MBR which looks fine. I also have controlled in Computer Management that all drives have a letter assigned.
However Windows 8.1 can read my USB drives and the installation DVD of Windows 8.
Clicking on properties of e.g. drive c: there is of course no security tab, so it shouldn't be a question of permissions. Also no error codes in event log.
Booting in safe mode does still does not solve the problem. Of course Windows 8.1 can read perfectly its partition where it has been installed.
I know, a repair or refresh might be the solution, but if possible I want to avoid it.
Checked also with my different antivirus and spyware programs. All comes clean.
View 6 Replies
ADVERTISEMENT
Oct 30, 2012
I purchased a new SSD drive for running windows 8, while installing I unplugged all of my other drives in my machine including a WD 2TB drive I use for files. I cannot seem to get the Windows 8 installation to be able to access the drive when I select it it says "F: is not accessible. Access is denied" after following the instructions below. The drive is recognized by the machine still, I just cannot access it from this Windows 8 partition?
"Access Denied" or other errors when accessing or working with files and folders in Windows
Long press the folder you want to take ownership of, then tap Properties.(If you are using a mouse, right click the folder, then click Properties.)Tap or click the Security tab, tap or click Advanced, then tap or click Change.Tap or click Edit. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.Type the name of the person you want to give ownership to and click Check Names.The person that you're giving ownership will have their account displayed in the box, click OK.If you want that person to be the owner of files and subfolders in this folder, select the Replace owner on subcontainers and objects check box.Click OK.
View 3 Replies
View Related
Jan 19, 2014
I've had my Sony Laptop for under a year now, and it was working alright (with the occasional problem such as BSODs), but today after having hibernated the computer (never shutting down/restarting) for a month (because I went on holiday), I finally was forced to shut down by Windows update. However, when I booted up again, it signed me into a temporary user account. This had happened to me before, so I didn't think much of it, I tried to do a system restore, but came up with the error: 0x80070005. I tried different restore points, but they all yielded the same results.
Then I tried doing an sfc /scannow, which said nothing was wrong. I also scheduled a chkdsk /f/r for boot. Unfortunately it got stuck on 28% for over an hour. So I turned the computer off. When I turned it back on, I was unable to sign in: "The user profile service failed the sign in user profile cannot be loaded". So I restarted the computer. This is where it got really bad.
As soon as the computer boots up, it shows the loading signal then instantly goes to the Windows 8 BSOD saying that there was a problem with NTFS File System.
Now each time I boot up, it does the exact same thing. What do I do?? I haven't had this laptop for long. The laptop is still under warranty, am I able to get it fixed under warranty.
View 3 Replies
View Related
Feb 8, 2014
I have linux install and I want to install windows 8.1 but it says I need ntfs to install it, what do I do ?
View 6 Replies
View Related
Jun 26, 2014
I am just built a new pc and installed and updated all drivers properly. But it keeps crushing and most common bsod is "Ntfs_File_System" and "Service_Exception_Not_Handled". I searched almost all of similar forum post and i still get bsod's. İ have tried to run Memtest86 and it couldnt find any error in rams. Sometimes data corruption occured in my several files and i have ran HD TUNE to find any bad sector but it was ok too. I have done all i can and it still crushes 2-3 times a day.
About system:
Windows 8.1
Asus p9x79 motherboard
Asus Gtx770 o.c. graphic card
Intel i7 4820k processor
I couldn't attach my minidump files so i have uploaded them: [URL] ....
View 2 Replies
View Related
Jan 25, 2014
Any decent free/low-cost software package for recovering data from an NTFS partition? My Windows 8 has gone down and I suspect the file system has become corrupted.
View 5 Replies
View Related
Nov 22, 2012
With UEFI BIOS,Windows 8 make my data HDD to RAM file systems during partitioning HDD and WIN 8 cannot recognize it after finishing Windows 8 installation and log in.
Is That Windows 8 bug or AMI UEFI BIOS's bug.
If the RAW is GPT's file systems format. The system HDD why is NTFS not RAW.
View 7 Replies
View Related
May 13, 2013
(Or how to remove Write Protection from Pendrive). Pendrive doesn't have any write protection lock key on it.
View 1 Replies
View Related
Mar 18, 2013
I have been having problems on my primary hdd, and after doing a full hdd scan, I found that I had some bad sectors, which caused some windows hangs, problems, and some bad file reads.
After googling for programs to recover and fix those bad sectors, I have found HDD Regenerator, which did a wonderful job, on fixing and recovering all my bad sector by using a patented algorithm to magnetize again those bad sectors on my hdd.
But after that, I still have marked on my ntfs partition those bad sectors, even tough they are ok now, how to I reset the bad sectors on my partition, to mark them as good to use, Without losing the contents of my hdd?
View 9 Replies
View Related
Oct 29, 2013
How to convert an old FAT32 NAS drive to NTFS without losing the data on it?
convert z: /fs:ntfs gives error message cannot convert network drive.
View 4 Replies
View Related
Sep 15, 2014
OK, so I made a backup DVD of some OS related programs for my computers onto a DVD, but when I attempted to MOUNT the image from the disk to Win 8.1's included virtual drive, I get an error that the Disc Image is not formatted for NTFS file system, and cannot be mounted.
I can copy the files from the disc to a location on the desktop and execute the files from there, but it's a royal pain in the neck to do this every time.
(Yes, I understand, I probably will need to build a new image and burn it to a new DVD, but I want to make it one that I can run the disc from my optical drive and it will work!).
USB is volatile storage, and can be erased. I prefer hardcopy backups for this reason.
View 1 Replies
View Related
Jan 3, 2014
It is a 64 GB Toshiba USB drive (TNU). Problem is that every time I try to format to NTFS the normal way with Windows 7 or Windows 8 I get the message: Windows was unable to complete the format.
I tried to format it using the specific software from the drive manufacturer, TNA.
A friend managed to format it to FAT32, but the next time I tried to access the drive Windows showed a message saying that I needed to format the drive to use it. Then there appeared only the exFAT option.
I also tried some partition software, like AOMEI Partition Assistant Standard Edition, and it could format to both FAT32 and NTFS, but when I removed and put the USB drive back Windows again warned me about the need to format and again I had only the exFAT option left.
View 9 Replies
View Related
Jul 17, 2014
i'm using Windows 8 Home 64 Bit.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
View 9 Replies
View Related
Aug 19, 2013
So recently my windows 7's some system files got corrupt . won't start after windows logo (when the arrow shows up=>always bsod, even in safemode). so I decided to format C and install fresh windows 8.
Then I had four partitions C:windows(7) D:Softwares E:Games F:Mix Stuff.
My plan was to format C (of course for windows 8) and D (as C had only 20Gb space so I thought I would also format D 46Gb and give C 45Gb and D 20-21Gb as it was useless to me and contained only a bunch of crappy softwares ). Well, it FAILED here's how. after formatting C and D I deleted them thinking that boths unallocated space will merge. but it DID'NT.
After deleting I tried creating new partition on D but it FAILED "we cannot create create new partition" . Then I did same thing with C and it WORKED. I had to give it again 20Gb (maximum) - NO CHOICE. Then I installed Windows 8 on C. (thinking I will later format D on desktop)
Now here's the scenario : I DO NOT WANT TO FORMAT E: AND F: AS IT CONTAINS MY PRECIOUS DATA. After the startup config, 'Startup' came up I went to Desktop then Computer and then what????
WHERE THE HELL ARE OTHER PARTITIONS????????
Only C: I found there 7.67Gb free of 19.5GB.
Where are others gone .
I went to disk management and saw only (C:) other 138Gb (something) was unallocated space. Then I booted my pc from windows installation usb and on the drive screen I saw C 19.5-20Gb and Unallocated space 138Gb.
View 9 Replies
View Related
Aug 18, 2013
recently my windows 7's some system files got corrupt . won't start after windows logo (when the arrow shows up=>always bsod, even in safemode). so I decided to format C and install fresh windows 8.
.
Then I had four partitions
C:windows(7)
D:Softwares
E:Games
F:Mix Stuff.
My plan was to format C (of course for windows 8) and D (as C had only 20Gb space so I thought I would also format D 46Gb and give C 45Gb and D 20-21Gb as it was useless to me and contained only a bunch of crappy softwares ). Well, it FAILED here's how. after formatting C and D I deleted them thinking that boths unallocated space will merge. but it DID'NT. After deleting I tried creating new partition on D but it FAILED "we cannot create create new partition" (search google 'cause others also sometimes have this ****** error many times). Then I did same thing with C and it WORKED. I had to give it again 20Gb (maximum) - NO CHOICE. Then I installed Windows 8 on C. (thinking I will later format D on desktop)
.
Now here's the scenario : I DO NOT WANT TO FORMAT E: AND F: AS IT CONTAINS MY PRECIOUS DATA.
After the startup config, 'Startup' came up I went to Desktop then Computer and then wow what?
Only C: I found there 7.67Gb free of 19.5GB. Where are others gone .
UPDATE :. I went to disk management and saw only (C:) other 138Gb (something) was unallocated space .Then just for checking I booted my pc from windows installation usb and on the drive screen I saw C 19.5-20Gb and same Unallocated space 138Gb.
View 13 Replies
View Related
Jul 1, 2013
how to combine two partitions in windows 8..
First Of all You Need To Open Control Panel Then Go to System Security-Administrative Tools Then Computer Management
In Second Step You need To Open Storage And Then Disk Management
In Third Step . Now you need a partition which will be added to the targeted one (E: drive will be added to D:). The drive which will be added to another, should be back-up before this major change on disk partitions.
So be Sure that You Done Backup Files Then Delete the Partition Then After Getting a Free Space Partition,Move To partition (D Drive) Which Will Be Extended and right-click on it. Select the Extend Volume and go Next.
Select Next From the Bottom Side And Then It will take a Few Minutes To Merge Two partition Into Single Drive.
View 9 Replies
View Related
Oct 18, 2013
I run 3 HDS. 1 SSD, and 2 normal drives.
I just clean formatted my SSD and installed Windows 8 on it, which I always put on that drive.
However I am seeing a bunch of partitions, 4 recovery partitions. Are these normal? If not, how would I get rid of them?
View 4 Replies
View Related
Aug 3, 2013
I have 2 partitions: System Reserved (100mb) and Windows 8 (465gb). Windows 8 is marked as the system partition while system reserved is marked as Active & Boot. Is there any way I can like split windows 8, copy the files onto the new bit of unallocated space and make that partition the system partition instead of the "old" windows 8 partition?
View 1 Replies
View Related
Jun 17, 2014
I installed Windows 8.1 on two computers but got different partitioning on the SSDs...I would like to know which is the best/correct one, and should I tweak the one thats not setup properly?
DESKTOP--> 240SSD
Disk Management shows:
C: 214.25GB NTFS Healthy (Boot, Page File, Crash Dump, Primary Partition)18.63GB Unallocated
LAPTOP--> 120SSD
Disk Management shows:
300MB Healthy (Recovery Partition)100MB Healthy (EFI System Partition)C: 118.73GB Healthy (Boot, Page File, Crash Dump, Primary Partition)
NOTE: I dont know if this is related but for the laptop (the one with the most partitions), I performed a Reset Windows 8.1 to fix a few things.
View 9 Replies
View Related
Oct 8, 2013
I am using the guide to install Windows 8 over two partitions and I get the error:
Windows cannot be installed to this hard disk space. The partition contains one or more dynamic volumes that are not supported for installation. I followed all the steps 100%
Found this Get the paid version of EaseUS Partition Master at discount. Magic Partition Manager Freeware for PC/Server users. Upgrade EaseUS Partition Master Free can I use this to copy partitions?
Worked it all out, the software linked above was able to convert my Dynamic drive to a Basic drive for free!
View 2 Replies
View Related
May 27, 2014
I was playing an online game when suddenly I've got a runtime error which froze the screen. I had to push the power button and my laptop restarted, slowly than usually but otherwise O.K. However, when I tried to do the maintenance using the Optimize tool this is what I see now:
The "volumes" (for the lack of a better word) Push Button Reset and ?Volume{9789f0... that have never been showing before are showing now and when I try to force a manual optimization the window just blinks but doesn't do anything. I've had the optimization set to "weekly" but after that I and it changed to "daily" for at least 3 days now but this didn't solve the problem. Highlighting and right-clicking doesn't work.
View 7 Replies
View Related
Jul 19, 2014
I am currently attempting to dualboot 7 onto my 8 computer. I made my partition got everything ready, and realized... i have way tomany partitions? What do i dackup what do i keep? ...
Currently i have Windows 8 / (blank)win7 / lenovo app / recovery. And 5 other ones!? Are they important? Do i need them? How do i find out?
View 9 Replies
View Related
May 22, 2014
I have a notebook with windows 8 OEM. In the past I have experimented with dual-booting other OSs, then deleting them and now I have a few extra partitions in my drive. I was wondering if this community could tell me what partitions are safe to merge to my "working" volume (C: or E: ). I have some screenshots of Disk Management and Disk Internals Linux Reader windows. I think there's a better way of showing You the contents of my volumes, but I don't know what program to use.
q8yepU0.png
jwI5iAD.png
I also have a few questions: Is my windows 8 OEM inside my hard drive? For example, if I format my whole hard disk completely, would I lose the OEM?
Can I replace my windows 8 OEM with windows 8.1 OEM or even with custom windows 8.1 OEM (for example: fully updated one, if it's possible)?
View 5 Replies
View Related
Dec 13, 2013
All my partitions got wiped out and it seems as if I have no existing installation of Windows 8 on my laptop anymore.
How can I reinstall my Windows. Finally, where is the product key for the Windows 8 written?
View 4 Replies
View Related
Aug 6, 2013
I have an pre-installed Windows 8 in my notebook. When I first got the PC, I got only C:/ partition so I needed D:/ and for doing this I used EaseUS Partition Manager. This is just a guess but I guess Windows can't find those recover partitions that are in my HDD. I haven't deleted those partitions just created D:/ and here is a screenshot I just take to show you the partitions I have.
I have already tried copying the Install.wim from my BIOS_RVY partition which was about 9GB and I moved it to C:/WinRec and used this command as I saw it from internet : reagentc.exe /setosimage /path C:WinRec /target c:Windows /Index 1 But i still get the error:
"Insert media some files are missing. Your Windows installation or recovery medial will provide these files."
This method didn't worked so any other too. I wonder how can I refresh or some sort of return my notebook to the factory settings from the recovery parts I have.
View 9 Replies
View Related
Jan 27, 2014
I recently decided to buy an ultrabook and I got me this one: LG Z360-7416, with a ssd and windows 8 (x64). As usual, it came with a lot of garbage installed which was using almost half of the ssd storage (128GB), so I decided to do a clean install. I got me a msdnaa copy of the windows 8.1 pro (x64). So, i used a pendrive to boot up on UEFI mode and selected custom install and when i get to the select partition, it shows everything fine, i select a partition and when a click on install, it returns an error saying it cannot install on my partition (i dont remember exactly what it says), and when i click on refresh, all my partitions vanishes, even going into the prompt and using diskpart doesnt show my partitions anymore. I tried to load some drivers, but it didnt work.
I was only able to install windows 7(x64), where nothing of these things happens, it installs realy easy. I tried to install windows 8 from windows 7, like an upgrade, but after it restarts, it gets stuck also. My disk is formatted on GPT, as im using EUFI on my windows 7 installation.
Tried almost a hundred times using all solutions i found online, but always the same result. And to get even more weird, some rare times it gets to the installation part, where it says the progress, but stays on 0% of unpacking files...
Its seens to be missing some especific driver to windows 8 be able to work with my ssd, but i cant get it right, but if it came installed with windows 8, it must be a way to make then work together.
Unfortunately i deleted the recovery partitions, so im stuck on windows 7.
View 1 Replies
View Related
Apr 29, 2014
I have a Dell XPS-12 laptop. It's pretty standard, and I only use it for school. I'm a Computer Science major (which is incredibly ironic in this situation... wow), and I partitioned part of my harddrive off, about 32 GB, for a CentOS and then Kali Linux install, first to run a configuration and write some custom code for an open source captive portal my work has deployed and second for testing my place of employments security implementation (boy was it easy to gather some scary data with a simple wireshark capture..). I am extremely busy with being a fulltime student and also working 2 jobs and freelancing web development, and I haven't been able to figure out why after reformatting the partition I was using for the Linux installs, I could never reintegrate that partition into my own Windows partition. It's incredibly annoying as I only have a 128 GB SSD and after screwing with it for ten minutes, said screw it and just made it into a backup drive where I keep all my code and larger ISO images for different OS' I have (after just a year of studying CS, I've had to use a total of 6 different Linux OS', as well as messing with trying to get an ArchLinux install up and running correctly... I'm starting to feel like a collector)
why my harddrive is being super lame and finish that matrix for the Software Packaging class' final it's pretty obvious which I'm going to go with. Problem is, now, I'm starting to do a bit of freelance security consulting here and there, and I need to have a portable Kali partition with me. I also need to shrink the partition, but when I do I can never put it back into my main Windows partition so there really is no point.
Also, I'm running windows 8.0 right now, but I've had 8.1 before and the fixes still didn't work.
View 1 Replies
View Related
Feb 27, 2013
My Dell XPS One 2710 was delivered with Windows 8 with wrong language. Dell therefore sent me a Windows 8 MUI Recovery Media-DVD, and told me to follow the instructions on this link: [URL] .....
At the first installation attempt I got to a point where a pop up asked for drivers. I didn't know which drivers, and I thought everything was included on the DVD (but even the DVD-ROM wasn't recognized, only "Boot (X:)"). I read a tip in the Dell forum to change the boot setup to legacy. So I did and I got a few steps further to the point where you shall choose the partition(s) under the custom menu. But no partitions were found. Perhaps the reason was the 32 GB mSATA with Intel rapid storage technology.
So I did exactly the following:
1. I downloaded the newest version of the IRST-driver and extracted the files to a USB device.
2. I booted from the recovery DVD (UEFI, safety mode: ON).
3. When it asked for the driver I installed the IRST-driver from the USB device (AHCI, 64 bit, located in the driver-folder - the only words I recognized from the forums... 0:).
4. A total of six partitions were shown: Partition 1 ("ESP", System), partition 2 ("DIAGS", OEM (reserved)), partition 3 (MSR (reserved)), partition 4 ("WINRETOOLS", recovery), partition 5 ("OS", primary), and partition 6 ("PBR Image", recovery).
5. I followed the instructions in the link (above) and deleted all of the partitions.
6. I installed Windows 8 on the new partition, without further complications.
7. I ran Windows Update.
8. I installed the Dell drivers for this service tag, in the order specified by Dell, starting with chipset, card reader, IRST, audio, video, network and everything else, and with a reboot between every single driver installation. The system, including the IRST, seems to work fine so far (no exclamation marks in the Device Manager).
9. I replaced some of the software, including Dell Backup and Recovery.
I started Dell Backup and Recovery and the program initially told me that it couldn't find a recovery partition, and therefore couldn't backup the system. Other programs in the Control Panel, like File History and Storage Spaces, can't find available drives.
The Disk Management tells me the following about my 1 TB HDD:
EFI System Partition 100 MB - Recovery Partition 898 MB - Primary partition (NTFS, boot, page file, crash dump) 930.11 MB - Recovery OEM partiton 300 MB - Recovery OEM partiton NTFS 300 MB
So finally to my questions: Should I have kept one or more of the recovery partitions during the Windows 8 installation? Could this affect Windows' System Restore (I guess not since Windows creates its own recovery partitions)?
And finally: Is Dell Backup and Recovery any useful? I already have the recovery DVD in case I need a factory reset. For backup purposes I will use a cloud service, and maybe a NAS in the future. Do I even need a recovery partition?
View 4 Replies
View Related
Jan 8, 2014
I installed Windows 8/8.1 on a system with a Gigabyte GA-Z77X-UD5H MB. When I look at the SSD where Windows is installed I have one partition. I also installed Windows 8/8.1 on an ASRock Z77 OC Formula MB. When I look at the SSD where Windows is installed I have three partitions - 300MB (Recovery Partition), 100MB (EFI System Partition) and 111.27GB (Boot,....Partition). Why did the Windows 8 installer create three partitions on the ASRock system? I think I understand the EFI partition since the ASRock BIOS has a "Load UEFI Defaults" option. The Gigabyte MB does not have this option in the BIOS? Is that because the ASRock MB has truly implemented EFI and uses the EFI System Partition to store boot information?
Why was the Recovery Partition created? I built this system from scratch so there is not any third party involvement. If I reinstall Windows 8 using a new - never used SSD will I get the three partitions? If I format the SSD with one partition prior to Installing Windows 8 what will I get?
I not concerned about the loss of 300MB,why I got different partition configurations on fresh installs of Windows 8 on two different MB's/Systems?
View 9 Replies
View Related
Jan 6, 2013
I have Windows 8,W7,Wxp working well in multiboot. But i have Windows 8 instaled in C:but it is the 2nd partition.How can i move it to first partition ?W7 and wxp are probably on the 1st D: partition.
View 2 Replies
View Related
Apr 26, 2014
On my Desktop I have one 240GB HD (C:) with XP Home installed and various other programs. I also have 2 other IDE HD of 80GB (D:) and 40GB (E:) which I use to store my backups and other Utilities. I plan to buy Windows 8.1 and install it on this Desktop but I wonder which will be the best option. I would also like if possible to be able to dual boot between the OSs
One is to make an image of the XP Home and then re install it on the 80GB hard disk, then install the 8.1 on the SATA HD. Here I don't know when I install XP on the D: hard disk if the new image will make the changes to all programs from the C: to D:
The other option is to use GPARTED LiveCD and shrink the SATA hard disk to allow me to make 2 partitions. Here I don't know if it is a good idea to have two OS on the same HD but on different partitions.What is your opinion on the above and perhaps there are other better ways?
View 4 Replies
View Related
