Hardware Drivers :: Format ExFAT USB Flash Drive To NTFS / FAT32?
Jan 3, 2014
It is a 64 GB Toshiba USB drive (TNU). Problem is that every time I try to format to NTFS the normal way with Windows 7 or Windows 8 I get the message: Windows was unable to complete the format.
I tried to format it using the specific software from the drive manufacturer, TNA.
A friend managed to format it to FAT32, but the next time I tried to access the drive Windows showed a message saying that I needed to format the drive to use it. Then there appeared only the exFAT option.
I also tried some partition software, like AOMEI Partition Assistant Standard Edition, and it could format to both FAT32 and NTFS, but when I removed and put the USB drive back Windows again warned me about the need to format and again I had only the exFAT option left.
View 9 Replies
ADVERTISEMENT
Oct 29, 2013
How to convert an old FAT32 NAS drive to NTFS without losing the data on it?
convert z: /fs:ntfs gives error message cannot convert network drive.
View 4 Replies
View Related
Sep 15, 2014
I have this external hard disk of 500Gb of Verbatim. Previously it was of NTFS format. Then I had converted it into Fat32 because I wanted to write stuff on it from MAC. I transferred movies, pictures, videos, songs, etc in it.
Now, I use Windows 8.1. I connect this hard disk. I hear the sound of it getting connected. But then I can't access the hard disk. As in my laptop doesn't read the hard disk. I read a few posts regarding converting a hard disk from FAT32 to NTFS wiithout losing the files. But I was not sure whether I have the same problem.
I want to transfer all the files in my hard disk to my laptop.
View 9 Replies
View Related
Aug 4, 2014
I am unable to format drive D, It shows an error "Windows was unable to complete the format" even in disk management the format option is not click-able for drive D. I had windows 7 Installed in it, and later I installed windows 8.1 in drive C. right now I am using windows 8.1 and I have also deleted some important system files that were in drive D, so windows 7 is not usable, and I don't want to use it.
View 3 Replies
View Related
Jun 9, 2013
Is there a way I can back up my files from my 2tb WD My Passport External Hard Drive? I have a lot of files on there which I want to back up and convert to NTFS.
View 5 Replies
View Related
Oct 28, 2013
When i power on computer, my usb flash drive isn't recognized right away. I need to re-plug the flash drive every time, when i power on computer, then it's recognized normally.
It's not such a big problem, but I have this usb flash drive always plugged at computer back side.
View 9 Replies
View Related
Jul 15, 2013
When I plug one of my flash drives into my USB port I get this message F:/is not accessible The request could not be performed because of an I/O device error. I tried a few of the methods I found on the Net but nothing worked.
View 2 Replies
View Related
Sep 15, 2014
I have Silicon Power Blaze B20 flash drive, which is not recognized by my desktop PC's both USB 3.0 ports. The flash drive's light blinks when pugged in, but no reaction from PC's side. I have tried to plug cord between flash drive and PC, but no change. It does recognize the device when plugged in any other USB 2.0 port. And the device is being recognized by other computer's both USB 2.0 and USB 3.0 ports, so I assume it is PC's fault, but what it is. My PC's USB 3.0 ports do recognize any other USB 3.0 devices - my external HDD, other USB 3.0 devices but this drive.
View 1 Replies
View Related
Mar 21, 2014
My usb is apparently disk write protected. there is no physical switch on the usb. i can't understand it as it was working perfectly one day & the next it was write protected, it maybe to do with the fact that i formatted with 'wii backup manager' allowing me to put downloaded wii games onto the usb & play it on the wii, but i can't remember if i done this or not.
I googled the question and someone said to run cmd, diskpart, list disk, select disk X, attribute disk clear readonly, clean. it goes on for a few more steps but at this point i get the error message "DiskPart has encountered an error: The request could not be performed because of an I/O Device error. See the system event log for more information"
What can i do. the usb is only around a year old so shouldnt be damaged already.
View 1 Replies
View Related
Dec 30, 2013
When I try to format my flash drive it shows that the drive is Write-Protected. When I tried to remove it through diskpart it said it completed successfully, but when I try to format it again it still didn't work. I also tried removing it using REGEDIT with storage device policies, but that STILL didn't work.
View 3 Replies
View Related
Mar 16, 2014
The issue is finding the file location for my flash drive. My computer only has 3 external USB ports. I have tried all of them, when the flash drive is plugged in somewhere on my computer it should indicate another drive location. I can't find anything....not sure where to look or if I'm looking in the right place. All that shows is c: drive & E: drive. The E: drive is exclusive for the OS system restore (can't be used; not accessible for anything else). The only other is the DVD drive. Nowhere can I find evidence of the flash drive plugged into the USB.
I have all the essential drivers & everything is up to date [I have a task scheduler & Driver updater software installed. All drivers are up to date. This is a new computer, only 2 months old].
I have gone into device manager & checked all the USB & composite serial bus controllers to make sure they are powered on (my computer has an energy saving management thing & it will possibly deactivate the hubs when not in use). According to the power management settings they are not set to "sleep" but all ports are active. I can't figure out why I can't find my drive, nothing is appearing when I have the flash drive plugged in.
View 9 Replies
View Related
Aug 27, 2014
Yet another lovely problem with 8.1. When I plug in my drive, it shows up in with all of my other drives, and when I double click it to open it, the explorer window freezes, and doesn't unfreeze until I unplug the flash drive. I don't know what went wrong. Maybe it is a driver issue? I am positive that the drive is fine, because it works on my laptop, and even works on this computer in a linux virtual machine.
View 9 Replies
View Related
Sep 13, 2013
I regularly work with EFI partitions (Fat32 formatted as per requirements) on my usb drives (for loading Ubuntu, Windows 8 installs, and Win7 installs), and I cannot seem to access any of these drives in Windows 8.
No matter how many times I format the things to Fat32 I can not even access them at all. I get the error message "You don't currently have permission to access this folder, Click Continue to permanently get access to this folder" <Clicks Continue> "You have been denied access to this folder. To gain access to this folder you will need to use the security tab" <Right-Click, Properties, search for non-existent security tab>.
I understand that the security tab does not exist on Fat32 partitions. But how do we access these drives? The only other way I have found is through elevated command prompt run as administrator. (Which is dumb when you think about it because any virus coded for DOS can essentially access your EFI partition essential to your computer's booting into Windows, but you cannot access it to fix it?) Some days I just wonder what people were thinking when they write software. ~Sigh~
I commonly extract ISO images straight onto Fat32 USB when they contain the /efi/boot structure, but I cannot do this without explorer access (Elevated explorer doesn't work either). MS Dos only sometimes works because of the naming rules associated with it and the xcopy command, etc.
To re-create my disaster, format any USB drive as Fat32 using Windows 8 (or plug one in which is already formatted as such) and try to access it. Then try right clicking the drive and look for said 'security' tab.
TO SUM UP:
I cannot read/write/access Fat32 partitions. It is a re-creatable issue.
View 5 Replies
View Related
Mar 24, 2013
Trying to unlock a flash drive which is in write protected mode in Windows 8. There is no protect switch on the side of the drive.
View 1 Replies
View Related
Oct 30, 2012
I purchased a new SSD drive for running windows 8, while installing I unplugged all of my other drives in my machine including a WD 2TB drive I use for files. I cannot seem to get the Windows 8 installation to be able to access the drive when I select it it says "F: is not accessible. Access is denied" after following the instructions below. The drive is recognized by the machine still, I just cannot access it from this Windows 8 partition?
"Access Denied" or other errors when accessing or working with files and folders in Windows
Long press the folder you want to take ownership of, then tap Properties.(If you are using a mouse, right click the folder, then click Properties.)Tap or click the Security tab, tap or click Advanced, then tap or click Change.Tap or click Edit. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.Type the name of the person you want to give ownership to and click Check Names.The person that you're giving ownership will have their account displayed in the box, click OK.If you want that person to be the owner of files and subfolders in this folder, select the Replace owner on subcontainers and objects check box.Click OK.
View 3 Replies
View Related
Dec 3, 2013
My c drive is starting to fill up, so I decided to move and reorganize some "stuff". Everything went fine and I have a full backup on an external 3TB drive. I also have two separate 2 TB external drives and all is fine.
My last task, before moving/deleting all my pictures and videos (30.000 in total) off my c drive, was to format all my other internal drives and/or remove/upgrade them to bigger ones and this is where I ran into a problem.
I have win 8.1 with all service updates as of today. My computer specs are all in my info.
I want to remove the drive G: and replace it with a 2TB one, I deleted everything from the old drive, but when I removed it, I got a boot error.
What I found was, that the hidden files in the picture bellow are still on it and needed to boot.
How can I move these files onto my C: drive?
I found one tip, to use this command: bcdboot c:windows /s c: but it didn't change the fact that the computer doesn't boot without the G: drive attached.
Here is a picture of my drives.
View 9 Replies
View Related
Sep 15, 2014
I purchased a Seagate 1Tb external drive that came with "Seagate Dashboard" software to manage back-ups. What I would like to do is create 2 500Gb partitions and use my Acronis software to make mirror images of both my desktop and laptop. Is this do-able? Would it be advisable to delete the "Seagate Dashboard"?
View 5 Replies
View Related
May 23, 2014
two days ago my friend D:/ drive was formatted by someone. and he says that i was the last person using after that format he has seen.i havent done that. i want to is there a way to find the last format date and time of drive . event viewer or any log or any software.
View 14 Replies
View Related
May 24, 2014
I'm in the process of moving to an SSD and need to create a backup drive in order to repair the BIOS after transferring everything. However, when I try to create one - the create a recovery drive program won't recognize the flash drive I have connected as a flash drive.
I first tried with a SanDisk Cruzer which apparently had a quirk in that it shows up as a hard drive instead of removable flash drive. That seems to be well documented on forums all over the place and there is no fix.
So, I purchased a cheap 8 GB stick (no brand) and Windows (I'm running 8.1 x64) recognizes it as a removable disk. However, the create a backup utility still won't recognize it. I've found some random fixes that have worked for some (such as plugging it into a different USB port) but nothing has worked for me so far. I've tried doing it with the "copy the recovery partition" option both checked and unchecked.
If there's no solution to this wonderful "quirk" of Windows, then is there something else I can do to repair BIOS? Seems like there's not a fix to my problem out there...
EDIT So as of right now, I tried using HPs recovery software which seems to do the same thing as copying over your entire recovery partition. That didn't work either. However..when I had both USB sticks plugged in the Windows supplied utility recognized the SanDisk Cruzer when I checked the "copy the partition" thing
View 2 Replies
View Related
Jul 17, 2014
i'm using Windows 8 Home 64 Bit.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
View 9 Replies
View Related
Sep 15, 2014
I'm looking to create a system image of Windows, but my external hard drive already has a bunch of files on the drive. There is plenty of space for the backup, but I'm worried if Windows will format the drive.
View 1 Replies
View Related
Jan 15, 2013
just upgraded to 8 from XP. I have a recovery drive for XP. Can I reformat this recovery drive so I can use it to install & recover Windows 8 instead if I have a problem in the future?
View 1 Replies
View Related
Jun 6, 2014
IE won't work, Windows Store won't access, Can't "Refresh" without OS Disk, Won't access extra hard drive or format. Using Windows 8 Pro, don't have original disk. Can I purchase another Windows 8 Upgrade disk and install it to resolve this problem?
View 3 Replies
View Related
Jul 8, 2014
i have HP 8gb pendrive when i try to format it it shows windows was unable to complete the format. When i try to open it shows insert a disk . How can i format this pendrive ? or is it corrupted ?
View 9 Replies
View Related
Jul 22, 2013
Our customer has recently upgraded Windows server from 2003 to 2008.
In new server, we saw that network printer's definition in registry is in the format of 'Printer on Server', while in old server the printer format was mainly 'ServerPrinter' (although the 'Printer on Server' format existed there too).
So due to this change in printer 'format', we need to modify our software to recognize the new format.
How does windows determines which format to use in printer definition? Is there a way to switch between formats?
(Note: I refer to printer definition under HKEY_CURRENT_USERSoftwareMicrosoftWindows NTCurrentVersionDevices registry key) ...
View 4 Replies
View Related
Jul 24, 2014
i've just formatted my HDD partition where os was. After that I've also deleted the respective partition and now I can not do anything to install the os in that partition, the partition now is unallocated space. I was using Windows 8.1 before all this mess.
View 9 Replies
View Related
Mar 5, 2013
Alright I did a back up of my system on flash drive but now i have to use it... How do I have to have the bios set up? So I can load this up right now my computer says operating system not found...
View 9 Replies
View Related
Sep 1, 2013
The x64 setup can't fit to my 4gb flash drive. Should I use 8gb?
View 5 Replies
View Related
Jan 22, 2014
I got this new Asus Transformer which is a Windows 8.1 system.
I made a few images with Macrium Reflect and created an UEFI recovery Flash Drive (with Macrium) for the Macrium recovery program. I can set the BIOS to boot from the stick (in the temporary or permanent BIOS settings). Problem is, when I hit Enter, it ignores the stick and boots directly into 8.1.
Is there another setting in the BIOS that I have to make in order to have it boot from the stick.
View 9 Replies
View Related
Sep 29, 2013
When I delete files from the hdd I have it set not to prompt me. So how to I turn off delete prompt, when deleting files from flash drive.
View 6 Replies
View Related
Jan 16, 2014
I have a hp 475 homeserver with new upgrades. i'm trying to install windows home server 2011 on it. I want to put the whole sys on a bootable flash drive and install that way. I have ms dvd tool and software for iso files, now I think I need to combine all in a bootable flash drive for win 8.1
View 1 Replies
View Related
