When I try to format my flash drive it shows that the drive is Write-Protected. When I tried to remove it through diskpart it said it completed successfully, but when I try to format it again it still didn't work. I also tried removing it using REGEDIT with storage device policies, but that STILL didn't work.
View 3 RepliesTrying to unlock a flash drive which is in write protected mode in Windows 8. There is no protect switch on the side of the drive.
View 1 Replies View RelatedI have an 8GB flash drive that's write protected. There is no lock/unlock on the flash drive. How can I reformat/erase the contents so I can use the flash drive for other things? I've tried low level and that didn't work.
View 6 Replies View RelatedMy usb is apparently disk write protected. there is no physical switch on the usb. i can't understand it as it was working perfectly one day & the next it was write protected, it maybe to do with the fact that i formatted with 'wii backup manager' allowing me to put downloaded wii games onto the usb & play it on the wii, but i can't remember if i done this or not.
I googled the question and someone said to run cmd, diskpart, list disk, select disk X, attribute disk clear readonly, clean. it goes on for a few more steps but at this point i get the error message "DiskPart has encountered an error: The request could not be performed because of an I/O Device error. See the system event log for more information"
What can i do. the usb is only around a year old so shouldnt be damaged already.
Should I create my own Wallpaper directory or somehow (not sure how) make this directory writeable since it is set up as read only and cannot be changed easily.
View 3 Replies View RelatedI've a relatively new SanDisk Cruzer Slice 64GB USB pen drive, which I use for work mainly. It has somehow managed to write protect itself and no matter what I do I simply cannot remove it!
I've scanned with Antivirus, nothing found
I've tried regedit - ComputerHKEY_LOCAL_MACHINESYSTEM CurrentControlSetControlStorageDevicePolicies
StorageDevicePolices didn't exist so I created a 32 bit Dword string, set to 0 this hasn't done anything
I've tried Diskpart as administrator - DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 298 GB 1024 KB
Disk 1 Online 59 GB 0 B
DISKPART> select disk 1
Disk 1 is now the selected disk.
DISKPART> attributes disk clear readonly
Disk attributes cleared successfully.
DISKPART> clean
DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information. I've checked the logs and it doesn't seem to list anything for the drive
My pendrive is showing the disk is write proteced when i m trying to format the disk... the problem started as when i disconnected the drive without safetly removing the hard disk while usinf it...
It is not showing any options to delete something form it. Neither it is formatting even by diskpart...
When i power on computer, my usb flash drive isn't recognized right away. I need to re-plug the flash drive every time, when i power on computer, then it's recognized normally.
It's not such a big problem, but I have this usb flash drive always plugged at computer back side.
When I plug one of my flash drives into my USB port I get this message F:/is not accessible The request could not be performed because of an I/O device error. I tried a few of the methods I found on the Net but nothing worked.
View 2 Replies View RelatedI have Silicon Power Blaze B20 flash drive, which is not recognized by my desktop PC's both USB 3.0 ports. The flash drive's light blinks when pugged in, but no reaction from PC's side. I have tried to plug cord between flash drive and PC, but no change. It does recognize the device when plugged in any other USB 2.0 port. And the device is being recognized by other computer's both USB 2.0 and USB 3.0 ports, so I assume it is PC's fault, but what it is. My PC's USB 3.0 ports do recognize any other USB 3.0 devices - my external HDD, other USB 3.0 devices but this drive.
View 1 Replies View RelatedThe issue is finding the file location for my flash drive. My computer only has 3 external USB ports. I have tried all of them, when the flash drive is plugged in somewhere on my computer it should indicate another drive location. I can't find anything....not sure where to look or if I'm looking in the right place. All that shows is c: drive & E: drive. The E: drive is exclusive for the OS system restore (can't be used; not accessible for anything else). The only other is the DVD drive. Nowhere can I find evidence of the flash drive plugged into the USB.
I have all the essential drivers & everything is up to date [I have a task scheduler & Driver updater software installed. All drivers are up to date. This is a new computer, only 2 months old].
I have gone into device manager & checked all the USB & composite serial bus controllers to make sure they are powered on (my computer has an energy saving management thing & it will possibly deactivate the hubs when not in use). According to the power management settings they are not set to "sleep" but all ports are active. I can't figure out why I can't find my drive, nothing is appearing when I have the flash drive plugged in.
Yet another lovely problem with 8.1. When I plug in my drive, it shows up in with all of my other drives, and when I double click it to open it, the explorer window freezes, and doesn't unfreeze until I unplug the flash drive. I don't know what went wrong. Maybe it is a driver issue? I am positive that the drive is fine, because it works on my laptop, and even works on this computer in a linux virtual machine.
View 9 Replies View RelatedIt is a 64 GB Toshiba USB drive (TNU). Problem is that every time I try to format to NTFS the normal way with Windows 7 or Windows 8 I get the message: Windows was unable to complete the format.
I tried to format it using the specific software from the drive manufacturer, TNA.
A friend managed to format it to FAT32, but the next time I tried to access the drive Windows showed a message saying that I needed to format the drive to use it. Then there appeared only the exFAT option.
I also tried some partition software, like AOMEI Partition Assistant Standard Edition, and it could format to both FAT32 and NTFS, but when I removed and put the USB drive back Windows again warned me about the need to format and again I had only the exFAT option left.
so my windows install got borked so i formatted drive and did a clean win 8 install (not win 8.1). everything seems to be happy except the entire c: is "protected." can't even make a new folder without a pop up saying I need administrator approval (I am the only user and i am the admin).
View 2 Replies View RelatedWhenever I open new programs, my hard drive jumps up to 100% usage. The problem is my read/write speed looks like it's capped around 10 MB/s. The manufacture says I should get an average of 156 MB/s.
I have a 6 month old Dell XPS 8500 (i7, 8GB RAM, 1TB-7200 rpm hard drive). I consistently take care of it (defrag, clean sweep, virus/malware protection). See the dropbox link or PDF attached for examples of my issue.
Dropbox Link: [URL] .....
Dropbox Video: [URL] .....
Something terrible happened to my computer today. I'm honestly not sure exactly how, but my hard drive locked itself. I was trying to install FL Studio 11, when it kept saying I didn't have write permissions. I thought that the installer might be corrupted, so I downloaded it again. It still had the same issue. I thought maybe it was an issue with Windows 8, so I burned it to a USB and connected my iPhone to iTunes to try and sync some music to it before I restored Windows. Not only did the driver not install, but iTunes closed and said I either don't have read/write permissions or iTunes is on a locked hard drive. Frustrated at this point, I turned my computer off and booted from my Windows 8 install USB.
Windows 8 will not install because it says that my hard drive is locked so I can't install Windows 8 on the hard drive. I tried installing it again and the installer said that the temporary installation files could not be copied to the hard drive. I can't boot into Windows now, it just stays stuck at the flashing symbol (I've left it there for about 5 hours now, still nothing). I have a lot of files that I really need for making my music and a lot of unrecoverable pictures, so I really need to get this computer fixed.
At the moment I'm installing Windows on a USB in hopes I can boot from that and move all my files to a backup PC and then format my hard drive, but I'm not 100% sure that will work. I checked my BIOS and my hard drive is not locked with a password or anything, so this just doesn't make sense to me. It might have something to do with all the partitions I've made in the last few days to install Linux and I decided I didn't need it so I deleted the partitions and extended my main partition again.
Also, I've already tried automatic repair about 6 times nothing has worked, it says it can't fix my PC. I fixed this problem by downloading Hiren's Boot CD, going into Mini XP, moving all my files to another laptop with USB, and formatting my hard drive completely.
I'm in the process of moving to an SSD and need to create a backup drive in order to repair the BIOS after transferring everything. However, when I try to create one - the create a recovery drive program won't recognize the flash drive I have connected as a flash drive.
I first tried with a SanDisk Cruzer which apparently had a quirk in that it shows up as a hard drive instead of removable flash drive. That seems to be well documented on forums all over the place and there is no fix.
So, I purchased a cheap 8 GB stick (no brand) and Windows (I'm running 8.1 x64) recognizes it as a removable disk. However, the create a backup utility still won't recognize it. I've found some random fixes that have worked for some (such as plugging it into a different USB port) but nothing has worked for me so far. I've tried doing it with the "copy the recovery partition" option both checked and unchecked.
If there's no solution to this wonderful "quirk" of Windows, then is there something else I can do to repair BIOS? Seems like there's not a fix to my problem out there...
EDIT So as of right now, I tried using HPs recovery software which seems to do the same thing as copying over your entire recovery partition. That didn't work either. However..when I had both USB sticks plugged in the Windows supplied utility recognized the SanDisk Cruzer when I checked the "copy the partition" thing
My Optical Drive is not showing up in My Computer and I have a laptop. In Device Manager, I found that my MATSHITA BD-CMB UJ160B gives error code 19. What can I do and if need be, where can I get the driver for it?
View 1 Replies View RelatedI am connecting a 640GB Samsung G2 Portable External Hard Drive to my HP Pavilion 15 Laptop.
The external hard drive works on other desktop and laptop computers here at work, but when connected to the HP Pavilion (Windows 8.1 OS) it shows up as a Local Disk (H: but when trying to Open the drive it says:
"Location Not Available H: is not accessible The device is not ready."
What should I do?
I have been experiencing problems trying to back up to external hard drive this week and keep getting an I/O Error with various error messages including 0x8007045D My Hard Drive is "G" and I can see it through my computer no problem and I also have my ITunes library on it and the ITunes music is working fine.
I am getting a message in Action Centre saying my Back Up did not complete successfully and then I have the option of Try to Run Again or change back up settings. If I select Try to Run again windows cannot find the disk or network location and if I change settings "G" does not appear. It seems Back Up has detected an error on my "G" which is preventing it from running the back up.
Also in Disk Management I am prompted to initialise a disc before logical disc manager can access it so I select MBR and I get I/O device error and disk 1/G is unknown/not initialised.I have tried powering the external drive off/on and also disconnecting it from the computer but no difference and at present I cannot save anything to the external hard drive. There is a previous back up already on the hard drive but this is not accessible at present.clearing this error so I can back up again without loosing what is stored on the hard drive in particular my ITunes library.
Alright I did a back up of my system on flash drive but now i have to use it... How do I have to have the bios set up? So I can load this up right now my computer says operating system not found...
View 9 Replies View RelatedThe x64 setup can't fit to my 4gb flash drive. Should I use 8gb?
View 5 Replies View RelatedI got this new Asus Transformer which is a Windows 8.1 system.
I made a few images with Macrium Reflect and created an UEFI recovery Flash Drive (with Macrium) for the Macrium recovery program. I can set the BIOS to boot from the stick (in the temporary or permanent BIOS settings). Problem is, when I hit Enter, it ignores the stick and boots directly into 8.1.
Is there another setting in the BIOS that I have to make in order to have it boot from the stick.
When I delete files from the hdd I have it set not to prompt me. So how to I turn off delete prompt, when deleting files from flash drive.
View 6 Replies View RelatedI have a hp 475 homeserver with new upgrades. i'm trying to install windows home server 2011 on it. I want to put the whole sys on a bootable flash drive and install that way. I have ms dvd tool and software for iso files, now I think I need to combine all in a bootable flash drive for win 8.1
View 1 Replies View RelatedI would like to make a flash drive bootable and I have looked at the utility that HP has called USB Disk Storage Format Tool and every place I have looked to find how to install and use it, the instructions that I have seen do not show up for me when I run the program. Where I can get some good instructions on how to create the flash drive.
View 3 Replies View RelatedI'm trying to take my music from my ps3 and put it on my flash drive and put the music on my computer so i can sync it on my ipod ...
View 1 Replies View RelatedEvery time I put in my flash drive I go to computer and it won't show my flash drive. The computer makes a sound every time I put in my flash drive or take it out but I can't find where to open up the files from my flash drive. It shows up on devices and printers but it doesn't on computer. How do I open my files from it?
View 3 Replies View RelatedI own an Acer laptop that is runing Windows 7. I love Windows 7 and finally made the move from Windows XP but I really like Windows 8. Yet I'm nowhere near ready to make it my only OS. I know one possible option is a dual boot system. If I need to go that route I may be posting again in the future to find out how I can make a dual boot Windows 7/Windows 8 system. Yet I like trying different OS's and already have two USB sticks that are ChromeOS and Ubuntu Linux. I purchase 4GB flash drives and buy the fast drives.
The question is is it possible to install and then boot from a Windows 8 USB Flash Drive? If so, how would I go about doing this? Also, what is the minimum size USB Flash Drive that could be used? I want at least some room to work with and install apps but it won't be my primary OS. If it's not possible to do this how would I go about making a dual boot system? Already I have a 500GB HD with Windows 7 installed but I believe I'd have to repartition and hope to avoid having to reinstall Windows 7 since I have so many installed apps.
When I first got this PC, I made the Recovery DVDs as instructed. Now, I want to make a Recovery Flash Drive, but HP only allows creation of one Recovery item. Is there a way to create a Recovery flash drive after I've already made DVDs?
View 9 Replies View RelatedUSB Flash Drive has to be in GPT?
View 9 Replies View Related