My Optical Drive is not showing up in My Computer and I have a laptop. In Device Manager, I found that my MATSHITA BD-CMB UJ160B gives error code 19. What can I do and if need be, where can I get the driver for it?
View 1 RepliesI have this issue for some days when i boot my PC. I only have my keyboard and mouse on USB, nothing else.
Here is the picture.
I built my PC from scratch on Friday 18th April. On the evening of 21st April I turned my PC on and saw a USB error popping up in a yellow box on the bottom right of my screen. This error was popping up every 5 se conds without fail.
I tried to uninstall the drivers for all USB ports and reinstall but this didn't work. Instead I inspected the error from my Device Manager and read this:
"Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed." ((Port_#0011.Hub_#0003)) My USB devices
I have a Gigabyte H87 3HD Motherboard, a Nvidia GTX 760 graphics card, Intel i5 4440 Quad core processor, EVGA 650w Power Supply. I have Windows 8.1 64-bit as an OS.
With all my USB devices plugged in or without ANY plugged in, the error still pops up regardless. This leads me to believe it could be a problem with the motherboard itself.
I have tried the following solutions:
On and Off againUpdated BIOS to F6 VersionUpdated Windows 8.1Updated Chipset + all DriversWindows Hot FixesUsing CMD and NetMon to asses the USB portsSystem restore
I even right clicked on the error on the Device Manager, uninstalled and the error was still pinging up. Is my computer haunted? None of these have worked. I feel like I have exhausted all my options hence why I have named the thread as such.
I just bought a new Windows 8 computer that doesn't have an optical drive. I need to install Adobe CS3 and Office 2003 on my computer. Both are on disks, can I put them on USB or SD to instal.
View 9 Replies View RelatedAfter the most recent update from Windows Store for Windows 8.1 Pro, my Intel Wireless drivers got busted. I could only connect to the Internet via the Ethernet cable and no matter how hard I try re-installing/uninstalling the drivers for the wireless drivers, I still get the same outcome.
In Device Manger, I checked the listing for Intel PRO/Wireless 3945ABG Network Connection.In the Properties menu, I get this message:
This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system.
I went to install software from Intel's website for diagnosing the wireless driver/connection status, so I ran Intel PROSet/WIreless Tools, and after clicking Diagnose > Run Tests for Hardware Test, I get this message:
Wireless Hardware is not bound to transport driver. My wi-fi switch on the left side of my laptop is already turned on. I switched it off, uninstalled and deleted the driver and restarted the laptop to see if I could reinstall. Upon turning back the switch on after logging into my Windows account, I still get the same outcome: code 12.
Both optical drives are shown as working properly in Device Manager, but 70% of the time will not read data DVD disks. That includes data disks burnt using Nero and ISO Joliet format; and either mutli-session or finalized after burning. And disks formatted like a flash drive in UDF format using Windows 8 burning software. And is the same for R or RW +/- disks.
Rebooting sometimes fixes the program, other times not.
I have an Intel mob and CPU but Intel do not support drivers for Windows 8 so all drivers are generic Windows 8. Running driver update from device manager says all drivers are up to date.
I also intermittently, but regularly, get the printer and webcam USB2 drives not detecting these devices. And occasionally the USB3 external hard drives. USB drivers are also up to date.
Recently, I tried to use the Optical CD/DVD Drive to play a CD, but every time I insert a CD, the drive itself will read it, but the computer won't recognize it. I ended up going to the Device Manager and can't find the Optical Drive!
I was using this a few weeks ago and it worked fine (this was after a Windows 8.1 update).
I'm not sure how I can make my laptop recognize the Optical drive.
I would assume I'm missing a drive, but I can't seem to find it on the Lenovo Driver page.
I have a Lenovo G505 Series Laptop running Windows 8.1 64-bit.
I would really like to have my CD/DVD Drive working again.
This PC" my 2nd internal data HDD shows an Optical Drive icon instead of the usual HDD icon.
View 4 Replies View RelatedSo i had bought a laptop with Windows 8 Pre-installed.
HP Envy 6 1106TX, It doesn't have any CD/DVD Rom or anything. I'm using an external DVDRW
I made my recovery disks and want to do a clean install of Windows 7 on it.
To do this:
I disabled Secure Boot & Legacy something.
Then Set the Boot option to my Optical drive. Finally! the setup started, But as soon as i click on INSTALL NOW At first screen. It doesn't pick up my Optical Drive and says I've to Insert the disk, or choose my USB/CD Drive from the list (which is empty as it doesn't detects it)
2nd thing:I tried installing a clean version of Windows 8. If i enable Secure boot & Legacy. The Optical drive doesn't show up in Boot options to select it as boot. But when i disable it, It detects the drive and the same after the INSTALL NOW screen on windows 8. It says there's no harddrive/optical drive both.
I have a Sony vaio VGX-TP20E. I put the win 8 disk into the computer and setup up the startup to boot from optical drive. But it skips it and starts up win 7 like it normally does. How can I install windows 8?
The first time I did that win7 had some kind of virus in it so I went to the recovery partition and restored the computer to factory settings.
So my other question is if I do somehow get it to work, do I have to delete the recovery partition or do I leave it alone. Logically it would only be able to recover for windows 7 right?
I have a Sony Vaio all in one but it doesn't have a cd drive. I've purchased two and neither were recognized by Windows 8. Can found a USB optical drive recommended?
[URL]
When I try to format my flash drive it shows that the drive is Write-Protected. When I tried to remove it through diskpart it said it completed successfully, but when I try to format it again it still didn't work. I also tried removing it using REGEDIT with storage device policies, but that STILL didn't work.
View 3 Replies View RelatedI am connecting a 640GB Samsung G2 Portable External Hard Drive to my HP Pavilion 15 Laptop.
The external hard drive works on other desktop and laptop computers here at work, but when connected to the HP Pavilion (Windows 8.1 OS) it shows up as a Local Disk (H: but when trying to Open the drive it says:
"Location Not Available H: is not accessible The device is not ready."
What should I do?
I have been experiencing problems trying to back up to external hard drive this week and keep getting an I/O Error with various error messages including 0x8007045D My Hard Drive is "G" and I can see it through my computer no problem and I also have my ITunes library on it and the ITunes music is working fine.
I am getting a message in Action Centre saying my Back Up did not complete successfully and then I have the option of Try to Run Again or change back up settings. If I select Try to Run again windows cannot find the disk or network location and if I change settings "G" does not appear. It seems Back Up has detected an error on my "G" which is preventing it from running the back up.
Also in Disk Management I am prompted to initialise a disc before logical disc manager can access it so I select MBR and I get I/O device error and disk 1/G is unknown/not initialised.I have tried powering the external drive off/on and also disconnecting it from the computer but no difference and at present I cannot save anything to the external hard drive. There is a previous back up already on the hard drive but this is not accessible at present.clearing this error so I can back up again without loosing what is stored on the hard drive in particular my ITunes library.
I'm new to Windows 8 and I'm having a hard time managing my way around. My windows automatically installed almost all of my drivers, but failed to recognize the coprocessor. When i open the properties it says:
The drivers for this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
When i try to find the driver automatically,it fails, but i cant find them aswell.
My motherboard is ASROCK 939a8x-m, therefore it has an nvidia chipset in it. I fail to find the neccessary drivers aswell and i don't know what else to do.
When I do a search of the registry, I get the following errors:
Failed to open HKEY_LOCAL_MACHINESOFTWAREClassesWow6432Nodeigfxdv32.CUIDriver while searching the Registry on Local Computer, Windows reported error code 2.
Registry Search Error. Failed to open HKEY_LOCAL_MACHINESOFTWAREClassesWow6432Nodeigfxdv32.CUIDriver.1 while searching the Registry on Local Computer, Windows reported error code 2.
[Code] .....
If I try to delete or modify any of these entries, they cannot be accessed through regedit but are available to PsExec.exe from System Internals. I haven't tried deleting these entries for obvious reasons since I do not know if they are essential or not.
Windows 8 factory install on HP 500-056 updated to Windows 8.1 from the Microsoft Store.
Since the update, when I shut my computer down at night, there's a mysterious error code that doesn't stay on the desktop long enough for me to read it.
It doesn't seem to be causing any problems, but it's an error code and I don't want it there, needless to say.
I'm unable to install windows 8, it downloads but I get an error code : 0x80240031
View 3 Replies View RelatedI have bought lenovo g50-70 just 20days back, it came with inbuilt windows 8.1, they did not give any recoverable disks with it rather they said to take back up of the OS into a usb stick but I forgot to take the backup and tried to partition the hard disk using EASEUS Partition manager then I got this error "0XC0000225"
I'm unable to boot the windows.
I have a segate 1TB external HDD and right now I barely have anything stored on it. Well, just now when i tried creating a new folder i keep getting error code 0x08000FFFF! What the hell?! This HDD is not even 2 months old! Is it curtains for the drive? Or is there some action I can take?
View 5 Replies View Relatedlately Iv'e been having trouble booting my windows 7 and decided that it's time to upgrade, I bought a copy ofr windows 8 64-bit from microsoft and burned it onto a disk using the windows 7 usb/dvd downloader. I was doing all this from a 32-bit and thus applied the bootsect.exe as needed. When i boot from the disk, everything runs smoothly. I insert the required code and select custom install.
At this point, i select the partitiion and proceed. as the installation proceeeds, it does not apear if the first phase of installation does anything, even after 5 minutes it stays at 0%. after it finaly switches to the next part, I wait again for the next phase, but it only throws up a message "windows cannot install required files. make sure all files required for installation are available, and restart the installation. error code 0x8007048F"
After multiple attempts I decided to reinstall windows 7, but now I get the same error.
In Win Mail I keep getting this error code every time I try to send in receive on just one of my mail accounts. It is a .rr. account. I can send and receive, but I keeps filling my inbox with the same emails over and over. Almost like the emails haven't "cleared the server" and the server keeps sending me the same emails.
View 3 Replies View RelatedI am getting the same error code 0x80072EE7 but when i connect to the internet it says activated once i disconnect the internet it says not activated.
View 2 Replies View RelatedI have Windows 8.1 PRO x64bit SK (Slovakian Language Interface) + (Update 1) and Samsung Galaxy S3 GT-I9300 Android Ver. 4.3 Jelly Bean.
My problem is: Windows doesn't see my smartphone when I connect the USB cable to the phone and the computer.
I dont have installed Samsung KIES , because i trying to install KIES SW yesterday, but I was wrong and kies phone absolutely not seen and not recognized.
Trying to update drivers SAMSUNG Electronics Co., Ltd. - Other hardware - SAMSUNG Mobile MTP Device and SAMSUNG Electronics Co., Ltd. - Other hardware - SAMSUNG Mobile USB Composite Device via device manager and nothing to do , i got error message this device driver was not recognized.
Sample images:
I'm having a problem trying to restore Win 8.1 after a crash. All I get is a blue screen with an error code.
I finally deduced that I was having a hardware problem with my beloved SSD (weird glitches and erratic behavior, occasional recognition errors in BIOS, and finally I/O errors when trying to restore from backup), so I pulled it out, and temporarily replaced it with a spare HDD of slightly larger size. The backup/restore program I use is Paragon, and it has worked flawlessly for me for some time, including when I migrated Win 8.0 to that SSD over a year ago. So I pulled up the last full-disk backup (from 4 weeks ago) and did a Restore to the replacement HDD, but the resulting installation will not boot. I've tried it several times, including using a different archive, and each time I get a blue screen saying "Your PC needs to be repaired", with an error code 0xc0000034.
What is this error code, and how do I go about fixing the problem? Is there some kind of issue with restoring an SSD backup to an HDD? (I know there is something about the partition alignment which may be different, for instance.) This program worked just fine in the opposite direction, meaning restoring a backup of an HDD to the SSD.
I might have been able to use the recovery media to fix the problem, if I had the current media... unfortunately, the disk I created was from prior to the 8.1 upgrade, and it won't work anymore. My mistake. But short of a clean install back to 8.0, and then another upgrade to 8.1.
I Im getting an error when trying to add a components it says visual basic 6.0 object library not registered and underneath that it shows cwindowsyswow64mscomctil.ocx, how can i fixes this I have tried a lot of programs to fix the registry error fixes , but it still dose not work. What can I do to make my visual basic 6.0 work, I have installed and uninstalled the software and i still get this error.
View 9 Replies View RelatedI have a Windows 8.1 which I upgraded from my purchased W-8.
Decided to order the Windows 8.1 Media Center Pack. Ordered online and installed.
Got Windows Activation screen saying Windows can't activate right now. Try activating later. If that doesn't work, contact support.
The Current product key is the new one I just received.
Entering my old W-8 key doesn't work.
Unable to reinstall Windows 8 with Error code: 0xc000000f "File:Windowssystem32winload.efi"
I have got a problem in loading the operating system, only the following details are shown on screen.
My laptop is DELL VOSTRO, Model 3560, windows 8,64 BIT 3RD GEN i5
Recovery
Your PC needs to be repaired
The application or operating system couldn't be loaded because a required file is missing or contains error.
File:Windowssystem32winload.efi
Error code: 0xc000000f
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacture.
Press Enter to try again
Press F8 for Startup Settings
Press Esc for UEFI Firmware settings
When I press Enter OR F8 screen just flashes but nothing happens and I also tried to re-install windows 8, installation was successful but windows could not load but appeared that couldn't attempt the repairs.
What does this error code mean and how do I fix it?
View 9 Replies View RelatedMy acer aspire laptop running on windows 8 updated to 8.1 .As now got a blank screen and says Preparing automatic repair and does nothing ...
View 12 Replies View RelatedI am trying to install Windows 8 64 Bit on a HP 2530p laptop using a USB Flash Drive that I set up with DiskPart and copied OS files to - from DVD disc. I first tried to install using a DVD disc in a external DVD RW I plugged into USB port of laptop - this laptop has no built-in optical drive. I got the same error code with DVD disc that I get with USB Flash drive. I formatted HD during beginning of install so there is no OS on laptop...
Windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570.
I ran a MemTest86 and did a HD Test from BIOS and both passed.