In Win Mail I keep getting this error code every time I try to send in receive on just one of my mail accounts. It is a .rr. account. I can send and receive, but I keeps filling my inbox with the same emails over and over. Almost like the emails haven't "cleared the server" and the server keeps sending me the same emails.
View 3 RepliesI have bought lenovo g50-70 just 20days back, it came with inbuilt windows 8.1, they did not give any recoverable disks with it rather they said to take back up of the OS into a usb stick but I forgot to take the backup and tried to partition the hard disk using EASEUS Partition manager then I got this error "0XC0000225"
I'm unable to boot the windows.
lately Iv'e been having trouble booting my windows 7 and decided that it's time to upgrade, I bought a copy ofr windows 8 64-bit from microsoft and burned it onto a disk using the windows 7 usb/dvd downloader. I was doing all this from a 32-bit and thus applied the bootsect.exe as needed. When i boot from the disk, everything runs smoothly. I insert the required code and select custom install.
At this point, i select the partitiion and proceed. as the installation proceeeds, it does not apear if the first phase of installation does anything, even after 5 minutes it stays at 0%. after it finaly switches to the next part, I wait again for the next phase, but it only throws up a message "windows cannot install required files. make sure all files required for installation are available, and restart the installation. error code 0x8007048F"
After multiple attempts I decided to reinstall windows 7, but now I get the same error.
I have Windows 8.1 PRO x64bit SK (Slovakian Language Interface) + (Update 1) and Samsung Galaxy S3 GT-I9300 Android Ver. 4.3 Jelly Bean.
My problem is: Windows doesn't see my smartphone when I connect the USB cable to the phone and the computer.
I dont have installed Samsung KIES , because i trying to install KIES SW yesterday, but I was wrong and kies phone absolutely not seen and not recognized.
Trying to update drivers SAMSUNG Electronics Co., Ltd. - Other hardware - SAMSUNG Mobile MTP Device and SAMSUNG Electronics Co., Ltd. - Other hardware - SAMSUNG Mobile USB Composite Device via device manager and nothing to do , i got error message this device driver was not recognized.
Sample images:
Unable to reinstall Windows 8 with Error code: 0xc000000f "File:Windowssystem32winload.efi"
I have got a problem in loading the operating system, only the following details are shown on screen.
My laptop is DELL VOSTRO, Model 3560, windows 8,64 BIT 3RD GEN i5
Recovery
Your PC needs to be repaired
The application or operating system couldn't be loaded because a required file is missing or contains error.
File:Windowssystem32winload.efi
Error code: 0xc000000f
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacture.
Press Enter to try again
Press F8 for Startup Settings
Press Esc for UEFI Firmware settings
When I press Enter OR F8 screen just flashes but nothing happens and I also tried to re-install windows 8, installation was successful but windows could not load but appeared that couldn't attempt the repairs.
I have a pc that which it's cpu is 64 bit base and in the past i installed windows xp x64.now i want to install windows 8.1. At first I tried to install windows 8.1 X64 but after installation it cannot boot and the error is :
Error Code 0x0000005D
Parameters
0x00000000BFEBFBFF
0x0000000020100800
0X0000000000000001
0X0000000000000002
After that i installed window 8.1 X32 and it works fine ,but I want to know why i cannot install x64 .i am trying to installing and troubleshooting of that on other pc that is exactly like mine. I cheked the cpu with core info and the result is :
Coreinfo v3.21 - Dump information on system CPU and memory topology
Copyright (C) 2008-2013 Mark Russinovich
Sysinternals - Windows Sysinternals: Documentation, downloads and additional resources
Intel(R) Xeon(TM) CPU 3.20GHz
x86 Family 15 Model 4 Stepping 10, Genuine Intel
[Code] .......
I am trying to download the windows 8.1 on a windows 8.0 Toshiba S855D-S5120Laptop. Laptop specs 2.3 APU A10 Quad Core, 700 Giga HDD, 8 Giga RAM, and graphic ATI 2 giga memory 1200 x 800 screen . The OS is the first edition of windows 8.0 and I had widows preview 8.1 on it downloaded from the windows store. When I download the windows 8.1 from the store, I get this error code 80240031 ( I looked up the error coded and it mean invalid file) at 50% file download. I have used the windows restore function to restore the laptop to windows 8.0 and still the windows update does not work. I have tried resetting setting to default factory settings and same thing happens with the download. I have also bought the window pro 8.1 pack and the same thing with the windows 8.1 it stops at 50% and same error code comes up. I have also done the WSReset.exe and no improvement. I have all of windows updates and still nothing I do is working.
View 1 Replies View RelatedWindows 8 Backup has been working fine for 12 months to an external Seagate USB hard drive.I'm now getting a "device not ready" message with error code 0x80070015 and the backup fails within 30 secs of starting. I've checked the drive for errors and there are no problems. I can read /write files to the external drive. There is ample spare space on the external drive to store the backup file. How to investigate and solve this problem.
View 4 Replies View RelatedI have been using Windows 8 Pro for about five months and running the backup utility for about four months with no major issues. I have used it to create a system image and scheduled to back up my data files weekly.
For the past two weeks I have been getting an error message "error code 0x80780049" along with a message that my files did not backup.
My backup is via esata to an external drive and as mentioned above this was working fine (I even tried a restore of a couple of files to prove it) but now it will not complete the backup. I even deleted the entire backup and started again from scratch but backup fails at about 50% completion. I have checked with windows defender and no viruses exist.
My computer came with pre-installed Windows 8 Single Language but I can't active it. I contacted Microsoft but they didn't response. My error code: 0xC004F074.
View 4 Replies View RelatedI have been trying to change my language all day but I cant seem to execute the command "dism /Online /Add-Package /PackagePath:C:lp.cab" in my command prompt. I get the above error. I have downloaded the language pack and put it in my root C drive and renamed it ip.cab
View 9 Replies View RelatedI'm having trouble with my HP laptop. I've had this happen before and I had to completely reset my laptop because of it.
Basically I went to log in this morning, it said my profile couldn't be found and signed me out. I then tried again to log in and the Start menu has been flickering continuously and I can't select anything, it has also 'lost' all of my stuff so it looks like a temporary profile..
I have tried googling for an answer and cannot find anything that works, when I try to 'refresh' my laptop via going to safe mode it comes up with the error code: 80070490. I've tried to do a 'clean boot' in safe mode but that won't work properly..
When trying to log in to a Microsoft account either in Skydrive or Windows Store I get error code 0x80070426.
I have tried WSReset.exe (windows store reset), apps.diagcab and microsoftaccounts.diagcab, but with no luck.
Windows 8.1 Pro non-WMC x64 retail phone activated.
I have tried to start up my PC recently and I get the message that my boot system has failed due to the fact it's missing the file "BCD".
I have contacted the microsoft company to report this issue, no support without my product code, or a disc/USB with the windows 8 system on it.
I have none of these and yet my issue still remains. My PC has worked perfectly the day before I shut it down. I'm trying very hard to restore my system but all I can find of the ways to restore it is by clicking control panel, etc...
I cannot access my laptop's desktop all I get is this error message and options to enter the setup utilities, firmware and boot options.
In all I'm asking for is, is there a way to restore my system from any of these options or is this another toss away laptop because windows 8 has failed to find this missing file?
I cannot get a replacement because I do not have the key with me that was used to install the operating system. This is all very frustrating and not to mention my job relies on this computer so it's putting everything to risk with my situation right now.
I purchased a new laptop last week: Lenovo G500.it has Windows 8 pre-installed.at present i am still using the pre-installed McAfee Internet security programme for my AV;i have successfully done all updates(which are set to automatic)
However-despite 5 attempts to free upgrade to 8.1 i am still getting the Error Code 0x80072ee2 message and installation fails. on checking this out i am finding 'fixes' but these require installation of 'repair tool' type applications(only operable if bought etc).
I have this issue for some days when i boot my PC. I only have my keyboard and mouse on USB, nothing else.
Here is the picture.
From Windows 8,trying to download Windows 8.1 from store. Am getting error code ox80070652. Have received all updates, according to computer message.
View 2 Replies View RelatedI have Windows 8.0 and I keep getting this message while trying to update the video app from the Windows Store. Is there any way to solve this problem and download the update to this app?...or Is there another app I can use to replace the video app?
View 1 Replies View Relatedi cant access my windows 8 store
when i try to install apps it shows " you cant make purchase "
error code is 0x80070422
After the most recent update from Windows Store for Windows 8.1 Pro, my Intel Wireless drivers got busted. I could only connect to the Internet via the Ethernet cable and no matter how hard I try re-installing/uninstalling the drivers for the wireless drivers, I still get the same outcome.
In Device Manger, I checked the listing for Intel PRO/Wireless 3945ABG Network Connection.In the Properties menu, I get this message:
This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system.
I went to install software from Intel's website for diagnosing the wireless driver/connection status, so I ran Intel PROSet/WIreless Tools, and after clicking Diagnose > Run Tests for Hardware Test, I get this message:
Wireless Hardware is not bound to transport driver. My wi-fi switch on the left side of my laptop is already turned on. I switched it off, uninstalled and deleted the driver and restarted the laptop to see if I could reinstall. Upon turning back the switch on after logging into my Windows account, I still get the same outcome: code 12.
I have a problem where I turn on my pc and get error code 0xc0000225. It's and Acer desktop I bought July (2013) for a little B-Day present . But now it stopped working. I can't take it to a repair shop because
1. I'm not a fan of them
2. They tend to take like a week :I
I need it soon I'm only using my other laptop. I make like intro/outro's for people and I have one person who asked me a week ago which I feel bad about. Plus all my school work is on there and my dad also has his job documents nothing can be erased on there.
Just installed Win 8 in VMware today.
15 updates installed successfully.
A few hours later, Windows Defender KB2267602, definition 1.125.4350, 59.7 MB update failed to installed.
Error code 8050A003
Found something strange. I opened the View Updates history, and I found out that the update was installed successfully when it was offered the first time. A few hours late, same update was offered again, and this time it failed to install.
When I do a search of the registry, I get the following errors:
Failed to open HKEY_LOCAL_MACHINESOFTWAREClassesWow6432Nodeigfxdv32.CUIDriver while searching the Registry on Local Computer, Windows reported error code 2.
Registry Search Error. Failed to open HKEY_LOCAL_MACHINESOFTWAREClassesWow6432Nodeigfxdv32.CUIDriver.1 while searching the Registry on Local Computer, Windows reported error code 2.
[Code] .....
If I try to delete or modify any of these entries, they cannot be accessed through regedit but are available to PsExec.exe from System Internals. I haven't tried deleting these entries for obvious reasons since I do not know if they are essential or not.
Windows 8 factory install on HP 500-056 updated to Windows 8.1 from the Microsoft Store.
Since the update, when I shut my computer down at night, there's a mysterious error code that doesn't stay on the desktop long enough for me to read it.
It doesn't seem to be causing any problems, but it's an error code and I don't want it there, needless to say.
I'm unable to install windows 8, it downloads but I get an error code : 0x80240031
View 3 Replies View RelatedI'm using the Asus Eee Slate EP121. This happened more than once that Windows prompted me to install an update, then fails. Sometimes the update prompt disappears even though it was not installed. Today it prompted me to install an update called "Qualcomm Atheros Communications driver update for Bluetooth Module" and failed.
Error code 80070103.
I have a segate 1TB external HDD and right now I barely have anything stored on it. Well, just now when i tried creating a new folder i keep getting error code 0x08000FFFF! What the hell?! This HDD is not even 2 months old! Is it curtains for the drive? Or is there some action I can take?
View 5 Replies View RelatedI am getting the same error code 0x80072EE7 but when i connect to the internet it says activated once i disconnect the internet it says not activated.
View 2 Replies View RelatedI'm having a problem trying to restore Win 8.1 after a crash. All I get is a blue screen with an error code.
I finally deduced that I was having a hardware problem with my beloved SSD (weird glitches and erratic behavior, occasional recognition errors in BIOS, and finally I/O errors when trying to restore from backup), so I pulled it out, and temporarily replaced it with a spare HDD of slightly larger size. The backup/restore program I use is Paragon, and it has worked flawlessly for me for some time, including when I migrated Win 8.0 to that SSD over a year ago. So I pulled up the last full-disk backup (from 4 weeks ago) and did a Restore to the replacement HDD, but the resulting installation will not boot. I've tried it several times, including using a different archive, and each time I get a blue screen saying "Your PC needs to be repaired", with an error code 0xc0000034.
What is this error code, and how do I go about fixing the problem? Is there some kind of issue with restoring an SSD backup to an HDD? (I know there is something about the partition alignment which may be different, for instance.) This program worked just fine in the opposite direction, meaning restoring a backup of an HDD to the SSD.
I might have been able to use the recovery media to fix the problem, if I had the current media... unfortunately, the disk I created was from prior to the 8.1 upgrade, and it won't work anymore. My mistake. But short of a clean install back to 8.0, and then another upgrade to 8.1.
I Im getting an error when trying to add a components it says visual basic 6.0 object library not registered and underneath that it shows cwindowsyswow64mscomctil.ocx, how can i fixes this I have tried a lot of programs to fix the registry error fixes , but it still dose not work. What can I do to make my visual basic 6.0 work, I have installed and uninstalled the software and i still get this error.
View 9 Replies View RelatedMy Optical Drive is not showing up in My Computer and I have a laptop. In Device Manager, I found that my MATSHITA BD-CMB UJ160B gives error code 19. What can I do and if need be, where can I get the driver for it?
View 1 Replies View Related