Windows 8 factory install on HP 500-056 updated to Windows 8.1 from the Microsoft Store.
Since the update, when I shut my computer down at night, there's a mysterious error code that doesn't stay on the desktop long enough for me to read it.
It doesn't seem to be causing any problems, but it's an error code and I don't want it there, needless to say.
When I do a search of the registry, I get the following errors:
Failed to open HKEY_LOCAL_MACHINESOFTWAREClassesWow6432Nodeigfxdv32.CUIDriver while searching the Registry on Local Computer, Windows reported error code 2.
Registry Search Error. Failed to open HKEY_LOCAL_MACHINESOFTWAREClassesWow6432Nodeigfxdv32.CUIDriver.1 while searching the Registry on Local Computer, Windows reported error code 2.
[Code] .....
If I try to delete or modify any of these entries, they cannot be accessed through regedit but are available to PsExec.exe from System Internals. I haven't tried deleting these entries for obvious reasons since I do not know if they are essential or not.
I'm unable to install windows 8, it downloads but I get an error code : 0x80240031
View 3 Replies View RelatedI was getting the error in the picture when I shut down Windows 8 after a session.
It seems to have gone with the latest update but worth observing nonetheless.
I have bought lenovo g50-70 just 20days back, it came with inbuilt windows 8.1, they did not give any recoverable disks with it rather they said to take back up of the OS into a usb stick but I forgot to take the backup and tried to partition the hard disk using EASEUS Partition manager then I got this error "0XC0000225"
I'm unable to boot the windows.
I have a segate 1TB external HDD and right now I barely have anything stored on it. Well, just now when i tried creating a new folder i keep getting error code 0x08000FFFF! What the hell?! This HDD is not even 2 months old! Is it curtains for the drive? Or is there some action I can take?
View 5 Replies View Relatedlately Iv'e been having trouble booting my windows 7 and decided that it's time to upgrade, I bought a copy ofr windows 8 64-bit from microsoft and burned it onto a disk using the windows 7 usb/dvd downloader. I was doing all this from a 32-bit and thus applied the bootsect.exe as needed. When i boot from the disk, everything runs smoothly. I insert the required code and select custom install.
At this point, i select the partitiion and proceed. as the installation proceeeds, it does not apear if the first phase of installation does anything, even after 5 minutes it stays at 0%. after it finaly switches to the next part, I wait again for the next phase, but it only throws up a message "windows cannot install required files. make sure all files required for installation are available, and restart the installation. error code 0x8007048F"
After multiple attempts I decided to reinstall windows 7, but now I get the same error.
In Win Mail I keep getting this error code every time I try to send in receive on just one of my mail accounts. It is a .rr. account. I can send and receive, but I keeps filling my inbox with the same emails over and over. Almost like the emails haven't "cleared the server" and the server keeps sending me the same emails.
View 3 Replies View RelatedI am getting the same error code 0x80072EE7 but when i connect to the internet it says activated once i disconnect the internet it says not activated.
View 2 Replies View RelatedI have Windows 8.1 PRO x64bit SK (Slovakian Language Interface) + (Update 1) and Samsung Galaxy S3 GT-I9300 Android Ver. 4.3 Jelly Bean.
My problem is: Windows doesn't see my smartphone when I connect the USB cable to the phone and the computer.
I dont have installed Samsung KIES , because i trying to install KIES SW yesterday, but I was wrong and kies phone absolutely not seen and not recognized.
Trying to update drivers SAMSUNG Electronics Co., Ltd. - Other hardware - SAMSUNG Mobile MTP Device and SAMSUNG Electronics Co., Ltd. - Other hardware - SAMSUNG Mobile USB Composite Device via device manager and nothing to do , i got error message this device driver was not recognized.
Sample images:
I'm having a problem trying to restore Win 8.1 after a crash. All I get is a blue screen with an error code.
I finally deduced that I was having a hardware problem with my beloved SSD (weird glitches and erratic behavior, occasional recognition errors in BIOS, and finally I/O errors when trying to restore from backup), so I pulled it out, and temporarily replaced it with a spare HDD of slightly larger size. The backup/restore program I use is Paragon, and it has worked flawlessly for me for some time, including when I migrated Win 8.0 to that SSD over a year ago. So I pulled up the last full-disk backup (from 4 weeks ago) and did a Restore to the replacement HDD, but the resulting installation will not boot. I've tried it several times, including using a different archive, and each time I get a blue screen saying "Your PC needs to be repaired", with an error code 0xc0000034.
What is this error code, and how do I go about fixing the problem? Is there some kind of issue with restoring an SSD backup to an HDD? (I know there is something about the partition alignment which may be different, for instance.) This program worked just fine in the opposite direction, meaning restoring a backup of an HDD to the SSD.
I might have been able to use the recovery media to fix the problem, if I had the current media... unfortunately, the disk I created was from prior to the 8.1 upgrade, and it won't work anymore. My mistake. But short of a clean install back to 8.0, and then another upgrade to 8.1.
I Im getting an error when trying to add a components it says visual basic 6.0 object library not registered and underneath that it shows cwindowsyswow64mscomctil.ocx, how can i fixes this I have tried a lot of programs to fix the registry error fixes , but it still dose not work. What can I do to make my visual basic 6.0 work, I have installed and uninstalled the software and i still get this error.
View 9 Replies View RelatedMy Optical Drive is not showing up in My Computer and I have a laptop. In Device Manager, I found that my MATSHITA BD-CMB UJ160B gives error code 19. What can I do and if need be, where can I get the driver for it?
View 1 Replies View RelatedI have a Windows 8.1 which I upgraded from my purchased W-8.
Decided to order the Windows 8.1 Media Center Pack. Ordered online and installed.
Got Windows Activation screen saying Windows can't activate right now. Try activating later. If that doesn't work, contact support.
The Current product key is the new one I just received.
Entering my old W-8 key doesn't work.
Unable to reinstall Windows 8 with Error code: 0xc000000f "File:Windowssystem32winload.efi"
I have got a problem in loading the operating system, only the following details are shown on screen.
My laptop is DELL VOSTRO, Model 3560, windows 8,64 BIT 3RD GEN i5
Recovery
Your PC needs to be repaired
The application or operating system couldn't be loaded because a required file is missing or contains error.
File:Windowssystem32winload.efi
Error code: 0xc000000f
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacture.
Press Enter to try again
Press F8 for Startup Settings
Press Esc for UEFI Firmware settings
When I press Enter OR F8 screen just flashes but nothing happens and I also tried to re-install windows 8, installation was successful but windows could not load but appeared that couldn't attempt the repairs.
What does this error code mean and how do I fix it?
View 9 Replies View RelatedMy acer aspire laptop running on windows 8 updated to 8.1 .As now got a blank screen and says Preparing automatic repair and does nothing ...
View 12 Replies View RelatedI am trying to install Windows 8 64 Bit on a HP 2530p laptop using a USB Flash Drive that I set up with DiskPart and copied OS files to - from DVD disc. I first tried to install using a DVD disc in a external DVD RW I plugged into USB port of laptop - this laptop has no built-in optical drive. I got the same error code with DVD disc that I get with USB Flash drive. I formatted HD during beginning of install so there is no OS on laptop...
Windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570.
I ran a MemTest86 and did a HD Test from BIOS and both passed.
My laptop is ASUS S46C, come with window 8 OEM 64bit. As a diligent updater, i gt 8.1 through the window store. A few days ago, i gt error code 0xc0000185 with the BSOD. I borrowed a window 8 dvd and somehow able to bypass the problem without reinstalling the window.
But now the system seems corrupted or lack of some system files as explorer and firefox always freeze. But when i tried to refresh/reset the BSOD appeared again with the error code 0xc0000185.
I have tried to created an iso file but both the normal product ID and the product key i found by Belarc Advisor does not work. I guess OEM key is no use after all. So can i know what are my options?
Error:
Recovery. Your PC needs to be repaired. The boot configuration data file is missing some required information.
FileBCD Error Code: 0xc0000034
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disk or usb device) contact your system administrator or pc manufacturer.
Press esc for UEFI firmware settings.
I have a pc that which it's cpu is 64 bit base and in the past i installed windows xp x64.now i want to install windows 8.1. At first I tried to install windows 8.1 X64 but after installation it cannot boot and the error is :
Error Code 0x0000005D
Parameters
0x00000000BFEBFBFF
0x0000000020100800
0X0000000000000001
0X0000000000000002
After that i installed window 8.1 X32 and it works fine ,but I want to know why i cannot install x64 .i am trying to installing and troubleshooting of that on other pc that is exactly like mine. I cheked the cpu with core info and the result is :
Coreinfo v3.21 - Dump information on system CPU and memory topology
Copyright (C) 2008-2013 Mark Russinovich
Sysinternals - Windows Sysinternals: Documentation, downloads and additional resources
Intel(R) Xeon(TM) CPU 3.20GHz
x86 Family 15 Model 4 Stepping 10, Genuine Intel
[Code] .......
Recently I have downloaded a few things that require the .NET framework 3.5. When I go to download/ install this, it moves realy fast, then stops and says: "Windows couldn't complete the requested changes" with the error code '0x800F081F'. I have been trying to do this for weeks now, and keep getting this error.
Some things to note:
I downloaded Windows 8 (Pro, 64)
My computer had a problem and I had to refresh it.
On an Asus laptop with Windows 8 preinstalled, I have secure boot on, AV off, but every time I try to install the update from the Windows Store I get as far as:
Getting the update ready This App wasn't installed, - view details.Something happened and the Windows 8.1 couldn't be installed. Please try again. Error code 0x800703f9
I've tried installing with nearly every non-windows process disabled, but that doesn't work.
I am trying to download the windows 8.1 on a windows 8.0 Toshiba S855D-S5120Laptop. Laptop specs 2.3 APU A10 Quad Core, 700 Giga HDD, 8 Giga RAM, and graphic ATI 2 giga memory 1200 x 800 screen . The OS is the first edition of windows 8.0 and I had widows preview 8.1 on it downloaded from the windows store. When I download the windows 8.1 from the store, I get this error code 80240031 ( I looked up the error coded and it mean invalid file) at 50% file download. I have used the windows restore function to restore the laptop to windows 8.0 and still the windows update does not work. I have tried resetting setting to default factory settings and same thing happens with the download. I have also bought the window pro 8.1 pack and the same thing with the windows 8.1 it stops at 50% and same error code comes up. I have also done the WSReset.exe and no improvement. I have all of windows updates and still nothing I do is working.
View 1 Replies View RelatedI am trying to install GTasks application in windows 8, but after clicking install it says this app was not installed and gives this error code: 0x80073cf9
Here is a screenshot:
Is there any other way to install this application? It installed just fine on my tablet (google nexus 10), but somehow it doesnt seem to work on windows 8
Maybe there is a manual way of installing an app.
Windows 8 Backup has been working fine for 12 months to an external Seagate USB hard drive.I'm now getting a "device not ready" message with error code 0x80070015 and the backup fails within 30 secs of starting. I've checked the drive for errors and there are no problems. I can read /write files to the external drive. There is ample spare space on the external drive to store the backup file. How to investigate and solve this problem.
View 4 Replies View RelatedI have been using Windows 8 Pro for about five months and running the backup utility for about four months with no major issues. I have used it to create a system image and scheduled to back up my data files weekly.
For the past two weeks I have been getting an error message "error code 0x80780049" along with a message that my files did not backup.
My backup is via esata to an external drive and as mentioned above this was working fine (I even tried a restore of a couple of files to prove it) but now it will not complete the backup. I even deleted the entire backup and started again from scratch but backup fails at about 50% completion. I have checked with windows defender and no viruses exist.
in my previous mentioned as c as partition active and then made its as inactive
after that i am getting error code 0x000000f when troubleshooting the systems. how to fix that problem without re installing the windows again.
The BSOD displays "system_service_exception (win32k.sys)" when I launch TreePad Business Edition (Treepad Business Edition: All-in-one Organizer, PIM/database, Word Processor, notes manager, search engine, Web site generator and much more!) from the PC or SD card; same result in XP or W7 compatibility mode. After searching for the error code, I am reading this relates to a hardware driver.
TreePad shows Windows 8 is supported on the home page (Treepad: Personal Information Manager, Notes Organizer, Word Processor, PIM, Database and more!) but not on the Business Edition page. As well, while running the install wizard, Windows 8 is listed as compatible. Attempts to contact TreePad about this issue and to verify supported Windows' versions have been unsuccessful.
For the past few weeks I have been experiencing random, albeit infrequent, BSOD's.
1. Occurred while using Thunderbird
2. Occurred while using Firefox
3. Occurred while playing Dota 2
I had several processes open behind the programs listed.
What tends to happen is that the mouse and/or keyboard stops working before the computer crashes. Then it stalls at the Bios screen and will not boot up without a restart.
A few things:
1. The CPU is overclocked, but the overclock was working well on prior installations.
The other systems used MBR as opposed to GPT which the current system uses. (Don't know if this matters).
2. I made a few changes to the system settings to try and optimize my SSD (see: The SSD Optimization Guide Redesigned | The SSD Review and SSD tweaker)
I plan to run Memtest and Prime95.
My computer came with pre-installed Windows 8 Single Language but I can't active it. I contacted Microsoft but they didn't response. My error code: 0xC004F074.
View 4 Replies View Related