Windows 8 Flickering Start Menu - Error Code 80070490
Nov 3, 2013
I'm having trouble with my HP laptop. I've had this happen before and I had to completely reset my laptop because of it.
Basically I went to log in this morning, it said my profile couldn't be found and signed me out. I then tried again to log in and the Start menu has been flickering continuously and I can't select anything, it has also 'lost' all of my stuff so it looks like a temporary profile..
I have tried googling for an answer and cannot find anything that works, when I try to 'refresh' my laptop via going to safe mode it comes up with the error code: 80070490. I've tried to do a 'clean boot' in safe mode but that won't work properly..
I'm having trouble with my HP laptop. I've had this happen before and I had to completely reset my laptop because of it.
Basically I went to log in this morning, it said my profile couldn't be found and signed me out. I then tried again to log in and the Start menu has been flickering continuously and I can't select anything, it has also 'lost' all of my stuff so it looks like a temporary profile.. I have tried googling for an answer and cannot find anything that works, when I try to 'refresh' my laptop via going to safe mode it comes up with the error code: 80070490. I've tried to do a 'clean boot' in safe mode but that won't work properly...
an error message in Device Manager when installing the network attached storage drives like MyBook Live, the drives themselves seem to work fine and i have access to them (most of the time) on my home netwok, however i keep getting that little yellow triangle telling me that something is wrong, specifically:
the device manager error code is This device cannot start. (Code 10)
I've recently purchased a new laptop with Windows 8.1 pre-installed. First question is how do i enable a confirm window to pop up when deleting something? I don't like how i can just hit delete and it moves it (Only to the recycle bin, but i'd rather it didn't).
Secondly how do i stop the start menu from switching to that Windows 8 menu view? I did originally change it so that when you click the start menu (Bottom left in) it would actually bring up the start menu, but it seems to have reverted. On top of this how do i change it so that pressing the Windows button brings up the start menu rather than the Windows 8 menu view thing?
Thirdly how do i enable file details when in Windows Explorer. So in Windows 7 when you select a file it would give the size, name, author, date last edited etc in the details pane. How do i get that now?
Finally, how do i change my task bars transparency?
When you launch skype from the startmenu it is a huge square, when i launch task manager from the startmenu it is launched to the desktop.
Could there be a way to make the task menu launch from the startmenu to be a big square like skype is "phone eddition"
This would be useful because when im in games and the game freezes, i can bring up the start menu like SUPER FAST and it is visible but when i launch the task manager it is behind the game no matter what, so im always pressing the key stroke of the first letter of the game and pressing delete to see if i closed the game or not.
I actually have no problem with the Win 8.1 Start menu, but the colors of the regular desktop environment are killing me. Namely, the weird, off-off white of the menus. The High-Contrast White option under Personalization gives me the right color for the menu backgrounds but everything else about the theme screams windows 3.1, so I'd rather not resort to using that.
Is there maybe a registry tweak that I can use to change this one little color? I've tried a few things but nothing so far has worked.
3 days before my Windows 8.1 pc wasn't working during log in it showed up with "The System Event Notification Service service failed the sign in."
I posted this thread but no one replied then back yesterday I ran it into Safe Mode and used the CMD and put these "sfc/scannow" then the PC booted into Safe Mode.
But in my Start Menu many apps won't open accept Facebook, Twitter, Photos and the Store opens, and when I goto install apps it shows "This app wasn't installed"
And my Start menu is like this:
And the "sfc/scannow" command shows that there are Corrupted or Missing Files Then I also did these:
DISM.exe /Online /Cleanup-image /ScanhealthDISM.exe /Online /Cleanup-image /Restorehealth But then also no luck .what to do I updated my PC from Windows 8 to Windows 8.1 4 days before And this happened 3 days before And the PC started to boot from yesterday.
How To create a start button shortcut to get to start menu in the taskbar. So that we don't need to click the invisible place in the taskbar And there would be a button on which we will click to go to the metro ui start menu.
If we will click on the start button Then We can get The Start Screen. Is there any way to create it??
I see there is a Classic Start 8 Menu that once installed will give you back the Windows 7 style menu. If you install it, can you still go back to the default Windows 8 Start page if you like?
I have bought lenovo g50-70 just 20days back, it came with inbuilt windows 8.1, they did not give any recoverable disks with it rather they said to take back up of the OS into a usb stick but I forgot to take the backup and tried to partition the hard disk using EASEUS Partition manager then I got this error "0XC0000225"
lately Iv'e been having trouble booting my windows 7 and decided that it's time to upgrade, I bought a copy ofr windows 8 64-bit from microsoft and burned it onto a disk using the windows 7 usb/dvd downloader. I was doing all this from a 32-bit and thus applied the bootsect.exe as needed. When i boot from the disk, everything runs smoothly. I insert the required code and select custom install.
At this point, i select the partitiion and proceed. as the installation proceeeds, it does not apear if the first phase of installation does anything, even after 5 minutes it stays at 0%. after it finaly switches to the next part, I wait again for the next phase, but it only throws up a message "windows cannot install required files. make sure all files required for installation are available, and restart the installation. error code 0x8007048F"
After multiple attempts I decided to reinstall windows 7, but now I get the same error.
In Win Mail I keep getting this error code every time I try to send in receive on just one of my mail accounts. It is a .rr. account. I can send and receive, but I keeps filling my inbox with the same emails over and over. Almost like the emails haven't "cleared the server" and the server keeps sending me the same emails.
I have Windows 8.1 PRO x64bit SK (Slovakian Language Interface) + (Update 1) and Samsung Galaxy S3 GT-I9300 Android Ver. 4.3 Jelly Bean.
My problem is: Windows doesn't see my smartphone when I connect the USB cable to the phone and the computer. I dont have installed Samsung KIES , because i trying to install KIES SW yesterday, but I was wrong and kies phone absolutely not seen and not recognized.
Trying to update drivers SAMSUNG Electronics Co., Ltd. - Other hardware - SAMSUNG Mobile MTP Device and SAMSUNG Electronics Co., Ltd. - Other hardware - SAMSUNG Mobile USB Composite Device via device manager and nothing to do , i got error message this device driver was not recognized.
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacture.
Press Enter to try again Press F8 for Startup Settings Press Esc for UEFI Firmware settings
When I press Enter OR F8 screen just flashes but nothing happens and I also tried to re-install windows 8, installation was successful but windows could not load but appeared that couldn't attempt the repairs.
I have a pc that which it's cpu is 64 bit base and in the past i installed windows xp x64.now i want to install windows 8.1. At first I tried to install windows 8.1 X64 but after installation it cannot boot and the error is :
After that i installed window 8.1 X32 and it works fine ,but I want to know why i cannot install x64 .i am trying to installing and troubleshooting of that on other pc that is exactly like mine. I cheked the cpu with core info and the result is :
Coreinfo v3.21 - Dump information on system CPU and memory topology Copyright (C) 2008-2013 Mark Russinovich Sysinternals - Windows Sysinternals: Documentation, downloads and additional resources
Intel(R) Xeon(TM) CPU 3.20GHz x86 Family 15 Model 4 Stepping 10, Genuine Intel
I am making applications with Live code in Windows 8 and when saving them as exe's they were launching then due to some bad code I had to end the explorer process and reboot my PC and now when I try to run these programs I get the error The application was unable to start correctly (0xc0000142). Click OK to close the application.I tried using sfc /scannow and it found errors but could not repair them.
I have uploaded the log file. With system restore as a last resort.
I am trying to download the windows 8.1 on a windows 8.0 Toshiba S855D-S5120Laptop. Laptop specs 2.3 APU A10 Quad Core, 700 Giga HDD, 8 Giga RAM, and graphic ATI 2 giga memory 1200 x 800 screen . The OS is the first edition of windows 8.0 and I had widows preview 8.1 on it downloaded from the windows store. When I download the windows 8.1 from the store, I get this error code 80240031 ( I looked up the error coded and it mean invalid file) at 50% file download. I have used the windows restore function to restore the laptop to windows 8.0 and still the windows update does not work. I have tried resetting setting to default factory settings and same thing happens with the download. I have also bought the window pro 8.1 pack and the same thing with the windows 8.1 it stops at 50% and same error code comes up. I have also done the WSReset.exe and no improvement. I have all of windows updates and still nothing I do is working.
Windows 8 Backup has been working fine for 12 months to an external Seagate USB hard drive.I'm now getting a "device not ready" message with error code 0x80070015 and the backup fails within 30 secs of starting. I've checked the drive for errors and there are no problems. I can read /write files to the external drive. There is ample spare space on the external drive to store the backup file. How to investigate and solve this problem.
I have been using Windows 8 Pro for about five months and running the backup utility for about four months with no major issues. I have used it to create a system image and scheduled to back up my data files weekly.
For the past two weeks I have been getting an error message "error code 0x80780049" along with a message that my files did not backup.
My backup is via esata to an external drive and as mentioned above this was working fine (I even tried a restore of a couple of files to prove it) but now it will not complete the backup. I even deleted the entire backup and started again from scratch but backup fails at about 50% completion. I have checked with windows defender and no viruses exist.
My computer came with pre-installed Windows 8 Single Language but I can't active it. I contacted Microsoft but they didn't response. My error code: 0xC004F074.
I have been trying to change my language all day but I cant seem to execute the command "dism /Online /Add-Package /PackagePath:C:lp.cab" in my command prompt. I get the above error. I have downloaded the language pack and put it in my root C drive and renamed it ip.cab
I have tried to start up my PC recently and I get the message that my boot system has failed due to the fact it's missing the file "BCD".
I have contacted the microsoft company to report this issue, no support without my product code, or a disc/USB with the windows 8 system on it.
I have none of these and yet my issue still remains. My PC has worked perfectly the day before I shut it down. I'm trying very hard to restore my system but all I can find of the ways to restore it is by clicking control panel, etc...
I cannot access my laptop's desktop all I get is this error message and options to enter the setup utilities, firmware and boot options.
In all I'm asking for is, is there a way to restore my system from any of these options or is this another toss away laptop because windows 8 has failed to find this missing file?
I cannot get a replacement because I do not have the key with me that was used to install the operating system. This is all very frustrating and not to mention my job relies on this computer so it's putting everything to risk with my situation right now.
I purchased a new laptop last week: Lenovo G500.it has Windows 8 pre-installed.at present i am still using the pre-installed McAfee Internet security programme for my AV;i have successfully done all updates(which are set to automatic)
However-despite 5 attempts to free upgrade to 8.1 i am still getting the Error Code 0x80072ee2 message and installation fails. on checking this out i am finding 'fixes' but these require installation of 'repair tool' type applications(only operable if bought etc).
I have Windows 8.0 and I keep getting this message while trying to update the video app from the Windows Store. Is there any way to solve this problem and download the update to this app?...or Is there another app I can use to replace the video app?
I got a speed camera detector thing for Xmas. I've downloaded the software for the device and when I plug the device in, the software doesn't detect it. The manufacturer sent me an email with a link to download and install the driver. The driver installed, but it still doesn't work. When I looked at the driver status in device manager, it says...
This device cannot start. (Code 10)
{Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operation.
After the most recent update from Windows Store for Windows 8.1 Pro, my Intel Wireless drivers got busted. I could only connect to the Internet via the Ethernet cable and no matter how hard I try re-installing/uninstalling the drivers for the wireless drivers, I still get the same outcome.
In Device Manger, I checked the listing for Intel PRO/Wireless 3945ABG Network Connection.In the Properties menu, I get this message:
This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system.
I went to install software from Intel's website for diagnosing the wireless driver/connection status, so I ran Intel PROSet/WIreless Tools, and after clicking Diagnose > Run Tests for Hardware Test, I get this message:
Wireless Hardware is not bound to transport driver. My wi-fi switch on the left side of my laptop is already turned on. I switched it off, uninstalled and deleted the driver and restarted the laptop to see if I could reinstall. Upon turning back the switch on after logging into my Windows account, I still get the same outcome: code 12.
