Network / Sharing :: Convert NAS Drive From FAT32 To NTFS
Oct 29, 2013How to convert an old FAT32 NAS drive to NTFS without losing the data on it?
convert z: /fs:ntfs gives error message cannot convert network drive.
How to convert an old FAT32 NAS drive to NTFS without losing the data on it?
convert z: /fs:ntfs gives error message cannot convert network drive.
It is a 64 GB Toshiba USB drive (TNU). Problem is that every time I try to format to NTFS the normal way with Windows 7 or Windows 8 I get the message: Windows was unable to complete the format.
I tried to format it using the specific software from the drive manufacturer, TNA.
A friend managed to format it to FAT32, but the next time I tried to access the drive Windows showed a message saying that I needed to format the drive to use it. Then there appeared only the exFAT option.
I also tried some partition software, like AOMEI Partition Assistant Standard Edition, and it could format to both FAT32 and NTFS, but when I removed and put the USB drive back Windows again warned me about the need to format and again I had only the exFAT option left.
(Or how to remove Write Protection from Pendrive). Pendrive doesn't have any write protection lock key on it.
View 1 Replies View RelatedI purchased a new SSD drive for running windows 8, while installing I unplugged all of my other drives in my machine including a WD 2TB drive I use for files. I cannot seem to get the Windows 8 installation to be able to access the drive when I select it it says "F: is not accessible. Access is denied" after following the instructions below. The drive is recognized by the machine still, I just cannot access it from this Windows 8 partition?
"Access Denied" or other errors when accessing or working with files and folders in Windows
Long press the folder you want to take ownership of, then tap Properties.(If you are using a mouse, right click the folder, then click Properties.)Tap or click the Security tab, tap or click Advanced, then tap or click Change.Tap or click Edit. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.Type the name of the person you want to give ownership to and click Check Names.The person that you're giving ownership will have their account displayed in the box, click OK.If you want that person to be the owner of files and subfolders in this folder, select the Replace owner on subcontainers and objects check box.Click OK.
i'm using Windows 8 Home 64 Bit.
I used AOMEI Partition Assistant Standard to add a NTFS Partition to my USB drive. I want to store large files over 4GB on this partition, while having the rest of my files on the primary partition which is FAT32. The problem is, when I plug my drive into the computer it only shows the primary partition.
Is there any way to get Windows to show both partitions when I plug the device in? I want to be able to store files on both partitions.
After doing some research, I found that one possible way would be to set the USB device as a "Fixed disk". I was unable to figure out how to do this.
The device is a 32GB Silicon Power Blaze Removable Disk with USB 3.0.
I want to backup my photos from my computer's D: drive to OneDrive. But when I start to upload them, it says those photos are also available offline. That means, all photos uploaded from my D: drive are also copied to my C: drive. But it wastes my space on the C: drive. All my settings are set to upload photos with online access only. I tried to delete the copied photos from my C: drive but it also deleted them from OneDrive. Is it possible to upload only to OneDrive without copying the photos to C: drive?
View 1 Replies View Relatedwindows 8.0
I was happily using file history, it was backing up to my G partition, which is located on my second hard drive (both drives are internal)but now I get error message:
I think the problem is that this partition got added to my user, that's what the network path shows:
How do I get it out of my user, and back on a normal path?
I have 2 PC's. Both are now running Windows 8. The main PC was running Windows 7 and I there mapped a network drive (z to the Windows 8 PC. It worked very nice. The second PC was also shown in "networks" in "my Computer" right after boot of Main PC. So network for sharing is set up properly on second PC.
After installing Windows 8 on main PC, it is still working, but the time spend waiting for the network drive is waaaaay longer now. The name of second PC "Photo-PC", is shown right after boot, but when I first click on the name, and get this error:
Networkpath not found. Errorcode 0x80070035
If I then wait about 20-30 seconds and then click again on "Photo-PC" then I have access to all shared drives, included my mapped network drive Z:
How can I eliminate this 20-30 seconds delay after boot?
I have given up setting up a homegroup, never had it to work, but "oldfashioned" network drives used to work
I upgraded to Windows 8.1 from Windows 8 and I can no longer see the files inside the folders on my networked drive. Before I upgraded I could see them, after the upgrade - not so much. The folders are fine, I can see them, just no files visible. There's no network issues as the files are visible from my Win7 machines and my wife's Windows 8 machine. All the standard default sharing and viewing settings are correct. Even if I put the direct path in File Explorer is tells me there's nothing there. I'm absolutely baffled. I have never seen this particular type of sharing issue before. I'm a pretty savvy Network Admin so the basic troubleshooting (and standard sharing settings) has been covered.
View 6 Replies View RelatedI'm trying to map my box.com cloud storage using "Map Network Drive".
I found the "Map Network Drive" button at the top of my folder. I click on "Connect to a Web site that you can use to store your documents and pictures". I follow through "Choose a custom network location"
At "Internet or network address" I type the url where I would log into box through the internet: [URL] .....
At next I get the login prompt, so I login, clicking "Remember my credentials" , when it returns, indicating that my login is incorrect the number of letters in my password has doubled, so of course my password is incorrect if the "network drive" is adding a bunch of extra characters.
So I go back and click on "connect using different credentials" and get the same result ....
I was wondering if it was possible to share an internal hard drive over the homegroup network or any other possible way that I can view video files on it on my tv?
View 1 Replies View RelatedHow to index files from network drive to Libraries (ex. Music, Photos, Etc.)?
View 1 Replies View RelatedI am trying to find a solution to transferring large files (100+GB) between myself and a client of mine at a different location through the internet. The easiest one I have found was through a Private Network through Logmein's Hamachi, as you can browse other connected computers' files through this network.
Of course, to show the shared drives by the host computer, you need to input a username and password through the UAC. Obviously, if I insert my own username and password, I can see the folders I've shared. However, how do I configure a username/password for my client? Are these users the same as local users? I would like to avoid having to make a local user for him on my own computer.
Just for reference, I have no control over my network I am connected to, so no FTP, no port forwarding etc.
OS: Windows 8.1
I have two computers on a large desk side by side. Both are running Windows 8.1
I have a drive on computer A which I want to be able to access on computer B.
I have gone into advanced sharing for the drive and enabled sharing. However, when I go to map the drive on computer B, I get an error that I don't have permission to access that drive.
What am i missing here? Neither computers are using logins/passwords for the admin user account.
Been having trouble this morning with my network drive in my Home Server. It normally connects fine at startup and it all of a sudden wont work.
I have isolated it to my Desktop as i can connect off of my Laptop fine.
The name of my server is Homeserver(192.168.1.77) and I have shared a folder inside the drive rather than the drive its self. This image shows how I'm trying to connect to the folder. And this is the error I'm getting
I have tried:
Resetting ip / dns flushing etc.
sfc /scannow (Says everything is fine.)
Windows 8.1: files in folders on network drive not visible
W2K3 Server can access W8 W8 computer cant see W2K server
Also tried disabling norton on my desktop but still wont work
I can add and use files from a laptop I have on windows 7. However on my desktop running windows 8, I cannot add files to the hard drives attached to my network.
I currently have the Western Digital N700 router, with 1 3 tb backup drive attached.
I can get videos from it or other files, however I cannot add. When I go to drag and drop I am getting the circle with a / through it.
Its difficult to have to use a different computer to upload files.
I use a network hard drive connected to my router for media storage, and it never had any problems when I ran Windows 7. I recently upgraded one PC to Windows 8, and now that PC cannot connect to the network drive. The drive does not show up under "Network" in the explorer sidebar.
It still shows up as a mapped drive under "Network Locations," (which was set up before the upgrade) but Windows 8 sees it as Offline. The drive still works perfectly with the other PCs in the house (all of which still run Windows 7), so it definitely seems to be a problem with 8. What might have changed between 7 and 8 that is preventing the PC from seeing the network drive?
Edit: It may add that all of the PCs and the network drive are connected to the router via ethernet cable (in other words, it's not a wifi issue), and the Windows 8 PC can see the other PCs on the network with no problem.
I am trying to map a drive on a Windows 8 computer.
I can locate the Windows 8 computer and the drive but when it tries to open the connection it says.
z: is not accessable. Access is denied.
I have done the following:
firewall off
antivirus off
shared drive
using WORKGROUP
turned in network discovery and file sharing.
interestingly I can get access to the Userspublic folder
I have an HP elite 64 bit on Windows Pro. I also have an Imac 64 bit etc.
I used to be able to access my c drive from the imac, now I cannot. It says I cannot access the folder because of permissions. I have full control to all, and I have all sharing turned on in Windows and the Mac. What could be causing this if the drive is shared? Like I said, I used to be able to do it fine, I can see it and there are certain files within the c drive I CAN access but nothing that I NEED to access. What is accessible now is more "public". I can see and access my externals as well it is just the C drive that is tossing the error.
I have a Sony Vaio connected by Wi-Fi to a BT home hub, which has two NAS drives connected to it by Ethernet.
I deleted all media files photos, videos, mp3s off the Vaio to save disc space, with the intent of accessing them off one of the NAS drives.
Problem is, Windows 8.1 photo app is not locating them. Music app neither. Seems to only be looking locally and at Skydrive.
Yet if I go to Windows media player it finds them on the NAS and builds a library of mp3s.
Drive is properly mapped as a network drive and browsable in file explorer.
Is there something I need to set in the apps, or is it an app limitation?
I'm trying to map a Verbatim Desktop External NAS Drive. In my Network folder, I right-click on the drive and select the Map Network Drive option. This opens a dialog box where I select a Drive letter of my choice. After clicking Finish I'm prompted with a Windows Security dialog box with Username / Password fields. I enter them using my MS Account credentials but I get an 'Access is denied' error. Screen shot attached.
View 9 Replies View RelatedI'm setting up a little media center (running Win 7) to connect to my TV. I was thinking about sharing one of the drives on the media center so I can access it from all my computers and put pictures, music and movies on it as needed.
I went to Advanced Sharing, checked the Share this folder box and put full control on Everyone. Nevertheless I'm getting an error when I'm trying to access the drive from my laptop (which is running 8.1). Says that Windows cannot access the drive. I have disabled password protections and all that but still nothing.
It does seem however that if I create a folder inside the Media center drive and share it then I can access it with no problems and add files and do what I want.
Perhaps that is what I'll need to do to bypass the problem? But is there anyway I can access a shared drive? What else to try?
I was trying to share my c drive to my network and took it too far. I ended up changing permissions and now I cant access the c drive or any program, I am locked out. What now ???
View 3 Replies View RelatedI can ping our work server (windows 8 server) as well as connect to it using a remote desktop connection, it just won't map as a network drive.
I had this problem a few days ago, so I tried everything I could think of (dns flush, ip config release/renew, restarting, disconnecting from network drive & re-mapping) and nothing would let me back on. I did a system restore to 2 weeks ago and it works again. So of course then windows wants to do its updates, I let the updates happen and the problem returns.
It seems like the windows updates are the root of the problem. For now I'll have to restore to before the updates & turn off the updates.
I'm on a domain enviroment running on Windows 2008 R2 domain controller, I've just updated my laptop with Windows 8 Pro ( al other PC here are still Windows 7 ) and I'm facing a litle issue with GPO drive maps.
I have many Drive maps object affected to my users that work fines, the problem I have is when I disconect my laptop from the network and reboot, all network drive disappears and I don't have access to any of my "offline" files on those drives.
I can't create a simple text file and place it on my C: drive in Win 8.1 - says that I don't have permission. The properties of the drive show that I do - full control, every class of user. Am I missing something really simple?
View 1 Replies View RelatedEverything I can find to get round this problem involves right clicking on the HD->properties->Security->Owner and then going on to changing a few settings.
There is no owner tab! Is this an 8.1 thing? Have they removed it? Van I get it back?
When i attempt to share any of my drives (physical or virtual) on my Win 8.1 machine I receive a message, "This drive cannot be shared". This machine is a member of a Homegroup and I have read access to/from this machine.
As I am attempting to share a drive I am using advanced share and have included homegroup users in the list I want to share to.
I have now managed to share the drives on the Win 8 machine, however when i look at Homegroup in Windows explorer I can see the shared drives of the Win 7 machines but when I click on them it says I don't have permission despite having put Homeusers in the permissions list of both the sharing tab and permissions tab of Shared Drive/properties.
I found that my two Windows 8.1 laptops will not copy the entire contents of any folder to my Iomega network drive. Only the folder alone is copied and none of the sub-folders or individual files. I can copy individual files separately, but not the whole folder sub-folder, and files together. I have no problem doing this with my Windows 7 desktop PCs. My network drive is connected directly to my Apple Airport Base Station router.
View 4 Replies View RelatedRecently upgraded from Windows 8 to Windows 8.1
I have a Synology NAS, Mapped as P: on my computer.
I can see the P: in Windows Explorer. However, in several applications. Most notably Photoshop CC, After Effects CC and 3ds Max 2013. The P: is not accessible from the open dialogue box. Nor can i enter the path manually.
Windows Explorer:
Photoshop CC:
3ds Max 2013:
windows 2008 R2 server, win 7 and win 8.1 wkstations.
For one domain admin user only, when he logs in he sees normal mapped drives. The longer he's working, he starts seeing more and more letters mapped to the same particular network share. So after a few hours he'll have 12 drive letters all mapped to the same network share.
Doesn't matter what workstation. Doesn't seem to be a particular application.