I am trying to map a drive on a Windows 8 computer.
I can locate the Windows 8 computer and the drive but when it tries to open the connection it says.
z: is not accessable. Access is denied.
I have done the following:
firewall off
antivirus off
shared drive
using WORKGROUP
turned in network discovery and file sharing.
interestingly I can get access to the Userspublic folder
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so:
- WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar.
- Under the wired network properties IP Version 4, I manually set addresses to be
IP 192.168.10.1
Subnet 255.255.255.0
Gateway 0.0.0.0
Laptop B has only a wired network, set to
IP 192.168.10.2
Subnet 255.255.255.0
Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
It was working earlier but couple of hours later when I booted up my Windows 8 laptop.. There was a red x on the network I was trying to connect to and a message saying my computer settings not matching.
I looked it up on youtube and I tried selecting "No authentication" and for encryption type I chose "None". But still didn't work.
Sometimes it would say limited first then when I try to reconnect the message above will appear.
I have a local network at home with 1 router, 5-6 computers and a few gadgets connected through WiFi.
I have a problem with one of the computers with Windows 8.1, let's call it Computer A. When I boot it, it is connectable from the other computers using its local IP address. But after a few hours it usually disappears from the network, and I'm only able to connect to it using the router's external IP and port forwarding.
By "disappears from the network", I mean that it's still connected to the router and to the internet, but none of the other units on the network is able to connect to it in any way.
Computer A can always connect to the the other computers on the network and to the internet.
The problem is solved if I reboot Computer A, so at the moment I have a scheduled task to reboot it every night. Unfortunately, sometimes it disappears from the local network after only a few hours after boot.
Turning the firewall off on Computer A doesn't work.
Below is the result of ipconfig /all on Computer A:
Code:
C:WINDOWSsystem32>ipconfig /allWindows IP Configuration
Host Name . . . . . . . . . . . . : bjarte-media2 Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : getinternet.noWireless LAN adapter Local Area Connection* 2: Media State . . . . . . . . . . . : Media disconnected
[Code] ......
Would it be possible to hide the 'Network Locations' in the 'My Computer' section in 8.1?
View 2 Replies View RelatedWindows 8.1x64 clean install from dvd. I have a private network configured as a Workgroup consisting of a W2000 photocopy machine,XP desktop, W7 desktop and laptop and now a Windows 8.1 desktop. During the initial installation I have files on the Windows 7 desktop I need so from Windows Explorer I clicked on the Windows 7 computer to gain access to the password shared folders and their files. I entered the User and Password info and clicked the "stay connnected" as I expected to reboot several times during this computers installation.
Everything worked just great UNTIL I no longer wanted the connection to the Windows 7 computer. On XP and even Windows 7 it was trivial to Disconnect a computer that I had established a share with.
However, on Windows 8.1 I cannot figure out how to do it. How do I disconnect the share with the Windows 7 computer?
This may seem trivial but I cannot figure it out. Obviously I can disconnect from the W7 computer but that computer is shared with others as well. And then the other computers would have to re-establish their shares. And, that would just be a work around.
I want to backup my photos from my computer's D: drive to OneDrive. But when I start to upload them, it says those photos are also available offline. That means, all photos uploaded from my D: drive are also copied to my C: drive. But it wastes my space on the C: drive. All my settings are set to upload photos with online access only. I tried to delete the copied photos from my C: drive but it also deleted them from OneDrive. Is it possible to upload only to OneDrive without copying the photos to C: drive?
View 1 Replies View Relatedwindows 8.0
I was happily using file history, it was backing up to my G partition, which is located on my second hard drive (both drives are internal)but now I get error message:
I think the problem is that this partition got added to my user, that's what the network path shows:
How do I get it out of my user, and back on a normal path?
I have 2 PC's. Both are now running Windows 8. The main PC was running Windows 7 and I there mapped a network drive (z to the Windows 8 PC. It worked very nice. The second PC was also shown in "networks" in "my Computer" right after boot of Main PC. So network for sharing is set up properly on second PC.
After installing Windows 8 on main PC, it is still working, but the time spend waiting for the network drive is waaaaay longer now. The name of second PC "Photo-PC", is shown right after boot, but when I first click on the name, and get this error:
Networkpath not found. Errorcode 0x80070035
If I then wait about 20-30 seconds and then click again on "Photo-PC" then I have access to all shared drives, included my mapped network drive Z:
How can I eliminate this 20-30 seconds delay after boot?
I have given up setting up a homegroup, never had it to work, but "oldfashioned" network drives used to work
I upgraded to Windows 8.1 from Windows 8 and I can no longer see the files inside the folders on my networked drive. Before I upgraded I could see them, after the upgrade - not so much. The folders are fine, I can see them, just no files visible. There's no network issues as the files are visible from my Win7 machines and my wife's Windows 8 machine. All the standard default sharing and viewing settings are correct. Even if I put the direct path in File Explorer is tells me there's nothing there. I'm absolutely baffled. I have never seen this particular type of sharing issue before. I'm a pretty savvy Network Admin so the basic troubleshooting (and standard sharing settings) has been covered.
View 6 Replies View RelatedI'm trying to map my box.com cloud storage using "Map Network Drive".
I found the "Map Network Drive" button at the top of my folder. I click on "Connect to a Web site that you can use to store your documents and pictures". I follow through "Choose a custom network location"
At "Internet or network address" I type the url where I would log into box through the internet: [URL] .....
At next I get the login prompt, so I login, clicking "Remember my credentials" , when it returns, indicating that my login is incorrect the number of letters in my password has doubled, so of course my password is incorrect if the "network drive" is adding a bunch of extra characters.
So I go back and click on "connect using different credentials" and get the same result ....
I was wondering if it was possible to share an internal hard drive over the homegroup network or any other possible way that I can view video files on it on my tv?
View 1 Replies View RelatedHow to index files from network drive to Libraries (ex. Music, Photos, Etc.)?
View 1 Replies View RelatedI am trying to find a solution to transferring large files (100+GB) between myself and a client of mine at a different location through the internet. The easiest one I have found was through a Private Network through Logmein's Hamachi, as you can browse other connected computers' files through this network.
Of course, to show the shared drives by the host computer, you need to input a username and password through the UAC. Obviously, if I insert my own username and password, I can see the folders I've shared. However, how do I configure a username/password for my client? Are these users the same as local users? I would like to avoid having to make a local user for him on my own computer.
Just for reference, I have no control over my network I am connected to, so no FTP, no port forwarding etc.
OS: Windows 8.1
I have two computers on a large desk side by side. Both are running Windows 8.1
I have a drive on computer A which I want to be able to access on computer B.
I have gone into advanced sharing for the drive and enabled sharing. However, when I go to map the drive on computer B, I get an error that I don't have permission to access that drive.
What am i missing here? Neither computers are using logins/passwords for the admin user account.
Been having trouble this morning with my network drive in my Home Server. It normally connects fine at startup and it all of a sudden wont work.
I have isolated it to my Desktop as i can connect off of my Laptop fine.
The name of my server is Homeserver(192.168.1.77) and I have shared a folder inside the drive rather than the drive its self. This image shows how I'm trying to connect to the folder. And this is the error I'm getting
I have tried:
Resetting ip / dns flushing etc.
sfc /scannow (Says everything is fine.)
Windows 8.1: files in folders on network drive not visible
W2K3 Server can access W8 W8 computer cant see W2K server
Also tried disabling norton on my desktop but still wont work
I have an aunt who runs a business who wants to be able to let the computer run over night at her business and let me access it remotely to do the usual disk cleanup, defrag, virus scans and backups. Currently I have to go on Sundays to do all this and it is just a pain to sit there and wait for the task to complete. I did have some of these automated but some how under the computer illiterate they always get messed up.
Is there a piece of software (preferably free) that will let me access her machine to do all this? It doesn't matter if I need her on the other end to grant me permission to access the machine but I would rather do this from home during the night then do all this on a Sunday.
It just occurred to me that I don't know how this works.
When I share files, are they transferred via my router, the internet, directly computer to computer, black magic?
I have a USB printer connected to an 8.1 system. This printer is shared. I don't like keeping the computer on 24/7 so I set it to sleep.
Is there a way to send a wake command to the system when I want to print? WOL is working on the system. I noticed Homegroup has the option to wake the computer to view shares (and that does work).
If I can't wake the computer before a print job, what is the best practice to conserve energy on a system that is primary used as a print server?
I fix computers when they get a virus etc. and want to be able to connect their computers to my home network while at the same time ring fencing their computer so that they can only access the internet (for updates and virus definitions).
I want to be able to prevent their machine from seeing and interacting with my computer and other "trusted" machines and devices on my network and I want all of my machines (Windows 8.1 and Windows 7) from having their media sharing services and shared folders etc. popping up in my machines.
I understand that I can setup VLAN's for this purpose but sadly my router Netgear DG834GT does not have VLANS.
I have two Windows 8 computers. On one of them (which says "private network"), I easily created a homegroup. On the other (which also says "private network"), I am unable to join the homegroup. Whenever I connect to the network, it searches and says "There is no homegroup on this network" and displays "Create Homegroup" in the Network and Sharing Center. However, when I attempt to create the homegroup, it says "Can't create a homegroup on this computer". If I leave the homegroup on the working computer, it still says "Create Homegroup" in the Network and Sharing Center and I am still unable to create the homegroup. Microsoft has worked on this for five hours and is unable to find a solution.
View 7 Replies View RelatedWe are upgrading our office to windows 8, but 1 computer is hardly ever used and is running XP. It will stay with XP, and should not be allowed to go online for security reasons.
All computers are networked, and share printers thru a netgear vpn router. Of cause they all can go online. Question: How can I prevent the XP computer from going online?
I opened the netgear router settings ( http://192.168.0.1 ), but can not find any setting blocking a computer from going on line.
I have a netgeat WNDR4500, I also have readyshare cloud installed on my home pc (HP pavilion elite x64 Win 8 pro) I also have it on my work pc (windows 7 pro Lenovo). I cannot seem to access my shared folder when logging in to ready share, it shows my device, but never pulls the shared folder. Is there something in the port forwarding setting that I may need to change?
View 7 Replies View RelatedMy neighborhood shares a wi-fi connection. When some neighbors see my computer is connected to the network, they assume I'm awake and accepting visitors. I want to prevent my computer from appearing when you click on Network and all PC's and connected devices appear.
I'm running Windows 8. I opened a command prompt and entered net config server /hidden:yes and "the command was completed successfully". I then restarted my computer and logged onto the network, however my PC is still visible along with the other computers and devices connected to the network.
What additional steps must I take to accomplish this task?
"It's nobody's business when I'm awake and online" in Tacoma.
I can add and use files from a laptop I have on windows 7. However on my desktop running windows 8, I cannot add files to the hard drives attached to my network.
I currently have the Western Digital N700 router, with 1 3 tb backup drive attached.
I can get videos from it or other files, however I cannot add. When I go to drag and drop I am getting the circle with a / through it.
Its difficult to have to use a different computer to upload files.
I use a network hard drive connected to my router for media storage, and it never had any problems when I ran Windows 7. I recently upgraded one PC to Windows 8, and now that PC cannot connect to the network drive. The drive does not show up under "Network" in the explorer sidebar.
It still shows up as a mapped drive under "Network Locations," (which was set up before the upgrade) but Windows 8 sees it as Offline. The drive still works perfectly with the other PCs in the house (all of which still run Windows 7), so it definitely seems to be a problem with 8. What might have changed between 7 and 8 that is preventing the PC from seeing the network drive?
Edit: It may add that all of the PCs and the network drive are connected to the router via ethernet cable (in other words, it's not a wifi issue), and the Windows 8 PC can see the other PCs on the network with no problem.
I have to reconnect my Win 8.1 computer each time it's started,my Win 7 computers do not have this problem. Also my Canon G16 WiFi camera can connect to all my Win 7 systems but not to my Windows 8.1 the camera is not found. Windows 8.1 has been a real bummer. Just glad I still have other computers running Win7.
View 1 Replies View RelatedCurrently I have a home network and need to do some rewiring but wanted to know if a software solution exists.
Right now I have the following setup
Code: +------+ +--------------+ +--------------------+ |Modem|----------->|Wi-Fi Router |+-------->|Desktop Computer| +------+ +--------------+ +--------------------+ + + | | | | +------+ | +-------------->|Server| v +------+ +----------------+ |Laptop Computer| (wifi atapter is OFF) +----------------+ + | v +---------------+ |Network Storage| (security storage computer NAS200) +---------------+
My laptop computer is the only computer has 2 NIC and thus I have set it up so that no other computers on my network can reach the network storage. I will be changing how things are wired together so that the network storage will now be connected through the Wi-Fi router, however I want to maintain the security of not allowing other computers on my network from reaching the network storage.
Is there a way that I can do this? Can I put the network storage computer on a different workgroup from the other computers? Can I have my laptop see 2 work groups so that it can see both the network storage and my home (unrestricted) LAN?
I am running windows 8 (not 8.1) x64 on all my computers. My router is a Linsys E4200.
Can a group of computers (20-25 Units), all running Windows 8 Single Language, share files, printers and an internet connection via a LAN? I need to make sure that the OS I will be getting with my new machines will be able to do this. The cheapest license I could get for this is the Windows 8 SL? Is if up for the job? I also have 2 switches, a router and my internet source is from a cable modem.
View 2 Replies View RelatedWhenever I boot up my computer, I always have to go and connect to the internet. It doesn't automatically connect to the internet. I don't want to do this anymore. I tried clicking "Connect Automatically," but that didn't solve the problem. I also tried troubleshooting. It found some problems, and it was the problems were fixed but it still doesn't work.
View 9 Replies View RelatedI have a Samsung Series 9 13in laptop running windows 8, and I'm attempting to stream video to my xbox 360 (it's one of the new, "slim" ones). I've read you need your homegroup set up in order to facilitate this, but I'm having nothing but trouble with it.
When I try to change any settings on the homegroup, most of the settings are greyed out, and the ones a can change reset as soon as I do it.
Screenshot is here: [URL] ....
How do I enable these settings? Any tips for streaming from Windows 8 to xbox?