Can a group of computers (20-25 Units), all running Windows 8 Single Language, share files, printers and an internet connection via a LAN? I need to make sure that the OS I will be getting with my new machines will be able to do this. The cheapest license I could get for this is the Windows 8 SL? Is if up for the job? I also have 2 switches, a router and my internet source is from a cable modem.
View 2 RepliesI bought the sony laptop with single language pack. The OS language is in spanish. I need to change the language to english. How to change the OS language in single language windows 8.
View 1 Replies View RelatedMy laptop Vaio is running windows 8.1 single language and I want to renew install it. But recovery in lap is windows 8 with i just want install drive C and keep my files on other drive.
View 3 Replies View RelatedI want to know how to upgrade Windows 8 single language to Windows 8 Professional, what is the way? Should I use third party program or not? I don't know.
View 3 Replies View RelatedI only have a Windows 8 Single Language key purchased. They mostly sell that version in my country. But I need to perform a clean install of Windows 8.1. How can I do this? How to get the ISO? I can't install 8.1 PRO ISO with a generic key and they use the SL key to activate right?
View 6 Replies View RelatedI maked Windows 8.0 Single Language EN-US ISOs (x86 and x64) from RU-RU ISOs (I removed Russian and added English).
When I try to install it in VMware Workstation (I tried x86, then I tried x64), on a half installation on both installations it says error: Windows could not see the offline locale information. Error code: 0x80000001.
I not maked any mistakes while making ISOs.
I only have a Windows 8 Single Language key purchased. They mostly sell that version in my country. But I need to perform a clean install of Windows 8.1. How can I do this? How to get the ISO? I can't install 8.1 PRO ISO with a generic key and they use the SL key to activate right?
View 5 Replies View RelatedCan a Windows 8.1 Single Language key be used to activate a Windows 8.1 Core?
View 2 Replies View RelatedI've got a problem with Windows 8.1 Single Language Edition 64-bit (English/Russian/Ukrainian).
When Windows 8 updated to 8.1 last year through the Store, I lost the ability to Restore and Refresh (a feature I had used several times previously).
Since then I have been using the same installation of 8.1, and it has finally become too laggy and bloated and I need desperately to Restore (files are all backed up and removed from computer, ready for Restore).
Things I have tried already:
- Found my Product Key using a keyfind program. My version of 8.1 came preintalled on the laptop, no DVD case, or e-mails with Key.
- Made a recovery USB Flash Drive (my laptop doesn't have a DVD drive). Recovery drive works when I boot from BIOS, but says it is invalid when I try to Restore.
- Tried to download an official ISO file from Microsoft, but the site says my Product Key is invalid (its not invalid).
- Tried using the Enterprise Trial ISO to Restore, and am now stuck with an expired trial copy of Enterprise.
I still have the Recovery Partition, and didn't delete it when I made the Recovery USB.
My computer is an ASUS Zenbook prime UX31A. All I want is to Restore. Even if its back to Win 8. I do not understand why all options seem to be broken since the update to 8.1. It seems intentional.
I want to Restore legitimately, and use the product I bought legitimately. But if this continues I may have to seek "alternatives".
while i am trying to update my windows 8 single language from the windows store after downloading all the important updates then also it provide this kind of error. here by i am adding the screenshot of the error message. i have also disable antiviruss and firewall
View 2 Replies View RelatedI just bought this Sony VAIO Fit 15a and i play fps games like League of Legends, Dota2 and COD4:MW and at the first ten or so minutes i play them smoothly but after that the fps will be halved and it seems like its lagging. I tried to play them all in lowest settings but the problem still persists.
Operating SystemWindows 8 Single Language 64-bit
CPU
Intel Core i3/i5/i7 4xxx @ 1.70GHz58
Haswell ULT 22nm Technology
RAM
4.00GB Single-Channel DDR3 @ 797MHz (11-11-11-28)
Motherboard
Sony Corporation VAIO (N/A)58
Graphics
Generic PnP Monitor (1920x1080@60Hz)
Intel HD Graphics Family (Sony)
Storage
465GB Western Digital WDC WD5000LPVX-55V0TT3 (SATA)41
Optical Drives
No optical disk drives detected
Audio
Realtek High Definition Audio
I have been trying to change my language all day but I cant seem to execute the command "dism /Online /Add-Package /PackagePath:C:lp.cab" in my command prompt. I get the above error. I have downloaded the language pack and put it in my root C drive and renamed it ip.cab
View 9 Replies View RelatedHow to activate Media Center in Windows 8.1 Single Language RTM Edition?
View 2 Replies View RelatedMost of the game i've installed are not compatible with my windows 8 single language. Of course my laptop's requirements are enough for the game but the problem lies within the windows 8. Are there any solutions to this matter ?
View 2 Replies View RelatedThis pops up sometimes on the desktop after I power on
Your PC RAN into a problem:
C:WindowsMinidump-40214-46000-01.dmp
C:WindowsMEMORY.DMP
C:UsersUserAppDataLocalTempWER-104406-0.sysdata.xml
It asked me to send details to windows and I sent. I don't know what's the problem and these are the only other problems I experienced:
1)Slower cold booting
2)It takes a longer time for the lights to off after shutting down. We can only turn the switch off after the lights off
Processor: Intel(R)Core(TM)i5-3337U CPU@1.80GHz 1.80GHz
Installed memory(RAM):6.00GB(5.89GB usable)
System Type:64-bit Operating System, x64-based processor
Recent PC activities:
1) Defragmentation for OS(C) and Data(D)
2) Installed and played The Sims 3 (usage is around 9GB) with Mods
3) OS(C) Disk Cleanup deleted items: Downloaded Program files, Temporary Internet files and Temporary files (not sure if I deleted System Error Memory Dump Files & System Error Minidump Files or not)
Windows 8 Pro memory dump error..after power ON..
Attached is SFdebugFiles.
I am comparing it with this:
8de6c80ded011b1a629f0228beed5bee5dbe27dd
It fails:
So does this means the ISO I have is tampered with? I don't feel safe installing Windows 8 from the ISO. I am now downloading a supposedly untouched russian ISO but where to download the English Language pack and how to replace it in the ISO while still keeping it a bootable ISO?
i am using an inspiron 14 with windows 8 single language (US English).
i recently downloaded a chinese music player from www.duomi.com and windows 8 is only displaying part of the chinese wordings in the software correctly, the rest are like alien characters.
image: [URL]...
What should I do?
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so:
- WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar.
- Under the wired network properties IP Version 4, I manually set addresses to be
IP 192.168.10.1
Subnet 255.255.255.0
Gateway 0.0.0.0
Laptop B has only a wired network, set to
IP 192.168.10.2
Subnet 255.255.255.0
Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
It was working earlier but couple of hours later when I booted up my Windows 8 laptop.. There was a red x on the network I was trying to connect to and a message saying my computer settings not matching.
I looked it up on youtube and I tried selecting "No authentication" and for encryption type I chose "None". But still didn't work.
Sometimes it would say limited first then when I try to reconnect the message above will appear.
I have a local network at home with 1 router, 5-6 computers and a few gadgets connected through WiFi.
I have a problem with one of the computers with Windows 8.1, let's call it Computer A. When I boot it, it is connectable from the other computers using its local IP address. But after a few hours it usually disappears from the network, and I'm only able to connect to it using the router's external IP and port forwarding.
By "disappears from the network", I mean that it's still connected to the router and to the internet, but none of the other units on the network is able to connect to it in any way.
Computer A can always connect to the the other computers on the network and to the internet.
The problem is solved if I reboot Computer A, so at the moment I have a scheduled task to reboot it every night. Unfortunately, sometimes it disappears from the local network after only a few hours after boot.
Turning the firewall off on Computer A doesn't work.
Below is the result of ipconfig /all on Computer A:
Code:
C:WINDOWSsystem32>ipconfig /allWindows IP Configuration
Host Name . . . . . . . . . . . . : bjarte-media2 Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : getinternet.noWireless LAN adapter Local Area Connection* 2: Media State . . . . . . . . . . . : Media disconnected
[Code] ......
Would it be possible to hide the 'Network Locations' in the 'My Computer' section in 8.1?
View 2 Replies View RelatedWindows 8.1x64 clean install from dvd. I have a private network configured as a Workgroup consisting of a W2000 photocopy machine,XP desktop, W7 desktop and laptop and now a Windows 8.1 desktop. During the initial installation I have files on the Windows 7 desktop I need so from Windows Explorer I clicked on the Windows 7 computer to gain access to the password shared folders and their files. I entered the User and Password info and clicked the "stay connnected" as I expected to reboot several times during this computers installation.
Everything worked just great UNTIL I no longer wanted the connection to the Windows 7 computer. On XP and even Windows 7 it was trivial to Disconnect a computer that I had established a share with.
However, on Windows 8.1 I cannot figure out how to do it. How do I disconnect the share with the Windows 7 computer?
This may seem trivial but I cannot figure it out. Obviously I can disconnect from the W7 computer but that computer is shared with others as well. And then the other computers would have to re-establish their shares. And, that would just be a work around.
Everytime I off this computer in 5pm, and open it in 8am it's changing the Language like this picture.
what I do is Recover my Computer using 'Automatic System Restore' to get back.
I have a Samsung Series 9 13in laptop running windows 8, and I'm attempting to stream video to my xbox 360 (it's one of the new, "slim" ones). I've read you need your homegroup set up in order to facilitate this, but I'm having nothing but trouble with it.
When I try to change any settings on the homegroup, most of the settings are greyed out, and the ones a can change reset as soon as I do it.
Screenshot is here: [URL] ....
How do I enable these settings? Any tips for streaming from Windows 8 to xbox?
My computer hard rive recently crashed and was sent off to manufacturer to be supposedly fixed. Once I got it back my internet connection was spotty. Internet explorer would often stop working. It got to a point that I could not connect tonetworks, I tried multiple networks. This occurred a week before I left the country and didn't have much time to look into it.
I am connecting to a network and only getting "limited connectivity". My iPhone and iPad are able to connect. I've spent a few hours playing with it and googling. I get the message "one or more network protocols are missing on this computer". When I check the network connections it says IPv4 Connectivity: No Internet Access. IPv6 Connectivity: No Internet Access.
I have Windows 8.
I have an Asus computer running windows 8. When I open the network connections I cant see the list of available networks. I see my own connection to the internet which is named Network but that is all I see. when I check it on my laptop also running windows 8 I see a full list of available networks. Is there a setting in windows that will allow me to see this or is something blocking the list from being displayed.
View 5 Replies View RelatedI had to restart a computer on our office network which uses Windows XP on Wednesday, September 17, 2014. Now I cannot access a file on a computer which uses Windows 8 unless I tell the Windows 8 computer to let EVERYONE access the file - which I don't want to do. A computer using Windows Vista on the same network has had no problems. I've created a new username on the Windows 8 computer and given the problem computer that name but still no access. I've enabled read/write file sharing and given the problem computer full access permissions but still can't get in. I removed all Microsoft updates that had been installed four days before the problem occurred on the Windows 8 computer and recovered the Windows XP system to the day before the problem occurred - still can't get in.
View 3 Replies View RelatedI've had a home network with a Windosw7 PC, sometimes a windows 7 laptop, an Imac, and 2 Mac Powerbooks. I never did anything special to set up a network, I just connected them all to the router. I also have a network printer, a Cannon, which they all print to.
I added a new Windows 8 computer and during the set up process added the printer connection. After doing that, none of the other computers could print to the printer, they all got a "printer offline message. So I deleted it from the Windows 8 profile and it worked for the others again.
Is there a way to set up the printer for the windows 8 computer without cutting off the others?
Also, I'd like to homeshare the two windows 7 and the windows 8 computers, is there a way to do that and have networking still with the MAC computers - I'm particularly concerned with the printer. We don't really need to share files between the macs and pcs.
connecting my mac book pro/ windows laptop to My main computer and everything on it. I've never had 2 computers in the same house before. I use my Windows 8.1 for everything, but there are times when I'm somewhere else in the house where I'd like to access anything/everything on it. I have Wifi AC through a dlink router. I also have wired ethernet through the house. Thats not the problem, just how to connect the main computer to every other computer in the house either wifi or wired. If I'm out in the garage and I want to see my desktop computer on my mac book pro how can I do it. Also... I installed splashtop on each computer, but haven't figured it out if its the right software. I guess I need the right words to make the questions I have ask understandable for everyone.
Simply put I want to be able to access my Mac book pro and my Android S3 phone to be able to access everything on my desktop computer.
I've been having a network problem since Refreshing Windows 8.1 Pro Update 64 bit on one of my PC's. I've been able to see other PC's OK but unable to see some devices (eg Diskstation NAS etc) on my network (all connected using Ethernet cables).
I've tried all sorts of things to cure the problem and all to no avail.
I just noticed that in Services there was no Computer Browser so I guess this is my problem. I copied over the browser.dll file from another PC (using the same operating system) to the Windows/System32 folder but after a reboot there was still no Computer Browser in Services. I ran a couple of scripts I found, a registry hack and something else to restore the Computer Browser then I uninstalled the Client for Microsoft Networks, rebooted and re-installed the client.
Now when I look in Services it's listed as Browser instead of Computer Browser and in the Description column it says "Failed to read description. Error Code: 15100. The error code has now changed to error code 2.
What I can try next other than a clean re-install?
I am trying to map a drive on a Windows 8 computer.
I can locate the Windows 8 computer and the drive but when it tries to open the connection it says.
z: is not accessable. Access is denied.
I have done the following:
firewall off
antivirus off
shared drive
using WORKGROUP
turned in network discovery and file sharing.
interestingly I can get access to the Userspublic folder