Network / Sharing :: How To Access Computer Remotely
Jan 29, 2014
I have an aunt who runs a business who wants to be able to let the computer run over night at her business and let me access it remotely to do the usual disk cleanup, defrag, virus scans and backups. Currently I have to go on Sundays to do all this and it is just a pain to sit there and wait for the task to complete. I did have some of these automated but some how under the computer illiterate they always get messed up.
Is there a piece of software (preferably free) that will let me access her machine to do all this? It doesn't matter if I need her on the other end to grant me permission to access the machine but I would rather do this from home during the night then do all this on a Sunday.
View 3 Replies
ADVERTISEMENT
Aug 22, 2014
If I connect to my VPN on my laptop as a remote dial in user from a remote location it works fine. I can access my IP camera and Dreambox satellite receiver by just typing in their fixed local IP addresses in my browser.
I can ping my desktop PC, BUT, I cannot access my LAN. Normally at home my laptop and PC connect on the Windows network automatically. I need to be able to access the PC on the VPN when away from home in the same way.
I have a fixed IP address with my ISP. Other fixed IPs are:
Router IP 192.168.75.1
LAPTOP 192.168.75.13
PC 192.168.75.19
I have tried the Windows and Draytek VPN clients with the same results. I have ZoneAlarm firewall but the problem is the same if I disable it. Antivurus is AVG Free on laptop and Avast Free on desktop.
View 1 Replies
View Related
Nov 13, 2013
I need to be able to access my cousin's new Windows 8 laptop remotely so that I can support her in the use of her computer.
She is not computer savvy and gets nervous when things don't work smoothly.
I have a Win XP/pro laptop and don't plan on upgrading to Windows 8 until my great Toshiba laptop dies!
Is it possible for me to accomplish the above task?
She is in Nevada and I am in Connecticut. I will be flying out to Nevada to work with her get set up.
We haven't yet purchased her new computer (he old one is 10 years old).
View 1 Replies
View Related
Jun 29, 2014
without the likes of logmein?If I enable remote login on my pc, what needs to be done in my router (if anything) so I can remote in from wherever I want? I am running Windows 8.1 pro X64 router is netgear R6300
View 7 Replies
View Related
Feb 6, 2014
I was wondering if its possible to boot windows 8.1 remotely.
I know in previous versions of Windows, you can send a magic package and use the WOL feature, however as far as I know this doesn't work with windows 8 because of fast boot.
View 1 Replies
View Related
Sep 5, 2013
I'm running Windows 8, (unfortunately), & I can't access certain files even though I'm the only one who uses this laptop & I'm also the Administrator. I tried numerous times to allow file sharing & change what I thought I should, but I kept getting red-lettered statements saying that I'm not allowed to make such changes.what steps to take so I can get to the files I need. There's no reason why I should be denied access to do anything when it's my own computer!
View 9 Replies
View Related
Sep 15, 2014
I had to restart a computer on our office network which uses Windows XP on Wednesday, September 17, 2014. Now I cannot access a file on a computer which uses Windows 8 unless I tell the Windows 8 computer to let EVERYONE access the file - which I don't want to do. A computer using Windows Vista on the same network has had no problems. I've created a new username on the Windows 8 computer and given the problem computer that name but still no access. I've enabled read/write file sharing and given the problem computer full access permissions but still can't get in. I removed all Microsoft updates that had been installed four days before the problem occurred on the Windows 8 computer and recovered the Windows XP system to the day before the problem occurred - still can't get in.
View 3 Replies
View Related
Jan 15, 2013
Why does Windows Networking always seem to hose things up ( Linux works EVERY time)
I have two computers on the SAME test private LAN one Whitehorse (W2003 server) and the other Blackdog (Windows 8 Enterprise) both enabled "Shareable and Visible".
View from W2003 -- can see and access disks C,D, and F on Windows 8 Computer
View from Windows 8 - Networking shows the computer Whitehorse (W2003 server) but can't access any disks etc (or even its printer). PING even fails but Windows 8 obviously knows it's on the Network because its found it. The stupid Windows diagnostics when you click Diagnose doesn't work at all --in fact I've NEVER found the network diagnostic panel of the slightest bit of support ever.
I've switched off firewalls etc while testing so there's no security rubbish to take care of while I'm trying to get this to work. LAN is purely LOCAL -- no computer is on "the other side" of a router.
Both machines can access independently the Internet through a Local router and connections are via LAN cable so nothing should be simpler. !! But can I get this to work !!.
I had a similar problem with W7 but it seemed to "Disappear" without me actually doing anything -- the proverbial "Ghost in the Machine" I expect.
(Windows Networking Grrrhhhhhh! -- I'm not particularly technical with this stuff but any time I've used Networking with Linux it works STRAIGHT OUT OF THE BOX and there's no problem sharing from or to windows. !!)
Note -- Other W7 / Linux / XP computers connected to this SAME LAN (currently switched off) have NO problem accessing the server -- It's just this Windows 8 Machine (Windows 8 x-64 Enterprise version).
View 9 Replies
View Related
Feb 6, 2013
I am in the midst of the final steps in setting my my new Win 8 system.
I have a Win XP and Win 8 computer on my home network. I believe that I have set up file and printer sharing correctly. I can access the files and printer on the XP system from the Win 8 system. However, when I attempt to access the Win 8 files from the Win XP system, I get a long delay (about a minute or two) and then it asks me for the User Name & Password. I enter them and then and it works fine.
If I try to print on the printer attached to the Win 8 system from the XP system, I get a printer error unless I have already signed in with the ID & PW when accessing files. It never asks me for an ID & PW before attempting to print.
On the Win 8 system, I have selected "Turn off password protected sharing" in the "Network and Sharing Center/Advanced Sharing Settings".
The Win XP system has previously been correctly sharing files and printers with another XP system for some time and I haven't changed any settings on the XP computer.
Both the XP and Win 8 systems are assigned the same Workgroup name.
View 9 Replies
View Related
Aug 10, 2013
I just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies
View Related
May 10, 2014
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
View 6 Replies
View Related
Jun 27, 2014
How can i create local WIFI network without having internet access on my pc. This seems to work if I have access to internet but when i disconnect internet connection my PC ( virtual router ) cannot see anymore other devices..
All other devices that are connecting to my virtual hostednetwork are working without any problems expect my pc. What have i missed that my PC where virtual hostednetwork is running cannot see devices in "virtual" network without internet access?
View 3 Replies
View Related
May 3, 2013
As the title says, I'm getting a box saying "An unexpected error has occurred" whenever I try and access the properties window for my ethernet adapter. An unexpected power outage earlier in the day rendered my Windows 8 installation half messed up, leaving most of my drivers corrupt, so I had to attempt a refresh today, which solved most of my problems.
Unfortunately others like this have been cropping up since the refresh. I've looked for other possible solutions to this problem, and none have worked so far. Re-registering DLL files solved nothing, a system file check didn't do anything, and making sure I was in the correct user groups didn't solve anything either.
View 3 Replies
View Related
Apr 20, 2014
So I've some folders in my Desktop that I want to share with all the hosts in my network, so what i did was to create a new users and set all those folders only to read mode and, everytime I wanted to access the folders on those machines I simply access those folders via that user (in Windows hosts I just enter the network path like ip_addressfolder , windows then asks for the network password, I authenticate with that user and I have access to those folders.
The thing is that in my Surface RT (Windows RT -ARM), every time I try to access those folders via the method above (ip_addressfolder), I do see the folders, but when I double click on one of them in order to have access, instead of letting me authenticate, it simply returns the following error: Windows Cannot Access ip_addressfolder
Why is this so? Why doesn't Windows allow me to authenticate? Is this a limitation of the RT platform?
View 9 Replies
View Related
Jan 3, 2014
Since I changed the security parameters to my Linksys Wireless Router so my grandson could log in while visiting me on his laptop. I can't seem to be able to access my other computer on my home network. Enclosed is an "ipconfig/all" screenshot. I need to access my printer on my other printer which I was able to do prior to playing around with my router. All the diagnostics say more or less the same thing. They can "see" the computer but it isn't responding...
View 4 Replies
View Related
Feb 22, 2013
I just got a brand new Samsung Laptop for work. I dont know a ton about windows 8 either im fairly new to it. I work at a mental hospital doing security and we are allowed to have a laptop for over night shifts. I have an Alfa wireless antenna (cause i get low signal where im stationed) along with my normal laptop Wifi.
Heres the story. I was using my laptop antenna then out of no where it said "Identified Network (no internet access)" then my internet just stopped. I had this happen on my old laptop and it lasted a few days then worked like normal again. Then i switched to mt usb antenna and it worked fine for about 20 mins then all of a sudden it went it "Identified Network (no internet access)". So I was stuck with no internet. I tried looking up fixes on my ipod and i tried 3 Ways To Fix The Unidentified Network Error in Windows 8 and it didnt work I tried How To Fix Unidentified Network Windows - YouTube and it didn't work either. I'm dying here cause I have to sit in a room for 12 hours tonight with no way to keep my self from falling asleep or entertained.
View 1 Replies
View Related
Mar 9, 2013
This is a fairly new install of Windows 8 pro (within the last month), and while trying to set up a static ip up today I found that I was unable to access the network properties or disable the connection in the Network Connections. I am pretty stumped as I am the only user of this computer and from what I can tell have the correct permissions to do so. When trying to check the properties it tells me "an unexpected error has occurred" with no further information.
View 9 Replies
View Related
Apr 9, 2014
I installed the update for 8.1 (X64) but after the update i could not access my diskstation.
Pinging went fine. Accessing trough the webpage went fine.
But trying to access it with the explorer did not work. Not even when i tried it with the IP address.
After a system restore (before the update) everything works fine again. What settings are altered with the update? And why are settings altered in the first place. I will not use sky drive!
View 9 Replies
View Related
Dec 8, 2013
I use a USB modem in Windows 8.1 laptop. I want to share the internet to other devices by creating a hostednetwork. I used the netsh commands to create and start the hostednetwork. The wifi hotspot got created as 'Local area network connection *14. The internet from the USB modem was shared to Local area network connection *14. Other devices are able to connect to this and are getting IP address in the range of 192.168.137.X. The issue is that, the devices are not able to access internet. in troubleshooting this issue.
Don't give the instructions to create a hostednetwork or advice to use 'Virtual router plus'. I have already done all sorts of basic troubleshooting. Everything looks fine, but there is no internet connection to other devices.
I am able to share internet using the same USB modem with same method in Windows 7.
View 9 Replies
View Related
Feb 7, 2014
I have two pcs: an old desktop pc with windows xp and a notebook with windows 8.
Both computers are connected to the Internet through an adsl router and are also connected togheter, sharing files and folders through plain networking: HomeGroup would not work with windows xp.
Therefore, both computers are under the same workgroup, have different IP addresses and both share printers and folders.
I am able to log into my notebook [running windows 8] from my desktop pc [running windows xp] but not vice versa.
When my windows 8 machine prompts me for user name and password to log into my windows xp machine, my user name and password are not recognised.
I tried setting up the same user name with the same password on both machines, but whilst now I am able from my Windows XP machine to log directly into my Windows 8 machine, without entering user name and password, I am still receiving the 'The user name or password is incorrect' message from my windows 8 machine.
In both machine I installed Comodo Internet Security. I set up Comodo Firewall in my Windows XP machine to receive Remote Desktop connections.
Now I am able to connect to my XP machine from my Windows 8 machine via Remote Desktop. I am still unable to log into it from the Network folder, though.
View 3 Replies
View Related
Sep 15, 2014
I got this problem on my laptop Asus u38dt under Windows 8.1 a couple of months ago. It cannot connect to any network either via Wi-Fi or Ethernet (I tried an external USB Wi-Fi adapter as well, with the same result). In case of getting IP with DHCP, the network is shown as Unidentified network with no address assiged (IP is like 169.*). When static IP enabled, the network name is correct. But in both cases, connection is Limited and with No Internet access.
Connection can't be established with any router while other devices connect properly with them, so the problem is on the laptop side.
With all of this, any ping, even to 127.0.0.1, results in General failure.
When booted in Linux liveUSB, network works fine, so it is clearly not a hardware issue.
I tried resetting TCP/IP stack with "netsh int ip reset", reinstalling drivers, reinstalling the network adapter, and lots of other methods and still it doesn't work. Restoring system is not an option since I don't have any restoration point prior to the problem anymore.
View 9 Replies
View Related
Jun 16, 2013
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so:
- WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar.
- Under the wired network properties IP Version 4, I manually set addresses to be
IP 192.168.10.1
Subnet 255.255.255.0
Gateway 0.0.0.0
Laptop B has only a wired network, set to
IP 192.168.10.2
Subnet 255.255.255.0
Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
View 2 Replies
View Related
Aug 4, 2013
It was working earlier but couple of hours later when I booted up my Windows 8 laptop.. There was a red x on the network I was trying to connect to and a message saying my computer settings not matching.
I looked it up on youtube and I tried selecting "No authentication" and for encryption type I chose "None". But still didn't work.
Sometimes it would say limited first then when I try to reconnect the message above will appear.
View 1 Replies
View Related
Dec 9, 2013
I have a local network at home with 1 router, 5-6 computers and a few gadgets connected through WiFi.
I have a problem with one of the computers with Windows 8.1, let's call it Computer A. When I boot it, it is connectable from the other computers using its local IP address. But after a few hours it usually disappears from the network, and I'm only able to connect to it using the router's external IP and port forwarding.
By "disappears from the network", I mean that it's still connected to the router and to the internet, but none of the other units on the network is able to connect to it in any way.
Computer A can always connect to the the other computers on the network and to the internet.
The problem is solved if I reboot Computer A, so at the moment I have a scheduled task to reboot it every night. Unfortunately, sometimes it disappears from the local network after only a few hours after boot.
Turning the firewall off on Computer A doesn't work.
Below is the result of ipconfig /all on Computer A:
Code:
C:WINDOWSsystem32>ipconfig /allWindows IP Configuration
Host Name . . . . . . . . . . . . : bjarte-media2 Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : getinternet.noWireless LAN adapter Local Area Connection* 2: Media State . . . . . . . . . . . : Media disconnected
[Code] ......
View 9 Replies
View Related
Feb 10, 2013
I added an SSD and installed windows 8 on it. On my old HD now my E drive are all my documents music etc from before. I can access all folder with the exception of music. I get a message that I don't have permission to access this folder.
How can I gain access to it?
View 1 Replies
View Related
Apr 16, 2013
I have an HP elite 64 bit on Windows Pro. I also have an Imac 64 bit etc.
I used to be able to access my c drive from the imac, now I cannot. It says I cannot access the folder because of permissions. I have full control to all, and I have all sharing turned on in Windows and the Mac. What could be causing this if the drive is shared? Like I said, I used to be able to do it fine, I can see it and there are certain files within the c drive I CAN access but nothing that I NEED to access. What is accessible now is more "public". I can see and access my externals as well it is just the C drive that is tossing the error.
View 1 Replies
View Related
Apr 21, 2013
I have Windows 8 Pro and XP connected to the same router via Ethernet cable, XP can access files on Windows 8 Pro and place files in folders from Windows 8 and the files will appear in the folder in Windows 8, Windows 8 can see the XP computer but when I try to access it I get an error message saying "Windows can not access James ", the name of my XP computer.
View 4 Replies
View Related
Mar 28, 2013
I have 2 systems, 1 running Win7 (HP i5, quad-core, 8GB 2.5Ghz) and the other is running Win 8 (Acer AX series, AMD processor, quad-core, 8GB, 2.2Ghz) acting as my HTPC. How can I remotely access my Win 8 system (in living room) through my Win 7 PC in my computer room?
I've also read somewhere that using WOL feature on Win 8 is difficult. Is that true? How can I get through this issue?
View 4 Replies
View Related
Jan 4, 2014
Would it be possible to hide the 'Network Locations' in the 'My Computer' section in 8.1?
View 2 Replies
View Related
Dec 30, 2013
Windows 8.1x64 clean install from dvd. I have a private network configured as a Workgroup consisting of a W2000 photocopy machine,XP desktop, W7 desktop and laptop and now a Windows 8.1 desktop. During the initial installation I have files on the Windows 7 desktop I need so from Windows Explorer I clicked on the Windows 7 computer to gain access to the password shared folders and their files. I entered the User and Password info and clicked the "stay connnected" as I expected to reboot several times during this computers installation.
Everything worked just great UNTIL I no longer wanted the connection to the Windows 7 computer. On XP and even Windows 7 it was trivial to Disconnect a computer that I had established a share with.
However, on Windows 8.1 I cannot figure out how to do it. How do I disconnect the share with the Windows 7 computer?
This may seem trivial but I cannot figure it out. Obviously I can disconnect from the W7 computer but that computer is shared with others as well. And then the other computers would have to re-establish their shares. And, that would just be a work around.
View 1 Replies
View Related
Sep 1, 2013
Have two Windows 8 machines and one has a bunch of drives connected to it, that I use informally as a file server. Generally, what happens is the following:
1) Boot the Windows 8 "server" machine (Windows 8 pro, not a Server OS)
2) Boot my Windows 8 Pro desktop
3) Open file manager app, double-click the icon for the server PC -- and drive icons open
But sometimes, when I do 3), I get an error message saying that the machine name is incorrect (which it is NOT).
When I click Details on this to see what is wrong, it says "no issues" -- but still can't connect.
This is generally resolved by rebooting the "server" box (and trying again), or rebooting the desktop box (and trying again), or going through repeated reboots of each -- until a connection is finally made.
I've checked the sharing permissions on the "server" box and they are set as follows:
1) Each partition -- read by everyone (used by the desktops to download files)
2) Shared folder in each partition -- full control by everyone (used by the desktops to upload files)
And ... password-protected sharing is enabled, such that when a desktop first tries to connect, you must enter valid account info. After that, the info is saved and you don't have to enter it again.
I've gone through removing sharing and reapplying it several times, and there are no changes as a result. And it's always all-or-nothing, that is, it's never a situation where some of the shares can be seen/used but not others.
Problem is, there are times when I really need access to the "server" drives from the desktop and can't reboot either because something is going on that takes a long time and I don't want to have to restart it. I also run XP on this box (which never gave me these problems) -- and would really like NOT to go back to using XP.
View 8 Replies
View Related
