I was wondering if its possible to boot windows 8.1 remotely.
I know in previous versions of Windows, you can send a magic package and use the WOL feature, however as far as I know this doesn't work with windows 8 because of fast boot.
without the likes of logmein?If I enable remote login on my pc, what needs to be done in my router (if anything) so I can remote in from wherever I want? I am running Windows 8.1 pro X64 router is netgear R6300
View 7 Replies View Related I have an aunt who runs a business who wants to be able to let the computer run over night at her business and let me access it remotely to do the usual disk cleanup, defrag, virus scans and backups. Currently I have to go on Sundays to do all this and it is just a pain to sit there and wait for the task to complete. I did have some of these automated but some how under the computer illiterate they always get messed up.
Is there a piece of software (preferably free) that will let me access her machine to do all this? It doesn't matter if I need her on the other end to grant me permission to access the machine but I would rather do this from home during the night then do all this on a Sunday.
If I connect to my VPN on my laptop as a remote dial in user from a remote location it works fine. I can access my IP camera and Dreambox satellite receiver by just typing in their fixed local IP addresses in my browser.
I can ping my desktop PC, BUT, I cannot access my LAN. Normally at home my laptop and PC connect on the Windows network automatically. I need to be able to access the PC on the VPN when away from home in the same way.
I have a fixed IP address with my ISP. Other fixed IPs are:
Router IP 192.168.75.1
LAPTOP 192.168.75.13
PC 192.168.75.19
I have tried the Windows and Draytek VPN clients with the same results. I have ZoneAlarm firewall but the problem is the same if I disable it. Antivurus is AVG Free on laptop and Avast Free on desktop.
Unable to figure out a default setting.
Simply for the home desktop and want to share with other kit on the home network.
When I boot up it appears I have to always tweak the settings :
1) Control Panel > System > Change settings > Network ID and select under "Select the option that best describes your network" so I opt for I tick "this is a home computer; it's not part of a business network."
2 )The reboot.
All works fine and all devices can be seen and read/write in accordance with the appropriate share settings.
Now the issue is when I next reboot the
Control Panel > System > Change settings > Network ID and select under "Select the option that best describes your network" will default to "This computer is part of a business network; I use it to connect to other computers at work".
So I have to got through steps 1 and 2 again.
How to I get Windows 8.1 Pro x64 to default to the "this is a home computer; it's not part of a business network." on each boot without having to manual configure.
Could not reconnect all network drives error at boot? I get it most of the time with a wired Ethernet connection. I've done a lot of searching and tried different things but nothing seems to work. This started a few months ago, was not there initially with Windows 8, 8.1 or 8.1.1.
With XP, you could do this to fix it:
Control Panel
Folder Options
View
Uncheck "Automatically search for network folders and printers"
This is no longer an option in Windows 8 (I think it disappeared with Vista).
This is a boot up timing issue, registry fix for network comming up. I am on a wired LAN which works ok. However, recently when booting I am getting the message cannot connect to network drives - these are mapped drives to NAS boxes.
However, when I access the drives the 'red X's' change to the network symbol and access is working. Its seems the computer wants to connect before the network is up. It is not a credential issue, but boot order. Is there anyway to make the network come up before the computer wants to map to it. Not a problem but a nag.
I have a new Dell laptop with Windows 8.1 - I work from home & connect to the internet via my home wifi network. The problem I have been experiencing is that my laptop connects to the internet at boot up but then disconnects for several minutes & then re-connects again. This coincides with the Network & Sharing Centre showing a number of Local Area Connections (numbered 3,4,5,6 etc) being created under Unidentified Public Networks. I have tried disabling the LAC's but they re-enable whenever I re-boot & I have the same issues again. My networking knowledge is very limited so how to rectify this issue.
View 9 Replies View RelatedI've had this since I installed 8, but other little things kept me busy and since the PC is on all day, it's not been a big inconvenience, I would like to get it fixed however.
When I boot up the PC does not connect to the net.
When I trouble shoot it, it connects and gives the message
"ethernet" doesnt have a valid ip configuration fixed.
When remoting from a Windows 7 machine to a Windows 8 machine copy and paste do not function. I restarted the RDPClip service on both machines, this can be replicated on multiple machines (this is in work environment).
We are going to be deploying Windows 8 company-wide once we get little issues such as this sorted out. I'm curious whether something changed that might need to be implemented with our group policy. We did not have an issue with this before so it's definitely specific to OS.
The icon in the lower right of my desktop tells me that I have networks available, but is not currently connected. When I click it to open the little box that has the available networks listed, nothing happens other than the icon shading changing letting me know it actually has been clicked. No box opens. Ive tried restarting and even creating a new user, but nothing worked
I got the idea from my roommate to boot it in safe mode, which I did, but now I can't log in due to it asking me for a password that i dont use. I used a 4 digit pin to log in, and it's now asking me for a password. I've tried every password I can think of, but I can't get it, and there doesn't seem to be a "I forgot my password" option.
I need to be able to access my cousin's new Windows 8 laptop remotely so that I can support her in the use of her computer.
She is not computer savvy and gets nervous when things don't work smoothly.
I have a Win XP/pro laptop and don't plan on upgrading to Windows 8 until my great Toshiba laptop dies!
Is it possible for me to accomplish the above task?
She is in Nevada and I am in Connecticut. I will be flying out to Nevada to work with her get set up.
We haven't yet purchased her new computer (he old one is 10 years old).
I left my Dell Latitude 10 Tablet (Windows 8 x86) on the roof of my car ... and it wasn't there after returning from my short drive.
I know with Android you can remotely install applications and even out of the box you can just find the GPS location by going to the google play website.
Is there ANYTHING I can do now after the fact with Windows 8? Any way to remotely install, have microsoft track next time someone turns it on (since it's logged in via email address), or do anything?
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies View RelatedI am trying to share a specific folder on my Windows 8 computer with my Windows 7 computer. They are both on the same network connected to the same router. The Windows 8 computer is connected through ethernet, while the Windows 7 computer is connected wirelessly.
Here are my settings on my Windows 8 Computer:
This is the error I get on my Windows 7 computer:
What's up with this? On a related note, is it possible to share this folder with a specific PC, rather than "Everyone" on the network?
I am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
I've been trying to set up an old Savin 9033 printer through the company's router, but I couldn't find the network it's set up on from any other computer.
So I pull up Network & Sharing, see that Network Discovery is turned off.
I check it, go to click on "Save Changes" and nothing happens. I click it a few times and it kicks me back to the previous page, nothing saved. No password prompt or anything.
I double checked that all the appropriate services are running (DNS Client, SSDP Discovery, UPnP Device Host, Function Discoveryr Resource Publication, etc.) and made sure Network Discovery was allowed through Windows Firewall.
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
I am trying to get file sharing to work with my win 8 machine and my OS X Server. The computers are on the same network with the same workgroup but I can't seem to connect. I was able to connect with the wife's win 7 home machine until I upgraded it to win 7 Ultimate now it wont connect either.
View 1 Replies View RelatedOkay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
I would like to make a folder share from a tablet with windows 8 with password protected to a laptop of windows 7 and another of vista. I have followed the tutorial of File Sharing - "Share with" & "Stop Sharing" in Windows 8. My PCs have been set in the same workgroup and same user account, network discovery and file and printer sharing turned on. At the first time, it is OK for windows 7. However after some changes of account (delete and create them on both windows 8 and windows 7), it doesn't work anymore with the error from windows 7 "Login failure: user has not been granted the requested logon type at this computer" whenever password protected turned on in windows 8 and only OK when password turned off.
View 1 Replies View RelatedI just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies View RelatedI re-installed Windows 8 yesterday evening (thought it would be quicker than to cleanup and fix my old install) and then directly upgraded it to Windows 8.1. The problem I am experiencing is quite weird: The Operating System doesn't detect the network cable.
With that being said, do not jump straight to the "Did you turn it on and off again" questions. Here is what I have done so far:
Hardware-Side: Cross-check the cable with another computer --> Working fineCross-check the wall plug with another computer --> Working fineTest the connection with the BIOS's connection diagnostic utility --> Link detected
Software-Side: Checking if Windows was up to date --> Nothing to updateUpdating the motherboard's BIOS --> Not betterUpdating the LAN's drivers with the ones I found on the manufacturer's website --> Not better
I am wondering what is wrong with my installation. It was working A1 a few days ago, except for the issues I re-installed the operating system for.
In my network 4 Desktop running windows XP all are connected LAN cable and my modem is tplink and 1 laptop running windows 8.1 pro accessing network through wireless in my laptop network place all the pcs are visible but I am not able to ping them and when I click I am getting message that Network path not found Error code 0x80070035
View 2 Replies View RelatedMy 8.1 laptop shows multiple network connections to my Samsung Smart TV --- One as "media connections" and 3 as "other connections". Both devices are on a simple wireless network using Linksys WRT54GS.
Under the "Network" page, most of the "Properties" of the TV connections are the same except for "Serial Number" and "Unique Identifier". Did I do something wrong when setting things up? Are these extra connections harmful? Should I delete some? How?
I purchased a new Windows 8, Inspiron 15 7000 series - 7537 last December. I had been using a router at a hotel for the time, and it worked correctly. When I arrived home, I had a Belkin router, and i experienced network issues in that i could not connect to the wifi. I could connect with Ethernet cable. The problem was fixed through customer support eventually, but I now have a new Comcast router, and i'm experiencing what appears to be the same or a similar issue. I can access the internet fine by wire. With wifi, it says i have access to the internet over the internet icon in the bottom right, but i cannot access webpages. I can use skype, and communicate through it.
Here is the result from the ipconfig /all :
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
[Code] .....
I really need the wifi on this router working for this laptop. Let me note that it works on other laptops, so it should be an issue with hardware or settings on this laptop.
With the following problem regarding media streaming in windows 8. Up until recently I could stream video films from my HP laptop & HP desktop onto the TV via DNLA.
After following several posts on various sites it seems that when I try to start the windows media player network in the services I get the error message "windows could not start the windows media player network sharing service on the local computer.
Error 1068. The dependency group failed to start."
In the dependencies tab in the lower box of the two "the following system components depend on this service"
The box is greyed out and the words no dependencies is displayed.
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
I upgraded to Windows 8.1 from Windows 8 and I can no longer see the files inside the folders on my networked drive. Before I upgraded I could see them, after the upgrade - not so much. The folders are fine, I can see them, just no files visible. There's no network issues as the files are visible from my Win7 machines and my wife's Windows 8 machine. All the standard default sharing and viewing settings are correct. Even if I put the direct path in File Explorer is tells me there's nothing there. I'm absolutely baffled. I have never seen this particular type of sharing issue before. I'm a pretty savvy Network Admin so the basic troubleshooting (and standard sharing settings) has been covered.
View 6 Replies View RelatedWhen I click network while i am in windows explorer, the network infrastructure is not there, only the Computer is visible there and i want to fix something by changing the properties of my modem/router on the network infrastructure.
View 5 Replies View RelatedWhen you first connect to a new network Windows 8.1 opens up the following window:
I am trying to automate a way so that the answer is always: yes, turn on sharing and connect to devices.
It needs to be automatic without requiring the user to click on the window. This will be used in systems where no keyboard/screen/mouse are present.