Network / Sharing :: Self Duplicating Mapped Drive Letters For One User Only
Mar 16, 2014
windows 2008 R2 server, win 7 and win 8.1 wkstations.
For one domain admin user only, when he logs in he sees normal mapped drives. The longer he's working, he starts seeing more and more letters mapped to the same particular network share. So after a few hours he'll have 12 drive letters all mapped to the same network share.
Doesn't matter what workstation. Doesn't seem to be a particular application.
I have a Synology NAS, Mapped as P: on my computer.
I can see the P: in Windows Explorer. However, in several applications. Most notably Photoshop CC, After Effects CC and 3ds Max 2013. The P: is not accessible from the open dialogue box. Nor can i enter the path manually.
This is a boot up timing issue, registry fix for network comming up. I am on a wired LAN which works ok. However, recently when booting I am getting the message cannot connect to network drives - these are mapped drives to NAS boxes.
However, when I access the drives the 'red X's' change to the network symbol and access is working. Its seems the computer wants to connect before the network is up. It is not a credential issue, but boot order. Is there anyway to make the network come up before the computer wants to map to it. Not a problem but a nag.
I have a laptop running Windows 8.1 with Update 1. I have drives mapped to my Windows Home Server 2011 and to my Windows 7 desktop PC. But each time I reboot the laptop it drops the mapped drives and I have to try and map them all over again. I say "try" because most times I have to go back to my other PCs and unshare and then reshare the drives for them to be seen again in Windows 8. Then I can map them again but only until the next reboot.
Same goes for the Windows Home Server 2011 Connector software. Windows 8.1 drops the connection after a reboot and the Connector software must be reinstalled EACH TIME to connect with my server.
I have the SAME user name and password on ALL machines. I have tried mapping the drives with just the username and password as well as with the remote PC nameusername combo but that doesn't work either. Finally I have set my shared drives/folders to have read/write access to ALL users. Again, no luck unless I unshare and reshare.
Location is not available to mapped network drive in Windows 8 I'm trying to copy a file from my mapped network drive, which is something I've done 1,000+ times in Windows 7, but for some strange reason I get a location unavailable error when trying it in 8. I tried deleting and remapping the drive and then tried restarting the computer. Neither of these resolved the issue. I've noticed that I can copy it to my desktop but nowhere else. See the attached images for more information.
I just upgraded to Win 8 and as I did my multiple external drives got assigned letters that are not what I had before. No problem. I went o Disk Management to reassign the drive letter but letters J, K, L, and M are not available. There are ones before and after those letters that are available but I need those letters.
At my company we are currently running a server (with Windows Server 2012 R2 Standard), without Active Directory, and we have a bunch of laptops running Windows 8.1 Pro. Now we want to install Dynamics CRM which requires an Active Directory domain.
I am trying to run through every anticipated problem before I do the domain configuration. The last problem that I anticipate is the following:
Our MD's laptop is currently logging in without a Microsoft account (in other words, he uses a standard local user profile in Windows 8.1 Pro). He has a whole lot of data in this profile. So now, when we configure the domain, obviously he will have to sign in using an Active Directory username and password. So question 1 is, is it possible to synchronize the current non-Windows Live account with the domain account? And second question is, when he's working from home, without the domain controller to authenticate logins, will he still be able to access his data and profile? In other words, what I'm really asking is, will we be able to kind of integrate the Active Directory account and local account as one account, but the authentication is AD based when he's at the office, but local if he's at home?
Im looking for a way to have wifi access per user for example one user can have access to wifi while another user cant have access. (Currently Using Windows 8)
In Windows 7 I used this method (Profile types) to allow wifi per user and it works great. How to Enable User-Specific Wireless Networks in Windows 7 But in Windows 8 I cant seem to set wifi access per user.
I have this problem since Windows 7, i don't remember this happens on Windows XP.
I have 2 computers with Windows 8.1 installed: desktop and laptop. I am trying to access local disk drives of "desktop" from "laptop".
For example, i type in Windows Explorer "desktopc$". "Windows Security" window pops up where i am typing credentials. If i specify "desktopadministrator" user and then provide correct password everything is fine, i can access disk C. But, if i type "desktopjohn" and provide correct password i am getting error "Access denied". "john" is my main account, it's in "Administrators" group of "DESKTOP" computer.
If i try to access the same resource over "cmd net use" i receive error "System error 5 has occurred. Access is denied."
Why "john" can't access "DESKTOP"'s disk C over LAN?
I use the Windows Account to login to my 2 Windows 8 laptops (Lap1 and Lap2).
Lap1 - Has 1 Windows Account (Lap1Acc1) Lap2 - Has 1 Windows Account (Lap2Acc1)
In Lap2, the Windows Account Lap2Acc1 had few problem with "Trust this computer" as Windows never sent the code in the registered email. So I created a fresh new Windows Account (call this Lap2Acc2) with new email. I deleted the Lap2Acc1 from Lap2 using User Accounts and created a new user using Lap2Acc2.
Now the problem is. Before removing Lap2Acc1, I didn't leave the HomeGroup and so, for some unknown reasons, in both of my laptops, in the HomeGroup tabs I see these users
Lap1Acc1 Lap2Acc1 (this was removed from Lap2 as a user, but it still exists in the HomeGroup) Lap2Acc2
I have two networked PCs. On PC1, I have a program file (.exe) that I want PC2 to be able to access, open and use, but not copy or move from it's location. What would be the best permission settings to adjust on PC1 to protect the file?
On windows 7 I made a shortcut for when I used remote desktop I could press on this shortcut and the session came to an end and the previous user could use the computer without typing pass.
This shortcut: %windir%System32 scon.exe RDP-Tcp#0 /dest:console
I have to find the right session number in task manager. So I have to change the 0 to whatever session id I log in with.
Are there a shortcut that will always work without have to edit the shortcut every time? A symbol or something for the correct login number?
I want to backup my photos from my computer's D: drive to OneDrive. But when I start to upload them, it says those photos are also available offline. That means, all photos uploaded from my D: drive are also copied to my C: drive. But it wastes my space on the C: drive. All my settings are set to upload photos with online access only. I tried to delete the copied photos from my C: drive but it also deleted them from OneDrive. Is it possible to upload only to OneDrive without copying the photos to C: drive?
I was happily using file history, it was backing up to my G partition, which is located on my second hard drive (both drives are internal)but now I get error message:
I think the problem is that this partition got added to my user, that's what the network path shows:
How do I get it out of my user, and back on a normal path?
I have 2 PC's. Both are now running Windows 8. The main PC was running Windows 7 and I there mapped a network drive (z to the Windows 8 PC. It worked very nice. The second PC was also shown in "networks" in "my Computer" right after boot of Main PC. So network for sharing is set up properly on second PC.
After installing Windows 8 on main PC, it is still working, but the time spend waiting for the network drive is waaaaay longer now. The name of second PC "Photo-PC", is shown right after boot, but when I first click on the name, and get this error:
Networkpath not found. Errorcode 0x80070035
If I then wait about 20-30 seconds and then click again on "Photo-PC" then I have access to all shared drives, included my mapped network drive Z:
How can I eliminate this 20-30 seconds delay after boot?
I have given up setting up a homegroup, never had it to work, but "oldfashioned" network drives used to work
I upgraded to Windows 8.1 from Windows 8 and I can no longer see the files inside the folders on my networked drive. Before I upgraded I could see them, after the upgrade - not so much. The folders are fine, I can see them, just no files visible. There's no network issues as the files are visible from my Win7 machines and my wife's Windows 8 machine. All the standard default sharing and viewing settings are correct. Even if I put the direct path in File Explorer is tells me there's nothing there. I'm absolutely baffled. I have never seen this particular type of sharing issue before. I'm a pretty savvy Network Admin so the basic troubleshooting (and standard sharing settings) has been covered.
I'm trying to map my box.com cloud storage using "Map Network Drive".
I found the "Map Network Drive" button at the top of my folder. I click on "Connect to a Web site that you can use to store your documents and pictures". I follow through "Choose a custom network location"
At "Internet or network address" I type the url where I would log into box through the internet: [URL] .....
At next I get the login prompt, so I login, clicking "Remember my credentials" , when it returns, indicating that my login is incorrect the number of letters in my password has doubled, so of course my password is incorrect if the "network drive" is adding a bunch of extra characters.
So I go back and click on "connect using different credentials" and get the same result ....
I remotely support a couple of relatives using Team Viewer, and am able (and do) to sometimes go into their systems to carry out updates without them being there.
I would like to leave a sticky note of some sort on their Windows 8.1 start screens after I have been there to tell them what I have done. I would like them to easily delete the note once it has been read. Is this possible on the start screen, or is the way that it works unsuitable for this sort of thing?
Any simple application that can do this? I have looked on the web for suitable applications, but those that I have found seem unsuitable for one reason or another.
I have a wireless router and am connecting 2 phones (wifi) and 1 PC (ethernet). The PC is running Windows 8 and has two User Accounts (I'll call them "Business" and "Personal").
Since setting up the router, the phones have connected over wifi without problem. If I log onto the "Personal" user account on my PC, it connects over ethernet, and the phones still work with wifi.
However, if I log my PC onto my "Business" user account, the PC says it has connected to the Home Hub via the ethernet cable, but there is no internet connection. It also causes the internet connection on the phones to drop (sometimes the wifi goes down completely, sometimes it says it's connected to wifi, but there is no internet). I don't think it's an ethernet problem either, as I connected my PC wirelessly instead of with the cable, and the same thing happens.
The PC only ever does this on the "Business" user account, the "Personal" account works fine (I'm using that now). Looked everywhere to find a solution, I assume it's something in the settings, rather than a router issue. Can't find the answer anywhere.
I was wondering if it was possible to share an internal hard drive over the homegroup network or any other possible way that I can view video files on it on my tv?
I am trying to find a solution to transferring large files (100+GB) between myself and a client of mine at a different location through the internet. The easiest one I have found was through a Private Network through Logmein's Hamachi, as you can browse other connected computers' files through this network.
Of course, to show the shared drives by the host computer, you need to input a username and password through the UAC. Obviously, if I insert my own username and password, I can see the folders I've shared. However, how do I configure a username/password for my client? Are these users the same as local users? I would like to avoid having to make a local user for him on my own computer.
Just for reference, I have no control over my network I am connected to, so no FTP, no port forwarding etc.
I am having issues with my clients. Every time they logon, the information won't go through the PC client and load up. I get this problem in the image below.
I have two computers on a large desk side by side. Both are running Windows 8.1
I have a drive on computer A which I want to be able to access on computer B.
I have gone into advanced sharing for the drive and enabled sharing. However, when I go to map the drive on computer B, I get an error that I don't have permission to access that drive.
What am i missing here? Neither computers are using logins/passwords for the admin user account.
Been having trouble this morning with my network drive in my Home Server. It normally connects fine at startup and it all of a sudden wont work.
I have isolated it to my Desktop as i can connect off of my Laptop fine.
The name of my server is Homeserver(192.168.1.77) and I have shared a folder inside the drive rather than the drive its self. This image shows how I'm trying to connect to the folder. And this is the error I'm getting
I have tried: Resetting ip / dns flushing etc. sfc /scannow (Says everything is fine.) Windows 8.1: files in folders on network drive not visible W2K3 Server can access W8 W8 computer cant see W2K server Also tried disabling norton on my desktop but still wont work
I can add and use files from a laptop I have on windows 7. However on my desktop running windows 8, I cannot add files to the hard drives attached to my network.
I currently have the Western Digital N700 router, with 1 3 tb backup drive attached.
I can get videos from it or other files, however I cannot add. When I go to drag and drop I am getting the circle with a / through it.
Its difficult to have to use a different computer to upload files.
I use a network hard drive connected to my router for media storage, and it never had any problems when I ran Windows 7. I recently upgraded one PC to Windows 8, and now that PC cannot connect to the network drive. The drive does not show up under "Network" in the explorer sidebar.
It still shows up as a mapped drive under "Network Locations," (which was set up before the upgrade) but Windows 8 sees it as Offline. The drive still works perfectly with the other PCs in the house (all of which still run Windows 7), so it definitely seems to be a problem with 8. What might have changed between 7 and 8 that is preventing the PC from seeing the network drive?
Edit: It may add that all of the PCs and the network drive are connected to the router via ethernet cable (in other words, it's not a wifi issue), and the Windows 8 PC can see the other PCs on the network with no problem.
I have an HP elite 64 bit on Windows Pro. I also have an Imac 64 bit etc.
I used to be able to access my c drive from the imac, now I cannot. It says I cannot access the folder because of permissions. I have full control to all, and I have all sharing turned on in Windows and the Mac. What could be causing this if the drive is shared? Like I said, I used to be able to do it fine, I can see it and there are certain files within the c drive I CAN access but nothing that I NEED to access. What is accessible now is more "public". I can see and access my externals as well it is just the C drive that is tossing the error.
