Apps / Software :: ISO Error - Disc Image Not Formatted For NTFS
Sep 15, 2014
OK, so I made a backup DVD of some OS related programs for my computers onto a DVD, but when I attempted to MOUNT the image from the disk to Win 8.1's included virtual drive, I get an error that the Disc Image is not formatted for NTFS file system, and cannot be mounted.
I can copy the files from the disc to a location on the desktop and execute the files from there, but it's a royal pain in the neck to do this every time.
(Yes, I understand, I probably will need to build a new image and burn it to a new DVD, but I want to make it one that I can run the disc from my optical drive and it will work!).
USB is volatile storage, and can be erased. I prefer hardcopy backups for this reason.
I bought a brand new Acer Aspire xc600 today and it had Windows 8 installed. First thing me and my husband did was to try to install win7 (as we dislike Windows 8 for many reasons)... When it didnt work with just putting in the cd and install, we (stupidly without making recovery discs as we thought we would never need it) formated the drive and made it completely clean before installing win7 (which works now). This means we have no Windows 8 recovery disc or E-recovery management program and therefor cant do factory reset and return this piece of crap pc... (We play world of warcraft and my 7year old pc has only been updated once when it comes to graphic card to geforce 9800 and still perform better outside the game).
The performance test of the whole system give the graphics a lousy 5.0 which is worse than my husbands 3yr old graphic card as well! Only numbers that have increased is the RAM and CPU.
I feel disappointed as the graphics card should be better than mine or my husbands and have better performance even if its the "laptop sized card".
So to the issue, is there a way we could restore/reinstall the computer to factory settings with Windows 8 and Acers drivers as it was when we started it up earlier today?
I had a 20 GB image file . Weeks before the partitions with the appropriate drive software acronis all files have been deleted . Therefore Ontrack.EasyRecovery.Professional.10.1.0.1 recovery software to recover files but when I run the ISO file with the following error is encounteredlogin .
I have 10 computers with identical hardware that all have their own oem license. What I want is to have the same setup on all 10 computers. What I remember from previous Windows versions is that you had to activate Windows individually with its own oem key for every computer you restored with a preferred disk image. From what I read the product key procedure is a bit different in Windows 8 and that the key is stored in the bios? The activation should also be handled automatically by Windows, is that correct?
So what I really wonder is: Do I still have to activate every restored pc manually or will Windos 8 do this for me?
A second related question: Are there any imaging/cloning software that can be set up to promt me for a new computer name in the restore process?
Upgraded to windows 8 pro, worked fine for sometime, but now it does not boot- says either error loading operating system or disc read error. Re installed Windows 8 after booting with another hard drive with winXP, worked fine for sometime, then it failed again displaying the same error messages. Been using this system since long, but this has never happened before. I have reinstalled again by the same procedure, but always wary of the same problem happening again.
Today my beloved Win 8.1 gave me a surprising license deactivation, meaning the license just suddenly became void despite working properly for some few months. I suspect two reasons:
- I changed GPU the day before (but it's not like the problem occurred right after changing GPU) - during system boot right before occurrence of the issue Windows was performing (routine?) HDD autorepair. This could suggest that some system files were damaged in the process
Obviously, my license is genuine.
I did try slui.exe 4 - nothing loads after selecting region. The loading icon just keeps running. I also tried sfc /scannow. It said some files were corrupted which could not be repaired. I'm attaching the log file. I also tried performing autorepair from Windows CD - to no avail.
I don't even know if buying a new license key (which I obviously would like to avoid) would work for me. An activation suddenly disappearing is just so... windows.
My OS is Win 8.1. I use Twonky media server to play my music remotely on my smart TV. Obviously, it scans my music libraries, however, I want to have it scan for new playlists as well. I use Winamp as my music player. Where on my local disk a file is created when I generate a playlist in Winamp?
Under Win 8 Pro 64-bit, I discovered the following oddity: When I try to mount an ISO image using the Windows' built-in mounting function, it works when the the ISO is located on a local drive, but NOT if it is on a network drive (linked to my NAS). The latter case yields an error saying that mounting failed without further explanation. (YES, the Iso file type is associated to Windows Explorer and YES, there is a spare drive letter after the local drive letters; actually my local drives are from B: (DVD) to D:, and the network drives are between F: and Z:, so that a mounted ISO receives a virtual drive at E: .
Qny better solution than installing third-party mounting software like DaemonTools?
I bought a ASUS laptop last year w/8 on it. No media. I upgraded to 8.1 recently through the Store. I didn't seem to have an option. All went fine and a few weeks ago I started getting this popup, usually several times a day
SystemExplorer.exe - Bad Image
C:WINDOWSSysem32VSSVC.EXE is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. Error status 0xc0000020.
I've tried googling portions of the error and all I saw was to run sfc /scannow, which I did with these results
Beginning system scan. This process will take some time. Beginning verification phase of system scan Verification 100% complete. Windows Resource Protection did not find any integrity violations.
What can I do now to fix what is broken and stop the popups? Is this a f/p that will self correct as I get updates from Microsoft? 8.1 seemed to fix 2 problems I had: laptop would shut off periodically and battery never said 100% Fully Charged.
I have upgraded my Windows 8 PC to 8.1 yesterday and it seemed like everything is working fine until I tried to create System Image. I got an error 0x80780119 saying that there is to little space on one of the partitions.
I started looking into this problem and indeed one of the partitions does not meet the requirements. There are following partitions on my drive:
Partition 1 has only 13MB free space. Partition 2 has 70MB free space, partition 3 is MSFTRES, partition 4 is my C drive with around 35GB free and partition 5 is not included in system image. Partitions were create like this during installation of Windows 8 - clean install from scratch. I am using UEFI so the drive is GPT formatted.
So I thought, OK I can resize my C drive a little, move the partitions and expand the 1st one. I tried using GParted but it is not able to move the MSFTRES partition. It does not recognize the file system on it.
So the question is: Is it possible to "clean up" the 1st partition in anyway? If not, is there anything special about MSFTRES partition? Or can I just remove it and create it a little further and just flag it as msftres with GParted?
My windows 8 pro install messed up n i have almost 2.8tb of stuff on my drive on a 3tb hd. I have an identical hd as a backup which i have (an apparently successful) a backup of my system from a couple of weeks ago on. I had set the system to do scheduled backups of the system (set to backup a system image of efi partition and c. There were a few times where i was trying to get other things done and the systemwas running slow so i cancelled the backups when i noticed them running. The software stopped the backups (seemingly successfully).
As i say my system messed up - i came home to find out it was no longer downloading (as i had left it doing when i went to work) but was on a blue screen (bsod?) saying the system needs to be restarted. Since then it didnt work well at all and after dskchk reported that several sectors were damaged so it was moving data to spare sectors (or whatever it generally reports when this happens) there were a lot of files messed up or reported as deleted when doing a file recovery scan with recuvva.
So i decided to restore the backed up system image from the other hd. Incidentally i tried mounting the vhdx backup image from that hd via windows explorer which then reported "the disk needs formatting" and didnt get any success mounting via disk management either (it mounted in the app but didnt show up on windows explorer and if i tried to access info on it via disk management it reported the same"disk needs formatting prompt".
So when i booted my win 8 dvd it didnt work cos the dvd wasnt an efi booting version so i had to boot from a usb version with the efi bit included.
I formatted the system drive and chose to do an image restore. It started doing the restore (apparently) but every time i came back to it later i had the follwing error:
"Re-image your computer
The system image restore failed.
Error details: The requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria Ox80073B92"
It took me so long to set up my system n i have a lot of my own data on there too. The system drive I formatted was created in diskpart and then re formatted with "format" command (as it created the disk in raw mode) so now it is ntfs mode (uncompressed).
Am using recimg to create custom image on freshly upgraded win 8.1 install. It fails almost immediately with this message appearing in a pop up:
"The procedure entry point ??0BufferedStream@UnBCL@@QEAA@PEAVStream@1@K@Z could not be located in the dynamic link library c:windowssystem32migwizmigcore.dll"
Further info:
Problem signature: Problem Event Name: APPCRASH Application Name: recimg.exe Application Version: 6.3.9600.16412 Application Timestamp: 5243fc60 Fault Module Name: KERNELBASE.dll
[Code] ........
System info : OS Name Microsoft Windows 8.1 Version 6.3.9600 Build 9600 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name TOSHIBA
So this is what I get when logging into my game after doing some driver updates which I did after installing a GeForce 8400gs on an Acer Aspire xc600.
c:windownssystem32 vd3dum.dll is either not designed to run on windows or it contains an error. try installing the program again using the original instillation media or contact your system administrator or the software vendor for support. Error status 0xc000012f.
(The top of this error box says) archeage.exe - bad image
See, my little brother accidentally formatted an encrypted partition of my HDD (Disk drive D: 100 GB to be exact) which contained really important data that I need back! It had all of my photographs from the past 5 years (which I was too lazy to back up on cloud storage).
Would this recover the lost data? I do have the password and the recovery key. I hope this works...
I recently set up Windows 8.1 on a new SSD (as GPT). While I'm aware that Windows automatically creates its necessary extra small partitions for recovery, I just realized that my secondary HDD which I also formatted as GPT has these extra partitions. This secondary HDD was the one shipped on my laptop that used to have Win 8 preinstalled so maybe its remnants of that.
My question is (and I hope this is the right forum to ask): Are those partitions only necessary if the said hard drive contains the OS? In other words, can I delete them since this is a secondary drive?
As the title states, I'm switching back from Mac to PC. I have all of my precious photos (I love photography in particular) and music stored on an external hard drive (iomega), but it's been formatted for Mac OS. I read that you can't transfer from a Mac OS formatted drive to a PC.
Telling me to reformat the ext. hdd to fat32 isn't going to work, because first of all, that would delete the valuable data, and fat32 only allows the transfer of files less than 4GB.
How I can transfer all of my data on my Mac OS X-formatted external drive to my new Windows PC. It is absolutely essential.
For some odd reason my laptop decided to not boot into windows anymore; It would be stuck "boot looping" with my MSI laptop logo and a loading sign (rotating circle). I had Kali Linux and Windows 8 installed on the laptop and neither one would work. So I formatted the entire HDD with all 3 partitions, windows partition, even my storage, and kali's partition because the automatic repair wouldn't work as well; it'll be stuck on Preparing automatic repair and wouldn't get past that screen. I have formatted my HDD with my other windows 7 machine by just right clicking -> format.
I have downloaded a torrented version of Win 8 iso (just for the purposes of installation, my laptop came with a Serial # and I have purchased an product key only version as well). I have burned a DVD of win 8 via winISO and changed my boot options to boot from DVD as well.
Now my problem is, when I am prompted to press any key to boot from CD/DVD and I press a key I am redirected to Preparing Automatic Repair and back to square one of my problems. I believe the recovery/backup partition is still on there.
I have tried being in both LEGACY and UIEF. UIEF sends me to Preparing Repair and LEGACY takes me to the windows 8 logo with the rotating circle underneath with nothing after that (not sure if it takes a VERY long time or not)
I built myself a new system and I am now on my third clean install of Windows 9 Pro. The first installation was nixed due to faulty programs and the second by faulty hardware. This installation seems to be fine, at least my event log is not showing any significant errors. I really don't won't to do another clean install so the question I have is:
Can I install Windows with UEFI without reinstalling on a new hard drive formatted as GPT?
Any decent free/low-cost software package for recovering data from an NTFS partition? My Windows 8 has gone down and I suspect the file system has become corrupted.
With UEFI BIOS,Windows 8 make my data HDD to RAM file systems during partitioning HDD and WIN 8 cannot recognize it after finishing Windows 8 installation and log in.
Is That Windows 8 bug or AMI UEFI BIOS's bug.
If the RAW is GPT's file systems format. The system HDD why is NTFS not RAW.
Suddenly Win 8.1 (on partition F) can't read anymore my other partions on the same drive, also it coudn't read my external USB drive.
When clicking on the partitions c: or d: it says 'cannot access local device' and 'device not ready'.
I have a dual boot system with Windows 7 and 8.1. I can boot into Windows 7 and read all partitions. I also checked the MBR which looks fine. I also have controlled in Computer Management that all drives have a letter assigned.
However Windows 8.1 can read my USB drives and the installation DVD of Windows 8.
Clicking on properties of e.g. drive c: there is of course no security tab, so it shouldn't be a question of permissions. Also no error codes in event log.
Booting in safe mode does still does not solve the problem. Of course Windows 8.1 can read perfectly its partition where it has been installed.
I know, a repair or refresh might be the solution, but if possible I want to avoid it.
Checked also with my different antivirus and spyware programs. All comes clean.
I have been having problems on my primary hdd, and after doing a full hdd scan, I found that I had some bad sectors, which caused some windows hangs, problems, and some bad file reads.
After googling for programs to recover and fix those bad sectors, I have found HDD Regenerator, which did a wonderful job, on fixing and recovering all my bad sector by using a patented algorithm to magnetize again those bad sectors on my hdd.
But after that, I still have marked on my ntfs partition those bad sectors, even tough they are ok now, how to I reset the bad sectors on my partition, to mark them as good to use, Without losing the contents of my hdd?
From many days i was trying to make backup but i was not able to make than i found that my Master File Table it corrupt which located in System Reserved.
Than i thought of Re-Installing Windows than i Formatted System Reserved Drive & My C Drive.Now I am not even able to Install Windows.
Error Shown by the Windows Setup - Setup was unable to create a new system partition or locate an existing system partition.
I've had my Sony Laptop for under a year now, and it was working alright (with the occasional problem such as BSODs), but today after having hibernated the computer (never shutting down/restarting) for a month (because I went on holiday), I finally was forced to shut down by Windows update. However, when I booted up again, it signed me into a temporary user account. This had happened to me before, so I didn't think much of it, I tried to do a system restore, but came up with the error: 0x80070005. I tried different restore points, but they all yielded the same results.
Then I tried doing an sfc /scannow, which said nothing was wrong. I also scheduled a chkdsk /f/r for boot. Unfortunately it got stuck on 28% for over an hour. So I turned the computer off. When I turned it back on, I was unable to sign in: "The user profile service failed the sign in user profile cannot be loaded". So I restarted the computer. This is where it got really bad.
As soon as the computer boots up, it shows the loading signal then instantly goes to the Windows 8 BSOD saying that there was a problem with NTFS File System.
Now each time I boot up, it does the exact same thing. What do I do?? I haven't had this laptop for long. The laptop is still under warranty, am I able to get it fixed under warranty.
I purchased a new SSD drive for running windows 8, while installing I unplugged all of my other drives in my machine including a WD 2TB drive I use for files. I cannot seem to get the Windows 8 installation to be able to access the drive when I select it it says "F: is not accessible. Access is denied" after following the instructions below. The drive is recognized by the machine still, I just cannot access it from this Windows 8 partition?
"Access Denied" or other errors when accessing or working with files and folders in Windows
Long press the folder you want to take ownership of, then tap Properties.(If you are using a mouse, right click the folder, then click Properties.)Tap or click the Security tab, tap or click Advanced, then tap or click Change.Tap or click Edit. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.Type the name of the person you want to give ownership to and click Check Names.The person that you're giving ownership will have their account displayed in the box, click OK.If you want that person to be the owner of files and subfolders in this folder, select the Replace owner on subcontainers and objects check box.Click OK.