Graphic Cards :: Bad Image Error Status 0xc000012f After Installation
Sep 15, 2014
So this is what I get when logging into my game after doing some driver updates which I did after installing a GeForce 8400gs on an Acer Aspire xc600.
c:windownssystem32
vd3dum.dll is either not designed to run on windows or it contains an error. try installing the program again using the original instillation media or contact your system administrator or the software vendor for support. Error status 0xc000012f.
(The top of this error box says) archeage.exe - bad image
View 1 Replies
ADVERTISEMENT
Jan 18, 2014
I bought a ASUS laptop last year w/8 on it. No media. I upgraded to 8.1 recently through the Store. I didn't seem to have an option. All went fine and a few weeks ago I started getting this popup, usually several times a day
SystemExplorer.exe - Bad Image
C:WINDOWSSysem32VSSVC.EXE is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. Error status 0xc0000020.
I've tried googling portions of the error and all I saw was to run sfc /scannow, which I did with these results
Beginning system scan. This process will take some time.
Beginning verification phase of system scan
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
What can I do now to fix what is broken and stop the popups? Is this a f/p that will self correct as I get updates from Microsoft? 8.1 seemed to fix 2 problems I had: laptop would shut off periodically and battery never said 100% Fully Charged.
View 4 Replies
View Related
Dec 4, 2013
Trying to address a different problem, Gigabyte suggested that I update the BIOS on my GA-F2A88X-D3H mb from F1 to F3. In addition to not solving the problem, after I updated the image displayed on my monitor--Dell 2209 WA--doesn't fill the screen. Everything's there, but the image stops about 3.5" short of the right bezel.
Using AMD's Catalyst Control Center hasn't worked. I've read some posts about a similar--the same?--issue that suggest changing a setting in "My Flat Panel Display." But I see only "My VGA Display," with no option for over- or under-scanning.
The image does display fully on rebooting--I see the Gigabyte UltraDurable logo, and on entering BIOS instead of going into Windows 8.1 (64-bit).
Since first writing this, I've tried the monitor's menu and other buttons without success.
Is it worth getting a DVI-D to DVI-D cable to connect digitally, in place of the current VGA connection?
Does it signify that the monitor reports a screen resolution exceeding its supposed maximum of 1680 x 1050, namely, 1920 x 1080? In both Windows screen resolution and AMD CCC, I'm unable to set a resolution above 1680 x 1050, and setting lower resolutions doesn't work.
View 1 Replies
View Related
Dec 25, 2012
Today, I got a new graphics card for my computer that is about 5 years old. Here are my specs:
Dell Inspiron 530
Intel Core 2 Duo e2500 2.33 GHz Processor
NEW GPU: MSI Geforce GT 440 (N440GT)
OLD GPU: NVIDIA Geforce 8600GT
3GB ram
300 watt power supply (unsure of 12V ratings)
Windoes 8 Pro 64bit
I installed my GT440 into my computer today, and the card worked fine when there was no drivers installed. I uninstalled my older drivers from my 8600 and installed drivers for the 440. When I restarted, I got the BSOD with an error message saying VIDEO_DTR_FALIURE. What does this message mean, and what can I do to fix this BSOD problem? This didnt happen on my old card, but it does on my new card? Is there a problem with my power supply, or is it an issue with the drivers?
View 3 Replies
View Related
May 31, 2013
I've upgraded to Windows 8 Enterprise and started to receive errors of my GPU.
The screen go black for couple of seconds and then this error pop up : [URL] .....
I had this error many times as you can see : [URL] ......
Details of most recent error : [URL] ......
What could be the reason of this error?
My PC Spec
Windows 8 Ent. 64x
Gigabyte GA-G41MT-S2
Intel Core2 Duo E7500
ADATA DDR3 2x2GB
AMD Radeon HD 6450 >> driver 13.4
View 8 Replies
View Related
Aug 30, 2014
Today our Windows 8.1 system stopped and crashed when watching a video on the internet. The system was not able to restart and the screen has green lines. Please see some photo's. Once I got a message (of which I did not make a photo) about error video ftr or something like that. Cannot refresh installation since I have no Windows 8/Windows 8.1 dvd. It was a download from MS (image) and upgrade to Windows 8.1 When I start windows normally webcam light flashes and HD light flashes but screen remains black.
What steps to take? I cannot see the logfile since I cannot connect to the PC from my iMac anymore.
View 2 Replies
View Related
Jan 4, 2014
Info: Dell Inspiron 15, Windows 8 premium, I5, 4GB
What do I have to do when faced with the following error message:
Catalyst Control Center: Host application has stopped working
I have a close program option. I do it. Nothing looks different. Everything works as before.
View 9 Replies
View Related
Dec 25, 2013
I recently installed Windows 8.1 and it turned out that I could'nt find suitable drivers for the graphics card of my laptop which is GMA 4500, part of Mobile Intel Series 4. After a bit of reading, I found out that many others are also on the same ship as me.
Previously I tried the drivers from Intel Download Center and the modified drivers from eightforums but both of them gave me an error which read something like 'an error occurred while registering one or more components'.
Now that I have the right drivers, or at least right for my laptop, I am sharing them with others here. I have successfully tested a software that requires OpenGL2.0 with these drivers and it works great!
You most probably don't need a custom certificate installer! I did'nt need one. These drivers are digitally signed.
DRIVER DOWNLOAD
FOR 64 BIT WINDOWS
Mobile Intel Series 4 Driver x64
Version 15.15.3.64.1855
7z File(12.97mb) Link Dead
Archive Password: digitalamerica.us
FOR 32 BIT WINDOWS
Mobile Intel Series 4 Driver x86
Version 15.15.3.1855
7z File(15.52mb) Link Dead
Archive Password: digitalamerica.us
INSTALLATION
1. Unzip 7z archive
2. Run Setup.exe
TROUBLESHOOTING : If you run into an error telling you that you dont have the correct operating system(unlikely to occur), just run the Setup.exe in compatibility mode for Windows 7.
View 6 Replies
View Related
May 10, 2013
I have a very serious issue with my brand new Lenovo IdeaPad Y500 GT 650M SLI system (specs at the bottom) . I can't play games at all because my system will lock up as soon as I enter the game, requiring a hard reset. My Windows Action Center is filled with Video Hardware Error reports. Is this because of a bad video card or is it a driver/software issue? I am on a clean install of Windows 8 Pro and have already tried the 314.22 WHQL and 320.00 BETA drivers. Nothing is overclocked.
View 4 Replies
View Related
May 27, 2014
my graphics card, Nvidia GT650 is not ready for UEFI installation and I have no way to flash the bios. If I boot using legacy bios, install the card, then can I flash the card BIOS and then return to UEFI booting?
The card is currently not installed and I have no other system to use to flash the cards bios.
View 1 Replies
View Related
Sep 15, 2014
My system specs are the same as under my profile.
Running a single R9-290 on Win 8.1 Pro 64bit.
The PC completely hangs up when installing the new 14.9/14.7 beta drivers.
It extracts fine, checks system requirements, starts installation, reaches "Installing AMD Display Drivers" and flickers twice, and freezes up a second later.
Tried almost everything. Uninstalled previous 14.4 via control panel (they work fine btw), used Display Driver Uninstaller in safe mode, restarted and tried installing, but to no avail.
Have also tried uninstalling the MSI afterburner and other similar programs but get the same result every time.
View 1 Replies
View Related
Mar 29, 2013
In Windows Event Viewer I'm getting this error: Windows can not easily be started with the error status 0xC00000D4. The problem is that fast startup that is included in windows 8 doesn't work (that's why I get this error) but I can't seem to solve it. My motherboard is Asus P8Z77-V LX
View 1 Replies
View Related
Mar 1, 2014
My computer is hp envy dv6 7280sf notebook with 2 GPUs intel graphics HD 4000 and Nvidia Gefoce 630 M running windows 8 64x.
After making an free upgrade online for windows 8.1 which run successfully, both gpus were ok...
But after receiving a windows update with new drivers for intel graphics 4000 gpu , after install and restart , the computer freezes on blank black screen at windows startup with no mouse or anything only backlight.
So safemode was succeful but i figured that the update for windos update was the cause and graphics drivers were installed so i removed the drivers for intel graphics and itried to reboot the computer so the restart was succeful but the intel graphics card was unistalled and no drivers were automatically installed so i tried to download and install the drivers from hp and intel website for windows 8.1 however the install fails.
Automatic install from device manager failed both online and from computer and even from manual driver selection.
So therefore the install failed in safe mode , and the high def audio device ( on screen audio possibly) failed and the device was not recongnized (no drivers installed) so i'm stuck without anydrivers for the integrated gpu and the games are no longer able to run normally even if the nvidia card is on.
I tried downloading an installing Windows 8 drives but it failed to install also , for instance any new install of drovers seems to fail for me even for external usb hard drive.
View 9 Replies
View Related
Feb 21, 2014
I'm building a system for cryptocoin mining, and am having a little problem with getting Windows 8.1 (home, not pro) to run the 3rd card (GPU) My equipment is:
Gigabyte 990 FXA UD3 MOBO
AMD Vishera CPU
2x4 gig Corsair Ram
3x Sapphire r9 280x Video cards
1000w Corsair PSU
Scandisk SSD
All parts are brand new.
Here is the problem... everything boots just fine and runs with 2 of the GPU's installed. I have the latest AMD 13.12 drivers, and the AMD APP SKD installed. When I add the 3rd GPU though, windows will auto detect it as a Radeon 7900 with the caution sign, AND/OR a r9 200 series card, also with the caution sign, most times BOTH. Then it randomly freezes the system. A couple of times I got it to run long enough just by luck I guess, to install the 13.12 drivers on the 3rd GPU, but then in a few minuites the system would freeze again.
2 GPU's run just fine, the problem only shows up when the 3rd card is installed, and it happens on any of the 4 16x slots, or both 1x slots on the MOBO. It doesn't matter if the GPU's are directly on the MOBO, or on 1x16 risers. There are plenty of folks running this set up with up to 6 GPU's, so I know it can be done, but I must be missing something somewhere in the windows set up.
View 6 Replies
View Related
Sep 5, 2013
I've got a bit of a strange issue that I haven't had with previous OSes on this PC. I'm running a Dell OptiPlex 380 with Win 8 x64 at the office and I have to run 2 video cards for all of my screens. I have a GeForce 8400GS in the PCI-E slot and a GeForce 6200 in the PCI slot.
Previous to the Win 8 install, it worked fine. Booted exactly as I had shut it off. Now, with 8 - it's killing my PCI-E card presumably when it puts the screens to sleep when I leave for the day. So I'm coming in to all of my windows being moved to the PCI card's monitor (only one hooked to it) and I have to reboot to get PCI-E card to come back.
If I check the screen properties, I see only the screen hooked to the PCI card. I've changed the setting in the BIOS for the first video card to Auto and also tried the PCI-E selection and it's the same either way.
Why on earth would it default to the PCI card rather than the PCI-E card?
View 3 Replies
View Related
Jul 26, 2014
i am on windows 8.i am using HP laptop.this is my ccc version.
i got 2 problems:well first one is that i can't update to windows 8.1 as the update always hang on 82% and after that my laptop
automatically shutsdown i don't know whats the reason is and that's why i am stuck at windows 8 till now although have 8.1 ISO but i don't want to install it as i have to erase my my windows 8 which came pres-installed so i will loose my genuine windows 8 .now i want to know what if i open the 8.1 installer and install it from a virtual tool like Deamon although it gives an option to keep files app setting safe but i fear that it would conflict with 8 and i would have to format my laptop then ok now to the major problem i just recently purchased Watch Dogs and installed it.I played the first mission and got busted so the mission failed and it began to reload and then a error pops up saying watch dogs have stopped working upon googling i found out that this is due to DUAl AMD Graphics so they stated that i should disable it but i cant find any option of disabling DUAL Graphics.
View 9 Replies
View Related
Apr 25, 2014
I'm not sure what I did, miss be when I was installing activclient but now I have a boot error asking for the windows installation disk. Also says
File: BootBCD
Status: 0xc000000f
Info: The Boot Configuration Data for your PC is missing or contains errors
I booted in recovery mode but I can't make a system recovery drive on a USB because it says the boot files are missing. And I don't have a recovery disk because SAMSUNG ATIV 6 doesn't have a disc drive. I've been searching the web for a recovery disc download to no avail.
View 1 Replies
View Related
Dec 20, 2013
graphic card : GT 740m
i play a browser game on chrome named begone nplay with my charger plugged in i get 100-130 fps but whenever i unplugged it it drops to like 20-40 fps . i checked power settings and its always on high performance .
View 7 Replies
View Related
Sep 15, 2014
how can i know GPU activity ?
i like a lot process hacker , i have the last version and under Windows 8.1 pro 64bit ,system information gpu is empty (there is always 0% activity
is there a program that let me monitor?
View 2 Replies
View Related
Jul 2, 2012
I just decided to turn loose Windows 8 RP on "bare metal" here as opposed to a VM. I didn't even bother to mess with video under a VM, but with the bare metal install, I've run into some trouble.
At first, media player didn't seem to play anything, including .wmv files. Messing around, I unchecked the "Direct X acceleration" box and that allowed it to play .wmv files. However, it still won't play .mp4 files -- no video, just sound, and Media Player will hang trying to exit.
It did this with a clean install with only the Windows supplied video driver. My video card has been obsoleted by AMD now (HD 4200 chipset) and I couldn't use the new Windows 8 preview driver package, but I did try installing the AMD 12.4 driver in Win7 compatibility mode. That worked fine it seems, but it still won't play .mp4 files. Turning the Direct X acceleration back on still kills .wmv playback as well.
Win7, both x64 and 32-bit played .mp4 files fine right out of the box on this machine.
View 9 Replies
View Related
May 29, 2013
I've tried to set up a dual monitor for Windows 8.
This is what happens:
Note: If i set it as the tv for the main screen it works fine?
View 2 Replies
View Related
Apr 5, 2013
I have the following graphics card Gigabyte GeForce GTX 650 Ti Windforce 2X NVIDIA Graphics Card - 2GB installed on the system in my sig, what are the correct BIOS setting for the GPU, The options are: PCI Slot, PEG, PEG1, PEG2 and PEG3
View 7 Replies
View Related
Sep 15, 2014
I'm having issues with one of my GPU's fans (it features a dual-fan cooling) and will have to fix it soon. The problem is, it's making an annoying noise and I was thinking if I could just block it for the time being, however brutally that sounds.
So, the question is - provided the GPU doesn't reach critical temperatures (I'm going to monitor this obviously) - would this create any additional risks, like overcurrent or something? (I don't play games, but it's a HD6950, so it does emit a lot of heat).
View 3 Replies
View Related
Apr 15, 2013
I actually think it's integrated, how do I do it? According to running a random game on systemrequirementslab.com (Dead Island), my dedicated video RAM is 32mb. It's not a custom built, I bought it from the store.
Here are specs according to dxdiag:
System Info:
Operating System: Windows 8 64-bit (6.2, Build 9200)
System Manufacturer: Dell Inc.
System Model: Inspiron 5323
BIOS: A08
Processor: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz (4 CPUs), ~1.8GHz
Memory: 6144MB RAM
Page file: 3252MB used, 5310MB available
DirectX Version: DirectX 11
[Code] .....
View 8 Replies
View Related
Mar 24, 2014
I am on my work computer, a DELL desktop with Windows 8.1, and I've been using a dual monitor setup for months, both with Windows 8 and 8.1. One monitor is connected via the VGA input, and the other is through a VGA to HDMI adapter. Again, they've been working flawlessly for months. It was a plug 'n play setup that took a minute and never had an issue.
I came in today and the second screen was blank. In the screen setup menu it recognized it and allowed me to adjust between extending, mirroring, etc. But after I unplugged it and plugged it back in, it no longer recognizes it. It simply cannot find a second monitor plugged in. Both screens work when plugged directly into the VGA port separately but not when plugged in the way they've worked for months.
View 9 Replies
View Related
Oct 25, 2013
How do I get "Screen Resolution" (on desktop, right click and select Screen Resolution) to show my main monitor as "1"?
View 5 Replies
View Related
Sep 14, 2013
I just purchased a new windows 8 PC. I was attempting to hook the computer up to my tv through hdmi (the pc has no VGA input) and when I went through the normal paces to put the display on my tv (display desktop only on 2), the signal did not transfer and there is no display on either my tv or pc! how to revert the display back to my pc monitor without being able to see anything? Acer support was less than useful. It's an acer aspire z3-605 all-in-one pc.
View 5 Replies
View Related
Nov 11, 2013
I've noticed that whenever I unplug my charger my brightness dims down to a point where I know its on, but I can't use it. Usually I have to put my computer to sleep and turn it back on to get it to fix. Also, the brightness wont adjust in anyway when its on. I've tried the function keys and the setting in the side bar. I have a toshiba laptop running windows 8.1 . I also have recently completely wiped it thinking it was a virus of some sorta with no change.
View 1 Replies
View Related
Dec 13, 2013
My Sapphire AMD HD 7870 just bit the dust so it has been sent back with an RMA. I had hoped to replace it with an ASUS AMD HD 3850 but Windows 8.1 will not work with it. There is an error message on a blue screen something about a header (I don't have the exact error message today).
I suspected it was a driver problem so uninstalled the existing driver and tried to install the latest AMD one. I can uninstall OK but as soon as I reboot the Microsoft driver installs itself giving me no opportunity to install the AMD one.
View 5 Replies
View Related
Mar 19, 2014
I downloaded a demo for a game a couple days ago and all I get is audio, my video drivers are up to date. The developers said they were using a program called Unity 3D. I will list my specs below.
HP ENVY X2 running Windows 8
Processor: Intel(R) Atom(TM) CPU Z2760 @ 1.80Ghz 1.80 GHz
Memory: 2.00GB
System Type: 32-bit Operating System, x86 based processor
Graphics Card: Intel(R) Graphics Media Accelerator
View 9 Replies
View Related
Oct 28, 2013
I just bought an Nvidia 620 card today. I run both Linux and Windows on my system. When I go to Linux, everything work fine. But in Windows 8, the GPU fan start to scream. Its too noisy! I even updated the drivers.
View 9 Replies
View Related
