Info: Dell Inspiron 15, Windows 8 premium, I5, 4GB
What do I have to do when faced with the following error message:
Catalyst Control Center: Host application has stopped working
I have a close program option. I do it. Nothing looks different. Everything works as before.
have been using AMD Drivers 13.4, recently tried the new 13.8 Beta drivers, but Catalyst only showed tabs for CPU settings, nothing for Graphics Cards, have tried a clean install and a overwrite of the software, but still comes up the same, have finally got back to using the 13.4 Drivers but only after a lot of hassle.
View 7 Replies View RelatedI have an HP Envy Dv7 with windows 8, running an Intel i7 processor with an NVIDIA graphics card. I have had this laptop for about 1 year. Recently I have had an extreme case of lag with anything that i do, whether it be turning it on, signing in, or browsing the internet. I also occasionally get a popup that tells me that my catalyst control center has stopped working and that windows will close the program until it can find a solution. I haven't run a virus scan because it would take days to get that far on the internet to run it. Should I factory reset? Most of my files are on a cloud so if it would work, I can do that. What should I do?
View 6 Replies View RelatedI plugged in my new videocard and installed the drivers, but I have a problem. AMD Catalyst Control Center will not open. It's really difficult because I can not do anything to set. I can not set the picture and make wider, so get on all four sides of the black screen (see picture) I must necessarily be in AMD Catalyst Control Center. I've removed the drivers and reinstalled, but I can unfortunately not get in AMD Catalyst Control Center (settings).
View 9 Replies View RelatedTrying to play need for speed, the game had black corners around it, it wasn't in full screen, so i decided to go to CCC and tried messing around with it's settings perhaps i could get the Full screen back and noticed that i had so many options/settings missing in it, like it wasn't as same as it was in windows 7, below is screen shots of it and my driver, I also tried uninstalling it and the AMD RADEON 6300M Driver and cleaning the AMD reg files and re-installing it but nothing seems to work.
View 8 Replies View RelatedDo I need to enable the AMD driver Catalyst on the startup menu and have it running in the background of my machine? IF not necessary, does it benefit in anyway if the software is running?
View 5 Replies View RelatedI'm sure I'm not the only one with this issue - Using 8.1 on a notebook with amd Trinity APU [A6-4400m] - all the display related Fn Keys are defeated. The non-display-related Fn + keys work. I can use CCC to manipulate external monitors, brightness, etc ok but it is not a good solution.
Plug in HDMI to external monitor and I get, by default, both.. both set non-optimally. must manually defeat the onboard display, change settings on external, reset overscan, etc etc etc
I had to recently refresh Windows 8.1 so I had to go re-download AMD Catalyst Control Center. When I did this, I opened it up and there is only around two category settings which are "Performance" and "Power" and this is with "Advance settings" turned on. I use to have around 7 categories of settings to mess around with. If I recall, one was called "VGA Display Settings" and it let me position my screen, which I direly need.
Where did all the other settings go?
I've only got the tabs Pinned and Presets on my AMD Catalyst Control Center. I've done some looking around and I'm sure that I should have more options, more tabs, be able to optimize graphics and stuff for games.
------------------------
Here's some screenshots
------------------------
I think that's all the information I have.
I am having trouble with my computer. A message pops up that Catalyst control center: host application has stopped working. And my PC will inform me when it is working. So I try to restart but it says that the host application is preventing the computer from restarting even though I know that it is not turned on. The problem is that it slows down my computer and even after I think I have solved it it goes back to not working.
The problem has caused me to not being able to use the internet. Also on occasion, when attempting to restart or shut down it took longer than 10 hours (I did not wait for it to complete I then manually shut it down). I have tried resetting it to a date where my computer functioned fine several times but it only solves the problem for a short period.
Specifications
Hp envy m6
windows 8.1
intel core i5
amd Radeon HD
driver is acpi x64
I've upgraded to Windows 8 Enterprise and started to receive errors of my GPU.
The screen go black for couple of seconds and then this error pop up : [URL] .....
I had this error many times as you can see : [URL] ......
Details of most recent error : [URL] ......
What could be the reason of this error?
My PC Spec
Windows 8 Ent. 64x
Gigabyte GA-G41MT-S2
Intel Core2 Duo E7500
ADATA DDR3 2x2GB
AMD Radeon HD 6450 >> driver 13.4
Today our Windows 8.1 system stopped and crashed when watching a video on the internet. The system was not able to restart and the screen has green lines. Please see some photo's. Once I got a message (of which I did not make a photo) about error video ftr or something like that. Cannot refresh installation since I have no Windows 8/Windows 8.1 dvd. It was a download from MS (image) and upgrade to Windows 8.1 When I start windows normally webcam light flashes and HD light flashes but screen remains black.
What steps to take? I cannot see the logfile since I cannot connect to the PC from my iMac anymore.
I recently installed Windows 8.1 and it turned out that I could'nt find suitable drivers for the graphics card of my laptop which is GMA 4500, part of Mobile Intel Series 4. After a bit of reading, I found out that many others are also on the same ship as me.
Previously I tried the drivers from Intel Download Center and the modified drivers from eightforums but both of them gave me an error which read something like 'an error occurred while registering one or more components'.
Now that I have the right drivers, or at least right for my laptop, I am sharing them with others here. I have successfully tested a software that requires OpenGL2.0 with these drivers and it works great!
You most probably don't need a custom certificate installer! I did'nt need one. These drivers are digitally signed.
DRIVER DOWNLOAD
FOR 64 BIT WINDOWS
Mobile Intel Series 4 Driver x64
Version 15.15.3.64.1855
7z File(12.97mb) Link Dead
Archive Password: digitalamerica.us
FOR 32 BIT WINDOWS
Mobile Intel Series 4 Driver x86
Version 15.15.3.1855
7z File(15.52mb) Link Dead
Archive Password: digitalamerica.us
INSTALLATION
1. Unzip 7z archive
2. Run Setup.exe
TROUBLESHOOTING : If you run into an error telling you that you dont have the correct operating system(unlikely to occur), just run the Setup.exe in compatibility mode for Windows 7.
Today, I got a new graphics card for my computer that is about 5 years old. Here are my specs:
Dell Inspiron 530
Intel Core 2 Duo e2500 2.33 GHz Processor
NEW GPU: MSI Geforce GT 440 (N440GT)
OLD GPU: NVIDIA Geforce 8600GT
3GB ram
300 watt power supply (unsure of 12V ratings)
Windoes 8 Pro 64bit
I installed my GT440 into my computer today, and the card worked fine when there was no drivers installed. I uninstalled my older drivers from my 8600 and installed drivers for the 440. When I restarted, I got the BSOD with an error message saying VIDEO_DTR_FALIURE. What does this message mean, and what can I do to fix this BSOD problem? This didnt happen on my old card, but it does on my new card? Is there a problem with my power supply, or is it an issue with the drivers?
So this is what I get when logging into my game after doing some driver updates which I did after installing a GeForce 8400gs on an Acer Aspire xc600.
c:windownssystem32
vd3dum.dll is either not designed to run on windows or it contains an error. try installing the program again using the original instillation media or contact your system administrator or the software vendor for support. Error status 0xc000012f.
(The top of this error box says) archeage.exe - bad image
I have a very serious issue with my brand new Lenovo IdeaPad Y500 GT 650M SLI system (specs at the bottom) . I can't play games at all because my system will lock up as soon as I enter the game, requiring a hard reset. My Windows Action Center is filled with Video Hardware Error reports. Is this because of a bad video card or is it a driver/software issue? I am on a clean install of Windows 8 Pro and have already tried the 314.22 WHQL and 320.00 BETA drivers. Nothing is overclocked.
View 4 Replies View RelatedMy computer is hp envy dv6 7280sf notebook with 2 GPUs intel graphics HD 4000 and Nvidia Gefoce 630 M running windows 8 64x.
After making an free upgrade online for windows 8.1 which run successfully, both gpus were ok...
But after receiving a windows update with new drivers for intel graphics 4000 gpu , after install and restart , the computer freezes on blank black screen at windows startup with no mouse or anything only backlight.
So safemode was succeful but i figured that the update for windos update was the cause and graphics drivers were installed so i removed the drivers for intel graphics and itried to reboot the computer so the restart was succeful but the intel graphics card was unistalled and no drivers were automatically installed so i tried to download and install the drivers from hp and intel website for windows 8.1 however the install fails.
Automatic install from device manager failed both online and from computer and even from manual driver selection.
So therefore the install failed in safe mode , and the high def audio device ( on screen audio possibly) failed and the device was not recongnized (no drivers installed) so i'm stuck without anydrivers for the integrated gpu and the games are no longer able to run normally even if the nvidia card is on.
I tried downloading an installing Windows 8 drives but it failed to install also , for instance any new install of drovers seems to fail for me even for external usb hard drive.
I'm building a system for cryptocoin mining, and am having a little problem with getting Windows 8.1 (home, not pro) to run the 3rd card (GPU) My equipment is:
Gigabyte 990 FXA UD3 MOBO
AMD Vishera CPU
2x4 gig Corsair Ram
3x Sapphire r9 280x Video cards
1000w Corsair PSU
Scandisk SSD
All parts are brand new.
Here is the problem... everything boots just fine and runs with 2 of the GPU's installed. I have the latest AMD 13.12 drivers, and the AMD APP SKD installed. When I add the 3rd GPU though, windows will auto detect it as a Radeon 7900 with the caution sign, AND/OR a r9 200 series card, also with the caution sign, most times BOTH. Then it randomly freezes the system. A couple of times I got it to run long enough just by luck I guess, to install the 13.12 drivers on the 3rd GPU, but then in a few minuites the system would freeze again.
2 GPU's run just fine, the problem only shows up when the 3rd card is installed, and it happens on any of the 4 16x slots, or both 1x slots on the MOBO. It doesn't matter if the GPU's are directly on the MOBO, or on 1x16 risers. There are plenty of folks running this set up with up to 6 GPU's, so I know it can be done, but I must be missing something somewhere in the windows set up.
I've got a bit of a strange issue that I haven't had with previous OSes on this PC. I'm running a Dell OptiPlex 380 with Win 8 x64 at the office and I have to run 2 video cards for all of my screens. I have a GeForce 8400GS in the PCI-E slot and a GeForce 6200 in the PCI slot.
Previous to the Win 8 install, it worked fine. Booted exactly as I had shut it off. Now, with 8 - it's killing my PCI-E card presumably when it puts the screens to sleep when I leave for the day. So I'm coming in to all of my windows being moved to the PCI card's monitor (only one hooked to it) and I have to reboot to get PCI-E card to come back.
If I check the screen properties, I see only the screen hooked to the PCI card. I've changed the setting in the BIOS for the first video card to Auto and also tried the PCI-E selection and it's the same either way.
Why on earth would it default to the PCI card rather than the PCI-E card?
i am on windows 8.i am using HP laptop.this is my ccc version.
i got 2 problems:well first one is that i can't update to windows 8.1 as the update always hang on 82% and after that my laptop
automatically shutsdown i don't know whats the reason is and that's why i am stuck at windows 8 till now although have 8.1 ISO but i don't want to install it as i have to erase my my windows 8 which came pres-installed so i will loose my genuine windows 8 .now i want to know what if i open the 8.1 installer and install it from a virtual tool like Deamon although it gives an option to keep files app setting safe but i fear that it would conflict with 8 and i would have to format my laptop then ok now to the major problem i just recently purchased Watch Dogs and installed it.I played the first mission and got busted so the mission failed and it began to reload and then a error pops up saying watch dogs have stopped working upon googling i found out that this is due to DUAl AMD Graphics so they stated that i should disable it but i cant find any option of disabling DUAL Graphics.
My windows keeps on pop up "Windows explorer crashing" then click send or don't send report...
View 1 Replies View RelatedWindows 8 Pro, latest updates.
Strange error message in last couple days on startup, sometimes at other times.
Explorer.exe (in title bar of message)
In message section-yellow triangle with exclamation point, followed by "Windows can't find the target".
What target?
Explorer is working, as I can open a folder, etc.
I tried SFC /scannow, and it reported no problems.
A Google search of the term found no hits.
Suddenly my toshiba windows 8 laptop was like corrupted and there is a message error came out like this 0xc000000e and I could not logon to my system already. I do not have a recovery disk with me and maybe there is any other way to restore my laptop.
View 1 Replies View RelatedI purchased a new laptop last week: Lenovo G500.it has Windows 8 pre-installed.at present i am still using the pre-installed McAfee Internet security programme for my AV;i have successfully done all updates(which are set to automatic)
However-despite 5 attempts to free upgrade to 8.1 i am still getting the Error Code 0x80072ee2 message and installation fails. on checking this out i am finding 'fixes' but these require installation of 'repair tool' type applications(only operable if bought etc).
When you try to delete WLM messages you get this error
"An unknown error has occurred" and the message cannot be deleted.
People with this problem, often need to delete multiple messages or entire folders. That error appears because WLM only thinks it has that/those message(s), but actually that message is nowhere to be found in the the Windows email folders. The message exists no longer, but WLM still shows it as being in its own folders and you simply cannot delete it using the normal procedure.
For the easier way, one can drag the unwanted and non-existing emails to the Deleted Items folder, one by one. However, that is crazy when you have to get rid of hundreds or thousands of them (yes, I had that situation!).
This is how to trick WLM if you want to delete multiple emails giving you that error:
1. We try to simulate forwarding multiple messages. Select multiple emails by clicking on one and then using SHIFT to click and select multiple concatenated messages. Do that screen after screen (scroll down/up). Stop when you see the FORWARD button has become grey. That means one email is even more stubborn and doesn't even want to be forwarded.
2. Hold the SHIFT key and click the messages up and down until you find the culprit. It will be just outside your selection, when your selection manages to un-grey the Forward button.
3. With a lot of messages selected and concatenated, click on the Forward button. You'll get another error message "One or more messages could not be attached. Select OK to continue creating the note." Click Cancel.
4. Now something has unblocked those messages (or message information) and, with the selection on, you can Delete them by simply clicking the Red X (delete) button.
5. The message that made the Forward button grey, can now be deleted as well.
6. Keep doing that until you finish the bunch of messaged you wanted to delete when you got the initial error.
I have been getting an error message when the computer shuts down, how to fix the problem? Could this be related to sleep issues the computer is having?
View 3 Replies View RelatedAs of late I have been getting the Error Message
"Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item."
I frequently Copy or "Cut and Paste" Files from one HDD to another and to this day never had any problems doing so.
I just Installed a fresh copy of Windows 8.1 Pro (retail) to my C Drive and am assuming that it must be a setting inside Windows 8 that I am not seeing.
The Admin Account on this Machine is Disabled. I did not change it it was that way after Install.
My Sapphire AMD HD 7870 just bit the dust so it has been sent back with an RMA. I had hoped to replace it with an ASUS AMD HD 3850 but Windows 8.1 will not work with it. There is an error message on a blue screen something about a header (I don't have the exact error message today).
I suspected it was a driver problem so uninstalled the existing driver and tried to install the latest AMD one. I can uninstall OK but as soon as I reboot the Microsoft driver installs itself giving me no opportunity to install the AMD one.
I just bought an Nvidia 620 card today. I run both Linux and Windows on my system. When I go to Linux, everything work fine. But in Windows 8, the GPU fan start to scream. Its too noisy! I even updated the drivers.
View 9 Replies View RelatedI open the Store, open the charm bar and navigate to settings. I click on the "Your account" option and the sign-in button apears on screen. When I click it, nothing happens. Absolutely nothing. I have to close the screen to exit the page.
Furthermore, when I search for an app and click the "install" button for that perticular app, the Store crashes; closing down immediately.
I already ran sfc /scannow but no problems found. I also ran the wsreset.exe but also to no avail.
I tried switching to my MS account, same issue. So am now back on a local account.
It has to do something with the account or a policy that is active on my account I assume ?
I am getting a BSOD since one week randomly with the message IRQL_NOT_LESS_OR_EQUAL. BlueScreen Viewer showes me, that it is caused by the driver ntoskrnl.exe. Before I got this BSOD I updated my Windows 8.1 to Windows 8.1.1 . Since this time, this error happens randomly!
My system specs are the following:
Laptop: Asus S400 CA
CPU: Intel Core I5 3317 U @ 1,70 GHz
Memory: 8 GB
Graphics: Intel HD Grpahics 4000
Mainbord: Asustek S400 CA
Antivirus: Avast! Internet Security (Version: 140512-0)
Before I got this IRQL_NOT_LESS_OR _EQUAL error I also got the BSOD Driver_Power_State_Failure. I figured out, that it might be the Bluetooth Driver, as buescreenviewer stated the driver causing the error is btfilter.sys.
I attached also a SF Diagnostic Tool File!.