Graphic Cards :: AMD / Catalyst Defeats Fn Keys Display Control In 8.1?
Jan 6, 2014
I'm sure I'm not the only one with this issue - Using 8.1 on a notebook with amd Trinity APU [A6-4400m] - all the display related Fn Keys are defeated. The non-display-related Fn + keys work. I can use CCC to manipulate external monitors, brightness, etc ok but it is not a good solution.
Plug in HDMI to external monitor and I get, by default, both.. both set non-optimally. must manually defeat the onboard display, change settings on external, reset overscan, etc etc etc
I plugged in my new videocard and installed the drivers, but I have a problem. AMD Catalyst Control Center will not open. It's really difficult because I can not do anything to set. I can not set the picture and make wider, so get on all four sides of the black screen (see picture) I must necessarily be in AMD Catalyst Control Center. I've removed the drivers and reinstalled, but I can unfortunately not get in AMD Catalyst Control Center (settings).
Trying to play need for speed, the game had black corners around it, it wasn't in full screen, so i decided to go to CCC and tried messing around with it's settings perhaps i could get the Full screen back and noticed that i had so many options/settings missing in it, like it wasn't as same as it was in windows 7, below is screen shots of it and my driver, I also tried uninstalling it and the AMD RADEON 6300M Driver and cleaning the AMD reg files and re-installing it but nothing seems to work.
I had to recently refresh Windows 8.1 so I had to go re-download AMD Catalyst Control Center. When I did this, I opened it up and there is only around two category settings which are "Performance" and "Power" and this is with "Advance settings" turned on. I use to have around 7 categories of settings to mess around with. If I recall, one was called "VGA Display Settings" and it let me position my screen, which I direly need.
I have an HP Envy Dv7 with windows 8, running an Intel i7 processor with an NVIDIA graphics card. I have had this laptop for about 1 year. Recently I have had an extreme case of lag with anything that i do, whether it be turning it on, signing in, or browsing the internet. I also occasionally get a popup that tells me that my catalyst control center has stopped working and that windows will close the program until it can find a solution. I haven't run a virus scan because it would take days to get that far on the internet to run it. Should I factory reset? Most of my files are on a cloud so if it would work, I can do that. What should I do?
I've only got the tabs Pinned and Presets on my AMD Catalyst Control Center. I've done some looking around and I'm sure that I should have more options, more tabs, be able to optimize graphics and stuff for games.
------------------------ Here's some screenshots ------------------------
I am having trouble with my computer. A message pops up that Catalyst control center: host application has stopped working. And my PC will inform me when it is working. So I try to restart but it says that the host application is preventing the computer from restarting even though I know that it is not turned on. The problem is that it slows down my computer and even after I think I have solved it it goes back to not working.
The problem has caused me to not being able to use the internet. Also on occasion, when attempting to restart or shut down it took longer than 10 hours (I did not wait for it to complete I then manually shut it down). I have tried resetting it to a date where my computer functioned fine several times but it only solves the problem for a short period.
Specifications Hp envy m6 windows 8.1 intel core i5 amd Radeon HD driver is acpi x64
have been using AMD Drivers 13.4, recently tried the new 13.8 Beta drivers, but Catalyst only showed tabs for CPU settings, nothing for Graphics Cards, have tried a clean install and a overwrite of the software, but still comes up the same, have finally got back to using the 13.4 Drivers but only after a lot of hassle.
Recently I turned on my computer (Acer Aspire V5 122-P) and went to change the brightness. And using the FN keys and changing the brightness returns the same value rather than changing it. The other FN keys such as Volume +/- and turning adapters on and off still work. It is just the brightness keys. I would like a fix as I need long battery life and this is causing excessive battery drain. (I have tried turning it off and on again to no avail)...
I just purchased a new windows 8 PC. I was attempting to hook the computer up to my tv through hdmi (the pc has no VGA input) and when I went through the normal paces to put the display on my tv (display desktop only on 2), the signal did not transfer and there is no display on either my tv or pc! how to revert the display back to my pc monitor without being able to see anything? Acer support was less than useful. It's an acer aspire z3-605 all-in-one pc.
The other day my son stepped on my laptop and messed up the screen. Now when it starts up I get red lines going across the screen, but can still see the bios info and the windows logo and spinning dots when Windows loads just fine, however when Windows starts I just have a blank screen. Obviously the screen was damaged, but it seems to display the lower resolution okay. I just can't lower the resolution in Windows since I can't see what I'm doing. Plugging in an external monitor doesn't work, there's no output there. Is there way to change the resolution settings if I take it the hdd and plug it into another computer as an external drive? The laptop is an Intel cpu and my other machine is an AMD cpu, so I don't think just trying to boot the laptop hard drive in the desktop would work.
I have a Lenovo Flex 14 - win 8.1 (64 bit).I have restored my pc and after the recovery the option to adjust the display brightness has "disappeared". The option is no longer in place in the charms bar or in Power Option and the adjustment keys (F11 and F12) are not working either.
I just upgraded to 8.1 and now a game that I play called theHunter wont launch. When I run the launcher it comes up with an error saying 'No Appropriate Display Modes'. It was working fine on Windows 8. The support at the Hunter hasn't been very useful and despite trying a number of different things I can't seem to solve this issue.
I'm having a terrible time after reformatting my 8.1 machine (desktop).Every time I try to adjust a display setting, such as gamma, some other process overrides it in real-time. Meaning I can't calibrate my display in windows color calibration, or even in my nvidia control panel, it instantly resets it while you're adjusting the slider. I don't know what this could possibly be, but I've uninstalled the Dell display manager, so I assume it's not the monitor overriding it. I also have nvidia control panel set to 'use other applications' for display configuration.
I use Windows 8 on a rMBP, but frequently use an external monitor that's 1080p. Since it scales 200% for the HiDPI of the rMBP, it's way too big on the external. Is there a way I can have it scale only the internal monitor, and leave the external one at 100%?
I know how to select the second screen options, however, my Surface Pro and our Samsung Laptop both running Windows 8 cannot detect a second monitor/screen. We are connecting via the HDMI port, but it will not display no matter what option we choose nor whether we run it from the desktop or apps. This is what we use for work to display presentations for clients.
Both primary and secondary displays are 1080p, native. Windows says both are running at 1920x1080, but I can visually see the secondary display is running a lower resolution. The GPU is GeForce GTX 560M, with the latest drivers. I didn't have this issue with Windows 7.
My problem is that I can't change resolution on my laptop's display with win 8. It's quite an old, Toshiba Satellite M70. I installed win 8 directly from XP. Everything is working fine except this. I tried to install the old drivers in compatibility mode, but says the system requirement is not enough. Do I have any chance to make it work?
I'm using Windows 8.1pro,also I use HDMI to sometime output video files on a TV screen,that works fine. HDMI cable is always plugged in,primary display is set to my computer monitor.I don't always use TV screen and because of existing cable connection my OS extends image to second screen and my mouse cursor alway disappear when it goes to borders,that is an annoying situation,is there a way to disable/eanble extend display on second screen without unplug the cable,just like I can set default output sound device (computer/hdmi sound) ?
i bought new computer few days ago.i have sapphire HD 7750 2gb ddr3 - and im installed the driver for that by the CD but after i want to play some games . i get this massage Display driver stopped responding and has recovered.
I have a laptop where my LCD is broken on the left side, but the right side works fine. Is there a way I can change my display to only show on the right side? I've managed to make the display horizontally smaller, but I can't figure out how to change the center to the right side. This is annoying because I have to re-size every window every time I open it, and then I have to constantly scroll back and forth on web pages. I'd rather be able to maximize and have it only on the right side. See the attached picture to see what I'm talking about.
I am on a laptop with a gtx 765m. I am trying to connect a thunderbolt port to a display port monitor. My understanding is that thunderbolt is backwards compatible with display port. But, for the life of me I can not get it to work.
I am using a minidisplay port -> display port cord.
I have ended up hooking the monitor up with an hdmi cord for now. FYI the monitor is a 2560x1440 monitor if that matters.
I amm using windows 8.1 64 bit and everytime I open Photoshop cs6 for the time after a boot I get this message 'Display driver has stopped working but has recovered', my system can handle photoshop so I know thats not the problem. My graphics card is a AMD Radeon HD 8330.