Graphic Cards :: Display Settings Being Overrided?
Jul 6, 2014
I'm having a terrible time after reformatting my 8.1 machine (desktop).Every time I try to adjust a display setting, such as gamma, some other process overrides it in real-time. Meaning I can't calibrate my display in windows color calibration, or even in my nvidia control panel, it instantly resets it while you're adjusting the slider. I don't know what this could possibly be, but I've uninstalled the Dell display manager, so I assume it's not the monitor overriding it. I also have nvidia control panel set to 'use other applications' for display configuration.
View 1 Replies
ADVERTISEMENT
Sep 14, 2013
I just purchased a new windows 8 PC. I was attempting to hook the computer up to my tv through hdmi (the pc has no VGA input) and when I went through the normal paces to put the display on my tv (display desktop only on 2), the signal did not transfer and there is no display on either my tv or pc! how to revert the display back to my pc monitor without being able to see anything? Acer support was less than useful. It's an acer aspire z3-605 all-in-one pc.
View 5 Replies
View Related
Aug 25, 2014
I have a Lenovo Flex 14 - win 8.1 (64 bit).I have restored my pc and after the recovery the option to adjust the display brightness has "disappeared". The option is no longer in place in the charms bar or in Power Option and the adjustment keys (F11 and F12) are not working either.
View 2 Replies
View Related
Oct 24, 2013
Just upgraded to 8.1. Now, it won't let me extend my desktop to a second display like I had with 8.0 ....
View 9 Replies
View Related
Nov 18, 2013
I just upgraded to 8.1 and now a game that I play called theHunter wont launch. When I run the launcher it comes up with an error saying 'No Appropriate Display Modes'. It was working fine on Windows 8. The support at the Hunter hasn't been very useful and despite trying a number of different things I can't seem to solve this issue.
View 2 Replies
View Related
Dec 18, 2013
I use Windows 8 on a rMBP, but frequently use an external monitor that's 1080p. Since it scales 200% for the HiDPI of the rMBP, it's way too big on the external. Is there a way I can have it scale only the internal monitor, and leave the external one at 100%?
View 3 Replies
View Related
Oct 10, 2013
I know how to select the second screen options, however, my Surface Pro and our Samsung Laptop both running Windows 8 cannot detect a second monitor/screen. We are connecting via the HDMI port, but it will not display no matter what option we choose nor whether we run it from the desktop or apps. This is what we use for work to display presentations for clients.
View 3 Replies
View Related
Jun 11, 2013
How can I enlarge the display, at present it is only using a strip down the middle. Pointless having a nice big screen.
View 3 Replies
View Related
Apr 3, 2013
Original error message: "Display driver NVIDIA Kernel Mode Driver, Version 314.22 stopped responding and has succesfully recovered"
I'm getting this error again and again, mainly in games. (Which seems logic, they use the graphics card most) Games without DX11 will continue after a black screen has occured, but at very low FPS.
Games with DX11 will just crash and stop working after the same black screen.
View 4 Replies
View Related
Aug 23, 2013
Both primary and secondary displays are 1080p, native. Windows says both are running at 1920x1080, but I can visually see the secondary display is running a lower resolution. The GPU is GeForce GTX 560M, with the latest drivers. I didn't have this issue with Windows 7.
View 1 Replies
View Related
Jul 3, 2013
My problem is that I can't change resolution on my laptop's display with win 8. It's quite an old, Toshiba Satellite M70. I installed win 8 directly from XP. Everything is working fine except this. I tried to install the old drivers in compatibility mode, but says the system requirement is not enough. Do I have any chance to make it work?
View 5 Replies
View Related
Apr 9, 2014
I'm using Windows 8.1pro,also I use HDMI to sometime output video files on a TV screen,that works fine. HDMI cable is always plugged in,primary display is set to my computer monitor.I don't always use TV screen and because of existing cable connection my OS extends image to second screen and my mouse cursor alway disappear when it goes to borders,that is an annoying situation,is there a way to disable/eanble extend display on second screen without unplug the cable,just like I can set default output sound device (computer/hdmi sound) ?
View 3 Replies
View Related
May 22, 2014
i bought new computer few days ago.i have sapphire HD 7750 2gb ddr3 - and im installed the driver for that by the CD but after i want to play some games . i get this massage Display driver stopped responding and has recovered.
View 8 Replies
View Related
Jul 13, 2014
I have a laptop where my LCD is broken on the left side, but the right side works fine. Is there a way I can change my display to only show on the right side? I've managed to make the display horizontally smaller, but I can't figure out how to change the center to the right side. This is annoying because I have to re-size every window every time I open it, and then I have to constantly scroll back and forth on web pages. I'd rather be able to maximize and have it only on the right side. See the attached picture to see what I'm talking about.
View 2 Replies
View Related
Jan 9, 2014
I am on a laptop with a gtx 765m. I am trying to connect a thunderbolt port to a display port monitor. My understanding is that thunderbolt is backwards compatible with display port. But, for the life of me I can not get it to work.
I am using a minidisplay port -> display port cord.
I have ended up hooking the monitor up with an hdmi cord for now. FYI the monitor is a 2560x1440 monitor if that matters.
View 4 Replies
View Related
Jan 30, 2014
I amm using windows 8.1 64 bit and everytime I open Photoshop cs6 for the time after a boot I get this message 'Display driver has stopped working but has recovered', my system can handle photoshop so I know thats not the problem. My graphics card is a AMD Radeon HD 8330.
View 9 Replies
View Related
Jun 2, 2013
For last couple days I've been going through a minor computer issue. I wasn't doing anything special, I just turned the computer off. And the next day the problem occured; After bios and Windows 8 loading screen ( the little dots going round, just below the windows 8 icon ) my screen goes black and there's no signal to the display. I've already tried formatting my hdd and installing windows 8, also tried doing Reset option, from the Windows 8 troubleshot system. I can't access my Safe Mode, because it tells that Windows can't finish the installation in safe mode ( After installing the new system I format all the data and it goes just fine until the windows icon and "Preparin your devices" sign. It goes 100% and gets black again.
View 7 Replies
View Related
Jan 22, 2013
In a few weeks (I can't wait! ) I will replace my laptop with the Surface Pro.
Right now, though, I have my laptop connected to two monitors: One via VGA and other via DVI. I'm running Windows 8 Pro x64, so this all works great.
So the big question is whether it is possible to have multi-monitor support via the one-and-only DisplayPort that is on the Surface Pro? If so, what--if any--additional hardware would I need?
When I'm docked at home and using my Surface Pro as laptop, I really need to keep the functionality of using both external monitors (one is 31" and the other 29"). I would really hate to go back to only being able to use one.
View 9 Replies
View Related
Jul 25, 2014
So I'm running 2xR9 290X (crossfire) with 3xQnix Qx2710 monitors. One of the qnix monitors was purchased with HDMI/DisplayPort connectors along with the usual DVI connector (normally these monitors only come with the D-DVI input)
I had a 2 monitor (with just the two DVI-only monitors) setup for a while that was working fine.
Since installing the third monitor I'm experiencing several weird things:
- On boot, until the Windows login screen comes up (Windows 8.1), there is nothing on the non-primary DVI monitor (so my setup is my primary monitor is one of the two DVI monitors, and then the left and right monitors is another DVI-only and the DP monitor).
- If the monitors go to sleep, or I put the computer to sleep and wake it up, any windows that were on the non-primary DVI monitor are moved over to the primary DVI monitor. Windows on the DP monitor do not move in this configuration.
- Within CCC, after sleep / monitors off, I have to restart CCC's control of the color settings for the non-primary DVI monitor. (I'm forgetting what the actual button says, but it's the button under the Display color controls settings where you can manipulate the R/G/B channels - I have to use the GPU for color matching since the monitors don't have any inherent ways to change R/G/B levels
If I only connect the two DVI monitors this is not an issue.
If I connect one DVI and the DP monitor, after sleep/wake any windows that were on the DP monitor are moved over to the primary monitor (again, note that this didn't happen when all 3 monitors were connected).
I have tried the newest version of CCC, as well as the current beta version - same behavior in both.
I have tried using HDMI instead of DP - same behavior
Aspects of this sound similar to the issues discussed in this post : [URL] ......
What I don't understand is why the second DVI monitor is acting so oddly when all 3 monitors are connected. Why would there be no picture when the computer boots?
View 1 Replies
View Related
Mar 20, 2014
I'm not sure if this problem is with the GPU, but I think it might be a good place to start.
Up until recently, I was running Windows 8.1 on a custom build with the following: Athlon II X4 610E processor, Silverstone NT01-E cooler, MSI 890-GX MoBo, 4GB OCZ DDR3/1333 RAM, Zotac GeForce GT 240 GPU, AuzenTech X-Fi Home Theater Sound Card, Western Digital 2TB Caviar Green, Corsair GT 120 SSD, Samsung SH-B083 ODD, and Silverstone NightJar ST40F PSU.
With this build I noticed that there was a certain tendency for the screen to "flicker" when the video changed (ie, starting a Netflix video, a Hulu video, movie on WMC, etc). It generally occurs at the start of a video and it's conclusion, being most annoying on Hulu because it does this at the start of a segment, just before the commercial break, and during the commercials.
Since I'm transitioning to gaming on my PC, I replaced several components, upgrading to a EVGA GeForce GTX 770 DUAL SuperClocked GPU, Intel Core i5-4570 processor (stock cooler), CORSAIR Vengeance LP 16GB (2 x 8GB) RAM, ASUS Q87M-E LGA 1150 MoBo, and CORSAIR CX series CX600 600W PSU. I also reinstalled Windows 8.1.
I had hoped that this would clear up my issue as a side benefit, but that is not the case. In fact, in some instances it's frequency has increased, mostly only occurring at the times I've come to expect, but I was watching a Hulu video just a few minutes ago and the number of times the screen flickered was nearly unbearable.
View 7 Replies
View Related
Mar 3, 2014
i have a Leonovo H520 current gpu is "Radeon 5750" i recently upgraded my psu to 600w which 450 is enough for the card. but everytime im in a game my screen goes black and my game crashes and i have that error it is really annoying [URL]
View 9 Replies
View Related
Feb 26, 2014
Recently I did a full uninstall of all AMD Components to do a clean installation of the latest 14.2 Beta Drivers. After that, while installing 14.2; I keep getting this weird message saying that:
It only started after installing 14.2 and I'm even trying to install 14.1 Beta Display & Audio Drivers just to see if its just 14.2, but it seems like those drivers wont work as well.
I went to Device Manager in Control Panel - the Audio Driver & Display are not there.
My GPUs' are two 7970's & CPU is the 8-Core Black Edition FX-8150.
View 9 Replies
View Related
Jan 6, 2014
I'm sure I'm not the only one with this issue - Using 8.1 on a notebook with amd Trinity APU [A6-4400m] - all the display related Fn Keys are defeated. The non-display-related Fn + keys work. I can use CCC to manipulate external monitors, brightness, etc ok but it is not a good solution.
Plug in HDMI to external monitor and I get, by default, both.. both set non-optimally. must manually defeat the onboard display, change settings on external, reset overscan, etc etc etc
View 3 Replies
View Related
Mar 7, 2013
I just installed my new graphics cards and successfully install new driver.
Most of time i got this error on the start up of my computer. Here an image But it did happen once,when i was playing sniper elite nazi (for about 10min) and when it crashed i had to reboot because the driver didn't recover so any other games refuse to start giving DX11 failed error or just .exe crash.
All other games work properly.
I tryed to place the card in another PCIe slot but doesn't work either. I try both Driver Beta and the official one but both failed.
View 1 Replies
View Related
Apr 17, 2013
When I try to change my video adapter the only option I get is Microsoft Basic Display Adapter.
I have a Nvidia Geforce Go 7400
Specs:
Operating System: Windows 8 Pro 32-bit
System Manufacturer: Dell Inc.
System Model: Latitude D820
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A10
Processor: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz (2 CPUs), ~2.2GHz
View 2 Replies
View Related
Oct 26, 2012
Just bought Windows 8 from their web page and upgraded my win7.
My problem is that I'm stuck with a hopeless resolution because I can't install any display drivers.
As the headline says : Windows can only find "Microsoft basic display driver". When I try to install Nvidia drivers I get the "installation cannot continue" message.
I seriously doubt that it's hardware fault - it worked perfectly before the update to win 8.
Sometimes in the properties for the screen driver, the chiptype is listed as Nvidia, and sometimes it just says N/A...
Specs:
Intel core i3Mobile Intel HM55 Express chipsetNVIDIA GeForce GT425M Graphics
Here's what I've done - besides googleing for the past 5 hours...: Updated intel chipset Tried the guide here: How to Fix NVIDIA Driver Update Installer Error - YouTube ---- this got me a little further but as soon as it tries to access my tv the installation dies (the time of a gfx installation where the screen flickers) Removed the windows driver. Uninstalled old nvidia drivers.
View 7 Replies
View Related
Mar 11, 2013
I upgraded Toshiba Satellite A100-998 with XP Media Centre to Windows 8 Pro. Before upgrade the screen resolution was 1280x800 on a NVIDIA GeForce Go7300 graphics adapter.
Windows 8 pro upgrade has installed only the Standard Microsoft Graphics Adapter of 1028x600. I have searched registry for Display1_DownScalingSupported key but it does not exist.
I have attempted to find another driver on the NVIDIA and Toshiba web support but I am unsure what would be the right one. The laptop clearly can support the higher resolution, how to resolve the issue.
View 2 Replies
View Related
Oct 25, 2013
Last night I got hold of a 27" BenQ GL2750HM, so far so good. I have my main display from the DVI port to HDMI port on the screen and my secondary screen is my 60" TV which is connected through HDMI port on the graphic card into the HDMI port in my reciever.
The main scheme for my setup is like:
- Radeon 7970 DVI > HDMI Main monitor (BenQ GL2750)
- Radeon 7970 HDMI > HDMI Reciever (ONKYO TX-NR609)
- ONKYO TX-NR609 > 60" TV
So to the problem now. When the HDMI cable is connected to the graphic card, I need to have my TV ON in order for my main monitor, the BenQ, to work and if I turn off the TV the BenQ is getting black, like a standby mode, however, there is "no signal" to the monitor.
This was never a problem with my other screen, I could have the HDMI cable connected to the graphic card, the TV off and the reciever OFF without the main monitor went black.
View 5 Replies
View Related
Dec 23, 2013
I have Intel 845 Motherboard with 1GB RAM running Pentium 4 1.7ghz.
CPU working but no display, RAM is OK, fan is running, USB ports are working, Applied new thermal paste etc. But no display and monitor is also okay.
View 5 Replies
View Related
Jun 21, 2013
I installed 8 because when I first tried it I loved it, and realized that it was WAAAY faster than 7 in my usual routines and boot/shutdown times. I also like the new start menu, it's very refreshing and user-friendly (although I admit, in some aspects, it can actually be inconvenient). But anyway, on with the problem...
After a fresh install of 8, on my ASUS N53Jq, I tried to do the thing I do the most on my PC at the moment: game recordings on my HD PVR 2 Gaming Edition.
Everything, technically, went fine and the recordings were as good as they were when recorded with 7...however, due to these recordings I did, I noticed that now my PC only has two resolution settings: 1366 x 768 and 1024 x 768. And yes, I have the latest driver for my GPU...
Before I had many settings, including 1280 x 720 which is very useful for me to output into my PVR (so I can actually get a 60fps video...). I had to go to my nvidia control panel and add 720p as a custom resolution setting, which worked I guess but this is scaring me a little now...
Is this normal? Does 8 only set highest and lowest resolution? I'm betting it doesn't, and it's my PC thats the problem.
View 7 Replies
View Related
Aug 27, 2014
What is this problem with my display, it suddenly stops and have to restart my Dell Vostro 3450.
View 5 Replies
View Related
