Computer Goes To Flashing Cursor After Post Before Windows
May 29, 2012
Ive had this computer for about 5 years and recently it has started to boot up really slowly
It goes through post like normal and then hangs on a black screen with a blinking cursor in the top left for up to 3 mins (maybe more, i didnt actually time it) before the windows 7 splash screen comes up I rarely re-start my computer, but now when i do im always afraid that it wont start up with how long it sits at that screen
The stuff ive found in searching about it has been about computers that dont boot at all when they have this screen, so im worried that will happen to me Ive also found that it might be the MBR being damaged, but in all those cases the people with that problem have more than 1 OS installed, i only have 1 installed
I would just do the steps to repair the MBR but i want to make sure there isnt another/better solution before i do
The computer runs fine other than this problem I've never formatted it (i know i probably should after 5 years but i dont want to) I didnt know where to post this sort of thing, debugging seemed like the best choice
View 1 Replies
ADVERTISEMENT
Dec 23, 2011
My computer was working fine a couple days ago and all of a sudden got a terrible Trojan that would spam me with random IE ads. So I ran ad-aware and it got rid of the problem. I went to bed relieved but woke up to my computer in a black screen with just a single cursor "_" flashing. I figured it was a fluke and restarted. same problem.
So I decided to open up the computer and check the SATA drive connections. Everything looked fine but the problem still persisted. I decided that it could just be slot number 1 and moved it to slot 3. The computer would start up and go to desktop but all of my icons disappeared and the computer would just hang if I tried to open any file or go on the internet or any program.
Obviously, it was because the SATA drive was now in a new slot?? I'm not sure. But I put it back into slot 1 and went into the BIOS setup and sure enough, it was a "not detected" for slot 1. The main HDslot.
I tried to reset the BIOS using the jumper method and it still just hangs on black screen with cursor "_" flashing...
Specs:
- windows 7 ultimate edition
- Intel duel core @ 3.2ghz
- 4gb RAM
- Asus P5Q-PRO motherboard
- geforce 8800 GTX graphics card
View 14 Replies
View Related
Nov 5, 2012
I was watching a football game on firstrowsport.eu and my computer (a hp pavilion desktop) just shut down uncommanded. I waited for it to restart, and after the BIOS screen, it just had a flashing cursor. I used the disc version of PartedMagic to get into my computer and ran the fdisk-l command. [code]
View 10 Replies
View Related
Aug 15, 2012
I have an Acer aspire 5733-6607 with Intel Core i3 CPU 2.40GHz.
My mom was on it playing a game on the internet and stepped away to wash dishes when she came back it was on the black screen with the blinking cursor in the top left corner. I tried system repair disc, the recovery disc that it had me make when I first got the laptop and windows defeender offline nothing worked. I tried F8 and it goes to the black screen with acer and where I can press F2 or F12 and then back to screen with blinking cursor. I tried restoring default settings in the F2 menu also.
View 2 Replies
View Related
Nov 9, 2012
Wonder if anyone could help or provide some ideas.I'm trying to get my spare laptop to work.Every time I turn it on it just boots to a flashing cursor on a black screen.The hard drive in it is new - without windows 7 installed yet.I've tried booting from my windows 7 disk. Set optical drive to first in boot order. Just goes to flashing cursor, does not say "press any key to boot from cd" Tried booting from usb. Set usb hard drive to first in boot order. same as above.Mem test says ram is ok, reports cpu and ram amount in bios ok Laptop is hp compaq nc6320
View 5 Replies
View Related
Feb 20, 2011
System is Windows 7 home 64 bit with amd athlon II 255 Processor 3.10 GHz and 4gb of ram. Avast anti-virus. I have windows firewall on, but haven't really made any other changes.My cursor flashes the busy symbol about once every 4-5 seconds, and it does so whenever the mouse is on the desktop or anywhere it shows the regular icon. When inside this text window it changes to the text cursor and ceases to flash, however. I changed the icon only to have the new one act the same.
View 28 Replies
View Related
Aug 11, 2011
my son has a toashiba satellite pro L450D-12x it goes past set up screen then to a blank screen (in black ) with a flashing line in the left corner how can i get it to load properley? before it did this it said media cable fail or something like that and i restored bios back to restore settings and it was also turning itsself off now and again.
View 12 Replies
View Related
Nov 8, 2012
I am having trouble with my Toshiba Sattelite MG45. When I turn it on, I get a black screen with a flashing cursor. I have tried the F8 method, nothing happens. Also, I am running Windows 7 with an Intel Core. I am by no means tech savy.
View 2 Replies
View Related
Feb 15, 2012
system goes to a black screen with a flashing cursor.
View 1 Replies
View Related
Oct 5, 2011
First off I have a Dell Inspiron n7010 system running Windows 7 Home 64bit
OK the other night I shut down my system and all seemed fine until next day. I went to reboot and got the normal Dell splash screen with both the Set Up (F2) and Boot (F12) options. After the Dell screen finished it then went to load Windows, but instead I got a Black Screen with Flashing Cursor. Can't move cursor at all.
On the Dell screen I can access the Set Up (F2) bios pages. I can also access the Boot Options (F12) Page. What I can not gain access to is the Restore (F8) menus.
I did not know to make any sort of boot disk or boot repair disk so I do not have either of these and I do not know of anyone who is using windos 7 that could make me one to use. Also Dell puts the rstore on the hard drive so onlyhave a MS Works CD and a Drivers & Utilities CD l ran the diagnostics utility but forgot to plug in my computer so when it was almost done the battery must have died so will redo the test later as tired tonight as been up half the night with this issue. But for memory the first 6 of the 8 memories areas it was scanning tested fine. Will post an update later today when Iget chance to run the whole thing again!!
I know others have had this screen. Is there a solution as have spent the last day or so googling it and seems very mixed results depending on the user and their own case with this black screen w/cursor.Some have said bad hard drive (I HOPE NOT THE CASE FOR ME AT LEAST!!!) Some have said bad mother board. Some have said virus or malware Some have referenced a software update both Microsofts and also specific computer companies. So what can I do to get to my files at least to back them up that is providing the drive is OK! I do know from the boot menu my hard drive is showing in the boot menus. Does this mean that the drives OK but maybe a corrupted boot area or something?
View 9 Replies
View Related
May 26, 2012
I'm having an issue with my mouse's cursor constantly flashing the loading sign (blue circle) over and over. It only ever stops if I mouse over something that changes the normal cursor picture.
It started happening after my computer just froze randomly while playing Dota 2. I had to manually shut down the computer and when I turned it back on that is when this problem started happening.
Also, I can't do a system restore (as far as I know) because I had savepoints turned off before the issue so there is nothing to restore to.
View 7 Replies
View Related
Aug 11, 2011
Have my Dad's Fujitsu Esprimo laptop to uninstall Searchqu, Bandoo etc for him which were causing problems. That went fine, computer shut down and tried to install Windows updates. Now won't restart.Hangs on Fujitsu screen with options for "<ESC>: Diagnostic Screen, <F2>:BIOS Setup, <F12>: Boot Menu" and Blue progress bar. Progress reaches about 75% complete VERY slowly (hour) but then hangs on black screen with white cursor in top left corner. Been like that for 2 hours now.Have tried solutions from Google - click F2 then re-setting boot order in Bios to "default order", click F12 and choose different options, tried F8 for safe mode, but F8 doesn't do anything.I don't know if it's related to Searchqu, to the updates or if it's just a creepy coincidence and the computer itself is actually broken. He doesn't have a Windows7 installation cd.
View 5 Replies
View Related
Oct 10, 2012
Earlier this week my HP desktop forced shutdown while browsing the Internet using IE9. Upon reboot the HP screen loaded, afterwards a black screen with a flashing cursor appeared. I had used CTRL+ALT+DEL function in which my computer rebooted.Showed the HP screen and immediately showed the black screen with a flashing cursor. Again no mouse cursor was available. I performed a diagnostics check in which the CPU, HDD, etc. checked out, restored BIOS to factory settings, even placing the HDD as priority 1. I inserted the Windows recovery disk and attempted a start up repair, and a restore point with no favorable results. Through the recovery disks command prompt I accessed all my music and documents, so I assume the hard drive is still functioning. I'm thinking as a last resort of performing a repartitioning of my hard drive and performing a clean install of Windows 7.
View 2 Replies
View Related
Jun 12, 2011
Computer posts, then checks hard disk RAID status (Healthy), then a white blinking cursor appears on upper left corner on black screen, and hangs there forever, UNLESS i put in a Windows bootable CD, then based on my boot priority order (CD ROM, HD) it reads the CD, then it displays "Press any key to boot from CD or DVD...", for which i don't press anything, and the computer proceeds to boot Win 7 OS correctly. So basically it doesn't boot unless i just have a bootable CD in tray.
View 3 Replies
View Related
Jul 19, 2012
When the the computer turns do not see the POST process and the windows loading processOnly when the system up then seeing the Desktop After a short time.A similar process happens when doing Switch User while the screens have a black screen until it shows in this process.
View 2 Replies
View Related
Jul 20, 2010
I recently built a new gaming computer. It runs everything smoothly, but there is one glaring problem that I cannot seem to shake. My computer will at unpredictable times halt everything (freeze) for 1-3 seconds and then resume. During this time, all sound seems to be directed to a different audio port. It seemed to start with my audio. I would plug in speakers, and then I would plug in a 3.5mm headset and it would intermittently (and rapidly) detect the headset. Looking at my realtek audio software, the input that the headset was plugged into would rapidly turn on and off. Plugged speakers into that port and it worked with no problems. The headset is not to blame because I used it with no problem on my laptop. I then suspected it was a problem since I was doing dual audio output. I downloaded the newest drivers from the ASUS site for the realtek audio manager. My computer would still do the intermittent freezing. I have read some suggestions that it may be my memory configuration. I am a programmer and not a hardware specialist, so I am unfamiliar with how a memory configuration works and how to correct this problem. I downloaded a memory qvl update from the ASUS site, and it only seemed to bring up a console window for a split second before fading out.
[URL]
View 6 Replies
View Related
Jun 12, 2011
Computer posts, then checks hard disk RAID status (Healthy), then a white blinking cursor appears on upper left corner on black screen, and hangs there forever, UNLESS i put in a Windows bootable CD, then based on my boot priority order (CD ROM, HD) it reads the CD, then it displays "Press any key to boot from CD or DVD...", for which i don't press anything, and the computer proceeds to boot Win 7 OS correctly. So basically it doesn't boot unless i just have a bootable CD in tray.
View 10 Replies
View Related
Jul 19, 2012
I've always wanted to know why even when my computer is shut down & completely off that the Netgear router is still going crazy flashing like there is activity? Well if there is activity what is it?
View 2 Replies
View Related
Oct 21, 2012
Today I started up my pc and after the BIOS screen (the place where you can press f8-f11 for various options) it went to a black screen with a blinking underscore in the upper left corner and stayed there indefinitely. It did this even after reboot.
I tried using the diagnostic tool and everything it tested passed (including HDD). I did this test twice and the same results were produced.
I also googled for similar problems (one topic mentioned that the op disassembling his computer and physically tapping a chip on the motherboard caused it to work) but I have no experience with taking apart my computer and i do not want to break it accidentally. I did however chance upon a topic advising him to do a CMOS reset which apparently helped that op, so i looked through the various options on the BIOS page. There was one option (f10 I think) mentioning CMOS on its fourth sub-window, so i pressed the reset option but I'm mot entirely sure if I used the right function.
I uninstalled kaspersky pure and replaced kaspersky pure for kaspersky anti-virus yesterday, dont know if this was the cause. I am using windows 7 64 bit.
View 4 Replies
View Related
Feb 12, 2012
does anyone know what I can do about this problem?
View 1 Replies
View Related
Dec 8, 2012
what could be wrong with my computer i hit the power button and it start and it says start windows normally but when i click on it after is says windows is starting it goes to a black screen with the cursor i can move the cursor but nothing else. it goes to the black screen before it will let me even log on to my computer
View 1 Replies
View Related
Nov 15, 2012
keep having the same problem again and again, it first appeared a yaer ago and i took my computer to someone who changed the hard disk and put in another make from the original. it crashed again about a month ago and they fixed it. i cannot afford to take it to e specialist every month and i really need my computer cause i work through it. please give me a hint on what to do, i just have a black screen and i see the cursor nothing else.
View 1 Replies
View Related
Jul 10, 2011
Recently, my computer always had BSOD. It started with a freeze on my computer, cursors are not moving, suddenly the screen go blank and BSOD! I have already attached the minidump file. I don't know if this is related, but a few days ago, I updated my display driver from optional updates from Windows Update, I think the BSODs start after this. Then, I tried to install the driver from ATI website, still had the blue screen, reinstall the display driver, still had it.
View 7 Replies
View Related
May 18, 2012
my computer boots up to a black screen with a mouse. The problem is, when I boot from anything or into any option I get this. Safe Mode gets me black screen, so does booting from a Win 7 Recovery disk, everything puts me in a black screen with cursor. At first it will show Windows logo on the screen, with loading bar, then cuts out, and cursor pops up. That's it.Also, when I try to boot normally, it hangs at Windows logo, then flashes a quick blue screen then reboots.
View 1 Replies
View Related
Jan 23, 2013
I have a Dell studio XPS desktop computer with windows 7 home premium service pack 1.The processor is an Intel i5 CPU,12gb of ram,64-bit system. I have noticed that recently when I navigate to different screens the web pages will not load up fast until I move the cursor slightly. If I do not move the cursor the page takes forever to load up. I have run scans for viruses and everything comes up negative. I have also changed out the mouse but it still does the same thing. What would cause this and how can I fix the problem.
View 4 Replies
View Related
Mar 29, 2012
I have a gateway computer that is infected with a virus. I was able to load the computer in safe mode a couple of times before it no longer loaded login screen for my computer. Now when I cut the computer on there is only a black screen with a white blinking cursor. I have the avira rescue cd and have changed the seetings to boot straight from the cd rom but even after running the rescue disc the computer will not allow me to use the (f) function keys. When I press down on any of the (f) function keys there is a beeping sound but no action. I tried to use a windows reboot cd made from another computer but it does not load on the start up like the avira resue disk does.
View 1 Replies
View Related
Apr 3, 2011
just the touchpad. My problem is that sometimes, my cursor will just...jam. Like, stick in some spot on the screen. When it does that, my keyboard will also go dead, and nothing seems to revive it (holding down Ctrl+Alt+Del does nothing; nor does the Esc button). The thing is, though, activity still remains on screen. It's not like that part of it freezes up. For example, I've had it happen to me when I was on Twitter, and yet new tweets came in. And today, when I was filming myself with my webcam, it happened and I was still able to see myself moving in the webcam -- yet I couldn't do anything with the cursor or the keyboard.
View 1 Replies
View Related
Aug 15, 2012
computer wont start cursor blinking in upper left corner
View 3 Replies
View Related
Oct 21, 2010
I am trying to create a disc that will automatically install and activate Windows 7 Professional. Included in the installation disk will be several ninite installers that will install the latest versions of programs needed for my department. After windows 7 installs and activates, when the user logs onto the computer he/she needs to be prompted with options to install either Essential List of Programs Suggested List of Programs Complete List of Programs Choosing any of the three options will run Ninite Installer associated with the option. For now the prompt will be implemented as a simple VBScript. I've managed to get the unattended activation and installation step working, but I'm stuck on the prompting step. Does anyone know any way to configure the installation CD to run a script as soon as the user logs onto the computer? In case you're wondering, I'm using VLite to help create the installation CD.
View 1 Replies
View Related
Jun 30, 2012
My computer was working fine 15 hours ago, playing games and loading webpages and all that. I turned it off for the night and when I turned it back on this morning it booted properly, as per usual. So then I logged in, the screen turned black, my cursor appeared and nothing else happened. I've been trying to fix this problem all day and if I leave it for long enough it does log in properly, but I was wondering if maybe one of the start-up systems isn't working right or whether I just need to do a disc cleanup. Running Windows 7 Home Premium 32bit, and the average wait time for it to load (when it does load, which is occasional) is about half an hour. Also running Windows 7 on a Mac, because my school gave it to me for phr33 at the end of their Mac phase.
View 1 Replies
View Related
Dec 13, 2009
I was on my Compaq V2310US laptop and noticed it was running slow, so I decided to run chkdsk just for the heck of it. It appeared to freeze at around 33%(but now I dont think it did), so I turned it off. I restarted it, noticed that it just stayed at 33% for awhile and left it this time. Now when I start windows 7 ultimate, it says "starting windows" then boots to a blank screen. No welcome screen or anything.
The mouse pointer is there and my wlan button and capslock work, but the mute sound button doesnt respond. If I boot in safe mode, CLASSPNP.SYS is the last file to load and I get the same black screen problem. Im wondering why theres no AGP440.SYS.
I have the ATI M200 chipset and when I updated it awhile back, my PC did the same thing, however I was able to go into safemode and uninstall it. I got another option to update it a week later(which made windows aero work) saying the driver was for windows 7 and it worked. My advanced options are limited to the 3 safe modes and normal mode. Startup repair didnt do anything.
View 3 Replies
View Related
