Cannot Find Tcp/ip Port When Setting Up Network Printer?
Dec 11, 2012
After my computer stopped being able to print to my printer wirelessly (the printer isn't a wireless printer, but is wired to a wireless print server), I deleted the printer and tried to reinstall via the Add Printer Wizard. The printer wizard sees the printer on the network, but when I select it to install, it can't find the TCP/IP port and installation fails. How can this be?
I *can* print from this computer to the printer when connected directly via USB, and other computers can print to that printer wirelessly.
I have an HPTouch laptop and I'm trying to connect to my HP 4200 printer thru my desktop PC.I am using the laptop via wireless and can see the drives on the desktop PC but cannot print.The laptop cannot find the printer.
I have a Macbook Pro that I just loaded a clean install of Windows 7 home 64 bit using bootcamp. I also have a canon printer. I loaded the printer's software in Windows, using a USB cable connected directly to the computer. The printer prints fine. But normally I have the printer connected to an Apple Airport Express wireless network, which prints fine from the Mac side of the computer. Windows see's the Airport Express wireless network and it connects to it fine. But when in Windows and I try to print a document, it can't see the printer. The printer says it is offline. How do I make Windows locate the printer?
I have an Acer computer that the Wan miniports either were corrupted or missing. Is there web site to go to to download these drivers or do I have to reload Windows 7 or purchase a new nic card?
I can't find the port assignments in Windows 7. They're supposed to be in Device Manager between "Network adapters" and "Processors." Ports are not listed. How do I find them?
I have not been able to find which port is assigned to which device in window7.in the device manager there is no reference to show to which port a device is assigned. find a port assigned to a particular device.
I have recently downloaded Dell AIO 946 printer driver - successfully - but when I request Windows 7 pc to print a document it cannot as it can't find the printer port. Being new to this I need guidance as to how to ascertain which port is correct. Printer has USB cable connected and from port tab is using LPT1 port is this the correct one? Please help - I am totally confused????
I want to restore my Alienware R-2 to its factory setting. Here's the problem I have:
1. Alienrespawn can't find anymore my factory setting since I already have formated with the window 7 disc. 2. When I push F8 on startup, the option RESET TO FACTORY STATE is not available in repair option. 3. The Factory image is STILL on my hard drive in a separated partition.I can even explore it.
How can I have access to this image and recover my computer with it. So far, alienrespawn can't find it automaticaly.On startup, I do not have the option anymore.
I have a new Toshiba Tecra R840 on Win7 64 bit. Much of the time, it is connected to a Toshiba docking station. My printer is an older, parallel-only HP LaserJet 6L. It's connected to the PC with a Dynex parallel-to-USB cable.
Here's the thing - Windows installs a new printer driver if I plug the printer cable into a different USB port on either the PC or the docking station. So far, I have three of them. What's worse, each printer driver will only print on the USB port that was used to create it. Quite a nuisance.
Can I do something to have a single printer driver work regardless of which USB port is used?
I have had numerous customers who randomly can't print. Upon looking at their computer, the printer port will be selected on "LPT1" instead of the proper USB or TCP/IP port. I have not been able to find any correlation. This happens on Windows XP, Windows Vista, and Windows 7 on both business and residential computers. Originally I had thought that customers must be attempting repairs on their own. However, after 8 years and seeing this same thing happen to people who are afraid to even attempt to fix their own issue I believe that there must be some bug in Windows that causes this printer port to change.
I am using an HP photosmart 1215 printer w/ HP 7200C driver. Printer is not printing. It was when I first installed it but not from internet. So, I started to fool with it and it quit. Might be the incorrect port because I changed port to USB port the changed it back to LPT! printer port. Now it won't print at all.
I have an HP pavillion notebook with Windows 7 and when trying to install my Canon MX860 printer, there are no ports showing at all, neither LPT or com ports. How can i install the ports so i can connect my printer?
I just got a new computer with Windows 7 home premium. After it opens up,and is idle about 3 min. it go to sleep. Where would I find the setting to make the time longer before it go to sleep.
We have a union computer that runs on Windows 7. There are 20 + workers that have a personal user account on the computer. As the administrator I am able to setup and connect to a network printer successfully. However, if a worker wants to print, then I have to set up the printer again for his user account and the other 20 some if they want to do print something to. Isnt there an easy way to just setup the printer once so that everyone can use it on this computer, regardless of whos signed in? Once again I am using windows 7.
I'm attempting to install a retail copy of Windows 7 Ultimate 64-Bit (VPCEB15FM) or "PCG-71312L" on this laptop. However, this message appears: "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now." The problem is that I cannot find the Intel 5 Series 4 Port SATA AHCI Controller drivers for Windows 7 64-Bit to put on a floppy or USB drive. I've combed the Sony website and Google and the only Intel 5 Series 4 Port SATA AHCI Controller Drivers that can be placed on a floppy or USB are for Windows XP. Without the TXTSETUP.OEM, I'm dead in the water! The 64-Bit drivers (INDOTH-00215023-0042.EXE) are for an already installed Windows 7. BTW guys, the the BIOS settings on this laptop is as anemic as it gets, so there is really no way to optimize there..
I was trying to add an HP 1200SE printer manually by way of linksys printer server(no Win 7 updated drivers). After configuring it, it didn't work so I attempted to redo entries. I now get a message "port already exists" after I deleted the previous install. How do I delete the already in use port so I can start over? Windows 7 64 bit on just acquired Z570 Lenovo laptop.
A client of mine uses an old dos based database program that can't print to any printer that uses a USB connection, but it works fine with parallel. I've just upgraded them to Windows 7, and some of their printers (which I didn't know at the time, I wish I did), don't have compatible Windows 7 drivers. Does anybody here know of a new model printer that still can use a parallel port and works with windows 7? I know HP Laserjet 1300 works, because they have several of those, but I'm hoping I can find actual new machines (it's a longshot, I know).
While my pc is on, I plug in the usb cable of my canon pixma MP276 printer. When the usb cable contact to the usb port, the lcd monitor goes into power saving mode/sleep mode (black) immediately and never turns on again no matter what I do (clicking on mouse, pressing keys on keyboard)I then need to restart the pc and everything will be normal.
I have win 7 64 bit desktop with only serial port, com1 i guess. I have an old HP 5P laserjet that has an lpt1 parallel printer cable securely attached to it. i tried to connect a couple of adapters to the cable and plug it into the com port. I don't get any errors and it doesn't print. I took the driver from the hp site. do i need to change the com port settings (baud rate, etc...? What am I missing?
Came at work, the computer was working (it has been working 24/24 second week already) everything was fine, the internet was working no issues, but decided to restart because my Antivirus (NIS 2011) crashed and there was no icon on taskbar, after restart my network was dead, but there was network port activity (as you can see in the screen), what I tried:1. Disabled/Enabled the network2. Restarted in safe mode with networking3. Removed for about 20 seconds the power cable4. Removed/Added the Network from Device manager (with "remove driver" option)5. Downgraded to another driver from May 20116. Tried another cable7. Tried another port in the switch8. Changed from Automatic to Manual in Network Settings (added IP)9. Used the Diagnose utility (it said something wrong with the Driver) after this I downgraded to another driver and nothing changed10. Logged with another username11. All services related to network are started.All the above didn't solved my problem, what's wrong ? I really can't understand - I'm a SysAdmin myself but I never had a issue like this that I couldn't solve!
Is it possible to set up a shared printer with one laptop running Windows 7 and the other laptop running Vista? I have tried setting all the required sharing settings on both units, but without success!
So this is my home pc that I run a private network on with my brothers computer and mine. No idea now after a ran a tweak program I have public and private setup.
How do I just keep the private setting on rather then the public trash to? Also My jump drives no longer work on my computer but work on his.
I want to set up a Hot spot for my iPad on my wired internet at work. I have followed all of the steps to set up my ad hoc network but when i hit "NEXT" to actually set up the network it simply says "WINDOWS CANNOT SET UP "network name" ....Am i missing something?
I have a windows 7 desktop and an XP laptop which I want to link together. I have shared my desktop machines folders by right clicking > properties, creating a shared name and adding the user: Everyone, to my security tabs.
However, I share a house and there is a folder I wish to share but only to my laptop, not to the rest of my house. I can't work out a way of recognising the users on my laptop, if I try to add a new user the location is fixed on Chris-PC and if I try to change no other locations appear.
