Setting Up HomeGroup Or Sharing Printer With Laptops Using Windows 7 And Vista?
Dec 30, 2011
Is it possible to set up a shared printer with one laptop running Windows 7 and the other laptop running Vista? I have tried setting all the required sharing settings on both units, but without success!
View 4 Replies
ADVERTISEMENT
Apr 30, 2012
We have an ASUS Zenbook U31F. We like it, but may have to return it because we cannot get it to print to our network printer on our HomeGroup. We have a Dell Studio 17 that prints to this computer with no problem.When we attempt to print to the printer (HP OfficeJet 6100 Series), the ASUS computer downloads a driver from the server and then issues the message "Operation failed with error 0x000003e3."
1) Updating the HP printer driver.I cannot do this. Windows reports that the printer driver is included in Windows 7 and I do not need to update it (and I cannot update it - the OS will not allow me to.)
2) Attaching the printer directly to the ASUS ZenBook ASUS ZenBook can print to the HP OfficeJet 6100 if it directly connected with a USB cable. This is not an acceptable solution: my wife needs to use the printer from anywhere in the house.
3) Registry Hack.I read about a registry hack to fool Windows into thinking that the printer is already connected. I did this and the printer appears in the Devices and Printer applet. Unfortunately, the first time I attempt to use the printer, the ASUS ZenBook downloads the printer driver and fails again.
ASUS and Best Buy have been completely useless. ASUS points the finger (I am not sure which finger) to HP. Best Buy wants me to pay an additional $70 for a support contract to get the computer that I bought from them to work.The server is a home-built gaming system built on a Gigabyte motherboard - Windows 7 Ultimate 64 bit, SP1, 6GB RAM, Intel i7 920 @ 2.66 GHz.The laptop is an ASUS ZenBook U31F running Windows 7 Pro 64 bit.
View 2 Replies
View Related
Dec 1, 2009
I found it somewhat difficult to completely Unshare files and folders on my HomeGroup Network and still allow Printer sharing in Windows 7 (Home Premium).
Initial UnSharing still allowed files like those below to be viewed on other home network computers:
C:/Users/
{user x} (folder)
AppData (folder)
Default (folder
Public (folder)
desktop.ini (file)
Other computers on the home network could step through many levels of hiarchy in the AppData folder and appeared to have "Delete" access!!
To completely decouple the computers, I had to go through the following several different Sharing/Unsharing assignment locations, till I could completely break the linkage.
I would appreciate any clarifications or simplifications.
File UnShare Confusion on HomeGroup Network
There are several different Network Sharing/Protection assignment locations in Windows 7.
To prevent all sharing between computers on the Homegroup Network, but allow Printer Sharing:
1) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options.
Uncheck sharing boxes that you don’t want to share. Save changes.
2) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.
Click “Turn off Public folder sharing (people logged on to this computer can still access these folders)”.
3) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.
Choose Media streaming options.
Click “Block All” button. Turn off. Click OK.
Anomaly Note: You have to close Control Panel and repeat all step 3 again for the change to take effect.
4) Open Windows Explorer.
a) Select “C:/”, select “Users” folder with single click, then click “Share with” in toolbar.
b) Select Advanced sharing.
Under Sharing tab, select Advanced Sharing. Uncheck box labeled “Share this folder”. Apply and close.
5) Open Windows Explorer.
Select “C:/Users/”, select all folders and files under "Users", then click “Share with” in toolbar, then click “Nobody”.
6) Verify success by going to other home network computer(s) and trying to access your files and folders. You should only be able to see there is a computer and not be able to see any folders of files.
View 1 Replies
View Related
May 11, 2009
I downloaded Windows 7 RC 64 Bit Build:7100.0.090421-1700 x64.
After I installed it, I only had to install my wireless network drivers and Windows 7 downloaded the rest of all of my system. I did not have to install any driver at all.
My problem is when I try to print from my Vista 32 laptop nothing prints to my printer. Under active documents listed for my printer it just says under status | Error - Printing.
Under the ports tab on my Vista 32 laptop, the check is in the box [Windows 7 64][printer] | Local Port
Under the ports tab on my Window 7 64 Desktop, the check is in the box USB001 | Virtual printer port for USB
The 64 bit drivers for my printer are on the Windows 7 64 Desktop and the 32 bit drivers are on the Vista 32 laptop.
I do not know why I cannot share printing.
On Windows 7 64, share this printer is checked and Render print jobs on client computers is checked.
I know this seems to be a much talked about problem but I tried the best I could to follow the posted suggestions.
My Desktop has a Canon iP4600 printer.
My desktop's computer name is AGP-001 and the printer share name is CanoniP4.
View 9 Replies
View Related
Jun 12, 2011
I am running Windows 7 Ultimate and sharing a printer to other laptops running in the household using Vista and XP. I installed sp1 last weekend and then laptops stopped being able to print. Spent 3 hours on it yesterday and finally rolled back and things are now working again.I did notice that after sp1 my home group had been changed back to the "MSHOME" default. After changing it back to the exiting name, I could see the network printer and also edit files on any of the machines I had set access for. I also could set the print on the Vista release and my desktop with 7 would work just fine so no network issues. When I moved the printer back to 7, the Vista laptop would get an error while trying to load the drivers.
View 1 Replies
View Related
Jul 21, 2011
I built it mainly for my 14yo to do school work and video games on rather to replace our aging desktop which is still used also. The old machine runs 32-bit Vista while the new one is 64-bit Win7, of course. In our reorganization we moved our Canon MP610 printer to be hooked up to the new machine, but it'd be great if we could share it amongst both pc's and my older son's new laptop. I've search and read lots of sites online, but can't really find a solution to get the old pc to be able to "see" the printer to share.
View 3 Replies
View Related
Apr 30, 2009
I just reformatted my desktop with 7 and I wanted to share the attached HP PSC2355 wirelessly to my Vista lappy. I had this connected and functioning previously when the desktop was running XP but now I cant seem to get my lappy to connect to the 'home-group' to find the printer. I found some other posts of sharing a printer on a vista machine over to 7 but not from 7 over to vista. Any help would be greatly appreciated.
View 3 Replies
View Related
Nov 15, 2011
Is it possible to connect 2 laptops - one windows 7 the other xp to just share files. I've done this with 2 xp laptops easily with a cat5 cable.
We are downloading pictures from a camera to one pc and need to then transfer to the other. There's no internet involved.
What would be the best way to do this? I can't get it to work with the cat 5; crossover seems to involve the internet, usb uses transfer software and isn't what I need. I just need to copy over images from a shared folder from one laptop to another.
View 9 Replies
View Related
Jan 23, 2013
I have setup a Homegroup for a desktop and 2 laptops. All computers have joined the Homegroup and the 2 laptops can see files on the other computers. However, when I try to access the other computers from the desktop, I'm asked to sign in. I enter the other computer user's name and since neither has a password I just click on OK. Then I get a message that says I don't have permission to access the files. Why am I asked to sign-in only on my desktop? Do I need to setup passwords on the laptops?
View 9 Replies
View Related
Jan 11, 2013
I want to install my windows 7,office,photoshop,drivers and some other software on my HDD and then save everything in a separate partition of my disk so that if I want to restore my system to the point where I have everything installed and running I can boot from the disk partitions and get it all done.Pretty much what laptops do with the system restore function on boot without needing a working OS.Simply a boot that will get my windows 7,office,photoshop,drivers and some other software installed again.Laptops have this function and I would like to have it on my desktop.
View 1 Replies
View Related
Jan 11, 2013
I want to install my windows 7,office,photoshop,drivers and some other software on my HDD and then save everything in a separate partition of my disk so that if I want to restore my system to the point where I have everything installed and running I can boot from the disk partitions and get it all done.
Pretty much what laptops do with the system restore function on boot without needing a working OS. Simply a boot that will get my windows 7,office,photoshop,drivers and some other software installed again. Laptops have this function and I would like to have it on my desktop.
View 4 Replies
View Related
Sep 26, 2011
If you can't change the settings in homegroup e.g to stop document sharing, or you can't enable printer sharing then make sure your Windows Firewall is on.
I've been using a default setup of an Internet Security product with it's own filewall, but Windows woul not allow me to share a printer or change what I wanted to share.
Error message: "Printer settings could nor be saved. Opperation could not be completed (error 0x0000006d9)"
View 1 Replies
View Related
Jan 9, 2013
Home group in windows 7 pro keeps becoming active after I leave the home group. After reboot it is active again even after I disabled it. Anyone have any ideas what might cause this. I had to disable it in the services to get it to stop becoming active.
View 2 Replies
View Related
May 7, 2011
every time i change my settings on my homegroup they dont change
View 2 Replies
View Related
Nov 26, 2011
I just started up a homegroup between two wireless PCs, one laptop, one desktop. Both are joined to the Homegroup and I have turned off every setting I could find relating to password protection on both computers. I can pull off files from my laptop->PC just fine, but it doesn't happen the other way around. (Now on my laptop) I look at the homegroup tab for the desktop, and if I click on a folder (eg Music), nothing happens.
Now when I click on the "Network" tab on Windows Explorer (still on laptop), I can see both PCs on the network. When I click on the icon for my desktop, it asks for a username and password. WHAT??? I hunted down that info, found it in Windows credentials. (still on laptop) I tried entering the username and password that I found from both computers, but no dice. First off, I don't even remember setting a username and password...second, I have password protected sharing turned off on both machines.
View 1 Replies
View Related
Jun 1, 2011
On the road can I just click disconnect from the internet icon to be safe from intrusion or do I need to disable homegroup and file sharing etc?Upon arrival can I just reconnect by clicking the same icon and entering the password? I plan on unplugging her ISP cable from her modem and plugging it into my router. Will this work?
View 1 Replies
View Related
Apr 25, 2011
'm just asking straight out. [code] When I am on the laptop, I cannot cut & paste/move or delete files to or from my main PC. When I am on my main PC, I can manage all my files and actions on my laptop HD. When I am initiating actions from my PC, I am god. When I am initiating actions from my laptop, I am nothing, as I do not have permission on my destination folder.I have been doing all kinds of work arounds. I'm sure you know the drill. But I have hit a point in my setup (mainly because my laptop HD isn't huge, but my main PC HD is huge, I do a lot of media stuff, and I do 95% on my laptop) where the workarounds are such a pain, I just can't stand it. If I could directly read and write to files on my PC HD, my world would be so much simpler.I probably won't be able to remember everything, as I've been working on this on and off for quite a while, but off the top of my head:
-Set all permissions on homegroup sharing to be as permissive as I can
-Turned off password protection for sharing
-Even though UAC is turned off on both computers, I tried a "take ownership" program where I took ownership of the destination folder
-I've tried accessing it through homegroup options and network options
-I've tried going "bigger" with the sharing by sharing the entire User folder
-I've tried going "smaller" with the sharing by sharing just one tiny folder on my destination PC
-I've done every option I can find on the right click "Share With" and giving full permissions to everyone
-I've gone through Advanced Sharing in Properties and turned on every advanced sharing option I can find, giving rights to everyone I can find
-I've run the Network troubleshooter and the Homegroup Troubleshooter, both of which can see problems, but really don't know how to solve them.
-I've searched Windows knowledgebase, forums, googled here there and everywhere. At this point every permission I can lay my hands on must be open to people who don't even have computers, yet I can't access FROM my laptop TO my PC. Yet, again, I can access everything FROM my PC TO my laptop, which is only handy if my PC is the one travelling around the house with me.
View 4 Replies
View Related
Jul 15, 2009
I've been all over these boards finding little bits of help for the issue I am having, but no solution. I've tried pretty much everything.
I have TWO PC's on my network. Since I like Star Wars I named one Ziost, and the other Mandalore. I have turned on Network Discovery on both machines in the Advanced Sharing Settings. I have both machines also set to "Allow Windows to manage homegroup connections (recommended)".
I have looked through all the services recommended by others to make sure they are running. They are on both machines.
I have both machines joined to a homegroup, however Ziost was unable to create a homegroup. The error message simply just said the homegroup could not be created on that machine. So I created the homegroup on Mandalore. No problem, it created just fine and spit out a password. Ziost was able to see the homegroup and join it just fine with the password given out.
I can access Mandalores folders FROM Ziost. And on Ziost I can see Madalore in the Network in Windows Explorer.
However, on Mandalore, it says I'm in a homegroup, but there are no PC's in the homegroup. And Mandalore cannot see Ziost in the Network section of Windows Explorer.
I thought it could be the default firewall settings. But on both machines the firewall settings are identical.
What can I be missing that would allow Ziost to see (and even map a network drive) everything on Mandalore, but then not vice versa? Mandalore is my main, newer PC, so I'm trying to keep it relativly clean and device free. My older PC is Ziost, so I have all my printers and external USB HDD on it.
I have included some pictures to help aide in the troubleshooting. It's almost 2am est, so I apologize if this is a little confusing. I'll be able to check back and respond from work tomorrow.
View 2 Replies
View Related
Sep 9, 2011
Is it possible to share emails between 2 computers in a homegroup and if so, how?
View 4 Replies
View Related
Sep 2, 2009
My computer is running Windows 7 build 7100
My Brother's computer is aswell
We are both connected wirelessly to our Router/Modem (Livebox), and we are both connected to the same Homegroup (i finally managed to get them show up in Explorer), and we are both connected to WORKGROUP, as is my Dad (Vista) and our other PC (XP, wired to livebox for printer sharing).
So, i was trying to get the "Play To" feature in WMP to work with my brother and my computer, but it doesnt seem to work.
a) On my computer i can't select "Allow Remote control of my player" though i can on my Bro"s
b) In "Media Streaming Options" and "Show devices on Local Network"(default i can't see my brothers computer, and on his he can't see mine. (This is obviously the problem), but if i select "Show devices on all networks" we can see each others computers.
For some reason though, we can see our mums Kodak Photo Frame thing, and "Media Programs on this PC..."
c) In WMP on both our computers we cant see each others computers in the HomeGroup even though all media is shared, so we have to go and look in Explorer "Homegroup" - "XXX-PC" - Music
View 9 Replies
View Related
Jun 1, 2012
i want to know how when i share a movie on my homegroup i can also share subtitles for that movie since it does not have integrated in the movie itself.
I want to play the movie on my samsung TV which is connected on the group and i can play the movie but i cannot find the subtitles ( which i have on my pc and have the same name as the movies with .srt in the end )
Also. How can i play .mkv files ? i have The transformers 720p version but i cannot play it through the homegroup , but i have heard u can just by renaming , or something .
View 2 Replies
View Related
Nov 4, 2009
I have searched but not found much with what I want to set up. I currently have a wireless connection to the internet for my PC and Laptop. What I would like to do is setup a private LAN with an old router to use but be able to keep the desktop connected to both WiFi and this LAN.
The only way I have managed to do so so far is by manually setting the IP address for the LAN (disable DHCP, change IP address etc) and assigning the LAN IP address manually to my desktop/laptop, leaving the gateway fields blank. I have noticed that doing this makes my network "Unknown" to Windows 7, which then forces it into Public mode, and disables Homegroup.
Is there a way for me to accomplish what I want?
Is pretty much how I want it to work. The desktop has two NICs, the laptop does not, so I realize the laptop would be a one-or-the-other scenario.
View 3 Replies
View Related
Jan 5, 2012
i was trying to set up my home group so i got the password and put it into my other laptop it keeps saying password incorect.i've got norton internet security
View 1 Replies
View Related
Jan 13, 2012
Long story short I just want to connect my Windows Media Player/Center to my Xbox 360.I can't enable streaming from the Media Player. It wont show the button or option at all.I have also tried to open homegroup and turning on media sharing and it wont turn on. The button turns grey for a moment then it goes back to saying "Turn on media streaming".From the Windows Media Center I can get some kind of connectivity to the Xbox, but its very brief. Usually when I go to set up the extender it gets to building media library on the "Windows Media Center" then the "Xbox Windows Media Center" gives a failed to connect, retry or cancel.If I take a peek into the network from the explorer the media devices shows Xbox 360 Media Extender and it disappears within 3 seconds also another that says Xbox 360 which stays.I have tried going into services.msc and making sure UPnP, SSDP, Windows Media Player Network Sharing Service are enabled. I also disabled Windows Media Player/Center from the windows defaults to try and reinstall it.
View 1 Replies
View Related
Dec 9, 2012
I have a 128GB SSD for booting and games and a 1tb hard drive for storage. Because my OS is on my boot drive, the location for my videos folder is on the boot drive and I don't want to store my movies on my boot drive because of space constraints. I'm using homegroup to stream movies to my mother's computer. Is there any way I can stream videos from a folder in my storage drive or any alternative method for changing the root destination of the videos folder in my C drive?
View 2 Replies
View Related
Feb 5, 2011
Having difficulty with a homegroup and file sharing: one desktop PC with the family's main documents (which are on a separate drive to the system) and two laptops which need to access those documents. I've got them all seeing each other, and they can see the folders in the drive, but when I try to add files or rename files, it tells me that I need permission. I've gone through the advance settings to make sure the correct permission is selected, they all have the same workgroup name and different computer names. Sharing the printer attached to the desktop is fine.
View 1 Replies
View Related
Nov 16, 2011
I have a wireless network setup comprising of a Windows 7 desktop and a Vista laptop,Everything worked fine but I suddenly have found that my computer sharing network setup is no longer working.When I try to access my Desktop PC from my laptop the Desktop Computer PC icon shows,but when I click on it I get a message,Windows cannot access Desktop Windows has sent the request to the DNS server and that name was unknown",When I try to access the laptop from my Desktops Windows7 (control panel>network sharing center) the Laptop icon no longer shows as it did previously.
View 1 Replies
View Related
Dec 2, 2010
How to Change Windows 7 Homegroup File and Folder Sharing Settings ?
View 0 Replies
View Related
Feb 6, 2011
3 days ago, access through my laptop on my home network to my main pc suddenly stopped working. i installed and changed nothing, as a result i wiped both the laptop and pc and reinstalled Win 7 Enterprise and Win 7 Ultimate respectively and i am still getting the " you do not have permission to access ---" i have taken ownershp, turned off password enabled sharing etc to fix this and nothing has worked. the only clue i have is that it may actually be an issue with the shared drive (storage) as viewing the shared drive over the network, the properties of the drive show up as 0 bytes/files.
View 3 Replies
View Related
May 11, 2011
I have tried to share Brotherhood MFC-7420 on my Windows 7 computer with a Vista machine (both 64bit, Home Premiums). If I try to add new printer through "add printer" option, I get this error message:"The server for the 'Brother MFC-7420 USB Printer' printer does not have the correct printer driver installed. If you want to search for the proper driver, clock OK. Otherwise, click Cancel and contact your network administrator or original equipment manufacturer for the correct printer driver."I dug around in Google for awhile, and some people used the trick where they installed the printer locally and changed the port name to \ComputerNamePrinter. When I do it, it gives me an error message: "Access Denied."I updated the driver.Network discovery is on.Printer Sharing is on.Password-Protected Sharing is off.The Windows 7 machine is in a Homegroup with 2 other Windows 7 computers.I tried lowering my Windows Firewall during connection.
View 6 Replies
View Related
Jun 21, 2012
My music and movies are on my desktop (Vista64) in my bedroom. I bought a netbook to use in the family room (Windows 7) to stream and share. The homegroup workgroup won't work for me.So when I'm looking on the Windows 7 machine and many of the music files are missing. The band name is te. Under that the album name is there. But the tracks are not. Just empty folders.here's where it gets even worse. Only some of these folders appear empty. Not all. They exist on the desktop but only maybe 10% have music in them when the folders are explored on the netbook.
View 2 Replies
View Related