Running Out Of Options To Try Homegroup Sharing
Apr 25, 2011
'm just asking straight out. [code] When I am on the laptop, I cannot cut & paste/move or delete files to or from my main PC. When I am on my main PC, I can manage all my files and actions on my laptop HD. When I am initiating actions from my PC, I am god. When I am initiating actions from my laptop, I am nothing, as I do not have permission on my destination folder.I have been doing all kinds of work arounds. I'm sure you know the drill. But I have hit a point in my setup (mainly because my laptop HD isn't huge, but my main PC HD is huge, I do a lot of media stuff, and I do 95% on my laptop) where the workarounds are such a pain, I just can't stand it. If I could directly read and write to files on my PC HD, my world would be so much simpler.I probably won't be able to remember everything, as I've been working on this on and off for quite a while, but off the top of my head:
-Set all permissions on homegroup sharing to be as permissive as I can
-Turned off password protection for sharing
-Even though UAC is turned off on both computers, I tried a "take ownership" program where I took ownership of the destination folder
-I've tried accessing it through homegroup options and network options
-I've tried going "bigger" with the sharing by sharing the entire User folder
-I've tried going "smaller" with the sharing by sharing just one tiny folder on my destination PC
-I've done every option I can find on the right click "Share With" and giving full permissions to everyone
-I've gone through Advanced Sharing in Properties and turned on every advanced sharing option I can find, giving rights to everyone I can find
-I've run the Network troubleshooter and the Homegroup Troubleshooter, both of which can see problems, but really don't know how to solve them.
-I've searched Windows knowledgebase, forums, googled here there and everywhere. At this point every permission I can lay my hands on must be open to people who don't even have computers, yet I can't access FROM my laptop TO my PC. Yet, again, I can access everything FROM my PC TO my laptop, which is only handy if my PC is the one travelling around the house with me.
View 4 Replies
ADVERTISEMENT
May 7, 2011
every time i change my settings on my homegroup they dont change
View 2 Replies
View Related
Nov 26, 2011
I just started up a homegroup between two wireless PCs, one laptop, one desktop. Both are joined to the Homegroup and I have turned off every setting I could find relating to password protection on both computers. I can pull off files from my laptop->PC just fine, but it doesn't happen the other way around. (Now on my laptop) I look at the homegroup tab for the desktop, and if I click on a folder (eg Music), nothing happens.
Now when I click on the "Network" tab on Windows Explorer (still on laptop), I can see both PCs on the network. When I click on the icon for my desktop, it asks for a username and password. WHAT??? I hunted down that info, found it in Windows credentials. (still on laptop) I tried entering the username and password that I found from both computers, but no dice. First off, I don't even remember setting a username and password...second, I have password protected sharing turned off on both machines.
View 1 Replies
View Related
Jun 1, 2011
On the road can I just click disconnect from the internet icon to be safe from intrusion or do I need to disable homegroup and file sharing etc?Upon arrival can I just reconnect by clicking the same icon and entering the password? I plan on unplugging her ISP cable from her modem and plugging it into my router. Will this work?
View 1 Replies
View Related
Jul 15, 2009
I've been all over these boards finding little bits of help for the issue I am having, but no solution. I've tried pretty much everything.
I have TWO PC's on my network. Since I like Star Wars I named one Ziost, and the other Mandalore. I have turned on Network Discovery on both machines in the Advanced Sharing Settings. I have both machines also set to "Allow Windows to manage homegroup connections (recommended)".
I have looked through all the services recommended by others to make sure they are running. They are on both machines.
I have both machines joined to a homegroup, however Ziost was unable to create a homegroup. The error message simply just said the homegroup could not be created on that machine. So I created the homegroup on Mandalore. No problem, it created just fine and spit out a password. Ziost was able to see the homegroup and join it just fine with the password given out.
I can access Mandalores folders FROM Ziost. And on Ziost I can see Madalore in the Network in Windows Explorer.
However, on Mandalore, it says I'm in a homegroup, but there are no PC's in the homegroup. And Mandalore cannot see Ziost in the Network section of Windows Explorer.
I thought it could be the default firewall settings. But on both machines the firewall settings are identical.
What can I be missing that would allow Ziost to see (and even map a network drive) everything on Mandalore, but then not vice versa? Mandalore is my main, newer PC, so I'm trying to keep it relativly clean and device free. My older PC is Ziost, so I have all my printers and external USB HDD on it.
I have included some pictures to help aide in the troubleshooting. It's almost 2am est, so I apologize if this is a little confusing. I'll be able to check back and respond from work tomorrow.
View 2 Replies
View Related
Sep 9, 2011
Is it possible to share emails between 2 computers in a homegroup and if so, how?
View 4 Replies
View Related
Sep 2, 2009
My computer is running Windows 7 build 7100
My Brother's computer is aswell
We are both connected wirelessly to our Router/Modem (Livebox), and we are both connected to the same Homegroup (i finally managed to get them show up in Explorer), and we are both connected to WORKGROUP, as is my Dad (Vista) and our other PC (XP, wired to livebox for printer sharing).
So, i was trying to get the "Play To" feature in WMP to work with my brother and my computer, but it doesnt seem to work.
a) On my computer i can't select "Allow Remote control of my player" though i can on my Bro"s
b) In "Media Streaming Options" and "Show devices on Local Network"(default i can't see my brothers computer, and on his he can't see mine. (This is obviously the problem), but if i select "Show devices on all networks" we can see each others computers.
For some reason though, we can see our mums Kodak Photo Frame thing, and "Media Programs on this PC..."
c) In WMP on both our computers we cant see each others computers in the HomeGroup even though all media is shared, so we have to go and look in Explorer "Homegroup" - "XXX-PC" - Music
View 9 Replies
View Related
Jun 1, 2012
i want to know how when i share a movie on my homegroup i can also share subtitles for that movie since it does not have integrated in the movie itself.
I want to play the movie on my samsung TV which is connected on the group and i can play the movie but i cannot find the subtitles ( which i have on my pc and have the same name as the movies with .srt in the end )
Also. How can i play .mkv files ? i have The transformers 720p version but i cannot play it through the homegroup , but i have heard u can just by renaming , or something .
View 2 Replies
View Related
Nov 4, 2009
I have searched but not found much with what I want to set up. I currently have a wireless connection to the internet for my PC and Laptop. What I would like to do is setup a private LAN with an old router to use but be able to keep the desktop connected to both WiFi and this LAN.
The only way I have managed to do so so far is by manually setting the IP address for the LAN (disable DHCP, change IP address etc) and assigning the LAN IP address manually to my desktop/laptop, leaving the gateway fields blank. I have noticed that doing this makes my network "Unknown" to Windows 7, which then forces it into Public mode, and disables Homegroup.
Is there a way for me to accomplish what I want?
Is pretty much how I want it to work. The desktop has two NICs, the laptop does not, so I realize the laptop would be a one-or-the-other scenario.
View 3 Replies
View Related
Jan 13, 2012
Long story short I just want to connect my Windows Media Player/Center to my Xbox 360.I can't enable streaming from the Media Player. It wont show the button or option at all.I have also tried to open homegroup and turning on media sharing and it wont turn on. The button turns grey for a moment then it goes back to saying "Turn on media streaming".From the Windows Media Center I can get some kind of connectivity to the Xbox, but its very brief. Usually when I go to set up the extender it gets to building media library on the "Windows Media Center" then the "Xbox Windows Media Center" gives a failed to connect, retry or cancel.If I take a peek into the network from the explorer the media devices shows Xbox 360 Media Extender and it disappears within 3 seconds also another that says Xbox 360 which stays.I have tried going into services.msc and making sure UPnP, SSDP, Windows Media Player Network Sharing Service are enabled. I also disabled Windows Media Player/Center from the windows defaults to try and reinstall it.
View 1 Replies
View Related
Apr 30, 2012
We have an ASUS Zenbook U31F. We like it, but may have to return it because we cannot get it to print to our network printer on our HomeGroup. We have a Dell Studio 17 that prints to this computer with no problem.When we attempt to print to the printer (HP OfficeJet 6100 Series), the ASUS computer downloads a driver from the server and then issues the message "Operation failed with error 0x000003e3."
1) Updating the HP printer driver.I cannot do this. Windows reports that the printer driver is included in Windows 7 and I do not need to update it (and I cannot update it - the OS will not allow me to.)
2) Attaching the printer directly to the ASUS ZenBook ASUS ZenBook can print to the HP OfficeJet 6100 if it directly connected with a USB cable. This is not an acceptable solution: my wife needs to use the printer from anywhere in the house.
3) Registry Hack.I read about a registry hack to fool Windows into thinking that the printer is already connected. I did this and the printer appears in the Devices and Printer applet. Unfortunately, the first time I attempt to use the printer, the ASUS ZenBook downloads the printer driver and fails again.
ASUS and Best Buy have been completely useless. ASUS points the finger (I am not sure which finger) to HP. Best Buy wants me to pay an additional $70 for a support contract to get the computer that I bought from them to work.The server is a home-built gaming system built on a Gigabyte motherboard - Windows 7 Ultimate 64 bit, SP1, 6GB RAM, Intel i7 920 @ 2.66 GHz.The laptop is an ASUS ZenBook U31F running Windows 7 Pro 64 bit.
View 2 Replies
View Related
Dec 9, 2012
I have a 128GB SSD for booting and games and a 1tb hard drive for storage. Because my OS is on my boot drive, the location for my videos folder is on the boot drive and I don't want to store my movies on my boot drive because of space constraints. I'm using homegroup to stream movies to my mother's computer. Is there any way I can stream videos from a folder in my storage drive or any alternative method for changing the root destination of the videos folder in my C drive?
View 2 Replies
View Related
Dec 1, 2009
I found it somewhat difficult to completely Unshare files and folders on my HomeGroup Network and still allow Printer sharing in Windows 7 (Home Premium).
Initial UnSharing still allowed files like those below to be viewed on other home network computers:
C:/Users/
{user x} (folder)
AppData (folder)
Default (folder
Public (folder)
desktop.ini (file)
Other computers on the home network could step through many levels of hiarchy in the AppData folder and appeared to have "Delete" access!!
To completely decouple the computers, I had to go through the following several different Sharing/Unsharing assignment locations, till I could completely break the linkage.
I would appreciate any clarifications or simplifications.
File UnShare Confusion on HomeGroup Network
There are several different Network Sharing/Protection assignment locations in Windows 7.
To prevent all sharing between computers on the Homegroup Network, but allow Printer Sharing:
1) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options.
Uncheck sharing boxes that you don’t want to share. Save changes.
2) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.
Click “Turn off Public folder sharing (people logged on to this computer can still access these folders)”.
3) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.
Choose Media streaming options.
Click “Block All” button. Turn off. Click OK.
Anomaly Note: You have to close Control Panel and repeat all step 3 again for the change to take effect.
4) Open Windows Explorer.
a) Select “C:/”, select “Users” folder with single click, then click “Share with” in toolbar.
b) Select Advanced sharing.
Under Sharing tab, select Advanced Sharing. Uncheck box labeled “Share this folder”. Apply and close.
5) Open Windows Explorer.
Select “C:/Users/”, select all folders and files under "Users", then click “Share with” in toolbar, then click “Nobody”.
6) Verify success by going to other home network computer(s) and trying to access your files and folders. You should only be able to see there is a computer and not be able to see any folders of files.
View 1 Replies
View Related
Feb 5, 2011
Having difficulty with a homegroup and file sharing: one desktop PC with the family's main documents (which are on a separate drive to the system) and two laptops which need to access those documents. I've got them all seeing each other, and they can see the folders in the drive, but when I try to add files or rename files, it tells me that I need permission. I've gone through the advance settings to make sure the correct permission is selected, they all have the same workgroup name and different computer names. Sharing the printer attached to the desktop is fine.
View 1 Replies
View Related
Nov 16, 2011
I have a wireless network setup comprising of a Windows 7 desktop and a Vista laptop,Everything worked fine but I suddenly have found that my computer sharing network setup is no longer working.When I try to access my Desktop PC from my laptop the Desktop Computer PC icon shows,but when I click on it I get a message,Windows cannot access Desktop Windows has sent the request to the DNS server and that name was unknown",When I try to access the laptop from my Desktops Windows7 (control panel>network sharing center) the Laptop icon no longer shows as it did previously.
View 1 Replies
View Related
Dec 2, 2010
How to Change Windows 7 Homegroup File and Folder Sharing Settings ?
View 0 Replies
View Related
Dec 30, 2011
Is it possible to set up a shared printer with one laptop running Windows 7 and the other laptop running Vista? I have tried setting all the required sharing settings on both units, but without success!
View 4 Replies
View Related
Feb 6, 2011
3 days ago, access through my laptop on my home network to my main pc suddenly stopped working. i installed and changed nothing, as a result i wiped both the laptop and pc and reinstalled Win 7 Enterprise and Win 7 Ultimate respectively and i am still getting the " you do not have permission to access ---" i have taken ownershp, turned off password enabled sharing etc to fix this and nothing has worked. the only clue i have is that it may actually be an issue with the shared drive (storage) as viewing the shared drive over the network, the properties of the drive show up as 0 bytes/files.
View 3 Replies
View Related
Sep 17, 2012
So I can't turn on Network Discovery to share files etc via network. I'm on Windows 7.I googled and found one specific solution, which was to make sure several services were set to automatic and started. All but one specific service would not cooperate " FUNCTION DISCOVERY RESOURCE PUBLICATION".Alas, I googled this fix as well, it came up with a dozen suggestions, from creating a new windows account, launching applications via admin privilege, resetting nstat stuff via cmd...even copying over some new keys in the reg, and even editing one called BFE....all failed.I had this same problem on my other laptop, but samsungs running windows 7. I don't know what to do at this point. I've spent about 6 hours googling and attempting fixes.This is the error after attempting to start the service via service.msc "Windows could not start Function Discovery Resource Publication service on Local Computer error 0x80070005: Access is denied"
View 4 Replies
View Related
Jun 2, 2012
I have two computers running Windows 7 and both belong to a Homegroup. From one computer I can access both computers and from the other I can't access the other. It say's I don't have permission but I gave it everyone permission when I shared it. I can't figure out why?
View 1 Replies
View Related
Aug 31, 2011
I have a desktop that is connected to my Belkin router via wire. I have 3 laptops that are all connected to the router wirelessly. All computers have Windows 7 64bit and synched clocks. All are connected to a Home network. All 3 laptops detect that a Homegroup has been created on the wired desktop. I'm using the correct Homegroup password. All computers have discovery on. All computers have IPv4 and Ipv6 running. All services are running. Everything else I've read and tried regarding troubleshooting this issue haven't worked. All computers can see each other on the Network, but can't connect to the Homegroup.
View 9 Replies
View Related
Oct 6, 2012
I'm quite frustrated after trying to share files between my Windows 8 PC and Windows 7 Laptop. Sharing files between Windows 7 PC and laptop was flawless.
I tried creating a homegroup in Windows 7, joined it from Windows 8, when I tried to open shared files, it gave permission error. I've disabled password protection on both PC. Tried adding HomeGroupUsers$ in Advanced persmissions of folder sharing, still the same.
Tried other way round too i.e created a homegroup in Windows 8 and joined it from Windows 7. Still the same issue of permission.
View 8 Replies
View Related
Aug 3, 2012
I installed Windows 7 on my laptop, and I also have a desktop running Windows 7. I am trying to connect my laptop to my homegroup with the password for my homegroup, but my desktop will not reveal it. Is there any other place that I can find it?
View 1 Replies
View Related
Aug 28, 2011
I have an issue which I can't find anything obvious on.I have 4 Windows 7 machines, 1 x W7 Pro, 2 x W7 Home Premium & 1 x W7 Starter all in the same Homegroup.The W7 Pro machine can see all the others under Homegroup in Windows ExplorerAll 3 of the others can see each other in the same way but the W7 Pro machine isn't listedThe 3 others can access the Shares on the W7 Pro Machine by going to Network rather than Homegroup in Windows Explorer.
View 1 Replies
View Related
Aug 12, 2012
ive been getting BSODs and finally figured out how to debug it with WinDbg (x86) and set the symbols for windows but i cant read the text. ive tried reinstalling my GPU and Java but no luck. when i try to run intel driver update utility as soon as i run it i get a BSOD ive got the minidump here if anyone knows how to read it, so here you go.
Microsoft (R) Windows Debugger Version 6.2.8400.0 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:UserskalyeDesktop�81212-36504-01.dmp]
[Code].....
View 9 Replies
View Related
Nov 1, 2011
I'm just installed windows 7 on my 2009 imac through bootcamp. However there are some problems. Ive noticed when i try to play something on windows media player it will tell me that my computer is running low on memory and to close some windows. Also games run poorly if at all. I suspect its a driver issue but have gone through all the auto updates etc.
View 4 Replies
View Related
Jan 29, 2012
As I shutdown/restart my laptop, I notice it switches to a secondary desktop that has been running programs.A good example would be trying to open my Task Manager, I can Ctrl-Alt-Del and it will allow me to open Task Manager - however when I click on Task Manager, it opens on the Desktop running in the background. I can't even access the Desktop in the background, it only shows up as I'm shutting down - closing programs that I tried opening awhile ago.
View 7 Replies
View Related
Jan 5, 2012
i thought it was pretty straight forward. guess its not.i've got the password and whatnot ready from my computer so i want my laptop to connect to it. however it only says 'create a homegroup' rather then 'join homegroup.' i tried troubleshooting but that crap never really does anything. i really don't have a clue how to set this thing up. i tried to follow a Internet video however i just can't see 'join homegroup'. my laptop is on windows 7 home premium and my computer is on windows 7 ultimate. both on service pack 1 and 64bit.
View 1 Replies
View Related
May 1, 2012
I have a PC running Windows7 on which I have set up Homegroup, complete with password. I also have a laptop running Windows7 on which I tried to run Join Homegroup. I was told in the instructions to go to Start/Computer/ and click on Homegroup in the left hand column the choose Join Now in the window that comes up. There is no "Join Now" box in the window that comes up and I therefore cannot start a Homegroup. I have a Wi-Fi modem which connects me to the net wirelessly and My PC has a wireless card which works fine as far as I can tel
View 5 Replies
View Related
Jul 15, 2009
i have a pc (Windows 7 build 7100) that is connected to two printers (of which one prints (HP laserjet CP1215) and one only scans (no ink)) and it shares those printer.
My Windows 7 build 7600 (on my main pc) added the scan-printer without asking me and didn't add the other one (the only one I can print). I then disconnected this one from the other pc and looked again, no install here.
While I used build 7100 with my main pc too, it asked me: "Do you want to install HomeGroup printer?" and it worked like a charm.
Now I tried to manually add this printer and it asked me for a driver.
I installed the HP drivers but still, not working. Then, when it asked me again to point to the .inf file, i selected the one HP-driver-installation installed (to my C:Program files folder) but it said this driver is from a "non-certified" publisher (or something like this, sadly I can't reproduce this so I don't remember the exact words).
I clicked "install nonetheless" because I knew it was the right driver (printer prints perfectly from all other Windows 7 workstations).
Now when I try to connect to the printer (still not showing up in "Devices and printers" it tries to connect, looks for a driver, kinda finds one and then tells me, it can't connect.
I cannot even select a new driver or anything, I can only close the window.
On all my other pcs (I only use Windows 7 since the RC) it works and worked without problems. I miss the "Install Homegroup printer" prompt and well ...
any ideas?
ah well i installed 32bit versions of the driver and now i downloaded 64bit versions, but even after installing it doesn't work and as I've said before, I cannot manually select a driver inf file anymore, so ... I can't install the printer.
View 2 Replies
View Related
Oct 18, 2008
Microsoft had tried to get its "Castle" networking scheme into Windows Vista, but the feature will finally appear in Windows 7 as HomeGroup. Essentially a combination of workgroup networking with file and media sharing, HomeGroup makes it easier to create a home network where PCs share pictures, music, videos, documents, printers, and other resources with each other.
View 9 Replies
View Related
