Media Player 12 Not Sharing Stream / Homegroup Will Not Die?
Jan 13, 2012
Long story short I just want to connect my Windows Media Player/Center to my Xbox 360.I can't enable streaming from the Media Player. It wont show the button or option at all.I have also tried to open homegroup and turning on media sharing and it wont turn on. The button turns grey for a moment then it goes back to saying "Turn on media streaming".From the Windows Media Center I can get some kind of connectivity to the Xbox, but its very brief. Usually when I go to set up the extender it gets to building media library on the "Windows Media Center" then the "Xbox Windows Media Center" gives a failed to connect, retry or cancel.If I take a peek into the network from the explorer the media devices shows Xbox 360 Media Extender and it disappears within 3 seconds also another that says Xbox 360 which stays.I have tried going into services.msc and making sure UPnP, SSDP, Windows Media Player Network Sharing Service are enabled. I also disabled Windows Media Player/Center from the windows defaults to try and reinstall it.
I have been having some trouble with File Sharing today. I have been working on setting up my media center with XBMC. All of the media and data is stored on a home server. A large percentage of the time when I try to start a movie or something, my computer will "disconnect" from the server. It will try for several seconds and then fail, or if I tell Samba (on the server) to terminate the connection. I have tried using another computer (a laptop) and it works fine, even when the trouble computer will not work. Because of this, I do not believe it is a server-sided issue. I can also browse the folders just fine until it "disconnects". The strange thing is that when this happens and until it fails, the Computer and Network folders won't load.
I'm new to windows 7 and i want some help. I have one apacher 460 media player which i would like to connect on my homegroup so that i can stream movies from my pc.
I have two Dell laptops, both running Windows 7. I have both set up on a HomeGroup and have enabled media sharing on both as well. Network discovery is turned on for both, file and printer sharing is on, password protected sharing is off. Under WMP, I have Media Streaming on. None of my folders are hidden.
For this discussion, things with Laptop A are fine, but Laptop B is causing me some problems. I have two main issues and fear they may be related: 1. From Laptop B, I can see Laptop A in the homegroup and I can see it in WMP. I can access all of Laptop A's files and play them back with no problem. However, from Laptop A, I can see Laptop B in the Homegroup, but I can not see it in WMP. I can navigate to certain folders in explorer and see the files, but I can not play them, even though I have all sharing functions that I can think of turned on. (I do have McAfee running, but disabled the firewall in case that was the problem. It didn't help)
Also, I have a DLNA compliant device on the network that I can stream music to using the "play to" feature in WMP. From Laptop A I can play to the network speaker just fine. I can not from Laptop B. I should add that I can "see" the device in WMP from Laptop B, but when I queue a track to play, it just hangs up as if it can't communicate any further with the networked speaker.
On my machine, in Network & Sharing Centre > Advanced Sharing Settings, media sharing is disabled.The 'Windows Media Player Network Sharing Service' is also disabled.However, when a Vista machine was on my network, a pop-up appeared, saying "Windows Media Player found: MY-PC" (where MY-PC is the name of my machine).
I've tried the "EnableRemoteContentSharing" registry edit in both versions 11 and 12 of WMP, and it only seems to work with 11 (in Vista Ultimate, if that matters). In Windows 7 running WMP 12, I cannot for the life of me get network shares in my Windows Media Library to share with my other computers on my network. I've googled quite a bit and only come up with copies all over the Internet of the same Microsoft KB article about the aforementioned registry edit.
i noticed that when i open my task manager sometimes just randomly windows media player network sharing service configuration application runs, but not only 1 there is 5-6 of them all taking about the same amount.I tried looking online for tutorials i tried disabling it in registry in the processes tab but nothing would work. I am running a small home network with 2 pc one on windows 7 and one on xp but the funny thing is that even if the second one is off this process starts by itself.I am running Windows 7 Professional x64, Windows media player 12?
I wanted to ask if it is possible to set Windows media player to open as the default player inside media center.The reason that I ask this is that I find media center sound is very low quality. I am using it inside windows 7 ultimate X64. I also use Media Browser and have set it to use media player as an external player but it loses some functionality after something is played I have to restart media center and media Browser to play anything again because it will go back to menus but not play anything untill
I have two pc's- one a Windows 7 the other is a xp. I have two streamers: Boxee Box and Pop Corn Hour. Through various trial/error I have determined I can't access the workgroup from both the Windows 7 and xp on either streamer. In other words, both streamers should be able to access workgroup on my network and neither can. I have tried resetting the router, both pc's, streamers etc. All files/folders set to share. I am not an expert but it seems since both streamers can't access my workgroup, the problem might be with windows.
Everytime I tried to open [URL](my IP camera video stream file); realPlayer Basic v14 kept opening an upgrade to realPlayer Plus window. When I click on "No thanks" another window for free trial opened. This was an endless loop. The IP camera video stream is H264 format and streams just fine on my other Windows 7 PC. Well, to make a long story short; the Win 7 Pro machine did not have QuickTime player installed which provided the H264 codec needed. I installed QuickTime and the IP camera now streams via realPlayer 14. I suspect you could install any H264 codec and accomplish the same thing and avoid the Plus upgrade.
I just started up a homegroup between two wireless PCs, one laptop, one desktop. Both are joined to the Homegroup and I have turned off every setting I could find relating to password protection on both computers. I can pull off files from my laptop->PC just fine, but it doesn't happen the other way around. (Now on my laptop) I look at the homegroup tab for the desktop, and if I click on a folder (eg Music), nothing happens.
Now when I click on the "Network" tab on Windows Explorer (still on laptop), I can see both PCs on the network. When I click on the icon for my desktop, it asks for a username and password. WHAT??? I hunted down that info, found it in Windows credentials. (still on laptop) I tried entering the username and password that I found from both computers, but no dice. First off, I don't even remember setting a username and password...second, I have password protected sharing turned off on both machines.
On the road can I just click disconnect from the internet icon to be safe from intrusion or do I need to disable homegroup and file sharing etc?Upon arrival can I just reconnect by clicking the same icon and entering the password? I plan on unplugging her ISP cable from her modem and plugging it into my router. Will this work?
'm just asking straight out. [code] When I am on the laptop, I cannot cut & paste/move or delete files to or from my main PC. When I am on my main PC, I can manage all my files and actions on my laptop HD. When I am initiating actions from my PC, I am god. When I am initiating actions from my laptop, I am nothing, as I do not have permission on my destination folder.I have been doing all kinds of work arounds. I'm sure you know the drill. But I have hit a point in my setup (mainly because my laptop HD isn't huge, but my main PC HD is huge, I do a lot of media stuff, and I do 95% on my laptop) where the workarounds are such a pain, I just can't stand it. If I could directly read and write to files on my PC HD, my world would be so much simpler.I probably won't be able to remember everything, as I've been working on this on and off for quite a while, but off the top of my head:
-Set all permissions on homegroup sharing to be as permissive as I can -Turned off password protection for sharing -Even though UAC is turned off on both computers, I tried a "take ownership" program where I took ownership of the destination folder -I've tried accessing it through homegroup options and network options -I've tried going "bigger" with the sharing by sharing the entire User folder -I've tried going "smaller" with the sharing by sharing just one tiny folder on my destination PC -I've done every option I can find on the right click "Share With" and giving full permissions to everyone -I've gone through Advanced Sharing in Properties and turned on every advanced sharing option I can find, giving rights to everyone I can find -I've run the Network troubleshooter and the Homegroup Troubleshooter, both of which can see problems, but really don't know how to solve them. -I've searched Windows knowledgebase, forums, googled here there and everywhere. At this point every permission I can lay my hands on must be open to people who don't even have computers, yet I can't access FROM my laptop TO my PC. Yet, again, I can access everything FROM my PC TO my laptop, which is only handy if my PC is the one travelling around the house with me.
I've been all over these boards finding little bits of help for the issue I am having, but no solution. I've tried pretty much everything.
I have TWO PC's on my network. Since I like Star Wars I named one Ziost, and the other Mandalore. I have turned on Network Discovery on both machines in the Advanced Sharing Settings. I have both machines also set to "Allow Windows to manage homegroup connections (recommended)".
I have looked through all the services recommended by others to make sure they are running. They are on both machines.
I have both machines joined to a homegroup, however Ziost was unable to create a homegroup. The error message simply just said the homegroup could not be created on that machine. So I created the homegroup on Mandalore. No problem, it created just fine and spit out a password. Ziost was able to see the homegroup and join it just fine with the password given out.
I can access Mandalores folders FROM Ziost. And on Ziost I can see Madalore in the Network in Windows Explorer.
However, on Mandalore, it says I'm in a homegroup, but there are no PC's in the homegroup. And Mandalore cannot see Ziost in the Network section of Windows Explorer.
I thought it could be the default firewall settings. But on both machines the firewall settings are identical.
What can I be missing that would allow Ziost to see (and even map a network drive) everything on Mandalore, but then not vice versa? Mandalore is my main, newer PC, so I'm trying to keep it relativly clean and device free. My older PC is Ziost, so I have all my printers and external USB HDD on it.
I have included some pictures to help aide in the troubleshooting. It's almost 2am est, so I apologize if this is a little confusing. I'll be able to check back and respond from work tomorrow.
We are both connected wirelessly to our Router/Modem (Livebox), and we are both connected to the same Homegroup (i finally managed to get them show up in Explorer), and we are both connected to WORKGROUP, as is my Dad (Vista) and our other PC (XP, wired to livebox for printer sharing).
So, i was trying to get the "Play To" feature in WMP to work with my brother and my computer, but it doesnt seem to work.
a) On my computer i can't select "Allow Remote control of my player" though i can on my Bro"s
b) In "Media Streaming Options" and "Show devices on Local Network"(default i can't see my brothers computer, and on his he can't see mine. (This is obviously the problem), but if i select "Show devices on all networks" we can see each others computers.
For some reason though, we can see our mums Kodak Photo Frame thing, and "Media Programs on this PC..."
c) In WMP on both our computers we cant see each others computers in the HomeGroup even though all media is shared, so we have to go and look in Explorer "Homegroup" - "XXX-PC" - Music
i want to know how when i share a movie on my homegroup i can also share subtitles for that movie since it does not have integrated in the movie itself.
I want to play the movie on my samsung TV which is connected on the group and i can play the movie but i cannot find the subtitles ( which i have on my pc and have the same name as the movies with .srt in the end )
Also. How can i play .mkv files ? i have The transformers 720p version but i cannot play it through the homegroup , but i have heard u can just by renaming , or something .
I have searched but not found much with what I want to set up. I currently have a wireless connection to the internet for my PC and Laptop. What I would like to do is setup a private LAN with an old router to use but be able to keep the desktop connected to both WiFi and this LAN.
The only way I have managed to do so so far is by manually setting the IP address for the LAN (disable DHCP, change IP address etc) and assigning the LAN IP address manually to my desktop/laptop, leaving the gateway fields blank. I have noticed that doing this makes my network "Unknown" to Windows 7, which then forces it into Public mode, and disables Homegroup.
Is there a way for me to accomplish what I want?
Is pretty much how I want it to work. The desktop has two NICs, the laptop does not, so I realize the laptop would be a one-or-the-other scenario.
We have an ASUS Zenbook U31F. We like it, but may have to return it because we cannot get it to print to our network printer on our HomeGroup. We have a Dell Studio 17 that prints to this computer with no problem.When we attempt to print to the printer (HP OfficeJet 6100 Series), the ASUS computer downloads a driver from the server and then issues the message "Operation failed with error 0x000003e3."
1) Updating the HP printer driver.I cannot do this. Windows reports that the printer driver is included in Windows 7 and I do not need to update it (and I cannot update it - the OS will not allow me to.)
2) Attaching the printer directly to the ASUS ZenBook ASUS ZenBook can print to the HP OfficeJet 6100 if it directly connected with a USB cable. This is not an acceptable solution: my wife needs to use the printer from anywhere in the house.
3) Registry Hack.I read about a registry hack to fool Windows into thinking that the printer is already connected. I did this and the printer appears in the Devices and Printer applet. Unfortunately, the first time I attempt to use the printer, the ASUS ZenBook downloads the printer driver and fails again.
ASUS and Best Buy have been completely useless. ASUS points the finger (I am not sure which finger) to HP. Best Buy wants me to pay an additional $70 for a support contract to get the computer that I bought from them to work.The server is a home-built gaming system built on a Gigabyte motherboard - Windows 7 Ultimate 64 bit, SP1, 6GB RAM, Intel i7 920 @ 2.66 GHz.The laptop is an ASUS ZenBook U31F running Windows 7 Pro 64 bit.
I have a 128GB SSD for booting and games and a 1tb hard drive for storage. Because my OS is on my boot drive, the location for my videos folder is on the boot drive and I don't want to store my movies on my boot drive because of space constraints. I'm using homegroup to stream movies to my mother's computer. Is there any way I can stream videos from a folder in my storage drive or any alternative method for changing the root destination of the videos folder in my C drive?
I found it somewhat difficult to completely Unshare files and folders on my HomeGroup Network and still allow Printer sharing in Windows 7 (Home Premium).
Initial UnSharing still allowed files like those below to be viewed on other home network computers:
C:/Users/
{user x} (folder)
AppData (folder)
Default (folder
Public (folder)
desktop.ini (file)
Other computers on the home network could step through many levels of hiarchy in the AppData folder and appeared to have "Delete" access!!
To completely decouple the computers, I had to go through the following several different Sharing/Unsharing assignment locations, till I could completely break the linkage.
I would appreciate any clarifications or simplifications.
File UnShare Confusion on HomeGroup Network
There are several different Network Sharing/Protection assignment locations in Windows 7.
To prevent all sharing between computers on the Homegroup Network, but allow Printer Sharing:
1) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options.
Uncheck sharing boxes that you don’t want to share. Save changes.
2) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.
Click “Turn off Public folder sharing (people logged on to this computer can still access these folders)”.
3) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.
Choose Media streaming options.
Click “Block All” button. Turn off. Click OK.
Anomaly Note: You have to close Control Panel and repeat all step 3 again for the change to take effect.
4) Open Windows Explorer.
a) Select “C:/”, select “Users” folder with single click, then click “Share with” in toolbar.
b) Select Advanced sharing.
Under Sharing tab, select Advanced Sharing. Uncheck box labeled “Share this folder”. Apply and close.
5) Open Windows Explorer.
Select “C:/Users/”, select all folders and files under "Users", then click “Share with” in toolbar, then click “Nobody”.
6) Verify success by going to other home network computer(s) and trying to access your files and folders. You should only be able to see there is a computer and not be able to see any folders of files.
Having difficulty with a homegroup and file sharing: one desktop PC with the family's main documents (which are on a separate drive to the system) and two laptops which need to access those documents. I've got them all seeing each other, and they can see the folders in the drive, but when I try to add files or rename files, it tells me that I need permission. I've gone through the advance settings to make sure the correct permission is selected, they all have the same workgroup name and different computer names. Sharing the printer attached to the desktop is fine.
I have a wireless network setup comprising of a Windows 7 desktop and a Vista laptop,Everything worked fine but I suddenly have found that my computer sharing network setup is no longer working.When I try to access my Desktop PC from my laptop the Desktop Computer PC icon shows,but when I click on it I get a message,Windows cannot access Desktop Windows has sent the request to the DNS server and that name was unknown",When I try to access the laptop from my Desktops Windows7 (control panel>network sharing center) the Laptop icon no longer shows as it did previously.
I have VLC Portable as the default program for opening some video files, like .mp4 and .avi. And I have Foobar (portable) as the default program for .mp3.Usually the icons on .mp4, .avi, .mp3 files get updated with the icons of the assigned media players.But on this PC it's not working. They're still the same icons as if WMP was the default player.Does it have to do with the Standard user account? (Because on other PCs I run from an Admin account and I don't have such problems.)
How can I make Windows Media Player stop updating media every freaking time I start it up? It always hogs up massive amount of CPU power and goes into (Not Responding) for a min while updating.I only add media files to the Windows Explorer Library so I can get indexed searches. I don't even use WMP to view files or anything. Just to burn some music CDs sometimes.I've tried deleting the files from the WMP library but the next time I open it up, it scans and updates all my files again! Is there a way to completely purge the WMP library and make it not update ever? I've unchecked every option that seems to make it scan and update but it still does it.Basically I want to UNLINK the Windows Explorer Library from the WMP Library.
Is it possible to set up a shared printer with one laptop running Windows 7 and the other laptop running Vista? I have tried setting all the required sharing settings on both units, but without success!
