I have searched but not found much with what I want to set up. I currently have a wireless connection to the internet for my PC and Laptop. What I would like to do is setup a private LAN with an old router to use but be able to keep the desktop connected to both WiFi and this LAN.
The only way I have managed to do so so far is by manually setting the IP address for the LAN (disable DHCP, change IP address etc) and assigning the LAN IP address manually to my desktop/laptop, leaving the gateway fields blank. I have noticed that doing this makes my network "Unknown" to Windows 7, which then forces it into Public mode, and disables Homegroup.
Is there a way for me to accomplish what I want?
Is pretty much how I want it to work. The desktop has two NICs, the laptop does not, so I realize the laptop would be a one-or-the-other scenario.
I've been all over these boards finding little bits of help for the issue I am having, but no solution. I've tried pretty much everything.
I have TWO PC's on my network. Since I like Star Wars I named one Ziost, and the other Mandalore. I have turned on Network Discovery on both machines in the Advanced Sharing Settings. I have both machines also set to "Allow Windows to manage homegroup connections (recommended)".
I have looked through all the services recommended by others to make sure they are running. They are on both machines.
I have both machines joined to a homegroup, however Ziost was unable to create a homegroup. The error message simply just said the homegroup could not be created on that machine. So I created the homegroup on Mandalore. No problem, it created just fine and spit out a password. Ziost was able to see the homegroup and join it just fine with the password given out.
I can access Mandalores folders FROM Ziost. And on Ziost I can see Madalore in the Network in Windows Explorer.
However, on Mandalore, it says I'm in a homegroup, but there are no PC's in the homegroup. And Mandalore cannot see Ziost in the Network section of Windows Explorer.
I thought it could be the default firewall settings. But on both machines the firewall settings are identical.
What can I be missing that would allow Ziost to see (and even map a network drive) everything on Mandalore, but then not vice versa? Mandalore is my main, newer PC, so I'm trying to keep it relativly clean and device free. My older PC is Ziost, so I have all my printers and external USB HDD on it.
I have included some pictures to help aide in the troubleshooting. It's almost 2am est, so I apologize if this is a little confusing. I'll be able to check back and respond from work tomorrow.
We are both connected wirelessly to our Router/Modem (Livebox), and we are both connected to the same Homegroup (i finally managed to get them show up in Explorer), and we are both connected to WORKGROUP, as is my Dad (Vista) and our other PC (XP, wired to livebox for printer sharing).
So, i was trying to get the "Play To" feature in WMP to work with my brother and my computer, but it doesnt seem to work.
a) On my computer i can't select "Allow Remote control of my player" though i can on my Bro"s
b) In "Media Streaming Options" and "Show devices on Local Network"(default i can't see my brothers computer, and on his he can't see mine. (This is obviously the problem), but if i select "Show devices on all networks" we can see each others computers.
For some reason though, we can see our mums Kodak Photo Frame thing, and "Media Programs on this PC..."
c) In WMP on both our computers we cant see each others computers in the HomeGroup even though all media is shared, so we have to go and look in Explorer "Homegroup" - "XXX-PC" - Music
I have a wireless network setup comprising of a Windows 7 desktop and a Vista laptop,Everything worked fine but I suddenly have found that my computer sharing network setup is no longer working.When I try to access my Desktop PC from my laptop the Desktop Computer PC icon shows,but when I click on it I get a message,Windows cannot access Desktop Windows has sent the request to the DNS server and that name was unknown",When I try to access the laptop from my Desktops Windows7 (control panel>network sharing center) the Laptop icon no longer shows as it did previously.
3 days ago, access through my laptop on my home network to my main pc suddenly stopped working. i installed and changed nothing, as a result i wiped both the laptop and pc and reinstalled Win 7 Enterprise and Win 7 Ultimate respectively and i am still getting the " you do not have permission to access ---" i have taken ownershp, turned off password enabled sharing etc to fix this and nothing has worked. the only clue i have is that it may actually be an issue with the shared drive (storage) as viewing the shared drive over the network, the properties of the drive show up as 0 bytes/files.
How to change network type to private network in networking and sharing centre with out showing UI to the user and it need to be done pro-grammatically.
I just started up a homegroup between two wireless PCs, one laptop, one desktop. Both are joined to the Homegroup and I have turned off every setting I could find relating to password protection on both computers. I can pull off files from my laptop->PC just fine, but it doesn't happen the other way around. (Now on my laptop) I look at the homegroup tab for the desktop, and if I click on a folder (eg Music), nothing happens.
Now when I click on the "Network" tab on Windows Explorer (still on laptop), I can see both PCs on the network. When I click on the icon for my desktop, it asks for a username and password. WHAT??? I hunted down that info, found it in Windows credentials. (still on laptop) I tried entering the username and password that I found from both computers, but no dice. First off, I don't even remember setting a username and password...second, I have password protected sharing turned off on both machines.
On the road can I just click disconnect from the internet icon to be safe from intrusion or do I need to disable homegroup and file sharing etc?Upon arrival can I just reconnect by clicking the same icon and entering the password? I plan on unplugging her ISP cable from her modem and plugging it into my router. Will this work?
'm just asking straight out. [code] When I am on the laptop, I cannot cut & paste/move or delete files to or from my main PC. When I am on my main PC, I can manage all my files and actions on my laptop HD. When I am initiating actions from my PC, I am god. When I am initiating actions from my laptop, I am nothing, as I do not have permission on my destination folder.I have been doing all kinds of work arounds. I'm sure you know the drill. But I have hit a point in my setup (mainly because my laptop HD isn't huge, but my main PC HD is huge, I do a lot of media stuff, and I do 95% on my laptop) where the workarounds are such a pain, I just can't stand it. If I could directly read and write to files on my PC HD, my world would be so much simpler.I probably won't be able to remember everything, as I've been working on this on and off for quite a while, but off the top of my head:
-Set all permissions on homegroup sharing to be as permissive as I can -Turned off password protection for sharing -Even though UAC is turned off on both computers, I tried a "take ownership" program where I took ownership of the destination folder -I've tried accessing it through homegroup options and network options -I've tried going "bigger" with the sharing by sharing the entire User folder -I've tried going "smaller" with the sharing by sharing just one tiny folder on my destination PC -I've done every option I can find on the right click "Share With" and giving full permissions to everyone -I've gone through Advanced Sharing in Properties and turned on every advanced sharing option I can find, giving rights to everyone I can find -I've run the Network troubleshooter and the Homegroup Troubleshooter, both of which can see problems, but really don't know how to solve them. -I've searched Windows knowledgebase, forums, googled here there and everywhere. At this point every permission I can lay my hands on must be open to people who don't even have computers, yet I can't access FROM my laptop TO my PC. Yet, again, I can access everything FROM my PC TO my laptop, which is only handy if my PC is the one travelling around the house with me.
i want to know how when i share a movie on my homegroup i can also share subtitles for that movie since it does not have integrated in the movie itself.
I want to play the movie on my samsung TV which is connected on the group and i can play the movie but i cannot find the subtitles ( which i have on my pc and have the same name as the movies with .srt in the end )
Also. How can i play .mkv files ? i have The transformers 720p version but i cannot play it through the homegroup , but i have heard u can just by renaming , or something .
So this is my home pc that I run a private network on with my brothers computer and mine. No idea now after a ran a tweak program I have public and private setup.
How do I just keep the private setting on rather then the public trash to? Also My jump drives no longer work on my computer but work on his.
Long story short I just want to connect my Windows Media Player/Center to my Xbox 360.I can't enable streaming from the Media Player. It wont show the button or option at all.I have also tried to open homegroup and turning on media sharing and it wont turn on. The button turns grey for a moment then it goes back to saying "Turn on media streaming".From the Windows Media Center I can get some kind of connectivity to the Xbox, but its very brief. Usually when I go to set up the extender it gets to building media library on the "Windows Media Center" then the "Xbox Windows Media Center" gives a failed to connect, retry or cancel.If I take a peek into the network from the explorer the media devices shows Xbox 360 Media Extender and it disappears within 3 seconds also another that says Xbox 360 which stays.I have tried going into services.msc and making sure UPnP, SSDP, Windows Media Player Network Sharing Service are enabled. I also disabled Windows Media Player/Center from the windows defaults to try and reinstall it.
We have an ASUS Zenbook U31F. We like it, but may have to return it because we cannot get it to print to our network printer on our HomeGroup. We have a Dell Studio 17 that prints to this computer with no problem.When we attempt to print to the printer (HP OfficeJet 6100 Series), the ASUS computer downloads a driver from the server and then issues the message "Operation failed with error 0x000003e3."
1) Updating the HP printer driver.I cannot do this. Windows reports that the printer driver is included in Windows 7 and I do not need to update it (and I cannot update it - the OS will not allow me to.)
2) Attaching the printer directly to the ASUS ZenBook ASUS ZenBook can print to the HP OfficeJet 6100 if it directly connected with a USB cable. This is not an acceptable solution: my wife needs to use the printer from anywhere in the house.
3) Registry Hack.I read about a registry hack to fool Windows into thinking that the printer is already connected. I did this and the printer appears in the Devices and Printer applet. Unfortunately, the first time I attempt to use the printer, the ASUS ZenBook downloads the printer driver and fails again.
ASUS and Best Buy have been completely useless. ASUS points the finger (I am not sure which finger) to HP. Best Buy wants me to pay an additional $70 for a support contract to get the computer that I bought from them to work.The server is a home-built gaming system built on a Gigabyte motherboard - Windows 7 Ultimate 64 bit, SP1, 6GB RAM, Intel i7 920 @ 2.66 GHz.The laptop is an ASUS ZenBook U31F running Windows 7 Pro 64 bit.
I have a 128GB SSD for booting and games and a 1tb hard drive for storage. Because my OS is on my boot drive, the location for my videos folder is on the boot drive and I don't want to store my movies on my boot drive because of space constraints. I'm using homegroup to stream movies to my mother's computer. Is there any way I can stream videos from a folder in my storage drive or any alternative method for changing the root destination of the videos folder in my C drive?
I found it somewhat difficult to completely Unshare files and folders on my HomeGroup Network and still allow Printer sharing in Windows 7 (Home Premium).
Initial UnSharing still allowed files like those below to be viewed on other home network computers:
C:/Users/
{user x} (folder)
AppData (folder)
Default (folder
Public (folder)
desktop.ini (file)
Other computers on the home network could step through many levels of hiarchy in the AppData folder and appeared to have "Delete" access!!
To completely decouple the computers, I had to go through the following several different Sharing/Unsharing assignment locations, till I could completely break the linkage.
I would appreciate any clarifications or simplifications.
File UnShare Confusion on HomeGroup Network
There are several different Network Sharing/Protection assignment locations in Windows 7.
To prevent all sharing between computers on the Homegroup Network, but allow Printer Sharing:
1) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options.
Uncheck sharing boxes that you don’t want to share. Save changes.
2) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.
Click “Turn off Public folder sharing (people logged on to this computer can still access these folders)”.
3) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.
Choose Media streaming options.
Click “Block All” button. Turn off. Click OK.
Anomaly Note: You have to close Control Panel and repeat all step 3 again for the change to take effect.
4) Open Windows Explorer.
a) Select “C:/”, select “Users” folder with single click, then click “Share with” in toolbar.
b) Select Advanced sharing.
Under Sharing tab, select Advanced Sharing. Uncheck box labeled “Share this folder”. Apply and close.
5) Open Windows Explorer.
Select “C:/Users/”, select all folders and files under "Users", then click “Share with” in toolbar, then click “Nobody”.
6) Verify success by going to other home network computer(s) and trying to access your files and folders. You should only be able to see there is a computer and not be able to see any folders of files.
my girlfriends pc at her university blocks certain ports which are required by a website which she uses to watch tv online. Therefore as a work around, she bought a service which offered a VPN. This meant that she on her uni pc be connected to the uni internet, however then open a VPN connection which meant she would then be connected to this VPN and browse the internet through them whom do no block ports.
My question is could someone please advise me on how to do this, I have WIndows 7 and she has XP Pro. I tried setting up my pc as a host, allocating her a username and password and allowing incoming connections etc. however upon trying to get hers to connect to me, it just timed out and could not connect!
I would appreciate if someone could give me a step by step guide on how to set up my PC as the host and her PC as the client, in order for her to browse the internet using my internet, not her universities. I don't want remote desktop as dont want her having control and seing my desktop, just sharing my internet.
Having difficulty with a homegroup and file sharing: one desktop PC with the family's main documents (which are on a separate drive to the system) and two laptops which need to access those documents. I've got them all seeing each other, and they can see the folders in the drive, but when I try to add files or rename files, it tells me that I need permission. I've gone through the advance settings to make sure the correct permission is selected, they all have the same workgroup name and different computer names. Sharing the printer attached to the desktop is fine.
I have been searching the 'Net to no avail - is there any way I can access a private folder over a home network? I have a private folder on my desktop that I would like to access over my network, but don't want others to be able to access it. All of our computers (desktop, laptop, netbook) are all on the same homegroup.
Is it possible to set up a shared printer with one laptop running Windows 7 and the other laptop running Vista? I have tried setting all the required sharing settings on both units, but without success!
I have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.My internet connection is working and has no issues.
Network and Sharing Center - Open Network and Sharing Center - Open and refreshed Network and Sharing Center - Closed
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
I disabled my network adapter then restarted and now the adapter is no longer showing up in my network connections. How in the world do I get it back? I have looked at other options (like under the registry which was suggested on a couple of places). I have never seen this happen before. I even reinstalled my drivers and still nothing. How do I enable it again?
I have a linksys usb600n (v2) using the Windows 7 driver from linksys. It installs and is displayed correctly in Device Manger - BUT it doesn't appear in the Network and Sharing Center as an adapter. This same device and driver were previously working just fine in this system - but I rebuilt the OS (clean install) after testing a number of security products out.
The initial install went fine - no problems that I remember - just plug in the adapter and install the drivers obtained from Linksys (Ver 3.00.01.0). I tried the same thing on the re-build and it looks fine until I go into the Network Center and can't set up wireless networking since the adapter does not appear.
SIW shows TWO (2) linksys USB adapters under Hardware/Network Adapters, but does not show the network adapters in the Network Information section.
There are three computers. One is a desktop connected through a LAN. The 2 laptops is connected through wireless from the modem from the desktop. Anyways, one of the laptops has the printer. My laptop can only see the desktop. The laptop connected to the printer can see both the my laptop and the desktop. Lastly the desktop cannot see anything. Sorry if this is confusing. Anyone know why it's not detected. I need to print something out.
I'm quite frustrated after trying to share files between my Windows 8 PC and Windows 7 Laptop. Sharing files between Windows 7 PC and laptop was flawless.
I tried creating a homegroup in Windows 7, joined it from Windows 8, when I tried to open shared files, it gave permission error. I've disabled password protection on both PC. Tried adding HomeGroupUsers$ in Advanced persmissions of folder sharing, still the same.
Tried other way round too i.e created a homegroup in Windows 8 and joined it from Windows 7. Still the same issue of permission.
I want to add additional icons to the 'system32pnidui.dll' file. That's where you pick which icon you want to represent the active named network in the Network And Sharing Center. I did a search in this forum on 'network icons' but didn't find anything. Aside from all the permissions restrictions what app can be used and what kind(s) of files will work in W7? I have lots of .png images that I would like to use if they will work. Lenovo T500 W7 Pro-64 Current Updates.
