Homegroup - Change File And Folder Sharing Settings
Dec 2, 2010How to Change Windows 7 Homegroup File and Folder Sharing Settings ?
View 0 RepliesHow to Change Windows 7 Homegroup File and Folder Sharing Settings ?
View 0 RepliesOn the road can I just click disconnect from the internet icon to be safe from intrusion or do I need to disable homegroup and file sharing etc?Upon arrival can I just reconnect by clicking the same icon and entering the password? I plan on unplugging her ISP cable from her modem and plugging it into my router. Will this work?
View 1 Replies View Relatedhave 1 computer operating 7 ultimate and 1 operating home premium cannot connect to the laptop under home premium. On the laptop when i go into change homegroup settings all boxes except printers are un-ticked. When I tick all the boxes then 'save changes' all seems ok until I go into change homegroup settings again I find all the boxes except printers are un-ticked again. I can't seem to keep these boxes ticked - I suspect this is why I cant access the laptop within the homegroup.
View 3 Replies View RelatedHaving difficulty with a homegroup and file sharing: one desktop PC with the family's main documents (which are on a separate drive to the system) and two laptops which need to access those documents. I've got them all seeing each other, and they can see the folders in the drive, but when I try to add files or rename files, it tells me that I need permission. I've gone through the advance settings to make sure the correct permission is selected, they all have the same workgroup name and different computer names. Sharing the printer attached to the desktop is fine.
View 1 Replies View Related3 days ago, access through my laptop on my home network to my main pc suddenly stopped working. i installed and changed nothing, as a result i wiped both the laptop and pc and reinstalled Win 7 Enterprise and Win 7 Ultimate respectively and i am still getting the " you do not have permission to access ---" i have taken ownershp, turned off password enabled sharing etc to fix this and nothing has worked. the only clue i have is that it may actually be an issue with the shared drive (storage) as viewing the shared drive over the network, the properties of the drive show up as 0 bytes/files.
View 3 Replies View Relatedwindows file & folder sharing
View 3 Replies View RelatedIs there any way to make a reg file that I can tweak ALL the windows explorer views to show just the following: Name | Size | Date modifiedWindows drives me crazy with it's "defaults" for various views.
View 2 Replies View Relatedi just recieved my computer back from service because my hard drive needed to be replaced. i did not notice this until just now, but my system user name was not changed back to the default "user" after they had finished the service.so my question is, how do I change the file name of my Windows 7 user folder? im talking about the one in C/Users. one is called "public" and the other one - which should have a lock next to it, it the one I want to change. I do not want this file to be called "[tech support person's name]" but either "user" or my own name.I have changed one user name via Control Panel/User Accounts/Change your account name, but it did not rename that file.Is it wise to rename this folder, or am I just stuck with a random person's name as the name of my user file?
View 2 Replies View Relatedevery time i change my settings on my homegroup they dont change
View 2 Replies View RelatedI just started up a homegroup between two wireless PCs, one laptop, one desktop. Both are joined to the Homegroup and I have turned off every setting I could find relating to password protection on both computers. I can pull off files from my laptop->PC just fine, but it doesn't happen the other way around. (Now on my laptop) I look at the homegroup tab for the desktop, and if I click on a folder (eg Music), nothing happens.
Now when I click on the "Network" tab on Windows Explorer (still on laptop), I can see both PCs on the network. When I click on the icon for my desktop, it asks for a username and password. WHAT??? I hunted down that info, found it in Windows credentials. (still on laptop) I tried entering the username and password that I found from both computers, but no dice. First off, I don't even remember setting a username and password...second, I have password protected sharing turned off on both machines.
'm just asking straight out. [code] When I am on the laptop, I cannot cut & paste/move or delete files to or from my main PC. When I am on my main PC, I can manage all my files and actions on my laptop HD. When I am initiating actions from my PC, I am god. When I am initiating actions from my laptop, I am nothing, as I do not have permission on my destination folder.I have been doing all kinds of work arounds. I'm sure you know the drill. But I have hit a point in my setup (mainly because my laptop HD isn't huge, but my main PC HD is huge, I do a lot of media stuff, and I do 95% on my laptop) where the workarounds are such a pain, I just can't stand it. If I could directly read and write to files on my PC HD, my world would be so much simpler.I probably won't be able to remember everything, as I've been working on this on and off for quite a while, but off the top of my head:
-Set all permissions on homegroup sharing to be as permissive as I can
-Turned off password protection for sharing
-Even though UAC is turned off on both computers, I tried a "take ownership" program where I took ownership of the destination folder
-I've tried accessing it through homegroup options and network options
-I've tried going "bigger" with the sharing by sharing the entire User folder
-I've tried going "smaller" with the sharing by sharing just one tiny folder on my destination PC
-I've done every option I can find on the right click "Share With" and giving full permissions to everyone
-I've gone through Advanced Sharing in Properties and turned on every advanced sharing option I can find, giving rights to everyone I can find
-I've run the Network troubleshooter and the Homegroup Troubleshooter, both of which can see problems, but really don't know how to solve them.
-I've searched Windows knowledgebase, forums, googled here there and everywhere. At this point every permission I can lay my hands on must be open to people who don't even have computers, yet I can't access FROM my laptop TO my PC. Yet, again, I can access everything FROM my PC TO my laptop, which is only handy if my PC is the one travelling around the house with me.
I've been all over these boards finding little bits of help for the issue I am having, but no solution. I've tried pretty much everything.
I have TWO PC's on my network. Since I like Star Wars I named one Ziost, and the other Mandalore. I have turned on Network Discovery on both machines in the Advanced Sharing Settings. I have both machines also set to "Allow Windows to manage homegroup connections (recommended)".
I have looked through all the services recommended by others to make sure they are running. They are on both machines.
I have both machines joined to a homegroup, however Ziost was unable to create a homegroup. The error message simply just said the homegroup could not be created on that machine. So I created the homegroup on Mandalore. No problem, it created just fine and spit out a password. Ziost was able to see the homegroup and join it just fine with the password given out.
I can access Mandalores folders FROM Ziost. And on Ziost I can see Madalore in the Network in Windows Explorer.
However, on Mandalore, it says I'm in a homegroup, but there are no PC's in the homegroup. And Mandalore cannot see Ziost in the Network section of Windows Explorer.
I thought it could be the default firewall settings. But on both machines the firewall settings are identical.
What can I be missing that would allow Ziost to see (and even map a network drive) everything on Mandalore, but then not vice versa? Mandalore is my main, newer PC, so I'm trying to keep it relativly clean and device free. My older PC is Ziost, so I have all my printers and external USB HDD on it.
I have included some pictures to help aide in the troubleshooting. It's almost 2am est, so I apologize if this is a little confusing. I'll be able to check back and respond from work tomorrow.
Is it possible to share emails between 2 computers in a homegroup and if so, how?
View 4 Replies View RelatedMy computer is running Windows 7 build 7100
My Brother's computer is aswell
We are both connected wirelessly to our Router/Modem (Livebox), and we are both connected to the same Homegroup (i finally managed to get them show up in Explorer), and we are both connected to WORKGROUP, as is my Dad (Vista) and our other PC (XP, wired to livebox for printer sharing).
So, i was trying to get the "Play To" feature in WMP to work with my brother and my computer, but it doesnt seem to work.
a) On my computer i can't select "Allow Remote control of my player" though i can on my Bro"s
b) In "Media Streaming Options" and "Show devices on Local Network"(default i can't see my brothers computer, and on his he can't see mine. (This is obviously the problem), but if i select "Show devices on all networks" we can see each others computers.
For some reason though, we can see our mums Kodak Photo Frame thing, and "Media Programs on this PC..."
c) In WMP on both our computers we cant see each others computers in the HomeGroup even though all media is shared, so we have to go and look in Explorer "Homegroup" - "XXX-PC" - Music
i want to know how when i share a movie on my homegroup i can also share subtitles for that movie since it does not have integrated in the movie itself.
I want to play the movie on my samsung TV which is connected on the group and i can play the movie but i cannot find the subtitles ( which i have on my pc and have the same name as the movies with .srt in the end )
Also. How can i play .mkv files ? i have The transformers 720p version but i cannot play it through the homegroup , but i have heard u can just by renaming , or something .
I have searched but not found much with what I want to set up. I currently have a wireless connection to the internet for my PC and Laptop. What I would like to do is setup a private LAN with an old router to use but be able to keep the desktop connected to both WiFi and this LAN.
The only way I have managed to do so so far is by manually setting the IP address for the LAN (disable DHCP, change IP address etc) and assigning the LAN IP address manually to my desktop/laptop, leaving the gateway fields blank. I have noticed that doing this makes my network "Unknown" to Windows 7, which then forces it into Public mode, and disables Homegroup.
Is there a way for me to accomplish what I want?
Is pretty much how I want it to work. The desktop has two NICs, the laptop does not, so I realize the laptop would be a one-or-the-other scenario.
How to Change the File and Folder View Arrangement in Windows 7 Explorer ?
View 0 Replies View RelatedLong story short I just want to connect my Windows Media Player/Center to my Xbox 360.I can't enable streaming from the Media Player. It wont show the button or option at all.I have also tried to open homegroup and turning on media sharing and it wont turn on. The button turns grey for a moment then it goes back to saying "Turn on media streaming".From the Windows Media Center I can get some kind of connectivity to the Xbox, but its very brief. Usually when I go to set up the extender it gets to building media library on the "Windows Media Center" then the "Xbox Windows Media Center" gives a failed to connect, retry or cancel.If I take a peek into the network from the explorer the media devices shows Xbox 360 Media Extender and it disappears within 3 seconds also another that says Xbox 360 which stays.I have tried going into services.msc and making sure UPnP, SSDP, Windows Media Player Network Sharing Service are enabled. I also disabled Windows Media Player/Center from the windows defaults to try and reinstall it.
View 1 Replies View RelatedWe have an ASUS Zenbook U31F. We like it, but may have to return it because we cannot get it to print to our network printer on our HomeGroup. We have a Dell Studio 17 that prints to this computer with no problem.When we attempt to print to the printer (HP OfficeJet 6100 Series), the ASUS computer downloads a driver from the server and then issues the message "Operation failed with error 0x000003e3."
1) Updating the HP printer driver.I cannot do this. Windows reports that the printer driver is included in Windows 7 and I do not need to update it (and I cannot update it - the OS will not allow me to.)
2) Attaching the printer directly to the ASUS ZenBook ASUS ZenBook can print to the HP OfficeJet 6100 if it directly connected with a USB cable. This is not an acceptable solution: my wife needs to use the printer from anywhere in the house.
3) Registry Hack.I read about a registry hack to fool Windows into thinking that the printer is already connected. I did this and the printer appears in the Devices and Printer applet. Unfortunately, the first time I attempt to use the printer, the ASUS ZenBook downloads the printer driver and fails again.
ASUS and Best Buy have been completely useless. ASUS points the finger (I am not sure which finger) to HP. Best Buy wants me to pay an additional $70 for a support contract to get the computer that I bought from them to work.The server is a home-built gaming system built on a Gigabyte motherboard - Windows 7 Ultimate 64 bit, SP1, 6GB RAM, Intel i7 920 @ 2.66 GHz.The laptop is an ASUS ZenBook U31F running Windows 7 Pro 64 bit.
I have a 128GB SSD for booting and games and a 1tb hard drive for storage. Because my OS is on my boot drive, the location for my videos folder is on the boot drive and I don't want to store my movies on my boot drive because of space constraints. I'm using homegroup to stream movies to my mother's computer. Is there any way I can stream videos from a folder in my storage drive or any alternative method for changing the root destination of the videos folder in my C drive?
View 2 Replies View RelatedI found it somewhat difficult to completely Unshare files and folders on my HomeGroup Network and still allow Printer sharing in Windows 7 (Home Premium).
Initial UnSharing still allowed files like those below to be viewed on other home network computers:
C:/Users/
{user x} (folder)
AppData (folder)
Default (folder
Public (folder)
desktop.ini (file)
Other computers on the home network could step through many levels of hiarchy in the AppData folder and appeared to have "Delete" access!!
To completely decouple the computers, I had to go through the following several different Sharing/Unsharing assignment locations, till I could completely break the linkage.
I would appreciate any clarifications or simplifications.
File UnShare Confusion on HomeGroup Network
There are several different Network Sharing/Protection assignment locations in Windows 7.
To prevent all sharing between computers on the Homegroup Network, but allow Printer Sharing:
1) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options.
Uncheck sharing boxes that you don’t want to share. Save changes.
2) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.
Click “Turn off Public folder sharing (people logged on to this computer can still access these folders)”.
3) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.
Choose Media streaming options.
Click “Block All” button. Turn off. Click OK.
Anomaly Note: You have to close Control Panel and repeat all step 3 again for the change to take effect.
4) Open Windows Explorer.
a) Select “C:/”, select “Users” folder with single click, then click “Share with” in toolbar.
b) Select Advanced sharing.
Under Sharing tab, select Advanced Sharing. Uncheck box labeled “Share this folder”. Apply and close.
5) Open Windows Explorer.
Select “C:/Users/”, select all folders and files under "Users", then click “Share with” in toolbar, then click “Nobody”.
6) Verify success by going to other home network computer(s) and trying to access your files and folders. You should only be able to see there is a computer and not be able to see any folders of files.
Is it possible with Win7 to change any picture (Jpeg, png, bmp etc) into an icon file to use for a folder image?I just realised that its not an actual folder... its a shortcut which has a folder as an icon, Its actually a shortcut to a folder on another drive, but I'd still like to change it to an image I choose.
View 4 Replies View RelatedI have a wireless network setup comprising of a Windows 7 desktop and a Vista laptop,Everything worked fine but I suddenly have found that my computer sharing network setup is no longer working.When I try to access my Desktop PC from my laptop the Desktop Computer PC icon shows,but when I click on it I get a message,Windows cannot access Desktop Windows has sent the request to the DNS server and that name was unknown",When I try to access the laptop from my Desktops Windows7 (control panel>network sharing center) the Laptop icon no longer shows as it did previously.
View 1 Replies View RelatedIs it possible to set up a shared printer with one laptop running Windows 7 and the other laptop running Vista? I have tried setting all the required sharing settings on both units, but without success!
View 4 Replies View RelatedTwo build 7000 machines in my homegroup... One works fine and I can check/uncheck media to share in the homegroup. The laptop, however, is a different story. When I check a library to share in a home group (pictures, videos, music, etc) then click "save changes" nothing changes. When I can back into my homegroup settings, there are no check marks.
View 4 Replies View RelatedTonight discovered that my homegroup randomly and suddenly ceased to work, after working previously with no problems.After hours spent of my life I'm able to now leave the homegroup and start a new one, however I have a problem that continues to exist.On the Change Homegroup Settings page, underneath where it says "Share libraries and printers", I select ALL boxes (Pictures, Music, Videos, Printers, Documents), and hit "Save Changes" at the bottom - yet the changes are never saved.It's as if I've never selected them.The screen immediately exits me out after I hit "Save Changes", and when I re-enter the screen, all the boxes except "Printer" are blank again.This is the screen I'm referring to
View 1 Replies View RelatedMy Windows 7 Home Premium Homegroup is not accepting my settings (stuck on its own settings). I'm able to go to my Homegroup settings and CHECK the boxes for sharing video, pictures, doc.s, and music yet, When I Click save changes, it closes-out the window and when I view Settings once more.. they remain the same as before I changed them (stuck on only "Printers"). This goes for other HomeGroup Settings as well. I'v stopped and started the HomeGroup Services "Listener" and "Provider", but the Strange thing is that it is sharing those files in My HomeGroup.. just not realizing it is.. or sumthin?? Also tried Leaving HomeGroup, Rebooted, and Joined. idk, but more than likely has to do w/ the Home Premium version.. because the Ultimate edition is able to see this Home Premium Laptop as if I had my settings changed to share and stream music, etc.. the Home Premium can't see the Ultimate edition in the HomeGroup
View 1 Replies View Relatedwindows7 in "change sharing options for different network profiles" it always sets the current profile to "public" and i need it to change to "home or work" and i can not change this. it will not connect to my access point therefore. it sees the access point but will not connect. if i plug in the cable it goes with no problem to the home or work network.
View 1 Replies View RelatedI go into sharing center, advanced,etc then I turn on network discovery, click save changes, and I go right back in, and it didn't save?
View 2 Replies View RelatedI have 7 on both my laptop and tower PC, I share my entire D drive from my tower over the network (homegroup)... i like to keep a mirrored copy of the drive, so I can copy everything from the D drive to the laptop.Absolutely everything copied EXCEPT one folder. I have no idea why this folder will not copy... windows just says "you do not have permission to access"I've done this plenty of times before, never changed the attributes of the folder or anything. I recently formatted both of the systems so everything is nice and clean, no system problems or anything.
I tried moving the folder to another location on the D drive but it's still says I do not have permission... I try just sharing that particular folder, full control, but it sill says no permission.However, I've copied a few of the sub-folders to another location, and I CAN access them. So it must have something to do just with that folder
If you can't change the settings in homegroup e.g to stop document sharing, or you can't enable printer sharing then make sure your Windows Firewall is on.
I've been using a default setup of an Internet Security product with it's own filewall, but Windows woul not allow me to share a printer or change what I wanted to share.
Error message: "Printer settings could nor be saved. Opperation could not be completed (error 0x0000006d9)"