File Sharing Disconnects When Trying To Stream Media
Nov 17, 2011
I have been having some trouble with File Sharing today. I have been working on setting up my media center with XBMC. All of the media and data is stored on a home server. A large percentage of the time when I try to start a movie or something, my computer will "disconnect" from the server. It will try for several seconds and then fail, or if I tell Samba (on the server) to terminate the connection. I have tried using another computer (a laptop) and it works fine, even when the trouble computer will not work. Because of this, I do not believe it is a server-sided issue. I can also browse the folders just fine until it "disconnects". The strange thing is that when this happens and until it fails, the Computer and Network folders won't load.
Long story short I just want to connect my Windows Media Player/Center to my Xbox 360.I can't enable streaming from the Media Player. It wont show the button or option at all.I have also tried to open homegroup and turning on media sharing and it wont turn on. The button turns grey for a moment then it goes back to saying "Turn on media streaming".From the Windows Media Center I can get some kind of connectivity to the Xbox, but its very brief. Usually when I go to set up the extender it gets to building media library on the "Windows Media Center" then the "Xbox Windows Media Center" gives a failed to connect, retry or cancel.If I take a peek into the network from the explorer the media devices shows Xbox 360 Media Extender and it disappears within 3 seconds also another that says Xbox 360 which stays.I have tried going into services.msc and making sure UPnP, SSDP, Windows Media Player Network Sharing Service are enabled. I also disabled Windows Media Player/Center from the windows defaults to try and reinstall it.
WMC recording/playback and media/file sharing seems to work fine until I go to copy a file between drives, where one of those drives is currently using some of its i/o bandwidth to do media. The copy hogs the i/o bandwidth, doing nasty things to the real-time needs. How do I permanently tell Windows 7 x64 to do all [explorer] copies at a lower CPU and i/o (explorer.exe & system) priority and/or elevate WMC CPU & i/o (ehshell.exe?) and file/media sharing priorities a bit? The PC is up to date on patches/drivers and should be able to prioritize obvious applications.
I have two pc's- one a Windows 7 the other is a xp. I have two streamers: Boxee Box and Pop Corn Hour. Through various trial/error I have determined I can't access the workgroup from both the Windows 7 and xp on either streamer. In other words, both streamers should be able to access workgroup on my network and neither can. I have tried resetting the router, both pc's, streamers etc. All files/folders set to share. I am not an expert but it seems since both streamers can't access my workgroup, the problem might be with windows.
The problem I believe is that on the �change sharing options for different networkprofile page (Control Panel>Network sharing) I cannot turn on the Network discovery and File saring options. click on the two enabling buttons forTurn on File DiscoveryndTurn on File & printer sharing I then find the save changes tab greyed out
ive added the folders in windows media center id like to share but when i go on my ps3 it says its not registered or something?could we use the media center and ps3 for sharing?
On my machine, in Network & Sharing Centre > Advanced Sharing Settings, media sharing is disabled.The 'Windows Media Player Network Sharing Service' is also disabled.However, when a Vista machine was on my network, a pop-up appeared, saying "Windows Media Player found: MY-PC" (where MY-PC is the name of my machine).
I've tried the "EnableRemoteContentSharing" registry edit in both versions 11 and 12 of WMP, and it only seems to work with 11 (in Vista Ultimate, if that matters). In Windows 7 running WMP 12, I cannot for the life of me get network shares in my Windows Media Library to share with my other computers on my network. I've googled quite a bit and only come up with copies all over the Internet of the same Microsoft KB article about the aforementioned registry edit.
i noticed that when i open my task manager sometimes just randomly windows media player network sharing service configuration application runs, but not only 1 there is 5-6 of them all taking about the same amount.I tried looking online for tutorials i tried disabling it in registry in the processes tab but nothing would work. I am running a small home network with 2 pc one on windows 7 and one on xp but the funny thing is that even if the second one is off this process starts by itself.I am running Windows 7 Professional x64, Windows media player 12?
I've had Win7 64-bit Home Premium on this laptop for almost 3 years. I've had a second computer with Win7 32-bit Home Premium in the house networked for two years. Now I add a third, and I can't get file sharing to work. I can SEE files on that third computer from mine, but it won't let me move files to that computer from mine, and it won't let me save them! It says I don't have permission. My userID on this computer is "Katie" and that computer also has a user account called "Katie." The folders in question DO have sharing set (by right clicking on them) so that "Katie" has read/write permission. Why don't have have write permission, then?
I'm trying to share files between my Mac OS and my Windows 7 OS. I have both OS's on my laptop and I want to make it where I can easily transfer files between each OS. I have googled this but have found only file sharing on the same network but with different computers, not dual boot.
I got 2 PCs (A & B) both running Windows 7 ultimate networked through an ADSL2+router. On PC A, I have a folder X. On PC B, I got two user accounts: 1 and 2. I wanted to share folder X on PC A with PC B user 1 but not user 2. How do I implement it?
I am trying to share files between and old home PC running XP, to a new PC running Windows 7. Both PC's are connected directly to a router via LAN cables. I am looking to transfer all the old files and documents to the new Windows 7 PC.The Windows 7 PC currently shares files with other laptops (running Windows 7). I believe that I have setup up both PC for file sharing, but I am unable to see the other PC on either machine.On the PC with XP, I can see under 'M Network Places', the folder and file structure that would like to share.
I've read the OLD posts on this problem, and tried the 'fix' described. Doesn't work. I've reset the permissions, I've done everything I can think of, and this blasted OS will NOT allow me to change from the LOCKED/Nobody setting.
In my office there are 2 desktop (Windows 7 & XP) computers and 2 laptops (Windows 7 & XP). These computers are connected to BSNL wifi router (ADSL) which has intermittent internet connection. I have also installed 2 printers on the desktop computers, one being deskjet (Windows 7) and the other laser (XP comp). On the XP system (desktop) i've enabled printer sharing.
PS: desktop computers are connected by RJ-45 and laptops by WiFi Issue :
successfully configured other PC for printer sharing. Now the issue is as i said earlier due to intermittent internet connection remaining 3 computers are unable to print laser printer when the net is down however it works fine.
What can be done..?? Also on the XP sys (desktop) i would also like to enable a particular folder to be shared.
I have 3 computer(mine,mum and bro) all running on window 7 and connected to the same workgroup.i would like to make all d drive public.. however photo folder i wan access to mum and video folder access to bro.
I just upgraded the wifes laptop to windows 7. Will my network file sharing still be intact and able to view and share file and folders as it was doing before the upgrade.
I have created my share folders with "everyone" permissions to read, write, and modify as explained (well) here:
Share Files and Printers between Windows 7 and XP :: the How-To Geek
But when I go to copy a file from the XP computer to the Windows 7 computer I get the "Cannot Copy: Access is Denied. Make sure the disk is not full or write protected and that the file is not currently in use" message. I can copy files from the Windows 7 computer to the XP computer.
What more do I need to do to create "Easy File Sharing" between my home networked computers?
I have 3 windows 7 computers and one windows xp machine that acts as our media server (With over 9 tb's of data). Me and my brother (Windows 7) can connect to the xp machine no problems, doesn't ask for a password or anything just does it, but I can't connect to my brothers and he can't connect to mine. So my question is, how can I share EVERYTHING with NO passwords or anything like that, I just want everything to be shared so everyone on my network can get to it
Okay I have two computers. They're both running win7 64bit home premium. The laptop seems fine and can file and printer share. So basically I'm trying to share my printer on my desktop pc connected through the usb as so I can print from my laptop.They seem to connect to each other and both are in the same homegroup. But I keep getting the can't connect to printer error. But it works if I do it the opposite way which is connect printer to laptop and network the printer through desktop. So it seems to be the settings or something on my desktop PC.The only folder I can access over the network on my desktop PC is the public folder. All the other folders say "access is denied". So there seems to be going on with my permissions,access,etc from my desktop PC. I already selected the folders I want to share and selected share with homegroup(read/write).
i have a small web server running Fedora 15 and Apache, and I have a "pictures" folder on a windows machine that I have mounted from my /etc/fstab file, with "rw" access, however when I try to use a freeware PHP script in this particular folder, it doesn't display properly (won't show subfolders).I created a new folder directly on the linux machine, and the script works fine there.
Here's the setup:D:SharedPics - windows ntfs folder, shared as \winserverpics, and this share is mounted as /var/www/html/pics with RW access (although the username/pw I supply in .smbcreds file has "full" access.) PHP script does not work here.All linux permissions show rwxr-xr-x for files and folders, and owner is "root:root"I copied all of the files/subfolders from the "pics" folder into another folder, directly located at /var/www/html/pics1. file/folder permissions are exactly the same as the pics folder. PHP script works fine here.File and share permissions on the windows machine are set for read/write/modify for "Everyone", but it seems that the samba "service" is receiving different permissions. I've checked the smb.conf file and not been able to find anything that would cause "read only" permissions.
On the road can I just click disconnect from the internet icon to be safe from intrusion or do I need to disable homegroup and file sharing etc?Upon arrival can I just reconnect by clicking the same icon and entering the password? I plan on unplugging her ISP cable from her modem and plugging it into my router. Will this work?
I'm trying to set up a file and sharing network between my PC's, 2 Win 7's and 1 Vista, and I'm having a bit of trouble. I followed all the steps in the tutorials across the web including this link, How To Share Files and Printers Between Windows 7 and Vista - How-To Geek, and the closest I could get is the Vista accessing one of the 7's. All the PC's see each other, it's just when I try to access files over the network with the 7's I get a "You don't have permission to access...contact your network administrator" error. I'm the admin on both computers and I really can't get by this. It's so frustrating, I have been doing this for like 3 days already.Just a bit of info, I do have BitDefender 2011 on both the 7's and not the Vista. Although it might not make sense, I thought this might be the issue of why the Vista can access one of the 7's, I disabled the service through msconfig -> services and startup. Also disabled the firewall on all. It still didn't fix the problem.I actually figured it out. Although I enabled sharing with "everyone" and set permissions to full control, "everyone" was not showing up under group and users in the security tab. I just added that and voila.
I am trying to install a program (Hach DataTrans), but the program insists that "Printer & file sharing are not installed". I have gone to Network and Internet/Network and Sharing Center/Advanced sharing settings and have turned on network discover and file and printer sharing for both the public profile (current profile) and the Home or Work profile. The error still pops up.
having problem with file sharing in windows 7.when i tried to share some of my folders to home network, it takes too long to finish file sharing. (right click file sharing>add user>share).
I have a Windows 7 Pro PC with Local Printer Installed & a Vista Ultimate PC that is networked to the Windows 7 local printer.All has been working fine until today when the Vista PC would not print. I deleted the networked printer in Vista & tried to re-add it but it cannot find the networked printer.I noted that the Print & File Sharing was not Enable on my Win 7 PC but when I enable it it will not remain set when I return to check the setting.I tried enabling it in Safe Mode w/Networking but it will not remain enabled.Firewall setting are all normal (no changes in settings)I don't have any infections of virus (online scan) & I use Windows Security Essentials for my AV prog.I've not installed any new apps?
I'm trying to set up shared folders on an XP computer, to be viewed on a windows 7 computer.My setup is this:Windows 7 (ZombyGeek-PC)Router --------- Windows XP (Desktop-PC)Both computer's are under the same workgroup name: ZOMBYHORDE//I can access the "Public Folders" in windows 7 from windows xp, but I cannot access the "Shared Documents" folder in windows xp from windows 7.When in windows 7, clicking "Desktop-PC" from the network window, i'm prompted for a user name and password. I've typed in the windows xp username and password AND the windows 7 user name and password, but both say "Login Failure: unknown user name or bad password."
