File And Printer Sharing?
Dec 19, 2012
In my office there are 2 desktop (Windows 7 & XP) computers and 2 laptops (Windows 7 & XP). These computers are connected to BSNL wifi router (ADSL) which has intermittent internet connection. I have also installed 2 printers on the desktop computers, one being deskjet (Windows 7) and the other laser (XP comp). On the XP system (desktop) i've enabled printer sharing.
PS: desktop computers are connected by RJ-45 and laptops by WiFi Issue :
successfully configured other PC for printer sharing. Now the issue is as i said earlier due to intermittent internet connection remaining 3 computers are unable to print laser printer when the net is down however it works fine.
What can be done..?? Also on the XP sys (desktop) i would also like to enable a particular folder to be shared.
View 3 Replies
ADVERTISEMENT
Jul 21, 2011
Okay I have two computers. They're both running win7 64bit home premium. The laptop seems fine and can file and printer share. So basically I'm trying to share my printer on my desktop pc connected through the usb as so I can print from my laptop.They seem to connect to each other and both are in the same homegroup. But I keep getting the can't connect to printer error. But it works if I do it the opposite way which is connect printer to laptop and network the printer through desktop. So it seems to be the settings or something on my desktop PC.The only folder I can access over the network on my desktop PC is the public folder. All the other folders say "access is denied". So there seems to be going on with my permissions,access,etc from my desktop PC. I already selected the folders I want to share and selected share with homegroup(read/write).
View 3 Replies
View Related
Sep 11, 2010
I am trying to install a program (Hach DataTrans), but the program insists that "Printer & file sharing are not installed". I have gone to Network and Internet/Network and Sharing Center/Advanced sharing settings and have turned on network discover and file and printer sharing for both the public profile (current profile) and the Home or Work profile. The error still pops up.
View 3 Replies
View Related
Feb 1, 2011
I have a Windows 7 Pro PC with Local Printer Installed & a Vista Ultimate PC that is networked to the Windows 7 local printer.All has been working fine until today when the Vista PC would not print. I deleted the networked printer in Vista & tried to re-add it but it cannot find the networked printer.I noted that the Print & File Sharing was not Enable on my Win 7 PC but when I enable it it will not remain set when I return to check the setting.I tried enabling it in Safe Mode w/Networking but it will not remain enabled.Firewall setting are all normal (no changes in settings)I don't have any infections of virus (online scan) & I use Windows Security Essentials for my AV prog.I've not installed any new apps?
View 9 Replies
View Related
Aug 31, 2011
I've been trying to enable File and printer Sharing but after pressing Save Changes it turn off again
View 4 Replies
View Related
Nov 9, 2009
Ok, so I have a couple of issues with my home network. I have 4 machines networked on a wireless network. Router is a Linksys WRT54G with WPA encryption using TKIP (if that makes any difference). One machine is running Win 7, one is running, Vista, and the other two are running XP Home. Both of the XP computers are using old Linksys WMP11 PCI wireless adapters. I will refer to the computers as W7MACHINE, VISTAMACHINE, XPMACHINE1, AND XPMACHINE2.
1. Ok, so my first problem is kinda simple. I'm trying to share my profile folder on W7MACHINE (C:UsersMe) over the network. I have it set to share, permissions give everybody full access, but none of the other machines can access it. They can see it, but when they try to access it they get an error telling them access is denied. Password-protected sharing is disabled, by the way. Why can't I access it?
2. The second problem is really the biggie. I have a Lexmark X5270 connected to XPMACHINE2, and I want to set up the other computers so they can print on it. XPMACHINE1 prints on it fine, no problems. Neither the Vista nor the Win 7 machine, however, can install it via the Add Printer -> Network Printer utility. Both W7MACHINE and VISTAMACHINE have the drivers installed on them, however, the company has not released drivers for Win 7 yet. When the printer is physically connected to W7MACHINE, it works fine with the Vista drivers.
Whenever I try to add the printer via the Add Printer->Network Printer utility, however, I get an error saying that Windows could not access the printer (error 0x0000000d). So, I tried the method that I found here and a few other places of telling the computer it's on a local port, creating XPMACHINE2Printer as the port, then trying to install. However, all this does is give me an interminable "installing printer..." dialog box, which I have let run for over an hour with no results. When I cancel it, I have to end the task via the Task Manager.
XPMACHINE2 also has a printer connected to it, an HP OfficeJet 4200 Series, which both the Win 7 and Vista computers can access, print on, etc. just fine. So, why can't I access the printer on the other computer? Is the printer too old? Is the computer too old?
3. My third problem isn't very important, but it's bugging me. When I go to the network map in Vista or Win 7, both XP machines are listed down at the bottom of the map because "Windows could not place the following discovered device(s) on the network map". I've heard this has to do with the Link-Layer Topology thing, but both XP computers are running SP3, which was supposed to include that fix. I've tried the method for fixing it found here, but they still don't show up.
View 9 Replies
View Related
May 11, 2009
I just installed W7 RC1 and now I cannot connect to my windows 2000 computer that has my printers. When I try to connect it comes up with "Logon failure: unknown user name or bad password" With W7 beta I was able to connect.
I noticed that when I click Use another account it has a domain listed under the username and password area and that domain shows up in the username like this DomainUsername.
View 1 Replies
View Related
Dec 31, 2009
I have a home network (Workgroup) that includes an XP-Pro Desktop (PC1), an XP-Pro laptop (PC2), an XP-Home Netbook (PC3), a MAC Leopard laptop (MAC), and Win 7-Pro Desktop (PC4). The network also includes a NAS, a TCP-IP connected printer and a MAC-attached printer.
I am using a Linksys WRT54GS router connected to a cable modem to connect the PC4, the MAC, the NAS, a Viewsonic VS10407 Wireless Access Point, and a Netgear RP614 ver4 router configured as a switch access point.
The PC1 and the TCP-IP printer are hard-wired to the switch access point, and PC2 and PC3 are connected via WIFI.
I had all of the computers save the netbook on a Workgroup and all computers could be seen from all except the MAC. I was able to print on either printer from every machine.
I then added several applications including Adobe Acrobat Standard, ScanSnap Manager, ScanSnap Organizer, MS Office Pro 2007, Thunderbird Mail, etc. and I added any number of Windows updates, Norton Internet Security updates, etc.
I also installed a Fujitsu ScanSnap S1500 Document scanner and I setup the XP-Home Netbook.
Somewhere along the way my Workgroup network went astray. I can still print on both printers from each computer but I cannot see the various computers and I get an error message:
"Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The list of servers for this workgroup is not currently available."
I have not been able to determine what went wrong and I am hoping to get some expert assistance here.
View 1 Replies
View Related
Mar 10, 2012
I bought a NETGEAR DGN2200 modem/router to connect my 2 laptops, printer, USB HDD for file storage and sharing, and at this stage I'm not sure if I will connect my desktop PC as it is a much older machine with Windows 2000 Pro which I don't want to access the internet, although I am thinking that it would be better to have the printer connected via the desktop as this is logically a more permanent setup. Hard wired ADSL will be connected in about 2 weeks.I was having a bit of a play with the router to familiarise myself with it all and I managed to set it up so that my main laptop (Windows 7) has the option to connect by hardwire or wireless, my second laptop (winXP) conects through wireless. Both laptops successfully connected
I connected the printer to my second laptop (winXP) to see if I could have access to the printer from my main laptop (Windows 7). It could see the printer but not access it and kept trying to search for the diver. As I hadn't installed the drivers onto this laptop I thought that if I download the driver and install it, then it won't look for it through windows update via the router.For this to happen, I had to disconnect from the LAN and connect to the internet via my USB modem (the two won't work simultaneously).So I connected the printer to my main laptop and allowed it to find the driver online itself.
I then connected the printer back into the second laptop (winXP) and tried to access it from my main laptop and the same thing happened, it wanted to search windows update again. After failing to find anything through the windows update, it gives the option of browsing for the .inf file on the computer, and although I spent a while trying to locate where the file was I was unsuccessful.I also am unable to share files between the two laptops, although I have turned file and print sharing on with both laptops. I have seen options to set up workgroups (winXP) and homegroups (Windows 7), but the two are not compatible.
View 2 Replies
View Related
Jun 23, 2011
When i go "Control Panel - Network and Sharing Center - Advanced Sharing Settings" and try to enable the "file and printer sharing" and click OK, it doens't save it.. If i go there again, the settings have just reverted back to disabled.. Anybody have an idea as to why this is? "Network discovery" i can enable, however "File and Printer sharing", and "Public Folder Sharing" i cannot.. Im running with pretty much standard settings, "file and printer sharing" is allowed in the firewall rules, and is enabled in the properties of my network card.. Im running on a school domain network, with my own desktop.. My laptop, which i received from my school, has no problem enabling it, but my desktop however can not..
View 2 Replies
View Related
Sep 30, 2012
I am using Windos 7 Ultimate (x64). I am using internet via LAN (DSL connection). I am really very much concerned of the security of my Notebook. I have been experiencing a problem for, approximately, 2 weeks. Now the problem is , that in "Network and Sharing Center > Advanced Sharing settings", "File and Printer sharing" options turns on automatically upon restart ( or i think it turns on also when I disconnect my Internet connection).
Now, I don't want it turned on. I am tired of turning it off again and again. There is this day I turn it off, then the next day, I just verify if it's turn on or not, and what I see is that it is enabled. How? I didn't do that? Nobody uses this Notebook except me.
View 2 Replies
View Related
May 22, 2012
The problem I believe is that on the �change sharing options for different networkprofile page (Control Panel>Network sharing) I cannot turn on the Network discovery and File saring options. click on the two enabling buttons forTurn on File DiscoveryndTurn on File & printer sharing I then find the save changes tab greyed out
View 1 Replies
View Related
Feb 24, 2010
I have a wireless home network. DLink Router. Desktop PC, Windows 7, (64 bit) . Notebook, Vista, (32 bit). Epson Stylus C66, USB connection to Desktop. Trying to set up printer sharing for the notebook. On the desktop, keep running into error code 0x000006d9. I've Googled this problem and followed possible solutions, disabling firewalls, etc., no avail.
View 12 Replies
View Related
May 10, 2012
ISSUE: Trying to print to a printer with it's drivers installed on an XP computer.I have 6 computers running (not all the time), 3 laptops and 3 desktops. I'll number them for ease of ID.1. Dell Laptop running W2K. Hardwired.2. Gateway Laptop running XP. Wireless.3. HP Laptop running W7 Ultimate. Wireless.4. Desktop ATX running XP similar to a server where I keep the big apps, printer drivers and backups, not used for web surfing. Hardwired.5. Dell 1100 desktop running XP used mostly for surfing and downloads. If I get a virus I just reformat and reload XP. Hardwired.6. Compaq desktop running XP. Hardwired.When I use Window Explorer to look at all the computers on my home LAN, I get the following.Systems: 1, 2, 5 and 6, see all 6 systems, one being itself.System: 4 with the printer drivers sees the other five, but not itself.System: 3 sees 1, 2, 3 (itself), 5 and 6. Does not see #4. On this #4 I have three printers' drivers installed.I can print from 1, 2, 4, 5 and 6 to any of the three printers. But not from #3 which is running W7. I tried adding printer and driver as per plethora of instructions on the web without success. But since it does not see system #4, the printers are not available to choose.
View 6 Replies
View Related
May 19, 2012
I've spent the last day running in circles trying to find a simple solution. I have two Win 7 machines located a few hundred miles apart. I currently have computer A (Local) connecting to computer B (remote) via UltraVNC. This works perfect except, when printing documents, I need to print to my local printer, which means on my remote machine I need to add a printer that is physically here locally. I've looked at IIS, IPP, Google Cloud drive, another service which costs. I think IPP could be the answer, but I can't find any step-by-step style of instructions out there. I have a limited understanding of this stuff, so really looking for a detailed solution.
View 1 Replies
View Related
Jun 21, 2012
Well i used to not have a problem when all the machines were XP but now when i try and add the printer its saying that i dont have the correct driver installed on the main PC when im trying to add the shared printer on my XP machine.
View 5 Replies
View Related
Jul 3, 2012
I want to share a printer with another wired computer on my home network. Sorry haven't a clue and didn't find anything with the search except broad examples. Is there a tutorial. It would be from a Windows 7 machine on a wireless router to a W8 machine wired in.
View 3 Replies
View Related
Oct 1, 2009
i cannot seem to get my Printer sharing ( Using HP PSC 1610 ALL-IN-ONE). My printer is connected through usb on windows xp 32bit and want to share printer on windows 7 x64bit windows vista x32bit.
Ive set up the sharing part on xp and windows 7 side, but i cannot seem to connect it. The problem may be that whenever i click on x64 driver to install ( I click sharing in my printer (HP PSC 1610 ALL-IN-ONE ) and click additional Drivers and tick x64 and click next it prompts me to install the driver using a cd..ive tried windows vista 32bit windows xp 32bit windows 7 x64 bit..no luck).
So i try moving the printer on windows 7. It installs the drivers x64bit one, The version is HP PSC 1600 SERIES VERSION 6.1.7600.16385 installed on 64bit as it says in Administrative Tools > Print Management > Printer servers > Comp name( Local) > Drivers and it says x64 and if i wanna add a driver it still ask me for a cd when i tick x32bit driver.
Ive tried so many methods to connect my printer over lan..Local port etc nothing works.
Can someone give me instructions on how to fix this so i can share printer over my network.
This is the part i get stuck on..when i click on x86 or x64 it ask for driver..so if my printer was ocnnected to windows 7 x64 bit i needed to install x86 so it would work on xp and Vice versa
View 2 Replies
View Related
Nov 16, 2009
Basically I'm trying to share a hp psc 1215 printer on my windows xp machine with my windows 7 machine.
The printer uses usb and is plugged in to the xp machine which is connected to a router my 7 machine connects to it witlessly and so far the 7 machine can use it and send print jobs to it. But the problem i encounter is i cant access the printer preferences and so can not change paper size or any other features from my 7 machine. Every time i go to open them from the device and printer panel the window appears and then goes again. Can anyone help me find a solution.
View 5 Replies
View Related
Nov 18, 2009
Well here is my issue I have a XP computer that is hooked up with the Printer but I have it set it for to be shared already. When I go to "ADD PRINTER" and i hit the button saying "ADD NETWORK, WIRELESS, BLUETOOTH PRINTER" it searches and searches but it nevers finds it but when I had vista I had no issues finding it. We are on the same network and workgroup.
I am connected by wireless and the XP computer is connect via wired. What can be causing this because I am completely stumped about this because I am trying to figure out how to print stuff though a network printer. Another thing is I can not find any other computer on the network tab.
View 1 Replies
View Related
Nov 30, 2009
I'm a true novice with networking.
For the first time ever, I've put in a Router, and, amazingly, it sems to work.
Have 2 PC's in the same room.
Both are ethernet hard wired to router, as they are all pretty close together.
Old PC runs XP, and has my Printer connected to it via a USB cable.
New PC runs Windows 7
Question. Assuming both PC's are turned On, would love to be able to print from my new Windows 7 PC to the printer (connected to the XP machine)
Now that there is a router, am assuming that this is possible.
Could someone please tell me how to configure the XP machine settings to enable this ?
Same question as to how to configure the new Windows 7 PC to do this ?
Detail would be appreciated, as I'm really not too sharp with this stuff.
View 3 Replies
View Related
Dec 22, 2009
I want to share my MP540 printer on a PC with Windows 7 Home x32 to use it on my other PC with a Windows 7 Pro x64.
The printer seems shared fine on Home x32 but I couldn't able to install it (nothing found when Pro x64 PC try to browse a shared printer on the network).
My network setup has nothing special. A simple router and it's done. Earlier (when both machine has XP x32, there weren't any problem (just clicked on the printer to share, and voila, the other PC found it, no need to change/click/setup etc. anything...
I found an option window on x32 to install some drivers (?) (where you can tick a "x64 ....blabla") but it needs some install disk (maybe .nfo files?) for the printer.
I have move the printer to my x64 PC, plug in it, and install went fine. So, both machine probably has the appropriate drivers...
But now I'm stuck.
View 7 Replies
View Related
Apr 30, 2009
I just reformatted my desktop with 7 and I wanted to share the attached HP PSC2355 wirelessly to my Vista lappy. I had this connected and functioning previously when the desktop was running XP but now I cant seem to get my lappy to connect to the 'home-group' to find the printer. I found some other posts of sharing a printer on a vista machine over to 7 but not from 7 over to vista. Any help would be greatly appreciated.
View 3 Replies
View Related
Sep 30, 2009
My printer is attached via USB. I can get my printer installed in both Windows 7 and XP mode. In XP mode it shows as shared in USB devices. However, it is online in Windows 7 and can be used, but offline in XP mode. If I click Attach it will work in XP mode, but then shows as offline in Windows 7 and can't be used. Integration features the Printers box is check, as well as enable at startup.
Is it possible to use the printer on both machines without havind to attach and unattach it?
View 2 Replies
View Related
Sep 15, 2011
I just bought a Dell Inspiron 4010, 64 bit with Windows 7 Ultimate as the OS. The HP 3015 Laserjet is connected via a XP machine (old one). I have downloaded the drivers from the HP site. The printer shows on the network but am not able to print from the machine. Am at my wits end trying to figure out how to work this one out.
View 7 Replies
View Related
Nov 28, 2009
I have an HP Laserjet 2300 Series PCL6 printer connected directly to a Windows XP machine. On the same network, I have a new machine running Windows 7. I want to share the printer over the network.
Question: Am I wasting my time trying to get this to work?
FYI, Windows 7 sees the shared printer but when it attempts to connect in the "Add a Printer" dialog, it gives me a "No driver found" alert. I downloaded the (hopefully) appropriate Windows 7 printer driver (*) from the HP site and installed it on my Windows 7 machine, but when I try to connect, I still get "No driver found."
(*) HP Universal Print Driver for Windows PCL5 x64
View 4 Replies
View Related
Aug 29, 2009
Having troubles setting this up.
Windows 7 computer working fine - printer working fine (it's a canon ip5200). On Windows XP machine (SP3), I am trying to access the printer. I've tried this a couple of ways and it fails every time.
1) Drill down to printer via the Add Printer searchj for a network printer action. This eventually will ask me to point to an INF file that I don't have (unpacking Canon's printer driver installer to get to the 'ip5200.inf' file will eventually get me a 'Invalid printer file' error even though I can see that the inf file looks like an inf file.
2) Try to add it as a local printer, pointing to the network path (etworkprinter). That installs OK, but it doesn't work.
3) Try to install a network printer giving it a network path. See #1.
What in the heck am I doing wrong? I cannot get Windows7 to add the Windows XP drivers to it's list so I can install it via the network.
View 1 Replies
View Related
Apr 14, 2011
Is it required to be in the same Home network to be able to share a printer?Or can both computers be in a public network only?
View 1 Replies
View Related
Jul 21, 2009
Does anyone have any idea how to get a Mac Powerbook (10.4.11) to connected to a Printer (HP Officejet 4215) that is connected to a PC (Windows 7100) through a Linksys Router (WRT54GS)?
I've got printer sharing enabled on the PC and have tried so many things that I'd rather not post everything here.
If there is anybody that knows of a surefire way to get this working, I would appreciate it .
View 9 Replies
View Related
Oct 6, 2011
I have two new win 7 computers, one new network HD and 2 usb printers. What is the easiest way to setup a home network so any and all computers can see and use all HD's and printers on a new Win 7 network?
View 1 Replies
View Related
Dec 21, 2011
I have a small network connected via a router.I have 2 printers connected to a computer running on windows 7.i want to share it with a computer running XP on the network.Can this be done??PS:-i am not that educated in networking so you will have to break it down for me.
View 2 Replies
View Related
