Unable To Enable "File And Printer Sharing" On Windows 7?
Jun 23, 2011
When i go "Control Panel - Network and Sharing Center - Advanced Sharing Settings" and try to enable the "file and printer sharing" and click OK, it doens't save it.. If i go there again, the settings have just reverted back to disabled.. Anybody have an idea as to why this is? "Network discovery" i can enable, however "File and Printer sharing", and "Public Folder Sharing" i cannot.. Im running with pretty much standard settings, "file and printer sharing" is allowed in the firewall rules, and is enabled in the properties of my network card.. Im running on a school domain network, with my own desktop.. My laptop, which i received from my school, has no problem enabling it, but my desktop however can not..
View 2 Replies
ADVERTISEMENT
Feb 1, 2011
I have a Windows 7 Pro PC with Local Printer Installed & a Vista Ultimate PC that is networked to the Windows 7 local printer.All has been working fine until today when the Vista PC would not print. I deleted the networked printer in Vista & tried to re-add it but it cannot find the networked printer.I noted that the Print & File Sharing was not Enable on my Win 7 PC but when I enable it it will not remain set when I return to check the setting.I tried enabling it in Safe Mode w/Networking but it will not remain enabled.Firewall setting are all normal (no changes in settings)I don't have any infections of virus (online scan) & I use Windows Security Essentials for my AV prog.I've not installed any new apps?
View 9 Replies
View Related
Jul 21, 2011
Okay I have two computers. They're both running win7 64bit home premium. The laptop seems fine and can file and printer share. So basically I'm trying to share my printer on my desktop pc connected through the usb as so I can print from my laptop.They seem to connect to each other and both are in the same homegroup. But I keep getting the can't connect to printer error. But it works if I do it the opposite way which is connect printer to laptop and network the printer through desktop. So it seems to be the settings or something on my desktop PC.The only folder I can access over the network on my desktop PC is the public folder. All the other folders say "access is denied". So there seems to be going on with my permissions,access,etc from my desktop PC. I already selected the folders I want to share and selected share with homegroup(read/write).
View 3 Replies
View Related
Mar 10, 2012
I bought a NETGEAR DGN2200 modem/router to connect my 2 laptops, printer, USB HDD for file storage and sharing, and at this stage I'm not sure if I will connect my desktop PC as it is a much older machine with Windows 2000 Pro which I don't want to access the internet, although I am thinking that it would be better to have the printer connected via the desktop as this is logically a more permanent setup. Hard wired ADSL will be connected in about 2 weeks.I was having a bit of a play with the router to familiarise myself with it all and I managed to set it up so that my main laptop (Windows 7) has the option to connect by hardwire or wireless, my second laptop (winXP) conects through wireless. Both laptops successfully connected
I connected the printer to my second laptop (winXP) to see if I could have access to the printer from my main laptop (Windows 7). It could see the printer but not access it and kept trying to search for the diver. As I hadn't installed the drivers onto this laptop I thought that if I download the driver and install it, then it won't look for it through windows update via the router.For this to happen, I had to disconnect from the LAN and connect to the internet via my USB modem (the two won't work simultaneously).So I connected the printer to my main laptop and allowed it to find the driver online itself.
I then connected the printer back into the second laptop (winXP) and tried to access it from my main laptop and the same thing happened, it wanted to search windows update again. After failing to find anything through the windows update, it gives the option of browsing for the .inf file on the computer, and although I spent a while trying to locate where the file was I was unsuccessful.I also am unable to share files between the two laptops, although I have turned file and print sharing on with both laptops. I have seen options to set up workgroups (winXP) and homegroups (Windows 7), but the two are not compatible.
View 2 Replies
View Related
Dec 19, 2012
In my office there are 2 desktop (Windows 7 & XP) computers and 2 laptops (Windows 7 & XP). These computers are connected to BSNL wifi router (ADSL) which has intermittent internet connection. I have also installed 2 printers on the desktop computers, one being deskjet (Windows 7) and the other laser (XP comp). On the XP system (desktop) i've enabled printer sharing.
PS: desktop computers are connected by RJ-45 and laptops by WiFi Issue :
successfully configured other PC for printer sharing. Now the issue is as i said earlier due to intermittent internet connection remaining 3 computers are unable to print laser printer when the net is down however it works fine.
What can be done..?? Also on the XP sys (desktop) i would also like to enable a particular folder to be shared.
View 3 Replies
View Related
Sep 11, 2010
I am trying to install a program (Hach DataTrans), but the program insists that "Printer & file sharing are not installed". I have gone to Network and Internet/Network and Sharing Center/Advanced sharing settings and have turned on network discover and file and printer sharing for both the public profile (current profile) and the Home or Work profile. The error still pops up.
View 3 Replies
View Related
Aug 31, 2011
I've been trying to enable File and printer Sharing but after pressing Save Changes it turn off again
View 4 Replies
View Related
Nov 9, 2009
Ok, so I have a couple of issues with my home network. I have 4 machines networked on a wireless network. Router is a Linksys WRT54G with WPA encryption using TKIP (if that makes any difference). One machine is running Win 7, one is running, Vista, and the other two are running XP Home. Both of the XP computers are using old Linksys WMP11 PCI wireless adapters. I will refer to the computers as W7MACHINE, VISTAMACHINE, XPMACHINE1, AND XPMACHINE2.
1. Ok, so my first problem is kinda simple. I'm trying to share my profile folder on W7MACHINE (C:UsersMe) over the network. I have it set to share, permissions give everybody full access, but none of the other machines can access it. They can see it, but when they try to access it they get an error telling them access is denied. Password-protected sharing is disabled, by the way. Why can't I access it?
2. The second problem is really the biggie. I have a Lexmark X5270 connected to XPMACHINE2, and I want to set up the other computers so they can print on it. XPMACHINE1 prints on it fine, no problems. Neither the Vista nor the Win 7 machine, however, can install it via the Add Printer -> Network Printer utility. Both W7MACHINE and VISTAMACHINE have the drivers installed on them, however, the company has not released drivers for Win 7 yet. When the printer is physically connected to W7MACHINE, it works fine with the Vista drivers.
Whenever I try to add the printer via the Add Printer->Network Printer utility, however, I get an error saying that Windows could not access the printer (error 0x0000000d). So, I tried the method that I found here and a few other places of telling the computer it's on a local port, creating XPMACHINE2Printer as the port, then trying to install. However, all this does is give me an interminable "installing printer..." dialog box, which I have let run for over an hour with no results. When I cancel it, I have to end the task via the Task Manager.
XPMACHINE2 also has a printer connected to it, an HP OfficeJet 4200 Series, which both the Win 7 and Vista computers can access, print on, etc. just fine. So, why can't I access the printer on the other computer? Is the printer too old? Is the computer too old?
3. My third problem isn't very important, but it's bugging me. When I go to the network map in Vista or Win 7, both XP machines are listed down at the bottom of the map because "Windows could not place the following discovered device(s) on the network map". I've heard this has to do with the Link-Layer Topology thing, but both XP computers are running SP3, which was supposed to include that fix. I've tried the method for fixing it found here, but they still don't show up.
View 9 Replies
View Related
May 11, 2009
I just installed W7 RC1 and now I cannot connect to my windows 2000 computer that has my printers. When I try to connect it comes up with "Logon failure: unknown user name or bad password" With W7 beta I was able to connect.
I noticed that when I click Use another account it has a domain listed under the username and password area and that domain shows up in the username like this DomainUsername.
View 1 Replies
View Related
Dec 31, 2009
I have a home network (Workgroup) that includes an XP-Pro Desktop (PC1), an XP-Pro laptop (PC2), an XP-Home Netbook (PC3), a MAC Leopard laptop (MAC), and Win 7-Pro Desktop (PC4). The network also includes a NAS, a TCP-IP connected printer and a MAC-attached printer.
I am using a Linksys WRT54GS router connected to a cable modem to connect the PC4, the MAC, the NAS, a Viewsonic VS10407 Wireless Access Point, and a Netgear RP614 ver4 router configured as a switch access point.
The PC1 and the TCP-IP printer are hard-wired to the switch access point, and PC2 and PC3 are connected via WIFI.
I had all of the computers save the netbook on a Workgroup and all computers could be seen from all except the MAC. I was able to print on either printer from every machine.
I then added several applications including Adobe Acrobat Standard, ScanSnap Manager, ScanSnap Organizer, MS Office Pro 2007, Thunderbird Mail, etc. and I added any number of Windows updates, Norton Internet Security updates, etc.
I also installed a Fujitsu ScanSnap S1500 Document scanner and I setup the XP-Home Netbook.
Somewhere along the way my Workgroup network went astray. I can still print on both printers from each computer but I cannot see the various computers and I get an error message:
"Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The list of servers for this workgroup is not currently available."
I have not been able to determine what went wrong and I am hoping to get some expert assistance here.
View 1 Replies
View Related
Sep 30, 2012
I am using Windos 7 Ultimate (x64). I am using internet via LAN (DSL connection). I am really very much concerned of the security of my Notebook. I have been experiencing a problem for, approximately, 2 weeks. Now the problem is , that in "Network and Sharing Center > Advanced Sharing settings", "File and Printer sharing" options turns on automatically upon restart ( or i think it turns on also when I disconnect my Internet connection).
Now, I don't want it turned on. I am tired of turning it off again and again. There is this day I turn it off, then the next day, I just verify if it's turn on or not, and what I see is that it is enabled. How? I didn't do that? Nobody uses this Notebook except me.
View 2 Replies
View Related
May 10, 2012
ISSUE: Trying to print to a printer with it's drivers installed on an XP computer.I have 6 computers running (not all the time), 3 laptops and 3 desktops. I'll number them for ease of ID.1. Dell Laptop running W2K. Hardwired.2. Gateway Laptop running XP. Wireless.3. HP Laptop running W7 Ultimate. Wireless.4. Desktop ATX running XP similar to a server where I keep the big apps, printer drivers and backups, not used for web surfing. Hardwired.5. Dell 1100 desktop running XP used mostly for surfing and downloads. If I get a virus I just reformat and reload XP. Hardwired.6. Compaq desktop running XP. Hardwired.When I use Window Explorer to look at all the computers on my home LAN, I get the following.Systems: 1, 2, 5 and 6, see all 6 systems, one being itself.System: 4 with the printer drivers sees the other five, but not itself.System: 3 sees 1, 2, 3 (itself), 5 and 6. Does not see #4. On this #4 I have three printers' drivers installed.I can print from 1, 2, 4, 5 and 6 to any of the three printers. But not from #3 which is running W7. I tried adding printer and driver as per plethora of instructions on the web without success. But since it does not see system #4, the printers are not available to choose.
View 6 Replies
View Related
Jun 21, 2012
Well i used to not have a problem when all the machines were XP but now when i try and add the printer its saying that i dont have the correct driver installed on the main PC when im trying to add the shared printer on my XP machine.
View 5 Replies
View Related
Sep 15, 2011
I just bought a Dell Inspiron 4010, 64 bit with Windows 7 Ultimate as the OS. The HP 3015 Laserjet is connected via a XP machine (old one). I have downloaded the drivers from the HP site. The printer shows on the network but am not able to print from the machine. Am at my wits end trying to figure out how to work this one out.
View 7 Replies
View Related
Oct 28, 2009
Soon I will install Windows 7, I like to share my printer.
The printer should be used by a Windows XP computer.
I read some treads in this forum about how to share the printer, but I was wondering if sharing everything without a password is a good practice?
View 8 Replies
View Related
May 11, 2009
I downloaded Windows 7 RC 64 Bit Build:7100.0.090421-1700 x64.
After I installed it, I only had to install my wireless network drivers and Windows 7 downloaded the rest of all of my system. I did not have to install any driver at all.
My problem is when I try to print from my Vista 32 laptop nothing prints to my printer. Under active documents listed for my printer it just says under status | Error - Printing.
Under the ports tab on my Vista 32 laptop, the check is in the box [Windows 7 64][printer] | Local Port
Under the ports tab on my Window 7 64 Desktop, the check is in the box USB001 | Virtual printer port for USB
The 64 bit drivers for my printer are on the Windows 7 64 Desktop and the 32 bit drivers are on the Vista 32 laptop.
I do not know why I cannot share printing.
On Windows 7 64, share this printer is checked and Render print jobs on client computers is checked.
I know this seems to be a much talked about problem but I tried the best I could to follow the posted suggestions.
My Desktop has a Canon iP4600 printer.
My desktop's computer name is AGP-001 and the printer share name is CanoniP4.
View 9 Replies
View Related
Nov 24, 2012
how to sharing hp1320 printer for xp2 windows 7
View 1 Replies
View Related
May 22, 2012
The problem I believe is that on the �change sharing options for different networkprofile page (Control Panel>Network sharing) I cannot turn on the Network discovery and File saring options. click on the two enabling buttons forTurn on File DiscoveryndTurn on File & printer sharing I then find the save changes tab greyed out
View 1 Replies
View Related
Dec 15, 2011
I want to connect a printer which is attached with another PC using Win XP32bit.Printer: HP P2015Ive downloaded Win7 64bit PCL5 /PCl6 universal driver fro
View 1 Replies
View Related
Jul 16, 2012
i have a windows 7 64 bit machine sharing a printer. the xp laptop tries to connect but gets a request for id and pw to connect to the win 7 machine.
View 2 Replies
View Related
Jan 22, 2011
I got 2 PCs (A & B) both running Windows 7 ultimate networked through an ADSL2+router. On PC A, I have a folder X. On PC B, I got two user accounts: 1 and 2. I wanted to share folder X on PC A with PC B user 1 but not user 2. How do I implement it?
View 3 Replies
View Related
Dec 18, 2011
I am trying to share files between and old home PC running XP, to a new PC running Windows 7. Both PC's are connected directly to a router via LAN cables. I am looking to transfer all the old files and documents to the new Windows 7 PC.The Windows 7 PC currently shares files with other laptops (running Windows 7). I believe that I have setup up both PC for file sharing, but I am unable to see the other PC on either machine.On the PC with XP, I can see under 'M Network Places', the folder and file structure that would like to share.
View 7 Replies
View Related
Jan 31, 2012
I've read the OLD posts on this problem, and tried the 'fix' described. Doesn't work. I've reset the permissions, I've done everything I can think of, and this blasted OS will NOT allow me to change from the LOCKED/Nobody setting.
View 9 Replies
View Related
Feb 19, 2011
I have 3 windows 7 computers and one windows xp machine that acts as our media server (With over 9 tb's of data). Me and my brother (Windows 7) can connect to the xp machine no problems, doesn't ask for a password or anything just does it, but I can't connect to my brothers and he can't connect to mine. So my question is, how can I share EVERYTHING with NO passwords or anything like that, I just want everything to be shared so everyone on my network can get to it
View 3 Replies
View Related
Jun 12, 2011
I am running Windows 7 Ultimate and sharing a printer to other laptops running in the household using Vista and XP. I installed sp1 last weekend and then laptops stopped being able to print. Spent 3 hours on it yesterday and finally rolled back and things are now working again.I did notice that after sp1 my home group had been changed back to the "MSHOME" default. After changing it back to the exiting name, I could see the network printer and also edit files on any of the machines I had set access for. I also could set the print on the Vista release and my desktop with 7 would work just fine so no network issues. When I moved the printer back to 7, the Vista laptop would get an error while trying to load the drivers.
View 1 Replies
View Related
Oct 16, 2012
I have 3 systems each running Windows 7 Ultimate on a home network (not a home group). I have an HP Laserjet 1022 attached via USB to system #3 (32 bit). System #1 is 64 bit and #2 is 32 bit. System #2 prints fine on system #3. When system #1 (64 bit) prints, the entry is made into the print queue of #3, but never prints. I've tried restarting the print spooler to no avail. Print entry from #1 cannot be cancelled. I have to manually delete the spooler entry for the print job from C:/Windows/system32/spool/PRINTERS.Without getting into finger pointing at HP, is there a problem with the printing software in Windows 7 when OS word sizes are mixed ? Is the HP Laserjet 1022 driver too old to be used (the driver states it was modified this current year)?
View 3 Replies
View Related
Jul 21, 2011
I built it mainly for my 14yo to do school work and video games on rather to replace our aging desktop which is still used also. The old machine runs 32-bit Vista while the new one is 64-bit Win7, of course. In our reorganization we moved our Canon MP610 printer to be hooked up to the new machine, but it'd be great if we could share it amongst both pc's and my older son's new laptop. I've search and read lots of sites online, but can't really find a solution to get the old pc to be able to "see" the printer to share.
View 3 Replies
View Related
Mar 13, 2010
Have a Canon ip6000d printer hooked up to a Win7 32bit machine. I installed the "printer add-on module" for Win7 on this machine and it prints fine. I share it across the network so that I can print from my Win7 64bit laptop but I can not install the driver for it. The laptop sees the printer when I try to "add a printer" but it looks for a 64bit driver. So I installed the "printer add-on module" onto the laptop, and still nothing, it continues to look for a driver. So I then directly connected the printer (usb) to the laptop, it installed itself and works perfectly fine. So I reconnected it back to the 32bit machine and tried to "add a printer" again over the network and it still asks for the 64driver. I can't find a regular .inf driver file anywhere for this printer, just the damn "printer add-on module".
View 3 Replies
View Related
Jan 6, 2012
i have a small web server running Fedora 15 and Apache, and I have a "pictures" folder on a windows machine that I have mounted from my /etc/fstab file, with "rw" access, however when I try to use a freeware PHP script in this particular folder, it doesn't display properly (won't show subfolders).I created a new folder directly on the linux machine, and the script works fine there.
Here's the setup:D:SharedPics - windows ntfs folder, shared as \winserverpics, and this share is mounted as /var/www/html/pics with RW access (although the username/pw I supply in .smbcreds file has "full" access.) PHP script does not work here.All linux permissions show rwxr-xr-x for files and folders, and owner is "root:root"I copied all of the files/subfolders from the "pics" folder into another folder, directly located at /var/www/html/pics1. file/folder permissions are exactly the same as the pics folder. PHP script works fine here.File and share permissions on the windows machine are set for read/write/modify for "Everyone", but it seems that the samba "service" is receiving different permissions. I've checked the smb.conf file and not been able to find anything that would cause "read only" permissions.
View 1 Replies
View Related
Nov 6, 2011
I'm trying to set up shared folders on an XP computer, to be viewed on a windows 7 computer.My setup is this:Windows 7 (ZombyGeek-PC)Router --------- Windows XP (Desktop-PC)Both computer's are under the same workgroup name: ZOMBYHORDE//I can access the "Public Folders" in windows 7 from windows xp, but I cannot access the "Shared Documents" folder in windows xp from windows 7.When in windows 7, clicking "Desktop-PC" from the network window, i'm prompted for a user name and password. I've typed in the windows xp username and password AND the windows 7 user name and password, but both say "Login Failure: unknown user name or bad password."
View 9 Replies
View Related
Apr 14, 2010
I am the admin on all machines. I am using XP, Vista and Win 7 on my home network and have set up a workgroup network, it all works and I can see each machine on my separate Machines ..But I have a problem with sharing files. Every time I go to get a file from any machine a User account dialog box pops up requests a user name and pass word??? How can I remove this problem from all machines? do I need to setup account on all machines allowing access to each other or is there a simpler way? If I need to set up unrestricted accounts how do I do it? I can get some files from one machines then it may request a Username & password?
View 6 Replies
View Related
