I downloaded Windows 7 RC 64 Bit Build:7100.0.090421-1700 x64.
After I installed it, I only had to install my wireless network drivers and Windows 7 downloaded the rest of all of my system. I did not have to install any driver at all.
My problem is when I try to print from my Vista 32 laptop nothing prints to my printer. Under active documents listed for my printer it just says under status | Error - Printing.
Under the ports tab on my Vista 32 laptop, the check is in the box [Windows 7 64][printer] | Local Port
Under the ports tab on my Window 7 64 Desktop, the check is in the box USB001 | Virtual printer port for USB
The 64 bit drivers for my printer are on the Windows 7 64 Desktop and the 32 bit drivers are on the Vista 32 laptop.
I do not know why I cannot share printing.
On Windows 7 64, share this printer is checked and Render print jobs on client computers is checked.
I know this seems to be a much talked about problem but I tried the best I could to follow the posted suggestions.
My Desktop has a Canon iP4600 printer.
My desktop's computer name is AGP-001 and the printer share name is CanoniP4.
I am running Windows 7 Ultimate and sharing a printer to other laptops running in the household using Vista and XP. I installed sp1 last weekend and then laptops stopped being able to print. Spent 3 hours on it yesterday and finally rolled back and things are now working again.I did notice that after sp1 my home group had been changed back to the "MSHOME" default. After changing it back to the exiting name, I could see the network printer and also edit files on any of the machines I had set access for. I also could set the print on the Vista release and my desktop with 7 would work just fine so no network issues. When I moved the printer back to 7, the Vista laptop would get an error while trying to load the drivers.
I built it mainly for my 14yo to do school work and video games on rather to replace our aging desktop which is still used also. The old machine runs 32-bit Vista while the new one is 64-bit Win7, of course. In our reorganization we moved our Canon MP610 printer to be hooked up to the new machine, but it'd be great if we could share it amongst both pc's and my older son's new laptop. I've search and read lots of sites online, but can't really find a solution to get the old pc to be able to "see" the printer to share.
Is it possible to set up a shared printer with one laptop running Windows 7 and the other laptop running Vista? I have tried setting all the required sharing settings on both units, but without success!
I just reformatted my desktop with 7 and I wanted to share the attached HP PSC2355 wirelessly to my Vista lappy. I had this connected and functioning previously when the desktop was running XP but now I cant seem to get my lappy to connect to the 'home-group' to find the printer. I found some other posts of sharing a printer on a vista machine over to 7 but not from 7 over to vista. Any help would be greatly appreciated.
I have tried to share Brotherhood MFC-7420 on my Windows 7 computer with a Vista machine (both 64bit, Home Premiums). If I try to add new printer through "add printer" option, I get this error message:"The server for the 'Brother MFC-7420 USB Printer' printer does not have the correct printer driver installed. If you want to search for the proper driver, clock OK. Otherwise, click Cancel and contact your network administrator or original equipment manufacturer for the correct printer driver."I dug around in Google for awhile, and some people used the trick where they installed the printer locally and changed the port name to \ComputerNamePrinter. When I do it, it gives me an error message: "Access Denied."I updated the driver.Network discovery is on.Printer Sharing is on.Password-Protected Sharing is off.The Windows 7 machine is in a Homegroup with 2 other Windows 7 computers.I tried lowering my Windows Firewall during connection.
My music and movies are on my desktop (Vista64) in my bedroom. I bought a netbook to use in the family room (Windows 7) to stream and share. The homegroup workgroup won't work for me.So when I'm looking on the Windows 7 machine and many of the music files are missing. The band name is te. Under that the album name is there. But the tracks are not. Just empty folders.here's where it gets even worse. Only some of these folders appear empty. Not all. They exist on the desktop but only maybe 10% have music in them when the folders are explored on the netbook.
I am the admin on all machines. I am using XP, Vista and Win 7 on my home network and have set up a workgroup network, it all works and I can see each machine on my separate Machines ..But I have a problem with sharing files. Every time I go to get a file from any machine a User account dialog box pops up requests a user name and pass word??? How can I remove this problem from all machines? do I need to setup account on all machines allowing access to each other or is there a simpler way? If I need to set up unrestricted accounts how do I do it? I can get some files from one machines then it may request a Username & password?
I just bought a new laptop and decided to get windows 7 on it.
So far everything is great, i love how it looks and all works fine. Seting up wlan and all was no problem.
THE problem is... well with both old pcs (one pc one laptop) we had home network (or whatever network) set up so i could copy the files from sisters pc to my lappy and the other way around.
So now i have windows 7 on the new laptop.
And Vista on my old laptop (Vista 32 bit SP1)
And 0 idea what or where and how to do so i can share the files and get em from my old laptop on the new one... Flash is all fine and dandy but 100+Gb is a bit too much to be transfering with a 2Gb flash card <_< (old lappy does not have Bluetooth either btw...)
Are there any tutorials perhaps on how to get this done or at least ideas?
I'm attempting to share a folder from my desktop, running Windows Vista HP, to my laptop, running Windows 7 HP. I've been able to set up the sharing without any difficulty, but I'm trying to edit permissions so that this folder is only available to my laptop and not any other computer on the network. When I try to add a new set of permissions on PC, I can't search any location other than the name of my PC.
have a new HP lap top running Win 7 64 bit, A new Lenovo Think Centre running Win 7 32 Bit, connected wirelessly to my router. Have set up a Homegroup between these two computers and they work OK, My problem, my older PC running Win Vista 64 bit is connected to the same Netcom NB6 plus 4w adsl2 router via a wired connection, this PC has files I would like to share with the new windows 7 computers. I have tried to follow the set up proceedures although they do not seem to work the way the Computers are connected to the router
ISSUE: Trying to print to a printer with it's drivers installed on an XP computer.I have 6 computers running (not all the time), 3 laptops and 3 desktops. I'll number them for ease of ID.1. Dell Laptop running W2K. Hardwired.2. Gateway Laptop running XP. Wireless.3. HP Laptop running W7 Ultimate. Wireless.4. Desktop ATX running XP similar to a server where I keep the big apps, printer drivers and backups, not used for web surfing. Hardwired.5. Dell 1100 desktop running XP used mostly for surfing and downloads. If I get a virus I just reformat and reload XP. Hardwired.6. Compaq desktop running XP. Hardwired.When I use Window Explorer to look at all the computers on my home LAN, I get the following.Systems: 1, 2, 5 and 6, see all 6 systems, one being itself.System: 4 with the printer drivers sees the other five, but not itself.System: 3 sees 1, 2, 3 (itself), 5 and 6. Does not see #4. On this #4 I have three printers' drivers installed.I can print from 1, 2, 4, 5 and 6 to any of the three printers. But not from #3 which is running W7. I tried adding printer and driver as per plethora of instructions on the web without success. But since it does not see system #4, the printers are not available to choose.
Well i used to not have a problem when all the machines were XP but now when i try and add the printer its saying that i dont have the correct driver installed on the main PC when im trying to add the shared printer on my XP machine.
I just bought a Dell Inspiron 4010, 64 bit with Windows 7 Ultimate as the OS. The HP 3015 Laserjet is connected via a XP machine (old one). I have downloaded the drivers from the HP site. The printer shows on the network but am not able to print from the machine. Am at my wits end trying to figure out how to work this one out.
Okay I have two computers. They're both running win7 64bit home premium. The laptop seems fine and can file and printer share. So basically I'm trying to share my printer on my desktop pc connected through the usb as so I can print from my laptop.They seem to connect to each other and both are in the same homegroup. But I keep getting the can't connect to printer error. But it works if I do it the opposite way which is connect printer to laptop and network the printer through desktop. So it seems to be the settings or something on my desktop PC.The only folder I can access over the network on my desktop PC is the public folder. All the other folders say "access is denied". So there seems to be going on with my permissions,access,etc from my desktop PC. I already selected the folders I want to share and selected share with homegroup(read/write).
Home networks are more and more popular these days and making your home computers work together can be a challenge. While having only computers with Windows 7 installed can make your home networking life extremely easy, I'm sure many have older computers with older operating systems installed. In this article, I will continue our networking series and show how to share files and folders between Windows Vista and Windows 7 based computers. As you'll see, it's not that hard to make them work together.
I know this question has been asked several times, and I've done a lot of research into it already, but I still can't seem to change my folder (in this case D:Movies) to be shared an accessed by my Vista x64 primary computer.
When I go into my Network and access the computer, it lets me view the shared folders that I've set sharing on, but when I actually double click the folder to open it I get this error message:
Windows cannot access XXXXX-DownloadsMovies
Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose. The error code is 0x80070005.
When I diagnose it tells me that the folder is available but my user account doesn't have access. However, I've already disabled password protected sharing, and I've accessed the Public section of my sharing settings and enabled everything that I read in previous posts, all to no avail.
I also read up on selecting the folder, then clicking the Share With.. tab and selecting "Everyone Read/Write", every time I try doing this as soon as I select the Share With.. tab again it's defaulted back to Nobody.
Here's the part I'm not sure could be causing all of this:
This folder, Movies, was originally on my Main Desktop PC (the Windows 7 machine is my new downloads machine) I bought a new 1.5TB sata2 hdd and set it up on my x64 vista (main) and transferred my movies folder on to it, then I uninstalled the hard drive and reinstalled it on my windows 7 x64 (downloads/secondary pc)
So the folder was originally on another computer, but was swapped via my new 1.5 TB hard drive, I'm not sure if this is related as I'm not a guru when it comes to any OS.
Regardless, I really need to get this folder on my Windows 7 machine accessible on my Windows Vista primary as soon as possible. If you need anymore information regarding either of my computers please let me know and I'll gather it as fast as I can,
I want to connect a printer which is attached with another PC using Win XP32bit.Printer: HP P2015Ive downloaded Win7 64bit PCL5 /PCl6 universal driver fro
I have a Belkin wireless 'N' Router which is connected through a cable connection to my desktop with Vista OS. There is also a wireless enabled HP 110 Mini Netbook with Windows 7 Starter Edition OS on which connects to the Belkin router. For some reason when I click on 'Network' and right click and hit explore from the Vista computer to look at the Netbooks files it will not let me... both File Sharing and Pulblic File Sharing are turned on.
The networks are both configured to "Home Networks". Also I am unsure how to get my printer (A non-wireless enabled HP Photosmart C4200 which is wired to my Vista computer) onto the network for use on the Netbook. This concerns me as it says all USB printers should so up in the network by default. Does anyone have any suggestions or help?
I have 3 systems each running Windows 7 Ultimate on a home network (not a home group). I have an HP Laserjet 1022 attached via USB to system #3 (32 bit). System #1 is 64 bit and #2 is 32 bit. System #2 prints fine on system #3. When system #1 (64 bit) prints, the entry is made into the print queue of #3, but never prints. I've tried restarting the print spooler to no avail. Print entry from #1 cannot be cancelled. I have to manually delete the spooler entry for the print job from C:/Windows/system32/spool/PRINTERS.Without getting into finger pointing at HP, is there a problem with the printing software in Windows 7 when OS word sizes are mixed ? Is the HP Laserjet 1022 driver too old to be used (the driver states it was modified this current year)?
Have a Canon ip6000d printer hooked up to a Win7 32bit machine. I installed the "printer add-on module" for Win7 on this machine and it prints fine. I share it across the network so that I can print from my Win7 64bit laptop but I can not install the driver for it. The laptop sees the printer when I try to "add a printer" but it looks for a 64bit driver. So I installed the "printer add-on module" onto the laptop, and still nothing, it continues to look for a driver. So I then directly connected the printer (usb) to the laptop, it installed itself and works perfectly fine. So I reconnected it back to the 32bit machine and tried to "add a printer" again over the network and it still asks for the 64driver. I can't find a regular .inf driver file anywhere for this printer, just the damn "printer add-on module".
I have just upgraded the 8 pcs in my office from XP Pro to Windows 7 Pro 32bit and I've encountered printer sharing issues. I have a local mono laser connected to my PC by USB. I've shared this and others have been able to add the printer and on occasion print to it, it usually works when they want to print text to A4 but when they want to do labels or envelopes they usually sit in the queue and don't print. This is not an issue we had on XP and the document templates haven't changed. I don't think it is an issue with the printer (I've replaced it with a new one to make sure), I don't think it is an issue with the documents. I think it is an issue with Windows 7 and was wondering if there is a known issue or fix. The computers are connected over a domain not workgroup.
I bought a NETGEAR DGN2200 modem/router to connect my 2 laptops, printer, USB HDD for file storage and sharing, and at this stage I'm not sure if I will connect my desktop PC as it is a much older machine with Windows 2000 Pro which I don't want to access the internet, although I am thinking that it would be better to have the printer connected via the desktop as this is logically a more permanent setup. Hard wired ADSL will be connected in about 2 weeks.I was having a bit of a play with the router to familiarise myself with it all and I managed to set it up so that my main laptop (Windows 7) has the option to connect by hardwire or wireless, my second laptop (winXP) conects through wireless. Both laptops successfully connected
I connected the printer to my second laptop (winXP) to see if I could have access to the printer from my main laptop (Windows 7). It could see the printer but not access it and kept trying to search for the diver. As I hadn't installed the drivers onto this laptop I thought that if I download the driver and install it, then it won't look for it through windows update via the router.For this to happen, I had to disconnect from the LAN and connect to the internet via my USB modem (the two won't work simultaneously).So I connected the printer to my main laptop and allowed it to find the driver online itself.
I then connected the printer back into the second laptop (winXP) and tried to access it from my main laptop and the same thing happened, it wanted to search windows update again. After failing to find anything through the windows update, it gives the option of browsing for the .inf file on the computer, and although I spent a while trying to locate where the file was I was unsuccessful.I also am unable to share files between the two laptops, although I have turned file and print sharing on with both laptops. I have seen options to set up workgroups (winXP) and homegroups (Windows 7), but the two are not compatible.
I have a wireless home network. DLink Router. Desktop PC, Windows 7, (64 bit) . Notebook, Vista, (32 bit). Epson Stylus C66, USB connection to Desktop. Trying to set up printer sharing for the notebook. On the desktop, keep running into error code 0x000006d9. I've Googled this problem and followed possible solutions, disabling firewalls, etc., no avail.
I've spent the last day running in circles trying to find a simple solution. I have two Win 7 machines located a few hundred miles apart. I currently have computer A (Local) connecting to computer B (remote) via UltraVNC. This works perfect except, when printing documents, I need to print to my local printer, which means on my remote machine I need to add a printer that is physically here locally. I've looked at IIS, IPP, Google Cloud drive, another service which costs. I think IPP could be the answer, but I can't find any step-by-step style of instructions out there. I have a limited understanding of this stuff, so really looking for a detailed solution.
I want to share a printer with another wired computer on my home network. Sorry haven't a clue and didn't find anything with the search except broad examples. Is there a tutorial. It would be from a Windows 7 machine on a wireless router to a W8 machine wired in.
In my office there are 2 desktop (Windows 7 & XP) computers and 2 laptops (Windows 7 & XP). These computers are connected to BSNL wifi router (ADSL) which has intermittent internet connection. I have also installed 2 printers on the desktop computers, one being deskjet (Windows 7) and the other laser (XP comp). On the XP system (desktop) i've enabled printer sharing.
PS: desktop computers are connected by RJ-45 and laptops by WiFi Issue :
successfully configured other PC for printer sharing. Now the issue is as i said earlier due to intermittent internet connection remaining 3 computers are unable to print laser printer when the net is down however it works fine.
What can be done..?? Also on the XP sys (desktop) i would also like to enable a particular folder to be shared.
