Setting Up A System Restore (similar To Laptops) On Desktop?
Jan 11, 2013
I want to install my windows 7,office,photoshop,drivers and some other software on my HDD and then save everything in a separate partition of my disk so that if I want to restore my system to the point where I have everything installed and running I can boot from the disk partitions and get it all done.Pretty much what laptops do with the system restore function on boot without needing a working OS.Simply a boot that will get my windows 7,office,photoshop,drivers and some other software installed again.Laptops have this function and I would like to have it on my desktop.
View 1 Replies
ADVERTISEMENT
Jan 11, 2013
I want to install my windows 7,office,photoshop,drivers and some other software on my HDD and then save everything in a separate partition of my disk so that if I want to restore my system to the point where I have everything installed and running I can boot from the disk partitions and get it all done.
Pretty much what laptops do with the system restore function on boot without needing a working OS. Simply a boot that will get my windows 7,office,photoshop,drivers and some other software installed again. Laptops have this function and I would like to have it on my desktop.
View 4 Replies
View Related
Sep 17, 2012
I recently did a system restore to factory settings and now my computer is running very slow. I have done all the windows updates and checked for any updates on the drivers. I also defraged it. I noticed that the physical memory is always very high between 85 and 100. The CPU is 10-50.
View 5 Replies
View Related
Mar 5, 2012
How can I create a desktop shortcut or similar to turn of the screen. And then how would I turn it back on again?I am trying to avoid any kind of power management except that which I want secondly I dont want to use the screen power button or that will be the next thing to fail I dont want to use the computer power button either if I can avoid it Power saving seems to be the only thing on this computer to give me grief, eg locks up after waking up from hibernation Win7x32 Prem sp1 genuine 60GB oztek ssd system drive with 16.4 GB free
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz, x64 Family 6 Model 15 Stepping 6
Processor Count: 2
RAM: 3070 Mb
[code]....
View 2 Replies
View Related
Dec 30, 2011
Is it possible to set up a shared printer with one laptop running Windows 7 and the other laptop running Vista? I have tried setting all the required sharing settings on both units, but without success!
View 4 Replies
View Related
Feb 2, 2013
any complete system backup software for win7 that works similar to the MAC time machine? I am looking for something that will back up every thing even software installed.
View 3 Replies
View Related
Mar 28, 2012
my desktop computer won't boot. When I turn it on it displays the welcome splash screen and then goes black. A message will then display that says CMD failed to start and then it will shut down. It does the same thing in safe mode as well.My question is. I have already set up the HD from the desktop as an external to my laptop so I could get files off it. Is there any way to do system restore on the hard drive when it is set as an external? Because I did this last night and I think if I restore the drive it will fix it.
View 2 Replies
View Related
Apr 10, 2012
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies
View Related
Aug 10, 2011
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies
View Related
Jan 23, 2013
I have setup a Homegroup for a desktop and 2 laptops. All computers have joined the Homegroup and the 2 laptops can see files on the other computers. However, when I try to access the other computers from the desktop, I'm asked to sign in. I enter the other computer user's name and since neither has a password I just click on OK. Then I get a message that says I don't have permission to access the files. Why am I asked to sign-in only on my desktop? Do I need to setup passwords on the laptops?
View 9 Replies
View Related
Dec 31, 2011
i was havin probs with my pc DELL isnpiron 17R ,,it was about missing of some storage drivers ,, i contacted a dell agent ; after he viewed the device manger and trying to reinstall them he couldn't and he told me that i've ghost or something in my registery and i need to do a restore to factory settings..i tried to shut down pc and turn it on again then i pushed the F8 button and i choosed " Repair Your Computer " and then i got " windows loading files " ,, stuck on it ,,,i tried to restart the pc and do it again but nothing i tried to remove battery and placed it again and retry but nothing i stucked on the same page.i used registry boost program on this site ,, after scan ,, i had a high damaged registery.
View 5 Replies
View Related
Dec 13, 2012
It was working great and I noticed that it would not recognize an external drive I was going to install some progs from, even though I can go in to Admin Tools and see it there, and then I tried taking it online and it says Windows Explorer not responding all the time, so I think the best bet at this point is to restore it back to out of the box condition.I just started tweaking on it, so it's not like I'll be losing much work.
View 9 Replies
View Related
Jan 30, 2013
im trying to restore my X51 to its factory state so when the SYSTEM RECOVERY OPTIONS comes up there is no alienrespawn or Dell DataSafe Restore and Emergency Backup, Iv gave it a shot from alienrespawn app when i click on restore its says that it will restore to Orginal factory state so restart after that the SYSTEM RECOVERY.
View 3 Replies
View Related
May 19, 2011
Last week I had a Win XP desktop computer. I use a Netgear WGR614 V6 router. I have fiber to the house and use a Cat5e Ethernet cable to connect the router to the wall jack and Cat5e from the router to the XP computer. I also used Wi-Fi to connect my Windows 7 x64 new laptop and an older XP laptop to the Internet. Everyone was happy and all worked well! I set-up a new Dell Windows 7 x64 desktop computer (it currently connects to the Internet just fine).
During the period I was setting up the new Windows 7 desktop I had both the XP desktop unit AND the new Windows 7 desktop connected to the router via Ethernet cables (at that time both laptops could connect to the Internet). After I had transferred the XP files to the Win 7 computer I just shut down the XP computer and removed the Ethernet cable linking the XP computer and the router - the new Windows 7 computer still connected to the Internet fine (as it still does today).
I made 2 changes to the router:
1) I had the XP desktop connected to Port 3 on the back of the router and had the Windows 7 x64 desktop connected to Port 2 on the router.
2) I used Cat5e cable on the XP desktop and used a Cat 6 cable to connect the new Windows 7 desktop unit to the router.
Both laptops see my router name but neither laptop can connect - even ran the troubleshooting routine. Could simply using Cat6 cable be causing a problem (Windows 7 desktop connects fine via the cable, laptops can not connect via Wi-Fi)? Surely just changing the port I connect the desktop cable to the router with wouldn't cause any problem would it? Do I need to do some sort of set-up or configuration to the new desktop unit to make the router Wi-Fi work for the laptops?
View 1 Replies
View Related
Sep 12, 2010
I have a Toshiba A505-S6040 with Windows 7 X64 and i need to restore it to factory setting but I do not how to do so!
View 7 Replies
View Related
Feb 12, 2012
How to backup setting for a program & restore them after format or unwanted change? like Media Player settings & preferences.
View 6 Replies
View Related
May 25, 2012
have formatted my hard disk and made partition in it to install new windows 7 professional now i cannot find the system recovery to go back to the factory setting status. Unfortunately i couldnt made the system recovery disk before installing the new windows.
View 4 Replies
View Related
Oct 18, 2011
how do i restore my computer back to factory setting.
View 1 Replies
View Related
Apr 14, 2012
how can i restore my acer aspire 5742G to factory settling
View 1 Replies
View Related
Nov 9, 2012
how can i restore dell inspiron n4030 to factor setting
View 1 Replies
View Related
Feb 1, 2013
previous owner died. Did not leave administrator password behind.i understand I will lose all the photos, etc. That is fine
View 3 Replies
View Related
Oct 4, 2011
I want to purchase a Fujistu laptop and would like to rate and compare with other brands to enable me take decision on purchase.
View 1 Replies
View Related
Jun 26, 2011
So I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
View 7 Replies
View Related
Feb 9, 2012
OK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies
View Related
Dec 28, 2011
I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies
View Related
Apr 17, 2012
not A legel verison of window 7. wont to restore to factory setings.
View 1 Replies
View Related
Jan 18, 2013
I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
View 9 Replies
View Related
Aug 31, 2012
System: Windows 7 Ultimate x86, Version 6.1 (Build 7601: Service Pack 1)What I'm looking for:I'm asking if anyone knows the precise location to the setting for the Desktop View icon size setting, either a settings file or registry location (NOTHING ELSE). This is viewable by: Right-clicking the desktop -> Selecting View -> Large Icons, Medium Icons, or Classic Icons Problem,Every time I set the option to Classic Icons, it resets to Medium Icons after rebooting.I'm NOT looking for any of the many ways to change this setting through means of:
1) Personalize -> Window Color -> Advanced Appearance settings -> Icon Size
2) Theme settings
3) Group Policy settings
4) Ease of Access -> Change Administrative Settings -> Apply all settings to the logon desktop (Remains unchecked)
5) Ctrl + Mouse-Wheel method of changing icon size
6) Rebuilding Icon Cache
7) HKEY_CURRENT_USERControl PanelDesktopWindowMetricsShell Icon Size
8) HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionThemesThemeChangesDesktopIconsTo reiterate
This is NOT a problem with setting the icon size or themes.Minimum icon size is 16, which on Medium is larger then Classic at 32 (default). It's NOT a problem with any 3rd party programs or services.I've tested with a selective startup disabling all non-Microsoft services and startup programs. Neither is it a malware or virus issue.I've explored this to no end. I've tried "sfc /scannow" to locate any altered/corrupt/missing system files as well, all are accounted for and working properly.I need to locate the exact location for this particular setting (View: Large/Medium/Classic) and find out why it will not save appropriately. I've been to so many forums with so many different fixes and none of them work. I believe I've covered all methods I've attempted but I might have missed one. I rarely have need to ask on forums, but I've exhausted my search abilities to no avail.
View 1 Replies
View Related
Jan 13, 2010
Just needed some help in setting up my desktop to stream media to ps3 My desktop is not wireless so i need to geta wireless card for it.
View 4 Replies
View Related
Feb 1, 2010
I like to use the Desktop folder to save items temporarily, but I keep a clean desktop background with no icons displayed. This option is accessed by right clicking the desktop and deselecting View>Show Desktop Icons. I've been doing this since I was using Windows Vista. My problem is that now my Windows 7 OS never remembers this setting. Whenever I turn my computer on the icons have reappeared. Additionally, when I go to deselect the option, I have to do it twice for it to take effect. Is this a known bug? It's really annoying, especially when there may be things on the desktop you don't want others to see when you login.
View 8 Replies
View Related
Nov 9, 2012
I work for a large corp which provides a standard image. I install this image, and wish to make changes particular to our area (About 8 offices)
Then burn the image for new workstations. I have been doing the desktop customization, show menus, desktop icon size, etc. I then go to C:Users and copy that customized user and rename it to default.
This works but has side effects, such as a new users default location for documents is always the original users. Plus some of our software fails. So I am now wanting to change the registry to do the same thing.
My question: Is there a way to edit the "Default User" in the registry so that it would be used for any new user? That way I could set the default registry and all new users would get those settings.
View 3 Replies
View Related
