Bug - Printer Randomly Sets Self To LPT Port?
May 31, 2012
I have had numerous customers who randomly can't print. Upon looking at their computer, the printer port will be selected on "LPT1" instead of the proper USB or TCP/IP port. I have not been able to find any correlation. This happens on Windows XP, Windows Vista, and Windows 7 on both business and residential computers. Originally I had thought that customers must be attempting repairs on their own. However, after 8 years and seeing this same thing happen to people who are afraid to even attempt to fix their own issue I believe that there must be some bug in Windows that causes this printer port to change.
View 3 Replies
ADVERTISEMENT
Nov 26, 2012
I had a Win 7 Ultimate 64bit on this very machine (the one in my preferences) for almost 3 years until the moment when I said to myself: OK, time to refresh. And that only because my port 80 would die sometimes....sometimes thrice an hour for 10-15 min, sometimes twice a day. But it would happen every day. I re-installed with the hope it was just a bad Win installation but it happened again after just an hour in. What I tried? Well, I certainly tried a new router. I knew it wouldn't since I also run Linux and OS X in home network and none is affected by this. I scanned old and new Win 7 with every possible malware finder, antivirus..etc. Even bought one (I have an "allergy" when it comes to A/Vs and such in general).. I went drastic today, I disconnected all devices (hdds, usbs, dvdroms, pcie) just to prove my point.. left a single 60 GB SSD with brand new win 7 with default drivers .. Took several hours but I still lost port 80 (it seems to be just port 80 since only browsers and windows LIVE are affected on my system)...Skype, FTP, rsync.. they'll all work just fine while nothing else web-wise does.
View 8 Replies
View Related
Sep 11, 2011
I can change the ip address of the printer but not the port name.
View 2 Replies
View Related
Jan 8, 2010
I have recently downloaded Dell AIO 946 printer driver - successfully - but when I request Windows 7 pc to print a document it cannot as it can't find the printer port. Being new to this I need guidance as to how to ascertain which port is correct. Printer has USB cable connected and from port tab is using LPT1 port is this the correct one? Please help - I am totally confused????
View 5 Replies
View Related
Feb 23, 2012
I have a new Toshiba Tecra R840 on Win7 64 bit. Much of the time, it is connected to a Toshiba docking station. My printer is an older, parallel-only HP LaserJet 6L. It's connected to the PC with a Dynex parallel-to-USB cable.
Here's the thing - Windows installs a new printer driver if I plug the printer cable into a different USB port on either the PC or the docking station. So far, I have three of them. What's worse, each printer driver will only print on the USB port that was used to create it. Quite a nuisance.
Can I do something to have a single printer driver work regardless of which USB port is used?
View 7 Replies
View Related
Nov 12, 2009
I am using an HP photosmart 1215 printer w/ HP 7200C driver. Printer is not printing. It was when I first installed it but not from internet. So, I started to fool with it and it quit. Might be the incorrect port because I changed port to USB port the changed it back to LPT! printer port. Now it won't print at all.
View 7 Replies
View Related
Sep 8, 2011
I have an HP pavillion notebook with Windows 7 and when trying to install my Canon MX860 printer, there are no ports showing at all, neither LPT or com ports. How can i install the ports so i can connect my printer?
View 1 Replies
View Related
Mar 23, 2011
I am trying to connect a Samsung 320 to the usb port of a Dlink router model number DIR-655 extreme
View 1 Replies
View Related
May 21, 2012
I can't get the USB cable on my printer to go into my USB porton my computer
View 7 Replies
View Related
Dec 11, 2012
After my computer stopped being able to print to my printer wirelessly (the printer isn't a wireless printer, but is wired to a wireless print server), I deleted the printer and tried to reinstall via the Add Printer Wizard. The printer wizard sees the printer on the network, but when I select it to install, it can't find the TCP/IP port and installation fails. How can this be?
I *can* print from this computer to the printer when connected directly via USB, and other computers can print to that printer wirelessly.
View 1 Replies
View Related
Dec 31, 2011
I was trying to add an HP 1200SE printer manually by way of linksys printer server(no Win 7 updated drivers). After configuring it, it didn't work so I attempted to redo entries. I now get a message "port already exists" after I deleted the previous install. How do I delete the already in use port so I can start over? Windows 7 64 bit on just acquired Z570 Lenovo laptop.
View 1 Replies
View Related
Jan 19, 2012
A client of mine uses an old dos based database program that can't print to any printer that uses a USB connection, but it works fine with parallel. I've just upgraded them to Windows 7, and some of their printers (which I didn't know at the time, I wish I did), don't have compatible Windows 7 drivers. Does anybody here know of a new model printer that still can use a parallel port and works with windows 7? I know HP Laserjet 1300 works, because they have several of those, but I'm hoping I can find actual new machines (it's a longshot, I know).
View 3 Replies
View Related
Nov 18, 2011
While my pc is on, I plug in the usb cable of my canon pixma MP276 printer. When the usb cable contact to the usb port, the lcd monitor goes into power saving mode/sleep mode (black) immediately and never turns on again no matter what I do (clicking on mouse, pressing keys on keyboard)I then need to restart the pc and everything will be normal.
View 6 Replies
View Related
May 10, 2011
I have win 7 64 bit desktop with only serial port, com1 i guess. I have an old HP 5P laserjet that has an lpt1 parallel printer cable securely attached to it. i tried to connect a couple of adapters to the cable and plug it into the com port. I don't get any errors and it doesn't print. I took the driver from the hp site. do i need to change the com port settings (baud rate, etc...? What am I missing?
View 4 Replies
View Related
Nov 20, 2011
When I attempted to turn it back on after having to cut the power, it wouldn't boot up at all.
After resetting the motherboard by taking out the battery, it did get into windows, I ran a startup repair, it got to a while in, then BSOD'ed. Eventually I managed to pin it down to the memory. I have 2x4GB and 2x2GB.
The PC boots up perfectly when only either of these is in, so it doesn't seem to be a problem with either of these sets.
When both are inserted, I get a blue screen when trying to boot up which points to a dll file in system32. Unfortunately I haven't noted the name down yet.
View 1 Replies
View Related
Jul 7, 2012
I am trying to use 2 sets of the insignia NS-NBBAR USB sound bar speakers on my laptop simultaneously. Both Speakers are recognized independently and I can choose one or the other to run, but I can find no way to link them both. Is there any way to set these up to run this way?
View 3 Replies
View Related
Jul 7, 2010
When I open my hard drive there are two sets of Program Files, Program Files and Program Files (X86). There are a few duplicate entries, but they have different created dates. Program Files has 24 folders, Program Files (X86) has 42 folders. Here is a screen shot of both. [URL]
View 7 Replies
View Related
Aug 18, 2009
I decided to only install the ethernet driver for the time being till i read more reports on the others. The ethernet driver is a good few months newer than whats provided in the Windows 7 RTM and works fine!
View 6 Replies
View Related
Aug 13, 2012
On a brand new laptop the user copied some word files over, and they opened on the new computer just fine. Then they copied some more .doc files and they could not open them, so (they claim) they choose word as the default file association (which is fine, except it should not have prompted for that in the first place). After that all the word document shortcuts they created on the desktop changed to a shortcut with IE's 'e' symbol - clicking them flashes up a screen that instantly goes away (ie I assume) and ie's download file dialog then opens. Further, an attempt to open ie acts the same way. Worse, running system restore does the same thing - flash, then ie files downloaded dialog - asking if I want to open one of the files listed (which are the .lnk files to the word documents on the desktop). So short of doing a full system restore, and also short of manually copying the registry files from the last restore point (which I'm not sure is even possible on a windows 7 drive) what can I do to resolve this mess?
View 3 Replies
View Related
Jun 25, 2012
How do I install the "Virtual printer port for USB" via command line in Windows XP and 7?
View 2 Replies
View Related
May 16, 2011
I recently installed new software that requires port 8080 to function. When I try to run the software I get an error that port 8080 is being used.How do I check to see what process is using port 8080 so that I can open up the port to run the software? MACHINE: Windows 7x64
View 9 Replies
View Related
Mar 24, 2012
I just bought a new computer from a computer shop. It is custom built and has the following:Has 8GB RAM, 3.3ghz intel core i5-2500k, windows 7, Intel HD graphics so upto 1.7GB max video memory, 1 VGA slot, 1 DVI slot.Just to confirm I checked in person and my tower has a VGA port and a DVI-D dual link port.
View 3 Replies
View Related
Jul 15, 2011
im having the port error of 01.
View 3 Replies
View Related
Jul 1, 2012
my 2 no usb port and lan port are not working other wise other 1 no usb port working this is new laptop i think driver not installed because when i connect the pendrive there was light showing in my pendrive.so i want drivr
View 2 Replies
View Related
Jun 30, 2012
my pc has been acting weird lately, it has began randomly crashing frequently. I turn it on and after 3 or so minutes of random activity it just freezes or gives me a blue screen error. Sometimes while playing BF3, it freezes.[CODE]
View 3 Replies
View Related
Mar 7, 2012
When the PC is on it will depending on how long its been on will randomy just shut off. When it shuts off, it "sometimes" reboots but most often it "tries" to reboot but fails and then stays off. After this failed try to reboot if I press the power button on the case and mobo, nothing.Now if I turn OFF the PSU leave it for a few minutes and come back turn the PSU switch on and press the power button the system comes to life for a second or two then dies and will no respond to the power buttons until I turn off the PSU again.I have gotten it up and running from this state by leaving it off and unplugged for a couple of hours. When I say the PC comes to life for a second or two, I mean the case fans. If I get it booted up the BIOS is reset to default for some reason. Also if it makes it to windows, the notification area icons also gets reset... very very odd.I have a short video of the problem, sorry for the darkness, I finally decided to video it and it was 11pm.PSU dying or Mobo. I dont have extra's so I cant test them.Forgot to mention, ive checked for heat problems but none of my temps are high, they are all normal and its a Antec 1200 with tons of air movement.Event Viewer shows nothing expect for unexpected shutdown. My event viewer is clean from any errors also. I do not get any BSOD and this is on a fresh Windows 7 install from late Jan.
View 8 Replies
View Related
Sep 4, 2009
ok well i spent about 3 hrs and i know its not my router and its the os and i did a fresh install too im on 7600 rtm, now i got windows firewall and defender disabled, i got nod32 antivirus not with a firewall just the anti, now i got utorrent, so i use utorrents port checker, the port works for it but if i add a port to my portforwarding on my router it dont work, according to this port scanner, now if i enter it and use it as my port in utorrent it works! but anything else doesnt i dont get it i got windows firewall disabled and all that i literally think theres a hidden firewall or a virus but i know there isnt a virus i also did a scan incase so any ideas?
View 1 Replies
View Related
Nov 30, 2009
I literally cant press the "change settings" button in windows 7, (im using windows 7 RC), its dull and theres nothing i can do, trying to connect to spore if your wondering.
View 3 Replies
View Related
Apr 26, 2011
having moved once and having add and removed computers from my home network, along with other changes, I now have a cluttered Printer Selection Window, by which I mean the window that pops up when I want to print a document. I have five versions of a Brother printer and four versions of an HP printer, and only one of each is actually good. How do I clean up that window by getting rid of those obsolete references that no longer work? It's ridiculous that they don't simply disappear when I select one of them as the default.
View 5 Replies
View Related
Dec 18, 2012
I bought a new wireless Epson Workforce 545 printer. It has worked without flow for quite some time (nearly a year). Now all the suddenly it wont print.I have it as a shared printer. There are three other family members on the network and all three others print without any problem. Mine worked fine and now wont print. It goes through the motions and then times out. All it says is "printer error".
View 8 Replies
View Related
Jun 25, 2012
download in my computer hp laserjet driver P1007
View 1 Replies
View Related