Activity On Port But No Network?
Dec 20, 2011
Came at work, the computer was working (it has been working 24/24 second week already) everything was fine, the internet was working no issues, but decided to restart because my Antivirus (NIS 2011) crashed and there was no icon on taskbar, after restart my network was dead, but there was network port activity (as you can see in the screen), what I tried:1. Disabled/Enabled the network2. Restarted in safe mode with networking3. Removed for about 20 seconds the power cable4. Removed/Added the Network from Device manager (with "remove driver" option)5. Downgraded to another driver from May 20116. Tried another cable7. Tried another port in the switch8. Changed from Automatic to Manual in Network Settings (added IP)9. Used the Diagnose utility (it said something wrong with the Driver) after this I downgraded to another driver and nothing changed10. Logged with another username11. All services related to network are started.All the above didn't solved my problem, what's wrong ? I really can't understand - I'm a SysAdmin myself but I never had a issue like this that I couldn't solve!
View 9 Replies
ADVERTISEMENT
Oct 30, 2009
So, 7 is reporting 4.5tb of network activity in 11 hours, with 600 gigs sent. I'm connected to my mac file server with roughly 1.8 TB of external hard drives (not NTFS either. mac formatted). It just keeps pumping out 5 megabytes a second and i have no idea where it's going. It doesn't show up in my resource manager, either, Any ideas?
View 4 Replies
View Related
Dec 5, 2009
I've been bothered by the lack of a visual indication of network activity on Windows 7, so I found and installed this:
Network Activity Indicator for Windows 7 - IT Samples
It is just the twin monitors like in XP, but even when I'm not doing anything on the internet, both monitors keep a steady beat in harmony of ~2 beats/s. Is this normal for a cable connection?
View 1 Replies
View Related
May 2, 2009
I remember seeing in a thread a long time ago on here that there was a way to get network activity lights in the system tray using a 3rd party application.
Does anyone know of one that works in Windows 7 and doesn't have much of an overhead? I have found some that add a new icon to the system tray, but it would be better if it could replace the existing network connection icon if possible.
View 5 Replies
View Related
Oct 28, 2011
I am connecting to my office computer from home using remote desktop connection.
My office computer is in a network under router. So I forwarded a port 3389 to my computer's internal ip address. Now I want to connect to another computer at my office from home. I tried forwarding the port 3990. But I was not able to access using remote desktop connect.
What should I do to access the second computer. Will 3390, 3391 ... will not work?
View 7 Replies
View Related
Dec 11, 2012
After my computer stopped being able to print to my printer wirelessly (the printer isn't a wireless printer, but is wired to a wireless print server), I deleted the printer and tried to reinstall via the Add Printer Wizard. The printer wizard sees the printer on the network, but when I select it to install, it can't find the TCP/IP port and installation fails. How can this be?
I *can* print from this computer to the printer when connected directly via USB, and other computers can print to that printer wirelessly.
View 1 Replies
View Related
Jul 17, 2012
I'm looking for really good network tools software, that can completely manage my LAN - monitor network activity on all PC's on the LAN (upload/download activity), port scanning, wireless management, assigning IP addresses and just all the general network tasks.
View 3 Replies
View Related
May 16, 2011
I recently installed new software that requires port 8080 to function. When I try to run the software I get an error that port 8080 is being used.How do I check to see what process is using port 8080 so that I can open up the port to run the software? MACHINE: Windows 7x64
View 9 Replies
View Related
Mar 24, 2012
I just bought a new computer from a computer shop. It is custom built and has the following:Has 8GB RAM, 3.3ghz intel core i5-2500k, windows 7, Intel HD graphics so upto 1.7GB max video memory, 1 VGA slot, 1 DVI slot.Just to confirm I checked in person and my tower has a VGA port and a DVI-D dual link port.
View 3 Replies
View Related
Jul 15, 2011
im having the port error of 01.
View 3 Replies
View Related
Jul 1, 2012
my 2 no usb port and lan port are not working other wise other 1 no usb port working this is new laptop i think driver not installed because when i connect the pendrive there was light showing in my pendrive.so i want drivr
View 2 Replies
View Related
Dec 1, 2012
Got an Acer laptop - haven't had any problems with it at all, until recently have been getting BSODs during a range of activities. I've run Memtest and that hasn't flagged up any problems.
View 2 Replies
View Related
Dec 15, 2011
I am having trouble lately with my disk drives. First of all the specs and then the problems :
[code]...
Second behavior, I think since last week, my activity led is pulsing every second and my main drive never seems to go to sleep while my three others do. This is bugging me deeply as I have no idea what exactly is goign on the system.There is NO viruses, NO malware. Windows has been reinstalled from scrath on fresh formatted partion. I've tried to boot the system in diagnotstic mode with the same issue. I do not know what is the problem but I find it very unpleasant.An other test I did, disconnect the RAID entirely and the pulsing continue.Do anyone of you have any idea of what's going on? Are both problem related somehow? Could it be a windows patch causing all of this as it started not so long ago while is was running perfectly before?
View 1 Replies
View Related
Oct 7, 2009
i performed a clean install of windows 7 rc but
my hard drive is busy when i don't use my computer and I
see that the light indicating that the hd is busy is blinking for couple of hours.
also my cpu usage is higher than xp and it makes my laptop's cpu very hot.
windows 7 makes my laptop very noisy.
View 5 Replies
View Related
Dec 1, 2011
I recently have a problem with my system. when I try to write a dvd it randomly freezes. sometimes it writes completely without error, and then the next time at the start of the sequence it locks up. the hdd activity led lihgts up, and the mouse is still responsive, but nothing seems to react anything. after some minutes the BSOD appears stating that a system crucial process had been unexpectedly quit or has been closed, and so on.. the same happens now if I try to update the dvd's firmware. it's an LG GH22NS40 writer with a grren power 550w psu and windows 7. previously i have nero 10 installed, but it's been deleted for now.
View 2 Replies
View Related
Feb 20, 2011
Whenever I start my windows hard drive led is constantly on and my laptop is slow as hell. If I continue using it sometimes I get blue screen but always I have to restart at last. Second time I boot it's ok. I disabled all unnecessary services. I had got the same problem with Vista. Now I upgraded to this. 7 was working fine but now the same problem is back. I use acer aspire 6920 with 4g ram and 250gb western digital. 2.00 Ghz core due.
View 15 Replies
View Related
Nov 28, 2011
My PC takes approximately 90 seconds to boot! The HDD constantly reads/writes when windows has booted.My system:Win7x64, i7 920, gtx 560, 6 gig ram, Western digital 650 gig HDD, Asus p6 deluxe MB.
View 2 Replies
View Related
Feb 22, 2011
Having an issue with intermittent BSOD with no common activity. Decided to turn blue during idle, surfing the web and playing games. I am not over clocking but i do have the RAM set to what OCZ recommended, DRAM frequency to 1333Mhz, CPU/NB voltage to 1.2v, DRAM Voltage 1.65v, DRAM timings to 9-9-9-20. Currents set up is as follows.
View 11 Replies
View Related
Jun 17, 2011
been watching that when the system wake up form hibernation, the LED that shows me the activity (I guess read/write..) of the hard disk is blinking, and keep doing that for several minutes (2- 6 minutes).The weird part is that the system is not going slow, when i open the task manager to see what is running, in processor usage the value is minimal, between 0 and 5%.In the process tab, the only thing using some CPU is one of the svchost.exe, it had an intermittent CPU usage of 0-3%, when i finished it, the LED stop blinking.
View 3 Replies
View Related
Nov 15, 2011
I'm having this weird problem with a PC trashing disk to the point where the PC becomes completely unresponsive, yet, perfmon does not seem to indicate any load. CPU is 1-3%, memory used <1.5GB. Disk-IO is indicated to <100 KB/sec, yet, and this is the weird bit, the blue line "highest active time" hammers on at 100% non-stop, and the HD activity light is on constant.
This is the hardware:
GIGABYTE Z68MA-D2H-B3 MB
i5-2400 CPU
2 x 4GB 1333MHz RAM
2 x 320GB WD SATA3 (3GB) disks connected to the MB 3GB SATA connectors.
It started with an upgrade from an AMD64 with an Asrock MB which had worked fine for years. First I just replaced the MB, CPU and RAM and after the usual complaints by MS, Windows 7 eventually settled and everything worked fine for a couple of days until suddenly the trashing that I described above started. I thought this was perhaps due to some leftover drivers from the AMD time, so I reformatted and reinstalled Windows 7. The trashing eventually goes away, for example if I leave it alone overnight, it might have calmed down in the morning, or if I turn off the PC and turn it on again, it may take anything from a couple of minutes to a couple of hours, but eventually it starts again.I already checked for malware. I've used Avast for years, but decided to switch to MSE to see if it made any difference (it didn't). I also ran Malwarebytes, also didn't find any problems. Windows 7 has been updated with all the latest updates and patches and SP1 as well as with the supplied Gigabyte Drivers.
View 7 Replies
View Related
Jun 20, 2012
My Windows is doing something when I do not use it. The disk makes a lot of noise (r/w) but as soon as I touch the mouse or keyboard it stops.What can be the reason ?
View 3 Replies
View Related
Oct 29, 2009
I installed Windows 7 RC. When ever I am booted into Windows 7 one of my hard drives (probably not system drive - sounds like my secondary storage drive) is constantly working. Not very much but still making sounds.
I have completely turned off indexation, there is no automatic defrag going on. I have set a constant size to the paging file and there is no antivirus activity going on. The hard drive is making noise even when the system is idle for a long time and also when I am using it.
The processes tab in the task monitor shows no process that is using CPU.
What can this hard drive activity be?
View 9 Replies
View Related
May 27, 2011
I currently connect my LG Flatron W2361V Monitor & my HD 5830 GPU with a HDMI cable, however some times when I turn my monitor off & come back to turn it on it takes a long time to pic up a signal & when it does system feels slow. However after checking the Catalyst Control Centre is showed my GPU Activity was 99% & it stops like that until I reboot.
View 4 Replies
View Related
Dec 27, 2011
Just got a new Acer aspire laptop for christmas. Everything works fine except that every time I turn it on or wake it up, there's about a 10 minute period of non-stop disk activity that causes every other application to come to a grinding hault.I downloaded process monitor and checked it out, and found the two most-accessed files are two TMP files called MSI7895.tmp and MSI8BDA.tmp, both in the Windows installer directory. No idea what either of these files are for.I'm thinking this has something to do with the tons of bloatware that came on this laptop. It's a 2.3 GHz, quad-core CPU with 4GB of RAM. I'd just really like to stop this so it doesn't take 3 minutes to open an Explorer window
View 3 Replies
View Related
Jun 22, 2011
For personal security reasons (two words: online poker,) I have embarked on a mission to make sure that there is 100% (or close to it..) certainty that no one can check or find out what applications were used and accessed on my computerother places / files might be checked in Windows 7 to check user / software activity, so I can deal with it accordingly! Encrypted operating system (True Crypt)Paging file removed and not beingsavedHibernation file removed and hibernation disabledDeleting MUI cacheDeleting prefetch filesUsing a .bat file that completely deletes ALL Windows 7 event logsTurning off memory dump fileDisabled and deleted windows restore pointsUsing CCleaner at the end of every sessionUsing Temporary File Cleaner after every sessionWiping free space (Gutman 35 passes) on my hard drive every few daysStuff like firewall/antivirus/anti-spyware/anti-malware/sandboxie I don't even mention because these are obvious.Now I need to make this clear: privacy is the most important thing for me in this case, so I am willing to sacrifice a lot of performance for it.
View 6 Replies
View Related
Feb 4, 2012
As of recently my computer turns off my wireless connection every time I am idle for more than 5 minutes it seems. After being idle for 5 minutes or so my wireless icon turns to: [URL]
When I unplug it, it still shows internet activity... I have no internal wireless cards in my system: [URL]
When I plug it back in it still shows the same wireless network connections screen. However I cannot plug into any network: [URL]
I tried rebooting my modem and router but that doesn't work either. Only thing that works is that I need to restart my computer.
View 9 Replies
View Related
Nov 30, 2012
I installed Windows 7 on my computer that was originally XP. Ever since then, I have 2 problems. First, my curser does whatever it wants, it jumps all over occasionally and highlights stuff so quickly while I am typing that when I press another key it is all lost. The second issue is that my mouse pad can no longer scroll.
View 2 Replies
View Related
Dec 9, 2012
like title say, i got a warning that wbengine have high disc activity... what is this and how do i fix it ?? it's located @ system32.
View 5 Replies
View Related
Mar 9, 2012
My XFX HD6950 1GB is running at 95%-99% when not performing any tasks. Here are some solutions i tried which did not work:
- I restarted my pc but that did not solve the problem.
- I tried to reinstall my driver but that also did not fix the problem.
The driver I am running for my GPU is the latest catalyst control centre. The problem started a few hours ago but my pc did not crash (yet).
View 6 Replies
View Related
Nov 19, 2009
When I play 1080p video and there is lot of disk activity at the same time (virus database updates, someone copy something trough local network, DVD is burning...anyway - lot of hard disk activity) then the video shows very poor performance - stops and starts for sec, then stops, slideshows and so on (also with sound). When this happens the CPU is about 50-60% so CPU is not an issue. I also set the media player priority to high in task manager - still bad performance when hard drive activity is high.
I have AMD CPU 3GHz, 3,5MB RAM, 1GB ATI Radeion HD4850
I DID NOT HAVE ANY SUCH ISSUE ON XP...whats the problem?
View 3 Replies
View Related
Jan 12, 2012
I've had the computer for about a year, a custom build...it's been working fine, then all of a sudden the problem started & now I'm suffering serious lag & slow down even with the most simple tasks (like clicking on the start icon) the HDD light is on continually & I can hear the drive clicking away. It never stops. (Starts when the windows loading screen comes on)Boot time is also incredibly slow around 10 minutes to boot up.I've just done a clean install of Windows 7 pro x 64 and the problem still persists...no other software installed other than my graphics & sound card drivers.The workstation isn't connected to the net I use a laptop for all that/this.On Task Manager my CPU is 0% & my Memory 6% which is fine..The drive is a Seagate Barracuda 500gb 7,200 SATA II.The programs causing this are mostly with-in "System" & SVChost" processes on the HDD.
For example:
Windows service profile
RtBackup
NTFS free space map
NTFS master file table
Winevt logs
I have read many threads about these type of problems but with never any clarification.I've got a ton of work to do...and I cant even open control panel under 1 minute right now.
View 3 Replies
View Related
